objects' init functions instead of doing the setup via a constructor
in libc as the init functions may already depend on these handlers
to be in place. This gets us rid of:
- the undefined order in which libc constructors as __guard_setup()
and jemalloc_constructor() are executed WRT __sparc_utrap_setup(),
- the requirement to link libc last so __sparc_utrap_setup() gets
called prior to constructors in other libraries (see r122883).
For static binaries, crt1.o still sets up the user trap handlers.
o Move misplaced prototypes for MD functions in to the MD prototype
section of rtld.h.
o Sprinkle nitems().
Most notable, other than some style issues:
CVS 1.11:
do not use LOG_CONS.
CVS 1.13:
consistently use exit instead of return in main().
use LOG_WARNING instead of LOG_ERR for non critical errors.
Obtained from: NetBSD
MFC after: 2 weeks
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Initially, only tag files that use BSD 4-Clause "Original" license.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D13133
The old value was probably fine back in 1998, when that code was imported
(although the comments still mention VAX, which was quite obsolete by then);
now, however, it's too small to handle our libc, which results in some
additional calls to munmap/mmap later on. Asking for more virtual address
space is virtually free, and syscalls are not, thus the change.
It was suggested by kib@ that this might be a symptom of a deeper problem.
It doesn't only affect libc, though - the change also improves rtld memory
management for eg KDE libraries. I guess it's just a natural bloat.
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D12834
The directives I added in r323466 and r323501 did not define a valid
CFA until several instructions into the associated functions. This
triggers an assertion in GDB when generating a stack trace while
stopped at the first instruction of PLT stub entry point since there
is no valid CFA rule for the first instruction.
This is probably just wrong on my part as the non-simple .cfi_startproc
would have defined a valid CFA. Instead, define a valid CFA as sp + 0
at the start of the functions and then use .cfa_def_offset to change the
offset when sp is adjusted later in the function.
Sponsored by: DARPA / AFRL
This is only cosmetic, but the entry point for rtld is not a leaf function,
and this avoids two .frame directives for rtld_start.
Sponsored by: DARPA / AFRL
This removes the need to call munmap(2) afterwards.
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D12767
Apply authenticated user context after update of wtmp(5) at start of session,
so that ftpd process is not killed by kernel with SIGXFSZ when user has
"filesize" limit lower than size of system wtmp file. Same applies
to session finalization: revert to super-user context before update of wtmp.
If ftpd hits limit while writing a file at user request,
do not get killed with SIGXFSZ instantly but apparently ignore the signal,
process error and report it to the user, and continue with the session.
PR: 143570
Approved by: avg (mentor), mav (mentor)
MFC after: 1 week
If they are still needed, you can find them in the net/bsdrcmds port.
This was proposed June, 20th and approved by various committers [1].
They have been marked as deprecated on CURRENT in r320644 [2] on July, 4th.
Both stable/11 and release/11.1 contain the deprecation notice (thanks to
allanjude@).
Note that ruptime(1)/rwho(1)/rwhod(8) were initially thought to be part of
rcmds but this was a mistake and those are therefore NOT removed.
[1] https://lists.freebsd.org/pipermail/freebsd-arch/2017-June/018239.html
[2] https://svnweb.freebsd.org/base?view=revision&revision=320644
Reviewed by: bapt, brooks
Differential Revision: https://reviews.freebsd.org/D12573
in favor of just rendering the manpage instead of relying on pre-formatted
catpages. Note, this does not impede the ability to use existing catpages,
it just removes the utility to generate them.
Reviewed by: imp, allanjude
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D12317
Newer binutils supports extensions to the MIPS ABI for non-PIC code
that is used when compiling O32 binaries with clang 5 (but not used
for N64 oddly enough). These extensions require support for
R_MIPS_COPY relocations as well as a second PLT GOT using
R_MIPS_JUMP_SLOT relocations.
For R_MIPS_COPY, use the same approach as on other architectures where
fixups are deferred to the MD do_copy_relocations.
The additional PLT GOT for jump slots is located in a .got.plt section
which is identified by a DT_MIPS_PLTGOT dynamic entry. This GOT also
requires fixups for the first two GOT entries just as the normal GOT.
However, the entry point for this second GOT uses a different calling
convention. Rather than passing an offset into the GOT, it passes an
offset into the .rel.plt section. This requires a second entry point
(_rtld_pltbind_start) which calls the normal _rtld_bind() rather than
_mips_rtld_bind(). This also means providing a real version of
reloc_jmpslot() which is used by _rtld_bind().
In addition, add real implementions of reloc_plt() and
reloc_jmpslots() which walk .rel.plt handling R_MIPS_JUMP_SLOT
relocations.
Reviewed by: kib
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D12326
On hard-float 32-bit arm platforms, always search for the soft float
binaries in the alternative locations.
Sponsored by: Netflix
Differential Review: https://reviews.freebsd.org/D12274
MFC After: 1 week
This modification adds a new gettytab(5) option (iM) to specify a
program to run that will generate the initial (banner) message that is
displayed before the login prompt. Such a capability is useful when
dynamic information is needed in the banner message that cannot be
supplied by the set of % substitution sequences available in the "im"
option.
Reviewed by: vangyzen, wblock, manpages
Approved by: vangyzen (mentor)
MFC after: 1 week
Relnotes: yes
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D12108
In particular, the switch statement on the type of dynamic entries
in _rtld_relocate_nonplt_self() needs to not use a jump table since
jump tables on MIPS use local GOT entries which aren't initialized
until after this loop.
Suggested by: arichardson
Reviewed by: emaste
Sponsored by: DARPA / AFRL
Non-tests/... changes:
- Add HAS_TESTS= to Makefiles with libraries and programs to enable iteration
and propagate the appropriate environment down to *.test.mk.
tests/... changes:
- Add appropriate support Makefile.inc's to set HAS_TESTS in a minimal manner,
since tests/... is a special subdirectory tree compared to the others.
MFC after: 2 months
MFC with: r322511
Reviewed by: arch (silence), testing (silence)
Differential Revision: D12014
New version is not compatible on supervisor mode with v1.9.1
(previous version).
Highlights:
o BBL (Berkeley Boot Loader) provides no initial page tables
anymore allowing us to choose VM, to build page tables manually
and enable MMU in S-mode.
o SBI interface changed.
o GENERIC kernel.
FDT is now chosen standard for RISC-V hardware description.
DTB is now provided by Spike (golden model simulator). This
allows us to introduce GENERIC kernel. However, description
for console and timer devices is not provided in DTB, so move
these devices temporary to nexus bus.
o Supervisor can't access userspace by default. Solution is to
set SUM (permit Supervisor User Memory access) bit in sstatus
register.
o Compressed extension is now turned on by default.
o External GCC 7.1 compiler used.
o _gp renamed to __global_pointer$
o Compiler -march= string is now in use allowing us to choose
required extensions (compressed, FPU, atomic, etc).
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D11800
o Replace __riscv64 with (__riscv && __riscv_xlen == 64)
This is required to support new GCC 7.1 compiler.
This is compatible with current GCC 6.1 compiler.
RISC-V is extensible ISA and the idea here is to have built-in define
per each extension, so together with __riscv we will have some subset
of these as well (depending on -march string passed to compiler):
__riscv_compressed
__riscv_atomic
__riscv_mul
__riscv_div
__riscv_muldiv
__riscv_fdiv
__riscv_fsqrt
__riscv_float_abi_soft
__riscv_float_abi_single
__riscv_float_abi_double
__riscv_cmodel_medlow
__riscv_cmodel_medany
__riscv_cmodel_pic
__riscv_xlen
Reviewed by: ngie
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D11901
directories to SUBDIR.${MK_TESTS} idiom
This is being done to pave the way for future work (and homogenity) in
^/projects/make-check-sandbox .
No functional change intended.
MFC after: 1 weeks
How network VF works with hn(4) on Hyper-V in non-transparent mode:
- Each network VF has a cooresponding hn(4).
- The network VF and the it's cooresponding hn(4) have the same hardware
address.
- Once the network VF is up, e.g. ifconfig VF up:
o All of the transmission should go through the network VF.
o Most of the reception goes through the network VF.
o Small amount of reception may go through the cooresponding hn(4).
This reception will happen, even if the the cooresponding hn(4) is
down. The cooresponding hn(4) will change the reception interface
to the network VF, so that network layer and application layer will
be tricked into thinking that these packets were received by the
network VF.
o The cooresponding hn(4) pretends the physical link is down.
- Once the network VF is down or detached:
o All of the transmission should go through the cooresponding hn(4).
o All of the reception goes through the cooresponding hn(4).
o The cooresponding hn(4) fallbacks to the original physical link
detection logic.
All these features are mainly used to help live migration, during which
the network VF will be detached, while the network communication to the
VM must not be cut off. In order to reach this level of live migration
transparency, we use failover mode lagg(4) with the network VF and the
cooresponding hn(4) attached to it.
To ease user configuration for both network VF and non-network VF, the
lagg(4) will be created by the following rules, and the configuration
of the cooresponding hn(4) will be applied to the lagg(4) automatically.
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D11635
Use the standard syntax of name@version, I do not expect a confusion
due to unlikely possibility of the name containing the '@' character.
Requested by: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
