On some UEFI implementations the ConsOut EFI variable is not a device
path end type so we never move to the next node. Fix this by always
incrementing the device path node pointer, with a sanity check that
the node length is large enough so no two nodes overlap.
While here return failure on malloc failure rather than a NULL pointer
dereference.
Reviewed by: tsoome, imp (previous version)
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D25202
Assume gcc is at least 6.4, the oldest xtoolchain in the ports tree.
Assume clang is at least 6, which was in 11.2-RELEASE. Drop conditions
for older compilers.
Reviewed by: imp (earlier version), emaste, jhb
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D24802
These mappings are never visible to userspace as they get replaced when
the amd64 pmap is bootstrapped, but there is no need to set PG_U in the
first place.
Reviewed by: alc, kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24547
The vectx API, computes the hash for verifying a file as it is read.
This avoids the overhead of reading files twice - once to verify, then
again to load.
For doing an install via loader, avoiding the need to rewind
large files is critical.
This API is only used for modules, kernel and mdimage as these are the
biggest files read by the loader.
The reduction in boot time depends on how expensive the I/O is
on any given platform. On a fast VM we see 6% improvement.
For install via loader the first file to be verified is likely to be the
kernel, so some of the prep work (finding manifest etc) done by
verify_file() needs to be factored so it can be reused for
vectx_open().
For missing or unrecognized fingerprint entries, we fail
in vectx_open() unless verifying is disabled.
Otherwise fingerprint check happens in vectx_close() and
since this API is only used for files which must be verified
(VE_MUST) we panic if we get an incorrect hash.
Reviewed by: imp,tsoome
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org//D23827
smbios used to be an i386 only kinda weird quirk to the x86
architecture. But UEFI picked it up, dusted it off and now it's many
other locations. Make it base technology by moving it to libsa and
fixing up the compliation. The code has issues with unaligned access
still, but that will be addressed in a followup commit.
Differential Revision: https://reviews.freebsd.org/D23660
Create a ptov() function. It's basically the same as the btx PTOV
macro, but works everywhere. smbios needs this to translate addresses,
but the translation differs between BIOS booting and EFI booting. Make
it a function so one smbios.o can be used everywhere. Provide
definitions for it in the two loaders affected.
Differential Revision: https://reviews.freebsd.org/D23660
We still need to set the hooks to prevent improper manipulations thereafter
at the loader prompt, but as it is we're actively preventing loaddev from
being set correctly in some circumstances (ZFS in particular) and doing more
work than needed with currdev -- that hook in particular validates it as a
correct device, which we can assume isn't needed in this context.
Reviewed by: imp, sigsys@gmail.com
Submitted/Diagnosed by: sigsys@gmail.com
Differential Revision: https://reviews.freebsd.org/D23390
Update a bunch of Makefile.depend files as
a result of adding Makefile.depend.options files
Reviewed by: bdrewery
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D22494
With a very large kernel or module the staging area may be too small to
hold it. When this is the case try to allocate more space before failing
in the efi copyin/copyout/readin functions.
Reviewed by: imp, tsoome
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22569
In the EFI implementation in U-Boot no ConOut efi variable is created,
this cause loader to fallback to TERM_EMU implementation which is very
very very slow (and uses the ConOut device in the system table anyway).
The UEFI spec aren't clear as if this variable needs to exists or not.
Reviewed by: imp, kevans
In case of efi console having serial backend (video + serial or only serial),
we need to stick with old emulator till we can draw console.
Eventually we would need to get console terminal emulator to be removed
from serial console because the serial link already has the terminal.
However, we need to implement comconsole on all efi platforms first, then
we need the ability to draw console, so we do not have to use SimpleTextOutput
protocol (which will write both on video and serial in case of multiplexed
ComOut).
Differential Revision: https://reviews.freebsd.org/D22161
PATH_BOOTABLE_TOKEN can be set to a non-standard
path that identifies a device as bootable.
Reviewed by: kevans, bcran
Differential Revision: https://reviews.freebsd.org/D22062
PATH_BOOTABLE_TOKEN can be set to a non-standard
path that identifies a device as bootable.
Reviewed by: kevans, bcran
Differential Revision: https://reviews.freebsd.org/D22062
Replace mini cons25 emulator with teken, this does enable us proper console
terminal for loader and will make it possible to implement different
back end callbacks to draw to screen.
At this time we still only "draw" in text mode.
Reduce the size of the EFI_STAGING area we allocate on arm to 32. On arm SBC
such as the NanoPi-NEOLTS the staging area allocation will fail on the 256MB
model with a staging size of 64.
Reviewed by: bcran, manu
Approved by: bz (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D21016
The chain command can be used to chain load another binary.
If veriexec is enabled we should verify it first.
Note that on EFI systems the verification was already done
through firmware, assuming that Secure Boot was enabled there.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: sjg
MFC after: 1 week
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D20952
The HandleProtocol() is deprecated interface and we should use OpenProtocol()
instead. Moreover, in some firmware implementation(s), the HandleProtocol()
does return device path using static storage, so we can not keep the value
returned there. With same firmware, the OpenProtocol() does return data we
do not need to clone.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D21162
To avoid failures when the large 18MB nvidia.ko module is being loaded,
increase EFI_STAGING_SIZE from 64MB to 100MB on x64 systems.
Leave the other platforms at 64MB.
The code in efihttp.c was assuming that dv_open wouldn't be called if
dv_init failed. But the dv_init return value is currently ignored.
Add a new variable, `efihttp_init_done` and only proceed in dv_open if
it's true. This fixes the loader on systems without efi http support.
Add support for an HTTP "network filesystem" using the UEFI's HTTP
stack.
This also supports HTTPS, but TianoCore EDK2 implementations currently
crash while fetching loader files.
Only IPv4 is supported at the moment. IPv6 support is planned for a
follow-up changeset.
Note that we include some headers from the TianoCore EDK II project in
stand/efi/include/Protocol verbatim, including links to the license instead
of including the full text because that's their preferred way of
communicating it, despite not being normal FreeBSD project practice.
Submitted by: scottph
Reviewed by: imp, bcran
Differential Revision: https://reviews.freebsd.org/D20643
Small mis-merge from multiple WIP resulted in block io media handles getting
double-initialized. This resulted in some installations oddly landing at the
mountroot prompt.
Reported by: ler
Reviewed by: imp
When set, we ignore all the hints that the UEFI boot manager has set
for us. We also always fail back to the OK prompt when we can't find
the right thing to boot rather than failing back to the UEFI boot
manager. This has the side effect of also expanding the cases where we
fail back to the OK prompt to include when we're booted under UEFI,
but UEFI::BootCurrent isn't set in the environment and we can't find a
proper place to boot from.
Reviewed by: bcran
Differential Revision: https://reviews.freebsd.org/D20016
If uefi_rootdev is set in the environment, then treat it like a device
path. Convert the string to a device path and see if we can find a
device that matches. If so, use that device at our root dev no matter
what. If it's bad in any way, the boot will fail.
Reviewed by: bcran
Differential Revision: https://reviews.freebsd.org/D20016
partition as if it were on the command line.
Fetch FreeBSD-LoaderEnv UEFI enviornment variable. If set, read in
loader environment variables from it. Otherwise read in
/efi/freebsd/loader.env. Both are read relative to the device
loader.efi loaded from (they aren't full UEFI device paths)
Next fetch FreeBSD-NextLoaderEnv UEFI environment variable. If
present, read the file it points to in as above and delete the UEFI
environment variable so it only happens once.
This lets one set environment variables in the bootloader.
Unfortunately, we don't have all the mechanisms in place to parse the
file, nor do we have the magic pattern matching in place that
loader.conf has. Variables are of the form foo=bar. No quotes are
supported, so spaces aren't allowed, for example. Also, variables like
foo_load=yes are intercepted when we parse the loader.conf file and
things are done based on that. Since those aren't done here, variables
that cause an action to happen won't work.
Reviewed by: bcran
Differential Revision: https://reviews.freebsd.org/D20016
illumos update: https://www.illumos.org/issues/10598
Add map-vdisk and unmap-vdisk commands to create virtual disk interface on top of file. This will allow to use disk image from file system to load and start the kernel.
By mapping file, we create vdiskX device, the device will be listed by lsdev [-v] and can be accessed directly as ls vdisk0p1:/path or can be used as value for currdev variable.
vdisk strategy function does not use bcache as we have bcache used with backing file. vdisk can be unmapped when all consumers have closed the open files.
In first iteration we do not support the zfs images because zfs pools do keep the device open (there is no "zpool export" mechanism). Adding zfs support is relatively simple, we just need to run zfs disk probe after mapping is done.
Differential Revision: https://reviews.freebsd.org/D19733
snagging them from UEFI BIOS). Call the device type init routines
earlier as well, as they don't depend on how the console is
setup. This will allow us to read files earlier in boot, so any rare
error messages that this might move only to the EFI console will be an
acceptable price to pay. Also tweak the order of has_kbd so it resides
next to the rest of the console code. It needs to be after we initialize
the buffer cache.
When efi_autoload is called it will call fdt_setup_fdtp which setup the
dtb and overlays. If a user already loaded at dtb or overlays or just
printed the efi provided dtb, this will re-setup everything and also
re-applying the overlays.
Test that everything is setup before doing it again.
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D20059
Get the information from the image that we're booting and store it in
a global variable. Prefer using this to passing it around. Remove the
special case for zfs that set the preferred boot handle by having it
uses this global variable diretly.
Reviewed by: kevans@
Differential Revision: https://reviews.freebsd.org/D20015
There's no reason we can't setup the console first thing after the
arch flags are setup. We set it undconditionally to efi. This is a
good default, and will get us error messages to at least the efi
console no matter what. This will also prime the pump so that as other
variables are set, they will take effect and the console will be
correct as soon as those env vars are set. Also remove the redundant
setting of the console to efi when we know the console is efi.
Differential Revision: https://reviews.freebsd.org/D20014
There's a number of EFI_ZFS_BOOT #ifdefs that aren't needed, or can be
eliminated with some trivial #defines. Remove the EFI_ZFS_BOOT ifdefs
that aren't needed. Replace libzfs.h include which is not safe to
include without EFI_ZFS_BOOT with efizfs.h which is and now
conditionally included libzfs.h. Define efizfs_set_preferred away
and define efi_zfs_probe to NULL when ZFS is compiled out.
The values of the d_slice and d_partition fields of a disk_devdesc have a
few values with special meanings in the disk_open() routine. Through various
evolutions of the loader code over time, a d_partition value of -1 has
meant both "use the first ufs partition found in the bsd label" and "don't
open a bsd partition at all, open the raw slice."
This defines a new special value of -2 to mean open the raw slice, and it
gives symbolic names to all the special values used in d_slice and
d_partition, and adjusts all existing uses of those fields to use the new
constants.
The phab review for this timed out without being accepted, but I'm still
citing it below because there is useful commentary there.
Differential Revision: https://reviews.freebsd.org/D19262
UEFI related headers were copied from edk2.
A new build option "MK_LOADER_EFI_SECUREBOOT" was added to allow
loading of trusted anchors from UEFI.
Certificate revocation support is also introduced.
The forbidden certificates are loaded from dbx variable.
Verification fails in two cases:
There is a direct match between cert in dbx and the one in the chain.
The CA used to sign the chain is found in dbx.
One can also insert a hash of TBS section of a certificate into dbx.
In this case verifications fails only if a direct match with a
certificate in chain is found.
Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: sjg
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D19093
The call to BS->AllocatePages can cause the memory map to become framented,
causing BS->GetMemoryMap to return EFI_BUFFER_TOO_SMALL more than once. For
example this can happen on the MinnowBoard Turbot, causing the boot to stop
with an error. Avoid this by calling GetMemoryMap in a loop.
Reviewed by: imp, tsoome, kevans
Differential Revision: https://reviews.freebsd.org/D19341
ExitBootServices terminates all boot services including console access.
Attempting to call printf afterwards can result in a crash, depending on the
implementation.
Move any printf statements to before we call bi_load, and remove any that
depend on calling bi_load first.
Reviewed by: imp, tsoome
Differential Revision: https://reviews.freebsd.org/D19374
r328169 removed the copy of bootinfo that would've made this somewhat
functional. However, this is irrelevant- earlier work in r292338 was done to
exit boot services in the MI bi_load() rather than having N copies of the
GetMemoryMap/ExitBootServices dance.
i386 never quite caught up to that; ldr_enter was still being called but
the prereq for that, ldr_bootinfo, was no longer. As a consequence, this
ExitBootServices() was being called with a mapkey=0, clearly bogus, and
reportedly breaking the boot in some instances.
Reported by: bcran
MFC after: 1 week
Use recent best practices for Copyright form at the top of
the license:
1. Remove all the All Rights Reserved clauses on our stuff. Where we
piggybacked others, use a separate line to make things clear.
2. Use "Netflix, Inc." everywhere.
3. Use a single line for the copyright for grep friendliness.
4. Use date ranges in all places for our stuff.
Approved by: Netflix Legal (who gave me the form), adrian@ (pmc files)
This update does add diag and debug capabilities to interpret the efi
variables, configuration and protocols (lsefi).
The side effect is that we add/update bunch of related headers.
