A version of each of the MD files by necessity exists for each CPU
architecture supported by the Linuxolator. Clean these up so that new
architectures do not inherit whitespace issues.
Clean up shared Linuxolator files while here.
Sponsored by: Turing Robotic Industries Inc.
Stop leaking kernel pointers though theses sysctls and make sure that the
padding in the structures is zeroed on allocation to avoid other leaks.
Reviewed by: gordon, kib
Obtained from: CheriBSD
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D13459
1) The OPW() function macro should have the same return type like the
function it executes.
2) The DEVFS I/O-limit should be enforced for all character device reads
and writes.
3) The character device file handle should be passable, same as for
DEVFS based file handles.
Reported by: jbeich @
MFC after: 1 week
Sponsored by: Mellanox Technologies
in the LinuxKPI. This is done by calling finit() just before returning a magic
value of ENXIO in the "linux_dev_fdopen" function.
The Linux file structure should mimic the BSD file structure as much as
possible. This patch decouples the Linux file structure from the belonging
character device right after the "linux_dev_fdopen" function has returned.
This fixes an issue which allows a Linux file handle to exist after a
character device has been destroyed and removed from the directory index
of /dev. Only when the reference count of the BSD file handle reaches zero,
the Linux file handle is destroyed. This fixes use-after-free issues related
to accessing the Linux file structure after the character device has been
destroyed.
While at it add a missing NULL check for non-present file operation.
Calling a NULL pointer will result in a segmentation fault.
Reviewed by: kib @
MFC after: 1 week
Sponsored by: Mellanox Technologies
than virtual
Summary:
Some architectures have physical/bus addresses that are much larger
than virtual addresses. This change just quiets a warning, as DMAP is not used
on those architectures, and on 64-bit platforms uintptr_t is the same size as
vm_paddr_t and void *.
Reviewed By: hselasky
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D14043
in the LinuxKPI. The old implementation assumed only one IDR layer was present.
Take additional IDR layers into account when computing the "id" value.
MFC after: 1 week
Found by: Karthik Palanichamy <karthikp@chelsio.com>
Tested by: Karthik Palanichamy <karthikp@chelsio.com>
Sponsored by: Mellanox Technologies
Uses of mallocarray(9).
The use of mallocarray(9) has rocketed the required swap to build FreeBSD.
This is likely caused by the allocation size attributes which put extra pressure
on the compiler.
Given that most of these checks are superfluous we have to choose better
where to use mallocarray(9). We still have more uses of mallocarray(9) but
hopefully this is enough to bring swap usage to a reasonable level.
Reported by: wosch
PR: 225197
(i386 and arm) that never implement them. This allows the removal of
#ifdef PHYS_TO_DMAP on code otherwise protected by a runtime check on
PMAP_HAS_DMAP. It also fixes the build on ARM and i386 after I forgot an
#ifdef in r328168.
Reported by: Milan Obuch
Pointy hat to: me
kernel by PHYS_TO_DMAP() as previously present on amd64, arm64, riscv, and
powerpc64. This introduces a new MI macro (PMAP_HAS_DMAP) that can be
evaluated at runtime to determine if the architecture has a direct map;
if it does not (or does) unconditionally and PMAP_HAS_DMAP is either 0 or
1, the compiler can remove the conditional logic.
As part of this, implement PHYS_TO_DMAP() on sparc64 and mips64, which had
similar things but spelled differently. 32-bit MIPS has a partial direct-map
that maps poorly to this concept and is unchanged.
Reviewed by: kib
Suggestions from: marius, alc, kib
Runtime tested on: amd64, powerpc64, powerpc, mips64
Focus on code where we are doing multiplications within malloc(9). None of
these ire likely to overflow, however the change is still useful as some
static checkers can benefit from the allocation attributes we use for
mallocarray.
This initial sweep only covers malloc(9) calls with M_NOWAIT. No good
reason but I started doing the changes before r327796 and at that time it
was convenient to make sure the sorrounding code could handle NULL values.
X-Differential revision: https://reviews.freebsd.org/D13837
userspace to control NUMA policy administratively and programmatically.
Implement domainset based iterators in the page layer.
Remove the now legacy numa_* syscalls.
Cleanup some header polution created by having seq.h in proc.h.
Reviewed by: markj, kib
Discussed with: alc
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D13403
Even though pthreads doesn't support this, there are various alternative
APIs that use this. For example, uv_cond_timedwait() accepts a relative
timeout. So does Rust's std::sync::Condvar::wait_timeout().
Though I personally think that relative timeouts are bad (due to
imprecision for repeated operations), it does seem that people want
this. Extend the existing futex functions to keep track of whether an
absolute timeout is used in a boolean flag.
MFC after: 1 month
Email address has changed, uses consistent name (Matthew, not Matt)
Reported by: Matthew Macy <mmacy@mattmacy.io>
Differential Revision: https://reviews.freebsd.org/D13537
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
- Add a new KTR_STRUCT_ARRAY ktrace record type which dumps an array of
structures.
The structure name in the record payload is preceded by a size_t
containing the size of the individual structures. Use this to
replace the previous code that dumped the kevent arrays dumped for
kevent(). kdump is now able to decode the kevent structures rather
than dumping their contents via a hexdump.
One change from before is that the 'changes' and 'events' arrays are
not marked with separate 'read' and 'write' annotations in kdump
output. Instead, the first array is the 'changes' array, and the
second array (only present if kevent doesn't fail with an error) is
the 'events' array. For kevent(), empty arrays are denoted by an
entry with an array containing zero entries rather than no record.
- Move kevent decoding tables from truss to libsysdecode.
This adds three new functions to decode members of struct kevent:
sysdecode_kevent_filter, sysdecode_kevent_flags, and
sysdecode_kevent_fflags.
kdump uses these helper functions to pretty-print kevent fields.
- Move structure definitions for freebsd11 and freebsd32 kevent
structures to <sys/event.h> so that they can be shared with userland.
The 32-bit structures are only exposed if _WANT_KEVENT32 is defined.
The freebsd11 structures are only exposed if _WANT_FREEBSD11_KEVENT is
defined. The 32-bit freebsd11 structure requires both.
- Decode freebsd11 kevent structures in truss for the compat11.kevent()
system call.
- Log 32-bit kevent structures via ktrace for 32-bit compat kevent()
system calls.
- While here, constify the 'void *data' argument to ktrstruct().
Reviewed by: kib (earlier version)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D12470
Upon successful completion, the execve() system call invokes
exec_setregs() to initialize the registers of the initial thread of the
newly executed process. What is weird is that when execve() returns, it
still goes through the normal system call return path, clobbering the
registers with the system call's return value (td->td_retval).
Though this doesn't seem to be problematic for x86 most of the times (as
the value of eax/rax doesn't matter upon startup), this can be pretty
frustrating for architectures where function argument and return
registers overlap (e.g., ARM). On these systems, exec_setregs() also
needs to initialize td_retval.
Even worse are architectures where cpu_set_syscall_retval() sets
registers to values not derived from td_retval. On these architectures,
there is no way cpu_set_syscall_retval() can set registers to the way it
wants them to be upon the start of execution.
To get rid of this madness, let sys_execve() return EJUSTRETURN. This
will cause cpu_set_syscall_retval() to leave registers intact. This
makes process execution easier to understand. It also eliminates the
difference between execution of the initial process and successive ones.
The initial call to sys_execve() is not performed through a system call
context.
Reviewed by: kib, jhibbits
Differential Revision: https://reviews.freebsd.org/D13180
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Initially, only tag files that use BSD 4-Clause "Original" license.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D13133
in the LinuxKPI returns NULL. This happens when the VM area's private
data handle already exists and could cause a so-called NULL pointer
dereferencing issue prior to this fix.
Found by: greg@unrelenting.technology
MFC after: 1 week
Sponsored by: Mellanox Technologies
LinuxKPI task struct. Change type of "state" variable from "int" to
"atomic_t" to simplify code and avoid unneccessary casting.
MFC after: 1 week
Sponsored by: Mellanox Technologies
Compared to the previous version, v0.16, there are a couple of minor
changes:
- CLOUDABI_AT_PID: Process identifiers for CloudABI processes.
Initially, BSD process identifiers weren't exposed inside the runtime,
due to them being pretty much useless inside of a cluster computing
environment. When jobs are scheduled across systems, the BSD process
number doesn't act as an identifier. Even on individual systems they
may recycle relatively quickly.
With this change, the kernel will now generate a UUIDv4 when executing
a process. These UUIDs can be obtained within the process using
program_getpid(). Right now, FreeBSD will not attempt to store this
value. This should of course happen at some point in time, so that it
may be printed by administration tools.
- Removal of some unused structure members for polling.
With the polling framework being simplified/redesigned, it turns out
some of the structure fields were not used by the C library. We can
remove these to keep things nice and tidy.
Obtained from: https://github.com/NuxiNL/cloudabi
This pointer is checked during the linux_dev_open() callback and does
not need to be NULL checked again. It should always be set for
character devices belonging to the "linuxcdevsw" and technically
there is no need to NULL check this pointer at all.
Suggested by: kib @
MFC after: 1 week
Sponsored by: Mellanox Technologies
The most important change in this release is the removal of the
poll_fd() system call; CloudABI's equivalent of kevent(). Though I think
that kqueue is a lot saner than many of its alternatives, our
experience is that emulating this system call on other systems
accurately isn't easy. It has become a complex API, even though I'm not
convinced this complexity is needed. This is why we've decided to take a
different approach, by looking one layer up.
We're currently adding an event loop to CloudABI's C library that is API
compatible with libuv (except when incompatible with Capsicum).
Initially, this event loop will be built on top of plain inefficient
poll() calls. Only after this is finished, we'll work our way backwards
and design a new set of system calls to optimize it.
Interesting challenges will include integrating asynchronous I/O into
such a system call API. libuv currently doesn't aio(4) on Linux/BSD, due
to it being unreliable and having undesired semantics.
Obtained from: https://github.com/NuxiNL/cloudabi
Create a config file for PCI devices that exposes their configuration
space. Only fields needed by libdrm are filled in (vendor, device,
revision, subvendor and subdevice).
Link /sys/class/drm/card%d/device to the PCI device directory.
After some in-progress work is committed, this would otherwise be the only
instance of #if(n)def NO_SWAPPING in the tree. Moreover, the requisite
opt_vm.h include was missing, so the PHOLD/PRELE calls were always being
compiled in anyway.
MFC after: 1 week
then td->td_sel is NULL and this will result in a segfault inside selrecord().
This happens when only using kqueue() to poll for read and write events.
If select() and kqueue() is mixed there won't be a segfault.
Reported by: Johannes Lundberg
MFC after: 1 week
Sponsored by: Mellanox Technologies
All of these arguments are stored in m_ext, so there is no reason
to pass them in the argument list. Not all functions need the second
argument, some don't even need the first one. The second argument
lives in next cache line, so not dereferencing it is a performance
gain. This was discovered in sendfile(2), which will be covered by
next commits.
The second goal of this commit is to bring even more flexibility
to m_ext mbufs, allowing to create more fields in m_ext, opaque to
the generic mbuf code, and potentially set and dereferenced by
subsystems.
Reviewed by: gallatin, kbowling
Differential Revision: https://reviews.freebsd.org/D12615
gets drained before invoking the work function. Else the timer
mutex may still be in use which can lead to use-after-free situations,
because the work function might free the work structure before returning.
MFC after: 1 week
Sponsored by: Mellanox Technologies
