It's had a good life, but it's not really configurable and not really used.
Obtained from: opBSD (with some changes)
Differential Revision: https://reviews.freebsd.org/D14991
and VMware legal:
- Add a dual BSD-2 Clause/GPLv2 LICENSE file in the VMCI directory
- Remove the use of "All Rights Reserved"
- Per best practice, remove copyright/license info from Makefile
Reviewed by: imp, emaste, jhb, Vishnu Dasa <vdasa@vmware.com>
Approved by: VMware legal via Mark Peek <markpeek@vmware.com>
Differential Revision: https://reviews.freebsd.org/D14979
These have become unsorted from everything else. This is desync'd from
stable/11 due to some hand-merging that was done there, so the MFC of this
will look slightly different.
MFC after: 3 days
OpenCSD is an ARM CoreSight(tm) trace packets decoder.
- Connect libopencsd to the arm64 build.
- Install opencsd headers to /usr/include/opencsd/
Sponsored by: DARPA, AFRL
We intend to remove support before FreeBSD 12 is branched.
Reviewed by: imp, emaste
MFC after: 3 days
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14890
The ocs_fc(4) driver supports the following hardware:
Emulex 16/8G FC GEN 5 HBAS
LPe15004 FC Host Bus Adapters
LPe160XX FC Host Bus Adapters
Emulex 32/16G FC GEN 6 HBAS
LPe3100X FC Host Bus Adapters
LPe3200X FC Host Bus Adapters
The driver supports target and initiator mode, and also supports FC-Tape.
Note that the driver only currently works on little endian platforms. It
is only included in the module build for amd64 and i386, and in GENERIC
on amd64 only.
Submitted by: Ram Kishore Vegesna <ram.vegesna@broadcom.com>
Reviewed by: mav
MFC after: 5 days
Relnotes: yes
Sponsored by: Broadcom
Differential Revision: https://reviews.freebsd.org/D11423
Add a new "interleave" allocation policy which stripes pages across
domains with a stride or width keeping contiguity within a multi-page
region.
Move the kernel to the dedicated numbered cpuset #2 making it possible
to assign kernel threads and memory policy separately from user. This
also eliminates the need for the complicated interrupt binding code.
Add a sysctl API for viewing and manipulating domainsets. Refactor some
of the cpuset_t manipulation code using the generic bitset type so that
it can be used for both. This probably belongs in a dedicated subr file.
Attempt to improve the include situation.
Reviewed by: kib
Discussed with: jhb (cpuset parts)
Tested by: pho (before review feedback)
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14839
For some reason, the other link - https://lists.FreeBSD.org/ - needs
the trailing slash, otherwise man(8) renders it in a weird way. No
idea why's that. At least try to be consistent. Revert it when the
other link gets fixed.
MFC after: 2 weeks
In a virtual machine, VMCI is exposed as a regular PCI device. The primary
communication mechanisms supported are a point-to-point bidirectional
transport based on a pair of memory-mapped queues, and asynchronous
notifications in the form of datagrams and doorbells. These features are
available to kernel level components such as vSockets through the VMCI
kernel API. In addition to this, the VMCI kernel API provides support for
receiving events related to the state of the VMCI communication channels,
and the virtual machine itself.
Submitted by: Vishnu Dasa <vdasa@vmware.com>
Reviewed by: bcr, imp
Obtained from: VMware
Differential Revision: https://reviews.freebsd.org/D14289
DTB Overlays are useful to change/add nodes to a dtb without the need to
modify it.
Add support for building dtbo during buildkernel.
The goal of DTBO present in the FreeBSD source tree is to fill a gap in
time when we submit changes upstream (Linux). Instead of waiting 2 to 4 months
we can add a DTBO in tree in the meantime.
This is not for adding DTBO for capes/hat/addon boards, those will be
better to put in a ports.
This is also not for enabling a i2c/spi/pwm controller on certain pins,
each user have a different use case for those (which pins to use etc ...)
and we cannot have all possible configuration.
Add a dtbo for sun8i-h3-sid which add the SID node missing in upstream dts.
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D14782
Forwarded packets passed through PFIL_OUT, which made it difficult for
firewalls to figure out if they were forwarding or producing packets. This in
turn is an issue for pf for IPv6 fragment handling: it needs to call
ip6_output() or ip6_forward() to handle the fragments. Figuring out which was
difficult (and until now, incorrect).
Having pfil distinguish the two removes an ugly piece of code from pf.
Introduce a new variant of the netpfil callbacks with a flags variable, which
has PFIL_FWD set for forwarded packets. This allows pf to reliably work out if
a packet is forwarded.
Reviewed by: ae, kevans
Differential Revision: https://reviews.freebsd.org/D13715
from jailed process. These might get implemented in jails in the
future, but for now they are not supported.
Discussed on: freebsd-security@
Reviewed by: brueffer@
MFC after: 2 weeks
altq(4) to match altq(9). This makes preserving the history section as the
author of ALTQ easier in the history section, rather than calling it a framework
in the description & a system in the history.
Add a history section to altq(4) and extend the history section in altq(9)
Approved by: bcr (mentor)
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D14774
This is originally based on a patch from David Chisnall for soft-float
N64 but has since been updated to support O32, N32, and hard-float ABIs.
The soft-float O32, N32, and N64 support has been committed upstream.
The hard-float changes are still in review upstream.
Enable LLVM_LIBUNWIND on mips when building with a suitable (C+11-capable)
toolchain. This has been tested with external GCC for all ABIs and
O32 and N64 with clang.
Reviewed by: emaste
Obtained from: CheriBSD (original N64 patch)
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D14701
ECN (ABE)" proposal to the New Reno congestion control algorithm module.
ABE reduces the amount of congestion window reduction in response to
ECN-signalled congestion relative to the loss-inferred congestion response.
More details about ABE can be found in the Internet-Draft:
https://tools.ietf.org/html/draft-ietf-tcpm-alternativebackoff-ecn
The implementation introduces four new sysctls:
- net.inet.tcp.cc.abe defaults to 0 (disabled) and can be set to non-zero to
enable ABE for ECN-enabled TCP connections.
- net.inet.tcp.cc.newreno.beta and net.inet.tcp.cc.newreno.beta_ecn set the
multiplicative window decrease factor, specified as a percentage, applied to
the congestion window in response to a loss-based or ECN-based congestion
signal respectively. They default to the values specified in the draft i.e.
beta=50 and beta_ecn=80.
- net.inet.tcp.cc.abe_frlossreduce defaults to 0 (disabled) and can be set to
non-zero to enable the use of standard beta (50% by default) when repairing
loss during an ECN-signalled congestion recovery episode. It enables a more
conservative congestion response and is provided for the purposes of
experimentation as a result of some discussion at IETF 100 in Singapore.
The values of beta and beta_ecn can also be set per-connection by way of the
TCP_CCALGOOPT TCP-level socket option and the new CC_NEWRENO_BETA or
CC_NEWRENO_BETA_ECN CC algo sub-options.
Submitted by: Tom Jones <tj@enoti.me>
Tested by: Tom Jones <tj@enoti.me>, Grenville Armitage <garmitage@swin.edu.au>
Relnotes: Yes
Differential Revision: https://reviews.freebsd.org/D11616
no longer relevant (read: most of what was there) and adds some
quick links to point newcomers in the right direction.
Reviewed by: imp@
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D14680
