* Remove ar5416UpdateChainmasks();
* Remove the TX chainmask override code from the ar5416 TX descriptor
setup routines;
* Write a driver method to calculate the current chainmask based on the
operating mode and update the driver state;
* Call the HAL chainmask method before calling ath_hal_reset();
* Use the currently configured chainmask in the TX descriptors rather than
the hardware TX chainmasks.
Tested:
* AR5416, STA/AP mode - legacy and 11n modes
Right now the only way to set the chainmask is to set the hardware
configured chainmask through capabilities. This is fine for forcing
the chainmask to be something other than what the hardware is capable
of (eg to reduce TX/RX to one connected antenna) but it does change what
the HAL hardware chainmask configuration is.
For operational mode changes, it (may?) make sense to separately control
the TX/RX chainmask.
Right now it's done as part of ar5416_reset.c - ar5416UpdateChainMasks()
calculates which TX/RX chainmasks to enable based on the operating mode.
(1 for legacy and whatever is supported for 11n operation.) But doing
this in the HAL is suboptimal - the driver needs to know the currently
configured chainmask in order to correctly enable things for each
TX descriptor. This is currently done by overriding the chainmask
config in the ar5416 TX routines but this has to disappear - the AR9300
HAL support requires the driver to dynamically set the TX chainmask based
on the TX power and TX rate in order to meet mini-PCIe slot power
requirements.
So:
* Introduce a new HAL method to set the operational chainmask variables;
* Introduce null methods for the previous generation chipsets;
* Add new driver state to record the current chainmask separate from
the hardware configured chainmask.
Part #2 of this will involve disabling ar5416UpdateChainMasks() and moving
it into the driver; as well as properly programming the TX chainmask
based on the currently configured HAL chainmask.
Tested:
* AR5416, STA mode - both legacy (11a/11bg) and 11n rates - verified
that AR_SELFGEN_MASK (the chainmask used for self-generated frames like
ACKs and RTSes) is correct, as well as the TX descriptor contents is
correct.
bootstrap liby. This was not readily apparent, because a normal 'make
buildworld' or 'make toolchain' builds liby before building anything
that uses yacc. However, 'make kernel-toolchain' does not build
headers or libraries, so it was not possible to build a kernel from
head on, say, stable/9 without first building the complete toolchain.
MFC after: 1 week
accessing files from various types of media nice and abstracted away from
the wet-work involved in preparing, validating, and initializing those
types of media. This will be used for the package management system module
and other modules that need access to files and want to allow the user to
decide where those files come from (either in a scripted fashion, prompted
fashion, or any combination thereof).
Heavily inspired by sysinstall and even uses the same reserved words so
that scripts are portable. Coded over months, tested continuously through-
out, and reviewed several times.
Some notes about the changes:
- Move network-setting acquisition/validation routines to media/tcpip.subr
- The options screen from sysinstall has been converted to a dialog menu
- The "UFS" media choice is renamed to "Directory" to reflect how sysinstall
treats the choice and a new [true] "UFS" media choice has been added that
acts on real UFS partitions (such as external disks with disklabels).
- Many more help files have been resurrected from sysinstall (I noticed that
some of the content seems a bit dated; I gave them a once-over but they
could really use an update).
- A total of 10 media choices are presented (via mediaGetType) including:
CD/DVD, FTP, FTP Passive, HTTP Proxy, Directory, NFS, DOS, UFS, Floppy, USB
- Novel struct/device management layer for managing the issue of passing
more information than can comfortably fit in an argument list.
currnet initialization sequence. Set it to simple mode only so that
systems can be updated from stable/7 to newer installations.
At some point, we should figure out why we cannot initialize performant
mode on this board.
PR: kern/153361
Reviewed by: scottl
Obtained from: Yahoo! Inc.
MFC after: 2 weeks
access, birth, change and modify times of two files, instead of only
being able to compare modify times. The builtin test in sh(1) will
automagically acquire the same expansion.
Approved by: grog
MFC after: 2 weeks
- Remove vestigial null pointer tests after malloc(..., M_WAITOK).
- Remove vestigal qualhack union
- Use strlcpy() instead of the error-prone strncpy() when parsing
EEPROM and copying strings
- Check the MAC address in the EEPROM strings more strictly.
- Expand the macro MXGE_NEXT_STRING() at its only user. Due to a typo,
the macro was very confusing.
- Remove unnecessary buffer limit check. The buffer is double-NUL
terminated per construction.
PR: kern/176369
Submitted by: Christoph Mallon <christoph.mallon gmx.de>
Merge the ZFS I/O deadman thread from vendor (illumos).
This feature panics the system on hanging ZFS I/O, helps debugging
and resumes failed service.
The panic behavior can be controlled with the loader-only tunables:
vfs.zfs.deadman_enabled (enable or disable panic on stalled ZFS I/O)
vfs.zfs.deadman_synctime (expiration time for stalled ZFS I/O)
By default, ZFS I/O deadman is enabled by default on amd64 and i386
excluding virtual guest machines.
Illumos ZFS issues:
3246 ZFS I/O deadman thread
References:
https://www.illumos.org/issues/3246
MFC after: 2 weeks
might have been enabled for them- now that we use all 32 bits of handle.
Fast Posting doesn't pass the full 32 bits.
Noticed by: Bugs in NetBSD. Only a NetBSD user might actually still use such old hardware.
MFC after: 1 week
introduction of the PBVM, this stopped being the case. Redefine the
VM parameters so that the PBVM is included in the kernel map. In
particular this introduces VM_INIT_KERNEL_ADDRESS to point to the base
of region 5 now that VM_MIN_KERNEL_ADDRESS points to the base of
region 4 to include the PBVM.
While here define KERNBASE to the actual link address of the kernel as
is intended.
PR: 169926
After digging through more carefully, it looks like there's
no real need to have the DTB in the module directory.
So we can simplify a lot: Just copy DTB into local heap
for "fdt addr" and U-Boot integration, drop all the extra
COPYIN() calls.
I've left one final COPYIN() to update the in-kernel DTB
for consistency with how this code used to work, but I'm
no longer convinced it's appropriate here.
I've also remove the mem_load_raw() utility that I added
to boot/common/module.c with r247045 since it's no longer
necessary.
* Reopen the directory using openat(fd, ".", ...) instead of opening the
pathname again. This fixes a race condition where the meaning of the
pathname changes and allows a reopen with fdopendir().
* Always reopen the directory for union stacks, not only when DTF_REWIND
is passed. Applications should be able to fchdir(dirfd(dir)) and
*at(dirfd(dir), ...). DTF_REWIND now does nothing.
sections and indirectly change the layout of an ELF file when
ELF_F_LAYOUT is not set.
PR: bin/167103
Approved by: rstone (co-mentor)
Obtained from: elftoolchain
MFC after: 2 weeks
initialized after FPIO controller since they might rely on GPIO
functionality
- Update interrupts property of dma node to contain all allocated
interrupts
Some hardware like DMA and GPIO controllers might require
more then 8 interrupts per device instance.
Submitted by: Daisuke Aoyama <aoyama at peach.ne.jp>
Discussed with: gber@, raj@
X86: Disable cmov-memory patterns on subtargets without cmov.
Fixes PR15115.
For the i386 arch, this should enable cmov instructions only on
-march=pentiumpro and higher. Since our default CPU is i486, cmov
instructions will now be disabled by default.
MFC after: 1 week
This was broken by r247045 which tried to copy the FDT into the
module directory immediately.
Instead, store the address and arrange for the FDT to get
copied into the module directory later when the usual
FDT initialization runs.
thread scheduled by interrupt fired after we entered critical section.
None of cpu_sleep() implementations on ARM check sched_runnable() now, so
put the first line of defence here. This mostly fixes unexpectedly long
sleeps in synthetic tests of calloutng code and probably other situations.
example from bsearch(3) too, so that we don't have to duplicate
the example code in both places.
PR: docs/176197
Reviewed by: stefanf
Approved by: remko (mentor), gjb (mentor)
MFC after: 1 week
Refactor the x86 CPU name logic in the driver and pass -march and -mcpu
flag information down from the Clang driver into the Gold linker plugin
for LTO. This allows specifying -march on the linker commandline and
should hopefully have it pass all the way through to the LTO optimizer.
Fixes PR14697.
Pull in r175919 from upstream clang trunk:
Driver: Pass down the -march setting down to -cc1as on x86 too.
The assembler historically didn't make use of any target features, but this has
changed when support for old CPUs that don't support long nops was added.
This should fix the long nops that still occurred in crt*.o, and
possibly other object files, if the system was compiled for a CPU that
does not support those, such as Geode.
Note that gcc on i386 also does not pass through any -march, -mcpu or
-mtune setting to gas, but this has not caused any trouble yet, because
gas defaults to i386.
Reported by: lev
MFC after: 1 week
data, introduced by r246713. There are two places where ata_request is
filled in ATA_CAM: ata_cam_begin_transaction() and ata_cam_request_sense().
In the first case DMA should be done for addresses from the CCB. In second
case, DMA should be done to the different address, the address of the sense
buffer inside the CCB structure itself.
- Some mxge nics may store the serial number in the SN2 field of the
EEPROM. These will also have an SN=0 field, so parse the SN2 field,
and give it precedence.
- Skip MXGEFW_CMD_UNALIGNED_TEST on mxge nics which do not require it.
This saves roughly 10ms per port at device attach time.
Sponsored by: Myricom
MFC After: 7 days
