This patch is significantly based on previous work by jkim.
List of changes:
- added comments that describe topology uniformity assumption
- added reference to Intel Processor Topology Enumeration article
- documented a few global variables that describe topology
- retired weirdly set and used logical_cpus variable
- changed fallback code for mp_ncpus > 0 case, so that CPUs are treated
as being different packages rather than cores in a single package
- moved AMD-specific code to topo_probe_amd [jkim]
- in topo_probe_0x4() follow Intel-prescribed procedure of deriving SMT
and core masks and match APIC IDs against those masks [started by
jkim]
- in topo_probe_0x4() drop code for double-checking topology parameters
by looking at L1 cache properties [jkim]
- in topo_probe_0xb() add fallback path to topo_probe_0x4() as
prescribed by Intel [jkim]
Still to do:
- prepare for upcoming AMD CPUs by using new mechanism of uniform
topology description [pointed by jkim]
- probe cache topology in addition to CPU topology and probably use that
for scheduler affinity topology; e.g. Core2 Duo and Athlon II X2 have
the same CPU topology, but Athlon cores do not share L2 cache while
Core2's do (no L3 cache in both cases)
- think of supporting non-uniform topologies if they are ever
implemented for platforms in question
- think how to better described old HTT vs new HTT distinction, HTT vs
SMT can be confusing as SMT is a generic term
- more robust code for marking CPUs as "logical" and/or "hyperthreaded",
use HTT mask instead of modulo operation
- correct support for halting logical and/or hyperthreaded CPUs, let
scheduler know that it shouldn't schedule any threads on those CPUs
PR: kern/145385 (related)
In collaboration with: jkim
Tested by: Sergey Kandaurov <pluknet@gmail.com>,
Jeremy Chadwick <freebsd@jdc.parodius.com>,
Chip Camden <sterling@camdensoftware.com>,
Steve Wills <steve@mouf.net>,
Olivier Smedts <olivier@gid0.org>,
Florian Smeets <flo@smeets.im>
MFC after: 1 month
IFF_ALLMULTI/IFF_PROMISC as well as multicast filter configuration.
Rewrite RX filter logic to reduce number of register accesses and
make it handle promiscuous/allmulti toggling without controller
reinitialization.
Previously rl(4) counted on controller reinitialization to reprogram
promiscuous configuration but r211767 resulted in avoiding
controller reinitialization whenever promiscuous mode is toggled.
To address this, keep track of driver's view of interface state and
handle IFF_ALLMULTI/IFF_PROMISC changes without reinitializing
controller. This should fix a regression introduced in r211267.
While I'm here remove unnecessary variable reassignment in ioctl
handler.
PR: kern/151079
MFC after: 1 week
SI_SUB_RUN_SCHEDULER+SI_ORDER_ANY should only be used to call
scheduler() function which turns the initial thread into swapper proper
and thus there is no further SYSINIT processing.
Other SYSINITs with SI_SUB_RUN_SCHEDULER+SI_ORDER_ANY may get ordered
after scheduler() and thus never executed. That particular relative
order is semi-arbitrary.
Thus, change such places to use SI_ORDER_MIDDLE.
Also, use SI_ORDER_MIDDLE instead of correct, but less appealing,
SI_ORDER_ANY - 1.
MFC after: 1 week
number of unexplained interrupt problems. For some reason, using HPET
interrupts there breaks HDA sound. Legacy route mode interrupts reported
to work fine there.
controllers. bge(4) exported MAC statistics on controllers that
maintain the statistics in the NIC's internal memory. Newer
controllers require register access to fetch these values. These
counters provide useful information to diagnose driver issues.
The check for alignment should be made against the physical address and not
the virtual address that maps it.
Sponsored by: NetApp
Submitted by: Will McGovern (will at netapp dot com)
Reviewed by: mjacob, jhb
parent driver. Use that information to configure flow-control.
One drawback is there is no way to disable flow-control as we still
don't have proper way to not advertise RX/TX pause capability to
link partner. But I don't think it would cause severe problems and
users can selectively disable flow-control in switch port.
- license clause now contains "AUTHOR AND CONTRIBUTORS"
instead of just "AUTHOR"
- Add license/copyright to gpioc.c
Spotted by: Edward Tomasz Napierala, Andrew Turner
which were raised during hot-swap events. Now such events trigger cam
rescans, as is done in the mps driver.
Submitted by: Mark Johnston <mjohnston at sandvine dot com>
This fixes the bug where setting bw > 1 MTU/tick resulted in
infinite bandwidth if io_fast=1
PR: 147245 148429
Obtained from: Riccardo Panicucci
MFC after: 3 days
has reached. This reduced number of dropped frames when
flow-control is enabled. Previously it dropped incoming frames once
RX MBUF low watermark has reached. The value used in MAC RX MBUF
low watermark is greater than or equal to 4 so receiving two more
RX frames should not be a problem.
Obtained from: OpenBSD
net.inet.ip.fw.one_pass and always moved to the next rule
in case of a successful nat.
This should fix several related PR (waiting for feedback
before closing them)
PR: 145167 149572 150141
MFC after: 3 days
- handle compat32 processes;
- remove the checks for copied in addresses to belong into valid
usermode range, proc_rwmem() does this;
- simplify loop reading single string, limit the total amount of strings
collected by ARG_MAX bytes;
- correctly add '\0' at the end of each copied string;
- fix style.
In linprocfs_doprocenviron():
- unlock the process before calling copyin code [1]. The process is held
by pseudofs.
In linprocfs_doproccmdline:
- use linprocfs_doargv() to handle !curproc case for which p_args is not cached.
Reported by: plulnet [1]
Tested by: pluknet
Approved by: des (linprocfs maintainer, previous
version of the patch)
MFC after: 3 weeks
- GPIO bus controller interface
- GPIO bus interface
- Implementation of GPIO led(4) compatible device
- Implementation of iic(4) bus over GPIO (author: Luiz Otavio O Souza)
Tested by: Luiz Otavio O Souza, Alexandr Rybalko
- Sync shared code with Intel internal
- New client chipset support added
- em driver - fixes to 82574, limit queues to 1 but use MSIX
- em driver - large changes in TX checksum offload and tso
code, thanks to yongari.
- some small changes for watchdog issues.
- igb driver - local timer watchdog code was missing locking
this and a couple other watchdog related fixes.
- bug in rx discard found by Andrew Boyer, check for null pointer
MFC: a week
o) Give a virtual address for I/O ports on n64.
o) On the Portwell CAM-0100, return the right IRQ for the on-board SATA.
o) Except on bridges, only set PORTEN and MEMEN on devices that have I/O or
memory BARs respectively.
o) Disable PORTEN and MEMEN while reprogramming BARs.
o) On the Lanner MR-955, set the Tx DMA power register for the on-board Promise
SATA controller.
- Check for SMAP data from the loader first. If it exists, don't bother
doing any VM86 calls at all. This will be more friendly for non-BIOS
boot environments such as EFI, etc.
- Move the base memory setup into a new basemem_setup() routine instead
of duplicating it.
- Simplify the XEN case by removing all of the VM86/SMAP parsing code rather
than just jumping over it.
- Adjust some comments to better explain the code flow.
MFC after: 2 weeks
un-expiring.
The previous version of code have no locking when testing rt_refcnt.
The result of the lack of locking may result in a condition where
a routing entry have a reference count but at the same time have
RTPRF_OURS bit set and an expiration timer. These would eventually
lead to a panic:
panic: rtqkill route really not free
When the system have ICMP redirects accepted from local gateway
in a moderate frequency, for instance.
Commit this workaround for now until we have some better solution.
PR: kern/149804
Reviewed by: bz
Tested by: Zhao Xin, Pete French
MFC after: 2 weeks
specific devfs path already exists.
The function will be used from kern_conf.c to detect duplicate device
registrations. Callers must hold the devmtx mutex.
Reviewed by: kib
links. The reference counting is needed to be able to determine if a
specific devfs path exists. For true device file paths we can traverse
the cdevp_list but a separate directory list is needed for user created
symbolic links.
Add a new directory entry flag DE_USER to mark entries which should
unreference their parent directory on deletion.
A new function to traverse cdevp_list and the directory list will be
introduced in a separate commit.
Idea from: kib
Reviewed by: kib
