flag and use the same system.
This enables further fault locking improvements by allowing more faults to
proceed with a shared lock.
Reviewed by: kib
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D22116
stat() of one of the remaining names of the file does not show an
updated ctime (inode modification time) until several seconds after
the unlink() completes. The problem only occurs when the filesystem
is running with soft updates enabled. When running with soft updates,
the ctime is not updated until the soft updates background process
has settled all the needed I/O operations.
This commit causes the ctime to be updated immediately during the
unlink(). A side effect of this change is that the ctime is updated
again when soft updates has finished its processing because that
is the time that is correct from the perspective of programs that
look at the disk (like dump). This change does not cause any extra
I/O to be done, it just ensures that stat() updates the ctime before
handing it back.
PR: 241373
Reported by: Alan Somers
Tested by: Alan Somers
MFC after: 3 days
Sponsored by: Netflix
have been unlinked, but are still referenced by open file descriptors.
These inodes cannot be freed until the final file descriptor reference
has been closed. If the system crashes while they are still being
referenced, these inodes and their referenced blocks need to be
freed by fsck. By having them on a linked list with the head pointer
in the superblock, fsck can quickly find and process them rather
than having to check every inode in the filesystem to see if it is
unreferenced.
When updating the head pointer of this list of unlinked inodes in
the superblock, the superblock check-hash was not getting updated.
If the system crashed with the incorrect superblock check-hash, the
superblock would appear to be corrupted. This patch ensures that
the superblock check-hash is updated when updating the head pointer
of the unlinked inodes list.
There is no need to MFC as superblock check hashes first appeared in
13.0.
Tested by: Peter Holm
Sponsored by: Netflix
The softdep lock names were unusually long and tended to stick out in
lock profiling reports. Abbreviate them and make them consistent with
our conventional style for lock names.
Reviewed by: mckusick
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D22042
There are 3 counters modified all the time in this structure - one for
keeping the structure alive, one for preventing unmount and one for
tracking active writers. Exact values of these counters are very rarely
needed, which makes them a prime candidate for conversion to a per-cpu
scheme, resulting in much better performance.
Sample benchmark performing fstatfs (modifying 2 out of 3 counters) on
a 104-way 2 socket Skylake system:
before: 852393 ops/s
after: 76682077 ops/s
Reviewed by: kib, jeff
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21637
When softdep_fsync() is running, a caller must already started write
for the mount point. Since unmount or remount to ro suspends mount
point, it cannot run in parallel with softdep_fsync(), which makes
vfs_busy() call there not needed.
Doing blocking vfs_busy() there effectively causes lock order reversal
between vn_start_write() and setting MNTK_UNMOUNT, because
vfs_busy(mp, 0) sleeps waiting for MNTK_UNMOUNT becoming clear, while
unmount sets the flag and starts the suspension.
Note that all other uses of vfs_busy() in SU code are non-blocking.
Reported by: chs by mckusick
Reviewed by: mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Current implementation of vnode_create_vobject() and
vnode_destroy_vobject() is written so that it prepared to handle the
vm object destruction for live vnode. Practically, no filesystems use
this, except for some remnants that were present in UFS till today.
One of the consequences of that model is that each filesystem must
call vnode_destroy_vobject() in VOP_RECLAIM() or earlier, as result
all of them get rid of the v_object in reclaim.
Move the call to vnode_destroy_vobject() to vgonel() before
VOP_RECLAIM(). This makes v_object stable: either the object is NULL,
or it is valid vm object till the vnode reclamation. Remove code from
vnode_create_vobject() to handle races with the parallel destruction.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D21412
In ffs_valloc(), force reclaim existing vnode on inode reuse, instead
of trying to re-initialize the same vnode for new purposes. This is
done in preparation of changes to the vp->v_object lifecycle handling.
A new FFSV_REPLACE flag to ffs_vgetf() directs the function to
vgone(9) the vnode if found in vfs hash, instead of returning it.
Reviewed by: markj, mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D21412
After all the changes, its dynamic scope is same as for MNTK_UNMOUNT,
but to allow the syncer vnode to be re-installed on unmount failure.
But the case of syncer was already handled by using the VV_FORCEINSMQ
flag for quite some time.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
hash was computed and the time that the superblock was copied to a
buffer to be written to disk. The result was a failed superblock
check hash the next time that the superblock was read.
The fix is to compute the check hash after the superblock has been
copied to a buffer to be written.
PR: 236504
Reported by: Peter Holm
Tested by: Peter Holm
Sponsored by: Netflix
disk blocks, set the FORCE flag in the call to chkiq() or chkdq() since
the user is always allowed to return resources and hence there is no need
to check the user's credential .
Reported by: Christopher Krah, Thomas Barabosch, and Jan-Niclas Hilgert of Fraunhofer FKIE
Reported as: FS-1-UFS-1: Denial Of Service in mount (prison_priv_check)
Discussed with: kib
MFC: 1 week
Sponsored by: Netflix
r346932 replaced a call to vn_bmap_seekhole() with a call to
ufs_bmap_seekdata(). Although vn_bmap_seekhole() locks the vnode,
ufs_bmap_seekdata() assumes it is already locked.
This patch adds locking of the vnode before the ufs_bmap_seekdata() call.
If the vn_lock() call fails, it returns EBADF since that is the normal
error returned when a file system is forced dismounted and is already
listed as an error return in the lseek(2) man page.
Discussed with: markj
Reviewed by: kib
filesystems that have block pointers that are out-of-range for their
filesystem. These out-of-range block pointers are corrected by
fsck(8) so are only encountered when an unchecked filesystem is
mounted.
A new "untrusted" flag has been added to the generic mount interface
that can be set when mounting media of unknown provenance or integrity.
For example, a daemon that automounts a filesystem on a flash drive
when it is plugged into a system.
This commit adds a test to UFS/FFS that validates all block numbers
before using them. Because checking for out-of-range blocks adds
unnecessary overhead to normal operation, the tests are only done
when the filesystem is mounted as an "untrusted" filesystem.
Reported by: Christopher Krah, Thomas Barabosch, and Jan-Niclas Hilgert of Fraunhofer FKIE
Reported as: FS-14-UFS-3: Out of bounds read in write-2 (ffs_alloccg)
Reviewed by: kib
Sponsored by: Netflix
filesystem full message is sent to the offending process or the
kernel log if the offending process cannot be identified.
To prevent an explotion of messages, the kernel ppsratecheck()
function is used to limit the messages to one per second. This
revision changes the variable that tracks the rate of these messages
from a systemwide limit to a per-filesystem limit by moving it from
a global variable to a variable in the ufsmount structure.
Suggested by: kib
Reviewed by: kib
Sponsored by: Netflix
is to notify the kernel that the file system is untrusted and it
should use more extensive checks on the file-system's metadata
before using it. This option is intended to be used when mounting
file systems from untrusted media such as USB memory sticks or other
externally-provided media.
It will initially be used by the UFS/FFS file system, but should
likely be expanded to be used by other file systems that may appear
on external media like msdosfs, exfat, and ext2fs.
Reviewed by: kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20786
Assert that the per-mountpoint softdep mutex is held in modified
functions that do not already have this assertion. No functional
change intended.
Reviewed by: kib, mckusick (previous version)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20741
This ioctl exposes VOP_BMAP information to userland. It can be used by
programs like fragmentation analyzers and optimized cp implementations. But
I'm using it to test fusefs's VOP_BMAP implementation. The "2" in the name
distinguishes it from the similar but incompatible FIBMAP ioctls in NetBSD
and Linux. FIOBMAP2 differs from FIBMAP in that it uses a 64-bit block
number instead of 32-bit, and it also returns runp and runb.
Reviewed by: mckusick
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20705
rename the source to gsb_crc32.c.
This is a prerequisite of unifying kernel zlib instances.
PR: 229763
Submitted by: Yoshihiro Ota <ota at j.email.ne.jp>
Differential Revision: https://reviews.freebsd.org/D20193
vtruncbuf takes a "struct ucred*" argument. AFAICT, it's been unused ever
since that function was first added in r34611. Remove it. Also, remove some
"struct ucred" arguments from fuse and nfs functions that were only used by
vtruncbuf.
Reviewed by: cem
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20377
Similar to r348026, exhaustive search for uses of CTRn() and cross reference
ktr.h includes. Where it was obvious that an OS compat header of some kind
included ktr.h indirectly, .c files were left alone. Some of these files
clearly got ktr.h via header pollution in some scenarios, or tinderbox would
not be passing prior to this revision, but go ahead and explicitly include it
in files using it anyway.
Like r348026, these CUs did not show up in tinderbox as missing the include.
Reported by: peterj (arm64/mp_machdep.c)
X-MFC-With: r347984
Sponsored by: Dell EMC Isilon
kern_execve() locks text vnode exclusive to be able to set and clear
VV_TEXT flag. VV_TEXT is mutually exclusive with the v_writecount > 0
condition.
The change removes VV_TEXT, replacing it with the condition
v_writecount <= -1, and puts v_writecount under the vnode interlock.
Each text reference decrements v_writecount. To clear the text
reference when the segment is unmapped, it is recorded in the
vm_map_entry backed by the text file as MAP_ENTRY_VN_TEXT flag, and
v_writecount is incremented on the map entry removal
The operations like VOP_ADD_WRITECOUNT() and VOP_SET_TEXT() check that
v_writecount does not contradict the desired change. vn_writecheck()
is now racy and its use was eliminated everywhere except access.
Atomic check for writeability and increment of v_writecount is
performed by the VOP. vn_truncate() now increments v_writecount
around VOP_SETATTR() call, lack of which is arguably a bug on its own.
nullfs bypasses v_writecount to the lower vnode always, so nullfs
vnode has its own v_writecount correct, and lower vnode gets all
references, since object->handle is always lower vnode.
On the text vnode' vm object dealloc, the v_writecount value is reset
to zero, and deadfs vop_unset_text short-circuit the operation.
Reclamation of lowervp always reclaims all nullfs vnodes referencing
lowervp first, so no stray references are left.
Reviewed by: markj, trasz
Tested by: mjg, pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
Differential revision: https://reviews.freebsd.org/D19923
directory entries that is caused by uninitialized directory entry
padding written to the disk. It can be viewed by any user with read
access to that directory. Up to 3 bytes of kernel stack are disclosed
per file entry, depending on the the amount of padding the kernel
needs to pad out the entry to a 32 bit boundry. The offset in the
kernel stack that is disclosed is a function of the filename size.
Furthermore, if the user can create files in a directory, this 3
byte window can be expanded 3 bytes at a time to a 254 byte window
with 75% of the data in that window exposed. The additional exposure
is done by removing the entry, creating a new entry with a 4-byte
longer name, extracting 3 more bytes by reading the directory, and
repeating until a 252 byte name is created.
This exploit works in part because the area of the kernel stack
that is being disclosed is in an area that typically doesn't change
that often (perhaps a few times a second on a lightly loaded system),
and these file creates and unlinks themselves don't overwrite the
area of kernel stack being disclosed.
It appears that this bug originated with the creation of the Fast
File System in 4.1b-BSD (Circa 1982, more than 36 years ago!), and
is likely present in every Unix or Unix-like system that uses
UFS/FFS. Amazingly, nobody noticed until now.
This update also adds the -z flag to fsck_ffs to have it scrub
the leaked information in the name padding of existing directories.
It only needs to be run once on each UFS/FFS filesystem after a
patched kernel is installed and running.
Submitted by: David G. Lawrence <dg@dglawrence.com>
Reviewed by: kib
MFC after: 1 week
This version fixes the problems identified in r345244.
Reviewed by: kib
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19598
In particular, ensure that writers are not unleashed before SU
structures are initialized. Also, correctly handle MNT_ASYNC before
this.
Reported and tested by: pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
the file associated with the given file descriptor.
Reviewed by: kib, asomers
Reviewed by: cem, jilles, brooks (they reviewed previous version)
Discussed with: pjd, and many others
Differential Revision: https://reviews.freebsd.org/D14567
This bug was introduced with the change to use softdep_bp_to_mp()
in January 2018 changes -r327723 and -r327821. The softdep_bp_to_mp()
function failed to include VSOCK as one of the valid cases.
Although local-domain sockets do not allocate blocks in the filesystem,
they will allocate blocks if they use extended attributes (such as
ACLs). Thus, softdep_bp_to_mp() needs to return a non-NULL mount
pointer when presented with a socket vnode so that the soft updates
write complete will properly process the soft updates structures
associated with the extended attribute blocks. It was the failure
to process these soft updates structures, thus leaving them hanging
off the buffer, which lead to the "panic: softdep_deallocate_dependencies:
dangling deps" when trying to clean up the buffer after it was written.
PR: 230962
Reported by: 2t8mr7kx9f@protonmail.com
Reviewed by: kib
Tested by: Peter Holm
MFC after: 1 week
Sponsored by: Netflix
The old implementation, at the VFS layer, would map the entire range of
logical blocks between the starting offset and the first data block
following that offset. With large sparse files this is very
inefficient. The VFS currently doesn't provide an interface to improve
upon the current implementation in a generic way.
Add ufs_bmap_seekdata(), which uses the obvious algorithm of scanning
indirect blocks to look for data blocks. Use it instead of
vn_bmap_seekhole() to implement SEEK_DATA.
Reviewed by: kib, mckusick
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19598
kernel vn_printf() routine when printing out vnodes associated with
a UFS filesystem) to also include the inode's link count, effective
link count, generation number, owner, group, flags, size, and for
UFS2 filesystems, the extent size.
Sponsored by: Netflix
Implement ffs_getpages_async(), which when possible calls the asynchronous
flavor of the generic pager's getpages function. When the underlying
block size is larger than the system page size, however, it will invoke
the (synchronous) buffer cache pager, followed by a call to the client
completion routine. This retains true asynchronous completion in the most
common (block size <= page size) case, which is important for the performance
of the new sendfile(2). The behavior in the larger block size case mirrors
the default implementation of VOP_GETPAGES_ASYNC, which most other
filesystems use anyway as they do not override the getpages_async method.
PR: 235708
Reported by: pho
Reviewed by: kib, glebius
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D19340
shorter than its size resulting in a hole as its final block (which
is a violation of the invarients of the UFS filesystem).
Soft updates will always ensure that the file size is correct when
writing inodes to disk for files that contain only direct block
pointers. However soft updates does not roll back sizes for files
with indirect blocks that it has set to unallocated because their
contents have not yet been written to disk. Hence, the file can
appear to have a hole at its end because the block pointer has been
rolled back to zero when its inode was written to disk. Thus,
fsck_ffs calculates the last allocated block in the file. For files
that extend into indirect blocks, fsck_ffs checks for a size past
the last allocated block of the file and if that is found, shortens
the file to reference the last allocated block thus avoiding having
it reference a hole at its end.
Submitted by: Chuck Silvers <chs@netflix.com>
Tested by: Chuck Silvers <chs@netflix.com>
MFC after: 1 week
Sponsored by: Netflix
January 2018 changes -r327723 and -r327821. The softdep_bp_to_mp()
function failed to include VFIFO as one of the valid cases.
Although fifo's do not allocate blocks in the filesystem, they will
allocate blocks if they use extended attributes (such as ACLs). Thus,
softdep_bp_to_mp() needs to return a non-NULL mount pointer when
presented with a fifo vnode so that the soft updates write complete
will properly process the soft updates structures associated with the
extended attribute blocks. It was the failure to process these soft
updates structures, thus leaving them hanging off the buffer, which
lead to the "panic: softdep_deallocate_dependencies: dangling deps"
when trying to clean up the buffer after it was written.
PR: 230962
Reported by: 2t8mr7kx9f@protonmail.com
Reviewed by: kib
Tested by: Peter Holm
MFC after: 1 week
Sponsored by: Netflix
set of known soft dependency data structures now includes: sd_worklist,
sd_inodedep, sd_allocdirect, sd_allocindir, and sd_mkdir. DDB can
also print lists of sd_allinodedeps, sd_mkdir_list, and sd_workhead.
The sd_workhead script is useful for listing all the dependencies
associated with a buffer, e.g. bp->b_dep.
Prefix the soft dependency show names with sd_ so that they sort
together when listed by DDB's "show help" and to distinguish them
from other data structures printable by DDB.
Sponsored by: Netflix
o In vm_pager_bufferinit() create pbuf_zone and start accounting on how many
pbufs are we going to have set.
In various subsystems that are going to utilize pbufs create private zones
via call to pbuf_zsecond_create(). The latter calls uma_zsecond_create(),
and sets a limit on created zone. After startup preallocate pbufs according
to requirements of all pbuf zones.
Subsystems that used to have a private limit with old allocator now have
private pbuf zones: md(4), fusefs, NFS client, smbfs, VFS cluster, FFS,
swap, vnode pager.
The following subsystems use shared pbuf zone: cam(4), nvme(4), physio(9),
aio(4). They should have their private limits, but changing that is out of
scope of this commit.
o Fetch tunable value of kern.nswbuf from init_param2() and while here move
NSWBUF_MIN to opt_param.h and eliminate opt_swap.h, that was holding only
this option.
Default values aren't touched by this commit, but they probably should be
reviewed wrt to modern hardware.
This change removes a tight bottleneck from sendfile(2) operation, that
uses pbufs in vnode pager. Other pagers also would benefit from faster
allocation.
Together with: gallatin
Tested by: pho
vnodeops make FFS1's fifoops1 use ffs_lock. Also delete ffs_reallocblks
from fifoops1 which is needed only for fifoops2 because of its
support for extended attributes that need to allocate blocks.
Suggested by: kib
If invalid, return EINVAL. Note that inode check-hashes greatly
reduce the chance that these errors will go undetected.
Reported by: Christopher Krah <krah@protonmail.com>
Reported as: FS-5-UFS-2: Denial Of Service in nmount-3 (ffs_read)
Reviewed by: kib
MFC after: 1 week
Sponsored by: Netflix
M sys/fs/ext2fs/ext2_vnops.c
M sys/kern/vfs_subr.c
M sys/ufs/ffs/ffs_snapshot.c
M sys/ufs/ufs/ufs_vnops.c
The vnode is not opened, so it ends up with the malloced buffers otherwise.
Reported and tested by: pho
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
the check-hash fails. Prior to the fix in -r342133 the inode with the
zeroed out check-hash was written back to disk causing further confusion.
Reported by: Gary Jennejohn (gj)
Sponsored by: Netflix
before copying in the inode so that the mode and link-count are not set
if the check-hash fails. This change ensures that the vnode will be properly
unwound and recycled rather than being held in the cache.
Initialize the file mode is zero so that if the loading of the inode
fails (for example because of a check-hash failure), the vnode will be
properly unwound and recycled.
Reported by: Gary Jennejohn (gj)
Sponsored by: Netflix
"panic: softdep_update_inodeblock: bad link count" when releasing
a partially initialized vnode after an inode check-hash failure.
Reported by: Gary Jennejohn <gljennjohn@gmail.com>
Reported by: Peter Holm (pho)
Sponsored by: Netflix
check hash to the filesystem inodes. Access attempts to files
associated with an inode with an invalid check hash will fail with
EINVAL (Invalid argument). Access is reestablished after an fsck
is run to find and validate the inodes with invalid check-hashes.
This check avoids a class of filesystem panics related to corrupted
inodes. The hash is done using crc32c.
Note this check-hash is for the inode itself and not any of its
indirect blocks. Check-hash validation may be extended to also
cover indirect block pointers, but that will be a separate (and
more costly) feature.
Check hashes are added only to UFS2 and not to UFS1 as UFS1 is
primarily used in embedded systems with small memories and low-powered
processors which need as light-weight a filesystem as possible.
Reviewed by: kib
Tested by: Peter Holm
Sponsored by: Netflix
deletion is active, specifically after a call to ffs_blkrelease_start()
but before the call to ffs_blkrelease_finish(), ffs_blkrelease_start()
will have handed out SINGLETON_KEY rather than starting a collection
sequence. Thus if we get a SINGLETON_KEY passed to ffs_blkrelease_finish(),
we just return rather than trying to finish the nonexistent sequence.
Reported by: Warner Losh (imp@)
Sponsored by: Netflix
superblock has a check-hash error, an error message noting the
superblock check-hash failure is printed and the mount fails. The
administrator then runs fsck to repair the filesystem and when
successful, the filesystem can once again be mounted.
This approach fails if the filesystem in question is a root filesystem
from which you are trying to boot. Here, the loader fails when trying
to access the filesystem to get the kernel to boot. So it is necessary
to allow the loader to ignore the superblock check-hash error and make
a best effort to read the kernel. The filesystem may be suffiently
corrupted that the read attempt fails, but there is no harm in trying
since the loader makes no attempt to write to the filesystem.
Once the kernel is loaded and starts to run, it attempts to mount its
root filesystem. Once again, failure means that it breaks to its prompt
to ask where to get its root filesystem. Unless you have an alternate
root filesystem, you are stuck.
Since the root filesystem is initially mounted read-only, it is
safe to make an attempt to mount the root filesystem with the failed
superblock check-hash. Thus, when asked to mount a root filesystem
with a failed superblock check-hash, the kernel prints a warning
message that the root filesystem superblock check-hash needs repair,
but notes that it is ignoring the error and proceeding. It does
mark the filesystem as needing an fsck which prevents it from being
enabled for writing until fsck has been run on it. The net effect
is that the reboot fails to single user, but at least at that point
the administrator has the tools at hand to fix the problem.
Reported by: Rick Macklem (rmacklem@)
Discussed with: Warner Losh (imp@)
Sponsored by: Netflix
predates metadata check hashes so that it is done before deciding
whether to compute a check-hash of the superblock.
Reported by: Rick Macklem <rmacklem@uoguelph.ca>
Sponsored by: Netflix
This corrects a bug that prevented snapshots from being mounted due to a
superblock check-hash failure.
Reported by: Brennan Vincent <brennan@umanwizard.com>
Tested by: Peter Holm (pho@)
Sponsored by: Netflix
Directory entries must be padded to maintain alignment; in many
filesystems the padding was not initialized, resulting in stack
memory being copied out to userspace. With the ino64 work there
are also some explicit pad fields in struct dirent. Add a subroutine
to clear these bytes and use it in the in-tree filesystems. The
NFS client is omitted for now as it was fixed separately in r340787.
Reported by: Thomas Barabosch, Fraunhofer FKIE
Reviewed by: kib
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
The d_off field has been added to the dirent structure recently.
Currently filesystems don't support this feature. Support has been
added and tested for zfs, ufs, ext2fs, fdescfs, msdosfs and unionfs.
A stub implementation is available for cd9660, nandfs, udf and
pseudofs but hasn't been tested.
Motivation for this feature: our usecase is for a userspace nfs server
(nfs-ganesha) with zfs. At the moment we cache direntry offsets by
calling lseek once per entry, with this patch we can get the offset
directly from getdirentries(2) calls which provides a significant
speedup.
Submitted by: Jack Halford <jack@gandi.net>
Reviewed by: mckusick, pfg, rmacklem (previous versions)
Sponsored by: Gandi.net
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D17917
document the libufs interface for fetching and storing inodes.
The undocumented getino / putino interface has been replaced
with a new getinode / putinode interface.
Convert the utilities that had been using the undocumented
interface to use the new documented interface.
No functional change (as for now the libufs library does not
do inode check-hashes).
Reviewed by: kib
Tested by: Peter Holm
Sponsored by: Netflix
This will enable callers to take const paths as part of syscall
decleration improvements.
Where doing so is easy and non-distruptive carry the const through
implementations. In UFS the value is passed to an interface that must
take non-const values. In ZFS, const poisoning would touch code shared
with upstream and it's not worth adding diffs.
Bump __FreeBSD_version for external API consumers.
Reviewed by: kib (prior version)
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17805
Flags prevent open(2) and *at(2) vfs syscalls name lookup from
escaping the starting directory. Supposedly the interface is similar
to the same proposed Linux flags.
Reviewed by: jilles (code, previous version of manpages), 0mp (manpages)
Discussed with: allanjude, emaste, jonathan
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D17547
check hash to the superblock. If a check hash fails when an attempt
is made to mount a filesystem, the mount fails with EINVAL (Invalid
argument). This avoids a class of filesystem panics related to
corrupted superblocks. The hash is done using crc32c.
Check hases are added only to UFS2 and not to UFS1 as UFS1 is primarily
used in embedded systems with small memories and low-powered processors
which need as light-weight a filesystem as possible.
Reviewed by: kib
Tested by: Peter Holm
Sponsored by: Netflix
UFS quotaoff iterates over all mp vnodes, and derefences and clears
the pointers to corresponding dquots. If SU work items transiently
reference some of dquots,quotaoff() would eventually fail, but all
processed vnodes are already stripped from dquots. The state is
problematic, since quotas are left enabled, but there is no dquots
where blocks and inodes can be accounted. The result is assertion
failures and NULL pointer dereferences.
Fix it by suspending writes around quotaoff() call. Since the
filesystem is synced, no dandling references to dquots from SU
workitems can left behind, which means that quotaoff succeeds.
The complication there is that quotaoff VFS op is performed with the
mount point busied, while to suspend, we need to start write on the
mp. If vn_start_write() is called on busied mp, system might deadlock
against parallel unmount request. Handle this by unbusy-ing mp before
starting write, which in turn requires changing the quotaoff()
interface to return with the mount point not busied, same as was done
for quotaon().
Reviewed by: mckusick
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
Approved by: re (gjb)
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D17208
Doing so can deadlock when the thread already owns another vnode lock,
e.g. during a rename, as was demonstrated by the reporter. In fact,
there seems to be no need to force the call to getinoquota() always,
because vn_open() locks vnode exclusively, and this is the most
important case. To add to the point, directories where the dirent is
added or removed, are locked exclusively as well.
Reported by: bwidawsk
Tested by: bwidawsk, pho (as part of the larger patch)
Sponsored by: The FreeBSD Foundation
Approved by: re (gjb)
MFC after: 1 week
found that performance was no worse and usually better when running
with TRIM consolidation. Performance improvement was most noticable
when multiple large files are released in a short period of time.
Thus, TRIM consolidation is being enabled by default. Should
operational problems be found, it can be disabled using the command
`sysctl vfs.ffs.dotrimcons=0'. This variable can also be set as a
tunable if early disabling is necessary.
Approved by: re (gjb)
Sponsored by: Netflix
given in random(4).
This includes updating of the relevant man pages, and no-longer-used
harvesting parameters.
Ensure that the pseudo-unit-test still does something useful, now also
with the "other" algorithm instead of Yarrow.
PR: 230870
Reviewed by: cem
Approved by: so(delphij,gtetlow)
Approved by: re(marius)
Differential Revision: https://reviews.freebsd.org/D16898
blocks of a file as contiguously as possible. Since the filesystem
does not know how large a file will grow when it is first being
written, it initially places the file in a set of blocks in which
it currently fits. As it grows, it is relocated to areas with
larger contiguous blocks. In this way it saves its large contiguous
sets of blocks for the files that need them and thus avoids
unnecessaily fragmenting its disk space.
We used to skip reallocating the blocks of a file into a contiguous
sequence if the underlying flash device requested BIO_DELETE
notifications, because devices that benefit from BIO_DELETE also
benefit from not moving the data. However, in the algorithm described
above that reallocates the blocks, the destination for the data is
usually moved before the data is written to the initially allocated
location. So we rarely suffer the penalty of extra writes. With
the addition of the consolodation of contiguous blocks into single
BIO_DELETE operations, having fewer but larger contiguous blocks
reduces the number of (slow and expensive) BIO_DELETE operations.
So when doing BIO_DELETE consolodation, we do block reallocation.
Reviewed by: kib
Tested by: Peter Holm
Sponsored by: Netflix
When deleting files on filesystems that are stored on flash-memory
(solid-state) disk drives, the filesystem notifies the underlying
disk of the blocks that it is no longer using. The notification
allows the drive to avoid saving these blocks when it needs to
flash (zero out) one of its flash pages. These notifications of
no-longer-being-used blocks are referred to as TRIM notifications.
In FreeBSD these TRIM notifications are sent from the filesystem
to the drive using the BIO_DELETE command.
Until now, the filesystem would send a separate message to the drive
for each block of the file that was deleted. Each Gigabyte of file
size resulted in over 3000 TRIM messages being sent to the drive.
This burst of messages can overwhelm the drive's task queue causing
multiple second delays for read and write requests.
This implementation collects runs of contiguous blocks in the file
and then consolodates them into a single BIO_DELETE command to the
drive. The BIO_DELETE command describes the run of blocks as a
single large block being deleted. Each Gigabyte of file size can
result in as few as two BIO_DELETE commands and is typically less
than ten. Though these larger BIO_DELETE commands take longer to
run, they do not clog the drive task queue, so read and write
commands can intersperse effectively with them.
Though this new feature has been throughly reviewed and tested, it
is being added disabled by default so as to minimize the possibility
of disrupting the upcoming 12.0 release. It can be enabled by running
``sysctl vfs.ffs.dotrimcons=1''. Users are encouraged to test it.
If no problems arise, we will consider requesting that it be enabled
by default for 12.0.
Reviewed by: kib
Tested by: Peter Holm
Sponsored by: Netflix
driven by problems found with the algorithms being tested for TRIM
consolodation.
Reported by: Peter Holm
Suggested by: kib
Reviewed by: kib
Sponsored by: Netflix
jails since FreeBSD 7.
Along with the system call, put the various security.jail.allow_foo and
security.jail.foo_allowed sysctls partly under COMPAT_FREEBSD11 (or
BURN_BRIDGES). These sysctls had two disparate uses: on the system side,
they were global permissions for jails created via jail(2) which lacked
fine-grained permission controls; inside a jail, they're read-only
descriptions of what the current jail is allowed to do. The first use
is obsolete along with jail(2), but keep them for the second-read-only use.
Differential Revision: D14791
a smaller number of larger TRIM requests. The hope had been to have
the full TRIM consolodation in place for 12.0, but the algorithms
are still under development and need further testing. With this
framework in place it will be possible to easily add TRIM consolodation
once the optimal strategy has been found.
The only functional change with this patch is the elimination of TRIM
requests for blocks that are freed before they have been likely to
have been written.
Reviewed by: kib
Discussed with: Warner Losh and Chuck Silvers
Sponsored by: Netflix
(incorrectly) called while another suspension is already active.
PR: 230220
Reported by: dexuan
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The timespecadd(3) family of macros were imported from NetBSD back in
r35029. However, they were initially guarded by #ifdef _KERNEL. In the
meantime, we have grown at least 28 syscalls that use timespecs in some
way, leading many programs both inside and outside of the base system to
redefine those macros. It's better just to make the definitions public.
Our kernel currently defines two-argument versions of timespecadd and
timespecsub. NetBSD, OpenBSD, and FreeDesktop.org's libbsd, however, define
three-argument versions. Solaris also defines a three-argument version, but
only in its kernel. This revision changes our definition to match the
common three-argument version.
Bump _FreeBSD_version due to the breaking KPI change.
Discussed with: cem, jilles, ian, bde
Differential Revision: https://reviews.freebsd.org/D14725
It can occur during ordinary use of softupdates, or perhaps if writes to the
underlying media fail (causing bufs to be redirtied). Either way, it is not
particularly actionable.
Reviewed by: imp, kib
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D16258
Avoid Undefined Behavior in ffs_clusteracct()
Change the type of 'bit' variable from int to unsigned int and use unsigned
values consistently.
sys/ufs/ffs/ffs_subr.c:336:10, shift exponent -1 is negative
Detected with Kernel Undefined Behavior Sanitizer.
Reported by <Harry Pantazis>
Submitted by: Pedro Giffuni
Convert integer structure flags to use um_flags:
int um_candelete; /* devvp supports TRIM */
int um_writesuspended; /* suspension in progress */
become:
#define UM_CANDELETE 0x00000001 /* devvp supports TRIM */
#define UM_WRITESUSPENDED 0x00000002 /* suspension in progress */
This is in preparation for adding other flags to indicate forcible
unmount in progress after a disk failure and possibly forcible
downgrade to read-only.
No functional change intended.
Sponsored by: Netflix
The reference counting that's done in the geom_vfs layer to prevent
delivery of requests to defunct devices only works if all requests go
through that layer. UFS was bypassing that layer for BIO_DELETE requests,
sending them to the geom_consumer directly with g_io_request. Allocate
a buf, fill it in, and call strategy on it instead.
Submitted by: Chuck Silvers
Reviewed by: scottl, imp, kirk
Sponsored by: Netflix
Differential: https://reviews.freebsd.org/D15456
- Create getblkx(9) variant of getblk(9) which can return error.
- Add GB_NOSPARSE flag for getblk()/getblkx() which requests that BMAP
was performed before the buffer is created, and EJUSTRETURN returned
in case the requested block does not exist.
- Make ffs_read() use GB_NOSPARSE to avoid instantiating buffer (and
allocating the pages for it), copying from zero_region instead.
The end result is less page allocations and buffer recycling when a
hole is read, which is important for some benchmarks.
Requested and reviewed by: jeff
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D14917
Followup to r313780. Also prefix ext2's and nandfs's versions with
EXT2_ and NANDFS_.
Reported by: kib
Reviewed by: kib, mckusick
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D9623
to fix the memory leak that I introduced in r328426. Instead of
trying to clear up the possible memory leak in all the clients, I
ensure that it gets cleaned up in the source (e.g., ffs_sbget ensures
that memory is always freed if it returns an error).
The original change in r328426 was a bit sparse in its description.
So I am expanding on its description here (thanks cem@ and rgrimes@
for your encouragement for my longer commit messages).
In preparation for adding check hashing to superblocks, r328426 is
a refactoring of the code to get the reading/writing of the superblock
into one place. Unlike the cylinder group reading/writing which
ends up in two places (ffs_getcg/ffs_geom_strategy in the kernel
and cgget/cgput in libufs), I have the core superblock functions
just in the kernel (ffs_sbfetch/ffs_sbput in ffs_subr.c which is
already imported into utilities like fsck_ffs as well as libufs to
implement sbget/sbput). The ffs_sbfetch and ffs_sbput functions
take a function pointer to do the actual I/O for which there are
four variants:
ffs_use_bread / ffs_use_bwrite for the in-kernel filesystem
g_use_g_read_data / g_use_g_write_data for kernel geom clients
ufs_use_sa_read for the standalone code (stand/libsa/ufs.c
but not stand/libsa/ufsread.c which is size constrained)
use_pread / use_pwrite for libufs
Uses of these interfaces are in the UFS filesystem, geoms journal &
label, libsa changes, and libufs. They also permeate out into the
filesystem utilities fsck_ffs, newfs, growfs, clri, dump, quotacheck,
fsirand, fstyp, and quot. Some of these utilities should probably be
converted to directly use libufs (like dumpfs was for example), but
there does not seem to be much win in doing so.
Tested by: Peter Holm (pho@)
Coverity cannot determine that handle_written_indirdep() does not access
uninitialized 'sbp' when flags argument is zero.
So, simply move the initialization slightly sooner to silence the warning.
No functional change.
Reported by: Coverity
Sponsored by: Dell EMC Isilon
ffs_sbget() may return a superblock buffer even if it fails, so the
caller must be prepared to free it in this case. Moreover, when tasting
alternate superblock locations in a loop, ffs_sbget()'s readfunc
callback must free the previously allocated buffer.
Reported and tested by: pho
Reviewed by: kib (previous version)
Differential Revision: https://reviews.freebsd.org/D14390
folks running filesystems created on check-hash enabled kernels
(which I will call "new") on a non-check-hash enabled kernels (which
I will call "old). The idea here is to detect when a filesystem is
run on an old kernel and flag the filesystem so that when it gets
moved back to a new kernel, it will not start getting a slew of
check-hash errors.
Back when the UFS version 2 filesystem was created, it added a file
flag FS_INDEXDIRS that was to be set on any filesystem that kept
some sort of on-disk indexing for directories. The idea was precisely
to solve the issue we have today. Specifically that a newer kernel
that supported indexing would be able to tell that the filesystem
had been run on an older non-indexing kernel and that the indexes
should not be used until they had been rebuilt. Since we have never
implemented on-disk directory indicies, the FS_INDEXDIRS flag is
cleared every time any UFS version 2 filesystem ever created is
mounted for writing.
This commit repurposes the FS_INDEXDIRS flag as the FS_METACKHASH
flag. Thus, the FS_METACKHASH is definitively known to have always
been cleared. The FS_INDEXDIRS flag has been moved to a new block
of flags that will always be cleared starting with this commit
(until they get used to implement some future feature which needs
to detect that the filesystem was mounted on a kernel that predates
the new feature).
If a filesystem with check-hashes enabled is mounted on an old
kernel the FS_METACKHASH flag is cleared. When that filesystem is
mounted on a new kernel it will see that the FS_METACKHASH has been
cleared and clears all of the fs_metackhash flags. To get them
re-enabled the user must run fsck (in interactive mode without the
-y flag) which will ask for each supported check hash whether it
should be rebuilt and enabled. When fsck is run in its default preen
mode, it will just ignore the check hashes so they will remain
disabled.
The kernel has always disabled any check hash functions that it
does not support, so as more types of check hashes are added, we
will get a non-surprising result. Specifically if filesystems get
moved to kernels supporting fewer of the check hashes, those that
are not supported will be disabled. If the filesystem is moved back
to a kernel with more of the check-hashes available and fsck is run
interactively to rebuild them, then their checking will resume.
Otherwise just the smaller subset will be checked.
A side effect of this commit is that filesystems running with
cylinder-group check hashes will stop having them checked until
fsck is run to re-enable them (since none of them currently have
the FS_METACKHASH flag set). So, if you want check hashes enabled
on your filesystems after booting a kernel with these changes, you
need to run fsck to enable them. Any newly created filesystems will
have check hashes enabled. If in doubt as to whether you have check
hashes emabled, run dumpfs and look at the list of enabled flags
at the end of the superblock details.
ncookies cannot be negative or the allocator will fail. This should only
happen if a caller is very broken but we can still try to survive the
event.
We should probably also verify for uio_resid > MAXPHYS but in that case
it is not clear that just clipping the ncookies value is an adequate
response.
MFC after: 2 weeks
systems running with a heavy filesystem load. Tracking down this
bug was elusive because there were actually two problems. Sometimes
the in-memory check hash was wrong and sometimes the check hash
computed when doing the read was wrong. The occurrence of either
error caused a check-hash mismatch to be reported.
The first error was that the check hash in the in-memory cylinder
group was incorrect. This error was caused by the following
sequence of events:
- We read a cylinder-group buffer and the check hash is valid.
- We update its cg_time and cg_old_time which makes the in-memory
check-hash value invalid but we do not mark the cylinder group dirty.
- We do not make any other changes to the cylinder group, so we
never mark it dirty, thus do not write it out, and hence never
update the incorrect check hash for the in-memory buffer.
- Later, the buffer gets freed, but the page with the old incorrect
check hash is still in the VM cache.
- Later, we read the cylinder group again, and the first page with
the old check hash is still in the VM cache, but some other pages
are not, so we have to do a read.
- The read does not actually get the first page from disk, but rather
from the VM cache, resulting in the old check hash in the buffer.
- The value computed after doing the read does not match causing the
error to be printed.
The fix for this problem is to only set cg_time and cg_old_time as
the cylinder group is being written to disk. This keeps the in-memory
check-hash valid unless the cylinder group has had other modifications
which will require it to be written with a new check hash calculated.
It also requires that the check hash be recalculated in the in-memory
cylinder group when it is marked clean after doing a background write.
The second problem was that the check hash computed at the end of the
read was incorrect because the calculation of the check hash on
completion of the read was being done too soon.
- When a read completes we had the following sequence:
- bufdone()
-- b_ckhashcalc (calculates check hash)
-- bufdone_finish()
--- vfs_vmio_iodone() (replaces bogus pages with the cached ones)
- When we are reading a buffer where one or more pages are already
in memory (but not all pages, or we wouldn't be doing the read),
the I/O is done with bogus_page mapped in for the pages that exist
in the VM cache. This mapping is done to avoid corrupting the
cached pages if there is any I/O overrun. The vfs_vmio_iodone()
function is responsible for replacing the bogus_page(s) with the
cached ones. But we were calculating the check hash before the
bogus_page(s) were replaced. Hence, when we were calculating the
check hash, we were partly reading from bogus_page, which means
we calculated a bad check hash (e.g., because multiple pages have
been mapped to bogus_page, so its contents are indeterminate).
The second fix is to move the check-hash calculation from bufdone()
to bufdone_finish() after the call to vfs_vmio_iodone() so that it
computes the check hash over the correct set of pages.
With these two changes, the occasional cylinder-group check-hash
errors are gone.
Submitted by: David Pfitzner <dpfitzner@netflix.com>
Reviewed by: kib
Tested by: David Pfitzner
Sanitize the values that will be assigned to ncookies so that we ensure
they are sane and we can handle them.
Let ncookies signed as it was before r328346. The valid range is such
that unsigned values are not required and we are not able to avoid at
least one cast anyways.
Hinted by: bde
Specifically reading is done if ffs_sbget() and writing is done
in ffs_sbput(). These functions are exported to libufs via the
sbget() and sbput() functions which then used in the various
filesystem utilities. This work is in preparation for adding
subperblock check hashes.
No functional change intended.
Reviewed by: kib
When allocating memory through malloc(9), we always expect the amount of
memory requested to be unsigned as a negative value would either stand for
an error or an overflow.
Unsign some values, found when considering the use of mallocarray(9), to
avoid unnecessary casting. Also consider that indexes should be of
at least the same size/type as the upper limit they pretend to index.
MFC after: 2 weeks
Basic use of mallocarray to prevent overflows: static analyzers are also
likely to perform additional checks.
Since mallocarray expects unsigned parameters, unsign some
related variables to minimize sign conversions.
Reviewed by: mckusick
Basic use of mallocarray to prevent overflows. Here allocation is done
with M_NOWAIT so the code is prepared for the possibility of returning
NULL values. Since mallocarray expects unsigned parameters, unsign some
related variables to minimize sign conversions.
Reviewed by: mckusick
The code accesses bp->b_dep without owning the ufs mount softdep lock,
which makes it possible for the derefenced workitem to be freed in
parallel. In particular, the deallocate_dependencies(),
softdep_disk_io_initiation() and softdep_disk_write_complete() are
affected.
Move the code to safely calculate ump from the buffer with
dependencies into the helper softdep_bp_to_mp() and use it for all
found cases.
Tested by: pho (as part of the bigger patch)
Reviewed by: mckusick (as part of the bigger patch)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
handle_written_XXX() in case of processing the buffer with an error.
Tested by: pho (as part of the bigger patch)
Reviewed by: mckusick (as part of the bigger patch)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
so that buf_complete() sees fully constructed buffer.
This is a NOP right now, but will be needed by the forthcoming SU change.
Reported and tested by: pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This reduces noise when kernel is compiled by newer GCC versions,
such as one used by external toolchain ports.
Reviewed by: kib, andrew(sys/arm and sys/arm64), emaste(partial), erj(partial)
Reviewed by: jhb (sys/dev/pci/* sys/kern/vfs_aio.c and sys/kern/kern_synch.c)
Differential Revision: https://reviews.freebsd.org/D10385
On the one hand, FIFOs should respect other variables not supported by
the fifofs vnode operation (such as _PC_NAME_MAX, _PC_LINK_MAX, etc.).
These values are fs-specific and must come from a fs-specific method.
On the other hand, filesystems that support FIFOs are required to
support _PC_PIPE_BUF on directory vnodes that can contain FIFOs.
Given this latter requirement, once the fs-specific VOP_PATHCONF
method supports _PC_PIPE_BUF for directories, it is also suitable for
FIFOs permitting a single VOP_PATHCONF method to be used for both
FIFOs and non-FIFOs.
To that end, retire all of the FIFO-specific pathconf methods from
filesystems and change FIFO-specific vnode operation switches to use
the existing fs-specific VOP_PATHCONF method. For fifofs, set it's
VOP_PATHCONF to VOP_PANIC since it should no longer be used.
While here, move _PC_PIPE_BUF handling out of vop_stdpathconf() so that
only filesystems supporting FIFOs will report a value. In addition,
only report a valid _PC_PIPE_BUF for directories and FIFOs.
Discussed with: bde
Reviewed by: kib (part of a larger patch)
MFC after: 1 month
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D12572
Having all filesystems fall through to default values isn't always correct
and these values can vary for different filesystem implementations. Most
of these changes just use the existing default values with a few exceptions:
- Don't report CHOWN_RESTRICTED for ZFS since it doesn't do the exact
permissions check this claims for chown().
- Use NANDFS_NAME_LEN for NAME_MAX for nandfs.
- Don't report a LINK_MAX of 0 on smbfs. Now fail with EINVAL to
indicate hard links aren't supported.
Requested by: bde (though perhaps not this exact implementation)
Reviewed by: kib (earlier version)
MFC after: 1 month
Sponsored by: Chelsio Communications
FFS performs asynchronous inode initialization, using a barrier write
to ensure that the inode block is written before the corresponding
cylinder group header update. Some GEOMs do not appear to handle
BIO_ORDERED correctly, meaning that the barrier write may not work as
intended. The sysctl allows one to work around this problem at the
cost of expensive file creation on new filesystems. The default
behaviour is unchanged.
Reviewed by: kib, mckusick
MFC after: 1 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13428
When more than one thread enters ufsdirhash_create() for the same
directory and the inode dirhash is instantiated, but the dirhash' hash
is not, all of them lock the dirhash shared and then try to upgrade.
Since there are several threads owning the lock shared, upgrade fails
and the same attempt is repeated, ad infinitum.
To break the lockstep, lock the dirhash in exclusive mode after the
failed try-upgrade.
Reported and tested by: pho
Sponsored by: Mellanox Technologies
MFC after: 1 week
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
When QUEUE_MACRO_DEBUG_TRASH is configured, the queue linkage fields
are trashed upon removal of the item, so be sure to only read them before
removing the item.
No functional change intended.
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Normally wakeups() are performed for completed softupdates work items
in workitem_free() before the underlying memory is free()'d.
complete_jseg() was clearing the "wakeup needed" flag in work items to
defer the wakeup until the end of each loop iteration. However, this
resulted in the item being free'd before it's address was used with
wakeup(). As a result, another part of the kernel could allocate this
memory from malloc() and use it as a wait channel for a different
"event" with a different lock. This triggered an assertion failure
when the lock passed to sleepq_add() did not match the existing lock
associated with the sleep queue. Fix this by removing the code to
defer the wakeup in complete_jseg() allowing the wakeup to occur
slightly earlier in workitem_free() before free() is called.
The main reason I can think of for deferring a wakeup() would be to
avoid waking up a waiter while holding a lock that the waiter would
need. However, no locks are dropped in between the wakeup() in
workitem_free() and the end of the loop in complete_jseg() as far as I
can tell.
In general I think it is not safe to do a wakeup() after free() as one
cannot control how other parts of the kernel that might reuse the
address for a different wait channel will handle spurious wakeups.
Reported by: pho
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D12494
check hash to cylinder groups. If a check hash fails when a cylinder
group is read, no further allocations are attempted in that cylinder
group until it has been fixed by fsck. This avoids a class of
filesystem panics related to corrupted cylinder group maps. The
hash is done using crc32c.
Check hases are added only to UFS2 and not to UFS1 as UFS1 is primarily
used in embedded systems with small memories and low-powered processors
which need as light-weight a filesystem as possible.
Specifics of the changes:
sys/sys/buf.h:
Add BX_FSPRIV to reserve a set of eight b_xflags that may be used
by individual filesystems for their own purpose. Their specific
definitions are found in the header files for each filesystem
that uses them. Also add fields to struct buf as noted below.
sys/kern/vfs_bio.c:
It is only necessary to compute a check hash for a cylinder
group when it is actually read from disk. When calling bread,
you do not know whether the buffer was found in the cache or
read. So a new flag (GB_CKHASH) and a pointer to a function to
perform the hash has been added to breadn_flags to say that the
function should be called to calculate a hash if the data has
been read. The check hash is placed in b_ckhash and the B_CKHASH
flag is set to indicate that a read was done and a check hash
calculated. Though a rather elaborate mechanism, it should
also work for check hashing other metadata in the future. A
kernel internal API change was to change breada into a static
fucntion and add flags and a function pointer to a check-hash
function.
sys/ufs/ffs/fs.h:
Add flags for types of check hashes; stored in a new word in the
superblock. Define corresponding BX_ flags for the different types
of check hashes. Add a check hash word in the cylinder group.
sys/ufs/ffs/ffs_alloc.c:
In ffs_getcg do the dance with breadn_flags to get a check hash and
if one is provided, check it.
sys/ufs/ffs/ffs_vfsops.c:
Copy across the BX_FFSTYPES flags in background writes.
Update the check hash when writing out buffers that need them.
sys/ufs/ffs/ffs_snapshot.c:
Recompute check hash when updating snapshot cylinder groups.
sys/libkern/crc32.c:
lib/libufs/Makefile:
lib/libufs/libufs.h:
lib/libufs/cgroup.c:
Include libkern/crc32.c in libufs and use it to compute check
hashes when updating cylinder groups.
Four utilities are affected:
sbin/newfs/mkfs.c:
Add the check hashes when building the cylinder groups.
sbin/fsck_ffs/fsck.h:
sbin/fsck_ffs/fsutil.c:
Verify and update check hashes when checking and writing cylinder groups.
sbin/fsck_ffs/pass5.c:
Offer to add check hashes to existing filesystems.
Precompute check hashes when rebuilding cylinder group
(although this will be done when it is written in fsutil.c
it is necessary to do it early before comparing with the old
cylinder group)
sbin/dumpfs/dumpfs.c
Print out the new check hash flag(s)
sbin/fsdb/Makefile:
Needs to add libufs now used by pass5.c imported from fsck_ffs.
Reviewed by: kib
Tested by: Peter Holm (pho)
ino64 expanded nlink_t to 64 bits, but the on-disk format for UFS is still
limited to 16 bits. This is a nop currently but will matter if LINK_MAX is
increased in the future.
Reviewed by: kib
Sponsored by: Chelsio Communications
superblocks created in revision 322297 only works on disks
with sector sizes up to 4K. This update allows the recovery
information to be created by newfs and used by fsck on disks
with sector sizes up to 64K. Note that FFS currently limits
filesystem to be mounted from disks with up to 8K sectors.
Expanding this limitation will be the subject of another
commit.
Reported by: Peter Holm
Reviewed with: kib
vnode lock.
Caller of softdep_count_dependencies() may own a buffer lock, which
might conflict with the lock order.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 10 days
softdep_count_dependencies().
Buffer's b_dep list is protected by the SU mount lock. Owning the
buffer lock is not enough to guarantee the stability of the list.
Calculation of the UFS mount owning the workitems from the buffer must
be much more careful to not dereference the work item which might be
freed meantime. To get to ump, use the pointers chain which does not
involve workitems at all.
Reported and tested by: pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
unable to automatically find alternate superblocks. This checkin
places the information needed to find alternate superblocks to the
end of the area reserved for the boot block.
Filesystems created with a newfs of this vintage or later will
create the recovery information. If you have a filesystem created
prior to this change and wish to have a recovery block created for
your filesystem, you can do so by running fsck in forground mode
(i.e., do not use the -p or -y options). As it starts, fsck will
ask ``SAVE DATA TO FIND ALTERNATE SUPERBLOCKS'' to which you should
answer yes.
Discussed with: kib, imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D11589
Update the use of the B_CACHE flag (since the May 1999 commit
that made it the correct test here).
Reported by: Andreas Longwitz <longwitz@incore.de>
Reviewed by: kib
Tested by: Peter Holm
MFC after: 1 week
For freshly allocated snapdata, Lock sn_lock in advance, so
si_snapdata readers see the locked snapdata and not race.
For existing snapdata, if the thread was put to sleep waiting for
sn_lock, re-read si_snapdata. This either closes the race or makes
the reliance on LK_DRAIN less important.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
It is possible for ffs_snapblkfree() to race and lock snaplock while
the devvp snapdata is instantiated, but no snapshots exist. In this
case the loop over snapshots in ffs_snapblkfree() is not executed, and
the local variable vp is left initialized to NULL.
Unlock using &sn->sn_lock and not vp->v_vnlock. For the inodes on the
snapshot list, the locks are same.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
in ffs_snapremove().
Apparently ffs_snapremove() may be called with the snap lock recursed,
at least one trace demonstrated this when snapshot vnode was unlinked
while synced. It was inactivated from the syncer thread.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Update filesystems not currently using vop_stdpathconf() in pathconf
VOPs to use vop_stdpathconf() for any configuration variables that do
not have filesystem-specific values. vop_stdpathconf() is used for
variables that have system-wide settings as well as providing default
values for some values based on system limits. Filesystems can still
explicitly override individual settings.
PR: 219851
Reported by: cem
Reviewed by: cem, kib, ngie
MFC after: 1 month
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D11541
group. Change all code points that open-coded this functionality
to use the new function. This commit is a refactoring with no
change in functionality.
In the future this change allows more robust checking of cylinder
group reads along the lines discussed in the hardening UFS session
at BSDCan (retry I/O, add checksums, etc). For more detail see the
session notes at https://wiki.freebsd.org/DevSummit/201706/HardeningUFS
Reviewed by: kib
host.
Problems start appearing when there are several threads all doing
operations on a UFS volume and the SU workqueue needs a cleanup. It is
possible that each thread calling softdep_request_cleanup() owns the
lock for some dirty vnode (e.g. all of them are executing mkdir(2),
mknod(2), creat(2) etc) and all vnodes which must be flushed are locked
by corresponding thread. Then, we get all the threads simultaneously
entering softdep_request_cleanup().
There are two problems:
- Several threads execute MNT_VNODE_FOREACH_ALL() loops in parallel. Due
to the locking, they quickly start executing 'in phase' with the speed
of the slowest thread.
- Since each thread already owns the lock for a dirty vnode, other threads
non-blocking attempt to lock the vnode owned by other thread fail,
and loops executing without making the progress.
Retry logic does not allow the situation to recover. The result is
a livelock.
Fix these problems by making the following changes:
- Allow only one thread to enter MNT_VNODE_FOREACH_ALL() loop per mp.
A new flag FLUSH_RC_ACTIVE guards the loop.
- If there were failed locking attempts during the loop, abort retry
even if there are still work items on the mp work list. An
assumption is that the items will be cleaned when other thread
either fsyncs its vnode, or unlock and allow yet another thread to
make the progress.
It is possible now that some calls would get undeserved ENOSPC from
ffs_alloc(), because the cleanup is not aggressive enough. But I do
not see how can we reliably clean up workitems if calling
softdep_request_cleanup() while still owning the vnode lock. I thought
about scheme where ffs_alloc() returns ERESTART and saves the retry
counter somewhere in struct thread, to return to the top level, unlock
the vnode and retry. But IMO the very rare (and unproven) spurious
ENOSPC is not worth the complications.
Reported and tested by: pho
Style and comments by: mckusick
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
the last step of ffs_unmount().
It is possible that the mount point is recorded for cleanup in AST
context while softdep flush is executed during unmount. The workitems
are flushed by other means for the unmount, but the stray reference to
struct mount blocks destruction of mount. Check for the situation and
manually call vfs_rel() before returning from ffs_unmount().
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
makefs(1) has a number of signedness warnings (when built with higher
WARNS), most of which can be addressed by careful application of casts
in makefs itself.
There is one case where a signedness warning arises from the blksize
macro, so must be addressed in the macro itself.
Reviewed by: kib, mckusick
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D10589
Rather than the global NAME_MAX constant. This change is required to
support systems with a NAME_MAX/MAXNAMLEN that differs from UFS_MAXNAMLEN.
This was missed in r313475 due to the alternative spelling ("NAME_MAX") of
MAXNAMLEN. This change is also similar in spirit to r313780.
Reported by: ngie@
Sponsored by: Dell EMC Isilon
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
Thread might create a condition for delayed SU cleanup, which creates
a reference to the mount point in td_su, but exit without returning
through userret(), e.g. when terminating due to single-threading or
process exit. In this case, td_su reference is not dropped and mount
point cannot be freed.
Handle the situation by clearing td_su also in the thread destructor
and in exit1(). softdep_ast_cleanup() has to receive the thread as
argument, since e.g. thread destructor is executed in different
context.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
As suggested in r167010, use the structure type and macros to access and
modify UFS2 extended attributes. Add assertions that pointers are
aligned in places where we now access the data through a structure
pointer, instead of character-by-character.
PR: 216127
Reported by: dewayne at heuristicsystems.com.au
Reviewed by: kib@
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D9225
The ea_name string is not nul-terminated. Correct the documentation.
Because the subsequent field is padded to 8 bytes, and the padding is
zeroed, the ea_name string will appear to be nul-terminated whenever the
length isn't exactly one (mod eight).
This was introduced in r167010 (2007).
Additionally, mark the length fields as unsigned. This particularly
matters for the single byte ea_namelength field, which can represent
extended attribute names up to 255 bytes long.
No functional change.
PR: 216127
Reported by: dewayne at heuristicsystems.com.au
Reviewed by: kib@
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D9206
The swap pager enqueues laundered pages near the head of the inactive queue
to avoid another trip through LRU before reclamation. This change adds
support for this behaviour to the vnode pager and makes use of it in UFS and
ext2fs. Some ioflag handling is consolidated into a common subroutine so
that this support can be easily extended to other filesystems which make use
of the buffer cache. No changes are needed for ZFS since its putpages
routine always undirties the pages before returning, and the laundry
thread requeues the pages appropriately in this case.
Reviewed by: alc, kib
Differential Revision: https://reviews.freebsd.org/D8589
Currently mount update keeps vfs_busy(9) reference on the mount point
during MNT_UPDATE VFS_MOUNT() vfsops call. This already provides the
exclusion, but is problematic for filesystems which need to perform
namei(9) during VFS_MOUNT(MNT_UPDATE) operations, e.g. to refresh
mnt_from path, because namei(9) must not be called while the
vfs_busy(9) reference is owned.
Check for MNT_UPDATE flag before setting MNTK_UNMOUNT, and for
MNTK_UNMOUNT before entering innards of vfs_domount_update(), failing
syscalls with EBUSY if conflict is detected. Keep vfs_busy(9)
reference around VFS_MOUNT(MNT_UPDATE) calls still to not change VFS
KPI.
In the update path in ffs_mount(), drop vfs_busy() reference around
namei(), which is now safe due to unmount never executing in parallel
with VFS_MOUNT(MNT_UPDATE), and which avoids the deadlock.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
data structure sizes when mounting and reloading UFS/FFS
filesystems by using a u_long rather than an int for the size.
Reported by: Mariusz Zaborski <oshogbo@>
MFC after: 1 week
which also use buffer cache.
Most important addition to the code is the handling of filesystems
where the block size is less than the machine page size, which might
require reading several buffers to validate single page.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
directory create and delete operations. If it ever finds a directory
with a link count less than 2, it panics. Thus, an rm -rf that
encounters a directory with a link count below 2 causes a kernel
panic. The proposed fix is to return the error EINVAL rather than
panicing. The effect is that the requested operation is not done,
but the system continues to run. At a more convenient later time,
the filesystem can be unmounted and cleaned (with fsck or journal
run). Once cleaned, the operation can be rerun to successful
completion.
This fix takes that approach. The panic message has been converted
into a uprintf(9) to provide the user with the inode number and
filesystem mount point of the offending directory and EINVAL is
returned for the operation.
The long (three year) delay in fixing this problem occurred because
the bug was misclassified when originally assigned and only this week
was found during a sweep of old unresolved bug reports.
PR: 180894
Reviewed by: kib
MFC after: 2 weeks
See the comments for more detailed description of the algorithm.
The pager is used unconditionally when the block size of the
underlying device is larger than the machine page size, since local
vnode pager cannot handle the configuration [1]. Otherwise, the
vfs.ffs.use_buf_pager sysctl allows to switch to the local pager.
Measurements demonstrated no regression in the ever-important
buildworld benchmark, and small (~5%) throughput improvements in the
special microbenchmark configuration for dbench over swap-backed
md(4).
Code can be generalized and reused for other filesystems which use
buffer cache.
Reported by: Anton Yuzhaninov <citrin@citrin.ru> [1]
Tested by: pho
Benchmarked by: mjg, pho
Reviewed by: alc, markj, mckusick (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D8198
Reclaimed vnode type is VBAD, so succesful comparision like
devvp->v_type != VREG does not imply that the devvp references
snapshot, it might be due to a reclaimed vnode. Explicitely check the
vnode type.
In the the most important case of ffs_blkfree(), the devfs vnode is
locked and its type is stable. In other cases, if the vnode is
reclaimed right after the check, hopefully the buffer methods return
right error codes.
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
- Use _Bool to not require userspace to include stdbool.h.
- Make extattr.h usable without vnode_if.h.
- Follow i_ump to get cdev pointer.
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Remove redunand i_dev and i_fs pointers, which are available as
ip->i_ump->um_dev and ip->i_ump->um_fs, and reorder members by size to
reduce padding. To compensate added derefences, the most often i_ump
access to differentiate between UFS1 and UFS2 dinode layout is
removed, by addition of the new i_flag IN_UFS2. Overall, this
actually reduces the amount of memory dereferences.
On 64bit machine, original struct inode size is 176, reduced to 152
bytes with the change.
Tested by: pho (previous version)
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
mounts in almost all cases instead of in most cases. Don't override
DOINGASYNC() by any condition except IO_SYNC.
Fix previous sprinking of DOINGASYNC() checks. Don't override IO_SYNC
by DOINGASYNC(). In ffs_write() and ffs_extwrite(), there were
intentional overrides that just broke O_SYNC of data. In
ffs_truncate(), there are 5 calls to ffs_update(), 4 with
apparently-unintentional overrides and 1 without; this had no effect
due to the main async mount hack descibed below.
Fix 1 place in ffs_truncate() where the caller's IO_ASYNC was overridden
for the soft updates case too (to do a delayed write instead of a sync
write). This is supposed to be the only change that affects anything
except async mounts.
In ffs_update(), remove the 19 year old efficiency hack of ignoring
the waitfor flag for async mounts, so that fsync() almost works for
async mounts. All callers are supposed to be fixed to not ask for a
sync update unless they are for fsync() or [I]O_SYNC operations.
fsync() now almost works for async mounts. It used to sync the data
but not the most important metdata (the inode). It still doesn't sync
associated directories.
This gave 10-20% fewer writes for my makeworld benchmark with async
mounted tmp and obj directories from an already small number.
Style fixes:
- in ffs_balloc.c, remove rotted quadruplicated comments about the
simplest part of the DOING*() decisions and rearrange the nearly-
quadruplicated code to be more nearly so.
- in ufs_vnops.c, use a consistent style with less negative logic and
no manual "optimization" of || to | in DOING*() expressions.
Reviewed by: kib (previous version)
truncation failed.
Doing so resulted in inconsistent state of the ufs dirhash with regard
to the actual directory inode state, and could lead to spurious ENOENT
errors for lookups of existing files in production kernels, or
assertion failures in the debugging kernels.
Change the logic of calling ufsdirhash_dirtrunc() to be same as in
ufs_direnter(). Execute UFS_TRUNCATE() first, log error, and only do
dirtrunc() if UFS_TRUNCATE() succeeded.
Note that the problem was exacerbated by the bug in the
flush_newblk_dep() function (see r305599), which caused in the spurios
errors from ffs_sync() and then ffs_truncate().
In collaboration with: pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
The buffer lock is retried on failed LK_SLEEPFAIL attempt, and error
from the failed attempt is irrelevant. But since there is path after
retry which does not clear error, it is possible to return spurious
error from the function.
The issue resulted in a spurious failure of softdep_sync_buf(),
causing further spurious failure of ffs_sync().
In collaboration with: pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
This change is formally not needed, since i_endoff not used in all
code paths after the call to ufs_direnter(), and i_endoff is
recalculated by the next lookup. But having the value correct makes
the reasoning about code simpler.
Reported and tested by: pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
cleared since nothing prevents completion of the parallel quotaoff.
There is nothing to sync in this case, and no reason to panic.
Reported and tested by: pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
operations. Instead of upgrading, assert that the lock is exclusive.
Explain the cause in comments.
This effectively reverts r209367.
Tested by: pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
going to re-read inodes.
Secondary write initiators, e.g. ufs_inactive(), might need to start a
write while owning the vnode lock. Since the suspended state
established by /dev/ufssuspend prevents them from entering
vn_start_secondary_write(), we get deadlock otherwise.
Note that it is arguably not very useful to re-read inodes after
/dev/ufssuspend suspension, because the suspension does not block
readers, and other threads might read existing files in parallel with
suspension owner (for now, only growfs(8)) operations. This
effectively means that suspension owner cannot safely modify existing
inodes, and then there is no sense in re-reading. But keep the code
enabled for now.
Reported and tested by: pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
with softupdates panics the kernel. The problem that has been pointed
out is that when there is a transient write error on certain metadata
blocks, specifically directory blocks (PAGEDEP), inode blocks
(INODEDEP), indirect pointer blocks (INDIRDEPS), and cylinder group
(BMSAFEMAP, but only when journaling is enabled), we get a panic
in one of the routines called by softdep_disk_io_initiation that
the I/O is "already started" when we retry the write.
These dependency types potentially need to do roll-backs when called
by softdep_disk_io_initiation before doing a write and then a
roll-forward when called by softdep_disk_write_complete after the
I/O completes. The panic happens when there is a transient error.
At the top of softdep_disk_write_complete we check to see if the
write had an error and if an error occurred we just return. This
return is correct most of the time because the main role of the routines
called by softdep_disk_write_complete is to process the now-completed
dependencies so that the next I/O steps can happen.
But for the four types listed above, they do not get to do their
rollback operations. This causes the panic when softdep_disk_io_initiation
gets called on the second attempt to do the write and the roll-back
routines find that the roll-backs have already been done. As an
aside I note that there is also the problem that the buffer will
have been unlocked and thus made visible to the filesystem and to
user applications with the roll-backs in place.
The way to resolve the problem is to add a flag to the routines called
by softdep_disk_write_complete for the four dependency types noted
that indicates whether the write was successful (WRITESUCCEEDED).
If the write does not succeed, they do just the roll-backs and then
return. If the write was successful they also do their usual
processing of the now-completed dependencies.
The fix was tested by selectively injecting write errors for buffers
holding dependencies of each of the four types noted above and then
verifying that the kernel no longer paniced and that following the
successful retry of the write that the filesystem could be unmounted
and successfully checked cleanly.
PR: 211013
Reviewed by: kib
allocation unwinding.
Dandling buffers are released on UFS_BALLOC() failure to ensure that
later attempt to allocate blocks in close range do not find the blocks
with invalid content, since possible partial block allocations are
unwound. As such, it is not enough to just release the buffers, the
pages must also invalidated and removed from the vnode vm_object
queue. Otherwise the pages might be found later and used to
reconstruct indirect buffers when doing allocations at offset close to
the failure point, and their stale content compromise the filesystem
integrity.
Note that just marking the buffer as B_INVAL is not enough, B_NOCACHE
is required. To be sure, clear the B_CACHE flag as well. This
complements the r174973, which started releasing buffers.
Reported and tested by: pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
that recorded allocated blocks numbers match the physical block
numbers of dandling buffers which are released.
When finally freeing the blocks during unwind, assert that dandling
buffers where not re-allocated. They shouldn't, because the vnode lock
is owned exclusive.
Reviewed by: mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
have SU enabled, there is no point in calling softdep_request_cleanup().
The call cannot produce free blocks, but we unecessarily lock ufsmount
and do inode block write. Usual point of not doing optimizations for
the corner case of the full volume is not applicable there, the work
is easily avoidable, and the addition CPU and disk io load do not lead
to succeeding retry.
Reviewed by: mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
overflow local arrays. This is not immediately obvious from the
static code inspection, due to retry logic.
Reviewed by: mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
before UFS_BALLOC() is called. I do not believe that this caused any
real issue on FreeBSD because the exclusive vnode lock is held over
the balloc/resize, the change is to make formally correct KPI use.
Based on: the Matthew Dillon' patch from DragonFly BSD
PR: 93942
Reviewed by: mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
