8321 Commits

Author SHA1 Message Date
jake
4656497567 Create the ofwcons device at SI_SUB_CONFIGURE instead of SI_SUB_DRIVERS,
after configure() has run.  Only create the device if ofwcons is the
highest priority console.  Make a dev alias with the same name as the
firmware output-device property.
2002-11-18 06:19:12 +00:00
jake
a5dc43bc55 Setup a default tty mode even if the device is not the console. Don't
reset the chip on open if we're not the console.

This fixes running a getty on ttya or ttyb if console input and output
devices are screen.
2002-11-18 05:56:43 +00:00
jake
bfe1b13adf Remove some unnecessary code. Make the device description nicer. Add a
delay in the right place to flush output before switching consoles.
2002-11-18 04:02:42 +00:00
jake
67c42884ec - Add support for ALT_BREAK_TO_DEBUGGER; this is the only reliable way to
trigger a breakpoint with this chip.
- Fiddle the right bits in the cn input and output routines to disable port
  interrupts and enable visibility of the masked interrupt status bits.
- Register a shutdown final event handler to put the chip back in the mode
  that the prom expects.
2002-11-17 16:00:51 +00:00
joe
2a39e4d9df Apply some fixups in the driver_t's.
Submitted by:	akiyama
MFC after:	3 days
2002-11-17 14:22:37 +00:00
joe
0108ac9770 Use a sysctl for controlling the debugging output.
Submitted by:	akiyama
2002-11-17 14:08:48 +00:00
joe
53f6e9ca99 Fix a typo in a console message.
Submitted by:	akiyama
MFC after:	3 days
2002-11-17 13:33:55 +00:00
imp
fc2660e346 DETACH_FORCE was removed recently. Remove it here, even though this
isn't supported.
2002-11-17 04:52:37 +00:00
mux
a090ac4048 Catch up with sam's changes to network interfaces. 2002-11-15 14:36:33 +00:00
sam
14c32b5f40 network interface driver changes:
o don't strip the Ethernet header from inbound packets; pass packets
  up the stack intact (required significant changes to some drivers)
o reference common definitions in net/ethernet.h (e.g. ETHER_ALIGN)
o track ether_ifattach/ether_ifdetach API changes
o track bpf changes (use BPF_TAP and BPF_MTAP)
o track vlan changes (ifnet capabilities, revised processing scheme, etc.)
o use if_input to pass packets "up"
o call ether_ioctl for default handling of ioctls

Reviewed by:	many
Approved by:	re
2002-11-14 23:54:55 +00:00
sam
10eb947d27 o track either_ifattach/ether_ifdetach API changes
o use if_input for input packet processing
o don't strip the Ethernet header for input packets
o use BPF_* macros bpf tapping
o call ether_ioctl to handle default ioctl case
o track vlan changes

Reviewed by:	many
Approved by:	re
2002-11-14 23:49:09 +00:00
cognet
f38cf8f61b Remove the remaining calls to free(), they are not needed anymore now
device_get_softc() is used.
2002-11-14 19:54:33 +00:00
mux
e428fcdb38 Fix printf() format errors.
Reviewed by:	imp
2002-11-14 14:02:32 +00:00
mux
ea51ce165d Pass correct parameters to bus_space_barrier() instead of 0
so that this code compiles on alpha.
2002-11-14 13:25:53 +00:00
imp
7e20f49bf6 MFp4:
o Add support for bus_child_present call by implementing that method for cbb.
2002-11-14 05:20:39 +00:00
imp
7ed8f6e719 MFp4:
o Make this code a little easier to understand by using simpler if
  statements, but nesting them.
2002-11-14 05:18:53 +00:00
imp
01eae78096 MFp4:
o Use 32-bit unsigned types for things that really are 32-bit quantities,
  not bus_addr_t.  These are not the same as a bus_addr_t, so don't use
  that here.  Harmless on i386, introduced problems on sparc64.

Submitted by: jhb
2002-11-14 05:15:50 +00:00
imp
36d61097ba Remove an impossible condition. pf->dev is always non-null here. 2002-11-14 05:13:52 +00:00
imp
8eb26d8733 MFp4:
o Add a diagnostic for an 'impossible' condition.
o Collapse common code.
2002-11-14 05:12:02 +00:00
imp
c35b7acf66 minor correction to comment 2002-11-14 05:10:16 +00:00
imp
33cb79e0fa Add second and thrid bus-toaster IDs 2002-11-14 05:08:22 +00:00
imp
99afd075e5 regen to 1.37 2002-11-14 05:07:20 +00:00
imp
bd7ef5583b Add a third aic-based bustoaster. 2002-11-14 05:06:25 +00:00
scottl
87416e10ed When parsing the CIS, if a BAR tuple is encountered, enable the corresponding
bit in the PCI command register for the device.  Otherwise, device drivers
that look at this register to see which types of BARs are usable will think
that none of them are.
This allows my Adaptec 1480A cardbus card to finally work.

Reviewed by:	imp
2002-11-13 22:53:48 +00:00
mux
4068f70fba Remove a bunch of #include "opt_pci.h". 2002-11-13 17:40:15 +00:00
mux
3c348eda15 Unbreak kernel build.
Submitted by:	Hiten Pandya <hiten@angelica.unixdaemons.com>
2002-11-13 17:34:12 +00:00
mdodd
a119655a5e Convert kernel compile option PCI_ALLOW_UNSUPPORTED_IO_RANGE to
a loader tunable hw.pci.allow_unsupported_io_range.

Submitted by:	 Hiten Pandya <hiten@angelica.unixdaemons.com>
Approved by:	 re (murray)
2002-11-13 09:42:25 +00:00
mdodd
3a3ea4b9da Staticize local variable.
Submitted by:	 Hiten Pandya <hiten@angelica.unixdaemons.com>
Obtained from:	 re (murray)
2002-11-13 09:40:09 +00:00
simokawa
36297badba - Add fwmem_xfer_req() and use this in other functions. 2002-11-12 17:19:21 +00:00
simokawa
8595cb5b46 - Remove unused code.
- Fix style.
2002-11-12 17:16:20 +00:00
simokawa
86aed55239 fix wording. 2002-11-12 17:11:32 +00:00
simokawa
b445a4b51a Split userland services to fwdev.c. 2002-11-12 15:22:19 +00:00
simokawa
f4a7469d8f Use struct fw_device in fwmem.c
- specify fwmem target by EUI64.
- fw_noderesolve returns struct fw_device rather than dst.
- include struct firewire_comm in struct fw_device.
2002-11-12 13:49:17 +00:00
simokawa
6262082ff1 Add a prototype for suspend/resume. 2002-11-12 13:46:09 +00:00
simokawa
7c6dbbe64b Change interface of fwmem_read_*() functions to be usable from other part
of the module.
2002-11-12 11:15:01 +00:00
simokawa
664569e8ec Change interface of fwmem_read_*() functions to be usable from other part
of the module.
2002-11-12 11:08:50 +00:00
scottl
18271b238a Use better return types and a couple of casts to eliminate warnings on
alpha.  This will take the file out of sync with the private version
that we maintain, but alpha tinderbox has been broken for too long.

Tested on: i386, sparc64, alpha
2002-11-12 10:22:49 +00:00
simokawa
3b7ac3a4f9 - clean up 2002-11-12 10:02:50 +00:00
scottl
55d3589a83 Fix two typos from the previous commit. This code is definitely infectious. 2002-11-12 09:45:59 +00:00
scottl
57f021e104 Step one of cleaning and fixing cardbus:
- Fix some especially bad style in the CIS BAR tuple parsing code.
 - activate Option ROMS correctly.
 - de-obfuscate the Option ROM image selection code.
 - Fix mis-interpretation of the PCI spec that prevented Option ROMs whose
   CIS section wasn't in the first image from working.
 - Fix mis-interpretation of the PCI spec that prevented CIS's mapped into
   MEMIO space from working at all.
 - Reject invalid CIS pointers.

Reviewed by:	imp
2002-11-12 08:23:27 +00:00
simokawa
faf37223df - Remove unused code.
- Style fixes.
2002-11-12 05:52:01 +00:00
simokawa
af05a61150 Restrict process count in fwohci_arcv() and fwohci_ircv(). 2002-11-12 04:54:30 +00:00
mux
873c175b8f Capitalize the first letter of device descriptions
for consistency with the rest of the drivers.
2002-11-11 15:26:08 +00:00
tmm
1d05c95940 Declare the snp ioctl()s to work on udev_t, since that is what they
really do and dev_t is defined differently in kernel and userland.
Return a correctly formed udev from SNPGTTY.

Reviewed by:	dd
2002-11-11 10:45:31 +00:00
mux
b45f2ba21c Warning fixes. 2002-11-11 10:28:44 +00:00
mux
cff6ce6fdb Warning fix. 2002-11-11 10:17:01 +00:00
mdodd
55c878faa1 Replace {disable,enable}_intr() with critical_{enter,exit}(). 2002-11-10 03:45:49 +00:00
alfred
533541c47b Fix instances of macros with improperly parenthasized arguments.
Verified by: md5
2002-11-09 12:55:07 +00:00
jhb
686416bfa5 Fix some sizeof(int) != sizeof(void *) warnings. 2002-11-08 21:30:26 +00:00
jhb
eb9c5b7d92 - Move opt_fb.h earlier so it covers included headers.
- Update cdevsw.  Block majors are out, kqfilters are in.
- No need to bzero softc's that we get from new-bus.  They come that way to
  begin with.
2002-11-08 21:10:53 +00:00