Book-E kernels really run at VM_MIN_KERNEL_ADDRESS, which currently happens to
be the same as KERNBASE. KERNBASE is the linked address, which the loader also
takes to be the physical load address. Treat KERNBASE as a physical address,
not a virtual, and change virtual address references for KERNBASE to use
something more appropriate.
It seems if a Radeon card is already initialized by u-boot, it won't be
reinitialized by the kernel, and the DRM module will fail to attach. This
steals the reset code from mips/octopci.c to blindly reset the bus on attach.
This was tested on a AmigaOne X5000/20, such that it can be booted from the
local video console, and get a video console in FreeBSD.
This driver was already 99% identical to the ofw_pcib_pci driver, except for
the attachment. Since ofw_pcib_pci is already a subclass of pcib, this
creates a private declaration of that class, to use for the base class for
this driver.
At some point in the future, ofw_pcib_pci_driver should probably be exported
to a header, so we're not tracking the softc struct contents, but for now,
since there's only this one other driver, it's not a pressing issue.
This code caused more problems than it should have fixed (boot failures) on
the machines I tested, so has been commented out for a while now. Remove
it, and assume the errata fixups were done by the bootloader where they
belong.
This makes it more consistent with FreeBSD norms, rather than using Linux's
norms. Now, instead of needing an environment variable
video-mode=fslfb:1280x1024@60
Now one would use a hint:
hint.fb.0.mode=1280x1024@60
Change OF_getencprop_alloc semantics to be combination of malloc and
OF_getencprop and return size of the property, not number of elements
allocated.
For the use cases where number of elements is preferred introduce
OF_getencprop_alloc_multi helper function that copies semantics
of OF_getencprop_alloc prior to this change.
This is to make OF_getencprop_alloc and OF_getencprop_alloc_multi
function signatures consistent with OF_getencprop_alloc and
OF_getencprop_alloc_multi.
Functionality-wise this patch is mostly rename of OF_getencprop_alloc
to OF_getencprop_alloc_multi except two calls in ofw_bus_setup_iinfo
where 1 was used as a block size.
OF_getprop_alloc takes element size argument and returns number of
elements in the property. There are valid use cases for such behavior
but mostly API consumers pass 1 as element size to get string
properties. What API users would expect from OF_getprop_alloc is to be
a combination of malloc + OF_getprop with the same semantic of return
value. This patch modifies API signature to match these expectations.
For the valid use cases with element size != 1 and to reduce
modification scope new OF_getprop_alloc_multi function has been
introduced that behaves the same way OF_getprop_alloc behaved prior to
this patch.
Reviewed by: ian, manu
Differential Revision: https://reviews.freebsd.org/D14850
These interfaces were put in place to let QorIQ SoCs dictate CPU idling
semantics, in order to support capabilities such as NAP mode and deep sleep.
However, this never stabilized, and the idling support reverted back to
CPU-level rather than SoC level. Move this code back to cpu.c instead. If
at a later date the lower power modes do come to fruition, it should be done
by overriding the cpu_idle_hook instead of this platform hook.
The L3 cache controller (Corenet Platform Cache) is listed with one of its
compatible strings as "cache", which this driver can't attach to. Restrict
to a known list of primary cache controller strings, as found in the l2cache
devicetree binding.
P1022 SATA controller may set the wrong CCR bit for a command completion.
This would previously cause an interrupt storm. Solve this by marking all
commands complete, and letting the end_transaction deal with the successes.
Causes no problems on P5020.
While here, fix a minor bug in collision detection. The Freescale SATA
controller only has 16 slots, not 32.
Some PowerQUICC and QorIQ platforms have a L2 cache managed via the
memory-mapped configuration registers, and appear as a node in the device
tree. This adds basic support to enable the cache.
The Display Interface Unit (DIU) uses main memory for the framebuffer, which
is already mapped as cache coherent physical memory. Prevent mmap() from
using its own attributes which may otherwise conflict.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
is set and the right thing to do may be platform-dependent (it requires
firmware on PowerNV, for instance). Make it a new platform method called
platform_smp_timebase_sync().
MFC after: 3 weeks
The interrupt map wasn't being allocated properly, preventing IRQs from being
allocated to children of the PCIe bus. Fix this by cloning the ofw_pcib_pci
code, which handles all cases -- device tree and probed.
In the future this may become a subclass of the ofw_pcib_pci driver, but as
that's not an exported class, it's cloned for now.
MFC after: 3 weeks
When the segment count is > 16 it spills into an 'indirect descriptor list',
which immediately follows the main table, but the indirect list is entry 15, so
needs to be skipped for the general list.
The Freescale SATA controller has many similarities to AHCI controllers, so
this driver is a heavily modified AHCI driver. Currently it seems to only
do SATA 1.0 speeds (~100-150MB/s), so there is still room for improvement.
Still to be done:
* Address erratum SATA-A-006187 -- Spread Spectrum Support (intermittent
non-recoverable transient data integrity error seen when SSC enabled).
* Linux doesn't read the log page as it hangs on the P1022. See if that's
applicable to this, and address accordingly.
* Try to determine what's holding back performance, and address it.
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D6071
gcc complains "cast to pointer from integer of different size". phandle_t is
*always* a uint32_t, so treat it as such, not as a pointer. Fixes 64-bit build.
P5040/P5021 have the same number of LAWs as P5020. There may be a better way of
getting the count from the FDT (fsl,num-laws property on soc/corenet-law or
soc/ecm-law), but that's not supported everywhere, so we still need this check
for those other cases.
Follow up r319935 by actually committing the mpc85xx_get_platform_clock()
function. This function was created to facilitate other development, and I
thought I had committed it earlier.
Some blocks depend on the platform clock rather than the system clock.
The System clock is derived from the platform clock as one-half the
platform clock. Rewrite mpc85xx_get_system_clock() to use the new
function.
Pointy-hat to: jhibbits
Many devices are clocked from the SoC's platform clock / 2. Some device nodes
include their own clock-frequency property, while others are dependent on the
SoC's bus-frequency property instead. To simplify, add a helper function to get
this clock.
Drop the tracking down to the pmap layer, with optimizations to only track
necessary pages. This should give a (slight) performance improvement, as well
as a stability improvement, as the tracking is already mostly handled by the
pmap layer.
Summary:
i.MX5 and PowerPC use a very similar eSDHC controller, which is also
similar to the uSDHC controller used by i.MX6. The imx_sdhci driver works
almost completely with PowerPC, with some minor tweaks.
There is one caveat with this: reset currently does not work on PowerPC, so has
been #ifdef'd out until this can be tracked down and fixed. If resets are done
the controller will timeout all data transactions. Without a reset, it appears
to work just fine.
This is part 3, following up r308186 and r308187.
Test Plan:
This has been tested on a PowerPC QorIQ P1022 board. It has not been
tested on i.MX, but no regressions are expected.
Reviewed By: imp
Differential Revision: https://reviews.freebsd.org/D8407
Setting the doze registers wasn't actually working, and was being masked by a
bad #ifdef. Since the #ifdef was fixed, now e500mc-based SoCs hang at idle.
Fix this by using the intended wait.
MFC after: 1 week
Summary:
This enables some features of the DIU, using a static configuration,
specified either via a 'edid' property on the 'display' FDT node, or a
'video-mode' environment variable (bootarg). 'video-mode' was chosen because it
matches u-boot's naming, so it can be set with:
setenv bootargs video-mode=${video-mode}
at the u-boot CLI.
Mouse cursor is not supported currently, as a hardware cursor is not supported
by framebuffer VT yet. Currently it only supports a 32bpp ARGB (actually BGRA)
format, and only a single composite plane, at up to 1280x1024.
Differential Revision: https://reviews.freebsd.org/D8022
Summary:
1) Attach problem - mpc85xx_probe() relies on fact that 0xfff0 mask matches all
QorIQ CPUs what is not true since e6500. This shall be reworked to match against
all supported CPUs.
2) There is no any reason for operating system to re-program or anyhow else
touch the LAWs programmed by firmware (u-boot). Right now mpc85xx_attach()
removes all LaW entries except for DRAM. This causes MCE to be generated when
later any of driver maps DTB-provided hardware addresses which do not exist
anymore because corresponding LaWs were removed.
Submitted by: Ivan Krivonos <int0dster_AT_gmail.com>
Differential Revision: https://reviews.freebsd.org/D7663
mpc85xx_map_dcsr() returns a vm_offset_t, not an error code.
mpc85xx_fix_errata() will gracefully exit if mpc85xx_map_dcsr() returns 0, as
that indicates an error (NULL pointer).
__syncicache() only syncs the icache on the current CPU, it doesn't touch the
cache on any other core. Replace the call with cpu_flush_dcache() instead.
Since bp_kernload is not touched again by the boot CPU in this code path, dcbf
is no less efficient than the dcbst from __syncicache() by invalidating the
cache line.
Summary:
u-boot, following the ePAPR specification, puts secondary cores into a
spinloop at boot, rather than leaving them shut off. It then relies on the host
OS to write the correct values to a special spin table, located in coherent
memory (on newer implementations), or noncoherent memory (older
implementations).
This supports both implementations of ePAPR, as well as continuing to support
non-ePAPR booting, by first attempting to use the spintable, and falling back to
expecting non-started CPUs.
Test Plan:
Booted on a P5020 board. Tested before and after the changes.
Before the changes, prints the error "SMP: CPU 1 already out of hold-off state!"
and panics shortly thereafter. After the changes, same boot method lets it
complete boot.
Reviewed by: nwhitehorn
MFC after: 2 weeks
Relnotes: Yes
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D7494
Summary:
MPC85XX and QorIQ are very similar. When the DPAA dTSEC driver was
added, QORIQ_DPAA was brought in as a config option to support the differences
in hardware register settings between QorIQ (e500mc-, e5500- based) SoCs and
QUICC (e500v1/e500v2-based) SoCs, particularly in the Local Access Window (LAW)
target settings.
Unify these settings using macros to hide details and ease porting, and use a
new function (mpc85xx_is_qoriq()) to distinguish between QorIQ and QUICC SoCs at
runtime.
An alternative to using the function could be to use a variable initialized at
platform attach time, which may incur less overhead at runtime. Since it's not
in the critical path once booted, this optimization doesn't seem necessary at
first pass.
Reviewed by: nwhitehorn
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D7294
Remove the use of fdt_data_to_res(), and instead construct the resources
manually. Additionally, avoid the 32-bit size limitation of fdt_data_get(), by
building physical addresses manually from the lbc ranges property.
Approved by: re@(gjb)
