doing PPPoE and the default MRU is therefore too big.
When negotiating with win2k, we ask for MRU 1492 and the win2k box
NAKs us saying ``MRU 1492''. This doesn't make sense to me. When
we continue to request MRU 1492, the win2k box eventually REJs our
MRU. This fix allows negotiations to continue at that point,
bringing the link up and potentially allowing the win2k box to send
us frames that are too large. AFAICT this is better than failing
to bring the link up.... probably !
I have no idea how to do the equivalent of ``route get'' or
``ifconfig -a'' under win2k, so I can't tell what MTU it actually
ends up using.
I believe the bug is in win2k (it's certainly mis-negotiating).
I'll MFC given the release engineers permission as code freeze
begins on August 1.
PR: 29277
MFC after: 3 days
inconsistently named "ptmp" and "etc_ptmp". This commit changes
it to "passwd_tmp" for consistency and to match OpenBSD's name
for the variable.
Consulted with: jedgar
once. If they repeat the request (again without the IPADDR option)
ACK it.
I've had reports that some ppp implementations will not assign
themselves an IP number. This should negotiate with such things.
MFC after: 3 days
When reading the code I had to stop, say "ok, what does *these*
modifications of strl*() do? Pull out grep. Oh, not in add/, maybe above
in ../lib/? Yep. So what do they do? Comments above them are misleading,
guess I'll have to read the code. Oh, they just test strl* against the
size and return the result of the test. Now I can continue to read the
code I was.
The uses of s_strl*() then test that result and errx()'s.
Lets think about the "optimized" code I am removing:
In general the compiler pushes the three args to strl* onto the stack and calls
s_strl*. s_strl* has to indirectly access 3 args from the stack. Then push
them on the stack a 2nd time for the real strl* call. s_strl* then pops the
return from strl* off the stack; or moves it from the register it was returned
in, to the register where tests can happen. s_strl* then pops the three
arguments to strl*. Perform the test, push the result of the test, or move it
from the result register to the return value register. The caller to s_strl*
now has to either pop the return value of s_strl* or move it from the return
value register to the test register. The caller then pops the three args to
s_strl* off the stack (the same args that s_strl* itself had to pop off after
the real call to strl*). The s_strl* caller then performs a simular test to
what has already been done, and conditionally jumps. By doing things this way, we've given the compiler optimizer less to work with.
Also, please don't forget the that call to s_strl* has possibly jumped to code
not in the cache due to being far away from the calling code, thus causing a
pipeline stall.
So where is the "optimization" from s_strl*?
It isn't code clarity.
It isn't code execution speed. It isn't code size either.
in the signal handlers which may pose a risk when executable by untrusted
users.
Submitted by: Przemyslaw Frasunek <venglin@freebsd.lublin.pl>
MFC After: 3 days
correct the error-checking that was there. With the old code, an error
return from getpwuid(daemon_user) could turn the lpd process into a very
effective fork-bomb...
Reviewed by: freebsd-audit freebsd-print (a little...)
MFC after: 6 days
blown over by the Hurricane and had a house dropped on you by the Tornado.
Now it's time to have your parade rained on by... the Typhoon!
This commit adds driver support for 3Com 3cR990 10/100 ethernet
adapters based on the Typhoon I and Typhoon II chipsets. This is actually
a port of the OpenBSD driver with many hacks by me.
No Virginia, there isn't any support for the hardware crypto yet. However
there is support for TCP/IP checksum offload and VLANs.
Special thanks go to Jason Wright, Aaron Campbell and Theo de Raadt for
squeezing enough info out of 3Com to get this written, and for doing
most of the hard work.
Manual page is included. Compiled as a module and included in GENERIC.
- Declare mtabhead as an extern in mounttab.h and define it only in
mounttab.c.
- Remove shared global `verbose' and instead pass it as a parameter.
- Remove the `mtabp' argument to read_mtab(). It served no purpose
whatsoever, although read_mtab() did use it as a temporary local
variable.
- Don't check for impossible conditions when parsing mounttab, and
do detect zero-length fields.
- Correctly test for strtoul() failures - just testing ERANGE is wrong.
- Include a field name in syslog errors, and avoid passing NULL to
a syslog %s field.
- Don't test if arrays are NULL.
- If there are duplicates when writing out mounttab, keep the last
entry instead of the first, as it will have a later timestamp.
- Fix a few formatting issues.
Update rpc.umntall and umount to match the mounttab interface changes.
- Remove unnecessary and unused local variables.
- Include useful information in error and warning messages.
- Fix the logic for expiring mounttab entries.
- Remove calls to getaddrinfo - the results were not used.
- Simplify some string handling by using snprintf.
- Fix usage.
than the long-standing -w option in NetBSD, so change it before anyone in
FreeBSD gets used to it. For now, -w is still accepted, but prints out
some warnings via syslog.
MFC after: 1 week
Problem 1 is that the config entry hangup flag is zeroed only at
CONNECT_ACTIVE_IND in msghdl.c. If any (other) call is disconnected
after EV_MDO and before CONNECT_ACTIVE_IND, the cleanup routine will
disconnect the in-progress dialout as well, if its hangup flag is
nonzero (which it is likely to be) after the previous incarnation of the
cfg entry. Patch-1 fixes this by clearing the hangup flag as soon as a
cfg entry is reserved for the call.
Submitted by: Juha-Matti Liukkonen <jml@cubical.fi>
Problem 2 is that doing a local hangup (eg. by writing "H" to the
dialout device) to a call which is already disconnected results in isdnd
moving the cfg entry to an illegal state, from which there is no
recovery. This is tricky because there is no way to synchronize local
hangup with the remote end (ie. the callee can always hang up at an
inconvenient time)! Hence, patch-2 alters fsm.c's EV_DRQ state table
such that the local hangup request is processed or ignored in most
states, even for disconnected calls.
Submitted by: Juha-Matti Liukkonen <jml@cubical.fi>
Don't set BINMODE to 500. This is not a setuid program.
Note: the dpt utilities have never been attached to the world and
haven't been compilable for a year or two.
- Lose any stray host bits that a user may have entered when providing
a network number and netmask to the `-a' option for IPv6. This is
corresponding to 1.79 that is for IPv4 only.
MFC after: 1 week
another, unknown option.
Submitted by: Naoki Kobayashi <shibata@geo.titech.ac.jp> and
Harti Brandt <brandt@fokus.gmd.de>, respectively.
Pointy hat to: dd
give an example of how to rotate logs at the beginning of the month.
Although they sound the same, since both of them rotate logs at the
beginning of the day, the former ended up taking place on, e.g., July
31 00:00 instead of the expected July 31 23:59. This is contraty to POLA.
Submitted by: Dan Langille <dan@langille.org>
e->cmd. free_entry() now does the right thing with
partially-initialized structures.
load_entry(): Don't call env_free() on e->envp throughout the routine
before jumping to eof; the free_entry() call at that label will take
care of it. The previous behavior resulted in e->envp being free'd
twice (well, the second time would usually result in a crash, but
that's besides the point); once in load_entry(), and once in
free_entry() after the former called the latter. Also note that the
check added to free_entry() (above) doesn't help, since e->envp wasn't
reset to NULL after env_free().
Submitted by: Mark Peek <mark@whistle.com>
this entire subtree would be in src/contrib, but if that isn't going
to happen at least this has a chance of warning off unsuspecting
committers.
Approved by: wollman
for glue records and forces the glue record to be reloaded from the real NS.
The 5% ttl reduction can cause the glue IN A to timeout before the NS
record in certain situations, such as when the domain owner does not match
up NS records with the NIC. This behavior by domain owners is becoming
more common as primary zone serving iterates through another glue level
(i.e. exodus hosts the master NS's but the customer then redirects the
NS's to the real DNS servers). The result is that named would appear to
work properly for about 40 minutes, and then unexpectedly fail for that
zone. This causes named to behave very inconsistently and a google search
shows that it has obviously frustrated many, many people. So until the bind
guys make named behave consistently (either fail instantly or accomodate the
case), we need to set this option to accomodate the case. The result
will be much more consistent behavior and fewer head-scratching failures.
MFC after: 3 days
receives them from other hosts. This is meant to protect from both
nefarious users (which maybe broke into some remote host that we accept
print jobs from), and broken implementations of lpr on other platforms.
This is done by changing recvjob.c to call the new ctl_renametf()
routine in the new common_source/ctlinfo.[ch] files. This will not
affect jobs coming via lpr on the local machine.
Reviewed by: freebsd-print@bostonradio.org & freebsd-audit
MFC after: 16 days
often by just telling gcc that some internal routine is "__printflike"
(work done by Kris Kennaway <kris@FreeBSD.org>). Also fix the new warnings
which show up once gcc starts checking the "printf-like parameters" passed
to those routines.
MFC after: 1 week
This fixes a problem with using print filters (if=, of=, etc) that showed
up in -current around June 20th. That problem initially reported by
Georg-W Koltermann <gwk@sgi.com>, while most of the investigation that
led to this fix was done by Anton Berezin <tobez@FreeBSD.org>.
Reviewed by: freebsd-print@bostonradio.org
MFC after: 1 week
- Use '\0' for a char instead of NULL.
- Explicitly compare against the global `nullstring' to determine if
a non-NULL uaddr is not malloc'd.
- Remove some unnecessary casting of the argument to free().
- In rpcbproc_callit_com(), move the freeing of m_uaddr to the
cleanup code at the end of the function.
- To avoid confusion and possible alignment problems, change
netbufdup() to allocate the netbuf struct and the sockaddr buffer
separately, and change netbuffree() accordingly. This makes it
produce netbufs that are consistent with all other netbufs in
rpcbind.
comparing bit by bit.
Make the logic in in6_fillscopeid() match that in our ifconfig(8):
only set the scope ID if there is one in the address and none in
sin6_scope_id.
Correct a comment in network_init() that didn't make sense; it was
probably never updated after it was pasted from similar code in
addrmerge().
stealth hints loading. 'make release' has been fixed to not need this
now anyway. If you want static hints, specify it explicitly.
Hey! Why did it suddenly get so dark??
getopt(3) (and can't be converted without breaking compatibility), and
it's very irritating to have it silently DTWT if one combines options
together (e.g., "-msS domain,server").
to be included into this one. This works the same way as #include
does in C; as far as the user is concerned, the included file is
inlined into the current one.
Since config(8) is no longer limited to working on one user-supplied
file, printing just a line number in an error message is not
sufficient. The new global variable yyfile represents the file
currently being parsed, and must be printed as well.
Reviewed by: imp
Obtained from: OpenBSD
until a 20ms select(2) timeout occurs, but if there is a continuous
stream of movement events, button events can be delayed indefinitely
because the select never has to wait long enough for a timeout.
The delay and mouse event reordering that result are very noticable
and sometimes quite frustrating when dragging windows etc. in X.
Add a simple mechanism that avoids this re-ordering. While a button
event is deferred, we discard up to 3 movement events to allow for
mouse jitter. If more movement events occur, then we immediately
timeout the deferred button event and let the movement proceed.
This change only affects the 3-button emulation case.
perform a key change, *and* our sequence numbers have wrapped,
ensure that the number of key changes is calculated correctly.
The previous code counted down from a negative number to zero,
re-encrypting the current key on each iteration - this took some
time and strangely enough got the answer wrong !!!
Fix a(nother) spelling mistake while I'm there.
Use -tag list in the FILES section to work around the bug
when .Pa font is not restored to its original value if one
of the -hang, -ohang, or -inset lists is used in the FILES
section. (The fix for the bug has just been submitted to
the GNU Groff maintainers.)
Also, fixed the Handbook reference in the SEE ALSO.
reading variable sized blocks of data every second. This should be
more efficient.
Suggested & tested by: se
* Add a syntax for excluding CD-ROM drives etc.
Suggested by: des, se, many others...
Manual page updates coming soon.
