Add a new "interleave" allocation policy which stripes pages across
domains with a stride or width keeping contiguity within a multi-page
region.
Move the kernel to the dedicated numbered cpuset #2 making it possible
to assign kernel threads and memory policy separately from user. This
also eliminates the need for the complicated interrupt binding code.
Add a sysctl API for viewing and manipulating domainsets. Refactor some
of the cpuset_t manipulation code using the generic bitset type so that
it can be used for both. This probably belongs in a dedicated subr file.
Attempt to improve the include situation.
Reviewed by: kib
Discussed with: jhb (cpuset parts)
Tested by: pho (before review feedback)
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14839
global to per-domain state. Protect reservations with the free lock
from the domain that they belong to. Refactor to make vm domains more
of a first class object.
Reviewed by: markj, kib, gallatin
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14000
clear dirty bits for completely invalid blocks.
Otherwise we might not write out the last chunk that is shorter than
512 bytes, if the file end is not aligned on disk block boundary.
This become important after the r324794.
PR: 225586
Reported by: tris_vern@hotmail.com
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Initially, only tag files that use BSD 4-Clause "Original" license.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D13133
Only upgrade it to write mode if we need to clear dirty bits of the
partially valid page after EOF.
Suggested and reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
If filesystem block size is less than the page size, it is possible
that the page-out run contains partially clean pages. E.g., the chunk
of the page might be bdwrite()-ed, or some thread performed bwrite()
on a buffer which references a chunk of the paged out page. As
result, the assertion added in r319975, which checked that all pages
in the run are dirty, does not hold on such filesystems.
One solution is to remove the assert, but it is undesirable, because
we do overwrite the valid on-disk content. I cannot provide a scenario
where such write would corrupt the file data, but I do not like it on
principle. Another, in my opinion proper, solution is to only write
parts of the pages still marked dirty. The patch implements this, it
skips clean blocks and only writes the dirty block runs.
Note that due to clustering, write one page might clean other pages in
the run, so the next write range must be calculated only after the
current range is written out.
More, due to a possible invalidation, and the fact that the object
lock is dropped and reacquired before the checks, it is possible that
the whole page-out pages run appears to consist of only clean pages.
For this reason, it is impossible to assert that there is some work
for the pageout method to do (i.e. assert that there is at least one
dirty page in the run). But such clearing can only occur due to
invalidation, and not due to a parallel write, because we own the
vnode lock exclusive.
Reported by: fsu
In collaboration with: pho
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
Differential revision: https://reviews.freebsd.org/D12668
Suppose that a file on NFS has partially filled last page, and this
page is dirty. NFS VOP_PAGEOUT() method only marks the the page clean
up to the block of the last written byte, leaving other blocks dirty.
Also any page which erronously exists in the vnode vm_object past EOF
is also left marked as dirty.
With the introduction of the buf-cache coherent pager, each pass of
syncer over the object with such page results in creation of B_DELWRI
buffer due to VOP_WRITE() call. This buffer is noted on next syncer
pass, which results e.g. a visible manifestation of shutdown never
finishing vnode sync. Note that before buf-cache coherency commit, a
dirty page might left never synced to server if a partial writes
occur.
Fix this by clearing dirty bits after EOF. Only blocks of the partial
page which are completely after EOF are marked clean, to avoid
possible user data loss.
Reported by: mav
Reviewed by: alc, markj
Tested by: mav, pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D11697
- Add asserts that the pages to write are dirty. The last page, if
partially written, is only required to be dirty, while completely
written pages should have all dirty bit set.
- Use uintmax_t to print vm_page pindexes.
- Use NULL instead of casted zero.
- Remove if () test which duplicated the loop ending condition.
- Miscellaneous style fixes.
Reviewed by: alc, markj (previous version)
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
in place. To do per-cpu stats, convert all fields that previously were
maintained in the vmmeters that sit in pcpus to counter(9).
- Since some vmmeter stats may be touched at very early stages of boot,
before we have set up UMA and we can do counter_u64_alloc(), provide an
early counter mechanism:
o Leave one spare uint64_t in struct pcpu, named pc_early_dummy_counter.
o Point counter(9) fields of vmmeter to pcpu[0].pc_early_dummy_counter,
so that at early stages of boot, before counters are allocated we already
point to a counter that can be safely written to.
o For sparc64 that required a whole dummy pcpu[MAXCPU] array.
Further related changes:
- Don't include vmmeter.h into pcpu.h.
- vm.stats.vm.v_swappgsout and vm.stats.vm.v_swappgsin changed to 64-bit,
to match kernel representation.
- struct vmmeter hidden under _KERNEL, and only vmstat(1) is an exclusion.
This is based on benno@'s 4-year old patch:
https://lists.freebsd.org/pipermail/freebsd-arch/2013-July/014471.html
Reviewed by: kib, gallatin, marius, lidl
Differential Revision: https://reviews.freebsd.org/D10156
declaration block.
Reviewed by: markj (as part of the larger patch)
Tested by: pho (as part of the larger patch)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
X-Differential revision: https://reviews.freebsd.org/D10241
The swap pager enqueues laundered pages near the head of the inactive queue
to avoid another trip through LRU before reclamation. This change adds
support for this behaviour to the vnode pager and makes use of it in UFS and
ext2fs. Some ioflag handling is consolidated into a common subroutine so
that this support can be easily extended to other filesystems which make use
of the buffer cache. No changes are needed for ZFS since its putpages
routine always undirties the pages before returning, and the laundry
thread requeues the pages appropriately in this case.
Reviewed by: alc, kib
Differential Revision: https://reviews.freebsd.org/D8589
longer used. More precisely, they are always zero because the code that
decremented and incremented them no longer exists.
Bump __FreeBSD_version to mark this change.
Reviewed by: kib, markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8583
doesn't fit into a buf, then trim readbehind and readahead evenly. If
rbehind was limited by the previous BMAP, then roundup its trim to
block size.
- Add KASSERT to check that b_blkno has proper offset from original
blkno returned by BMAP. [1]
- Add KASSERT to check that pages in buf are consecutive.
Reviewed by: kib
Submitted by: kib [1]
not remove user-space visible fields from vm_cnt or all of the references to
cached pages from comments. Those changes will come later.)
Reviewed by: kib, markj
Tested by: pho
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8497
objects.
Assert that there is no new waiters for the already terminated objects.
Old waiters should have been notified by the termination calling
vnode_pager_dealloc() (old/new are with regard of the lock acquisition
interval).
Only clear the vp->v_object for the case of already terminated object,
since other branches call vnode_pager_dealloc(), which should clear
the pointer. Assert this.
Tested by: pho
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Approved by: re (gjb)
intention of the POSIX IEEE Std 1003.1TM-2008/Cor 1-2013.
A robust mutex is guaranteed to be cleared by the system upon either
thread or process owner termination while the mutex is held. The next
mutex locker is then notified about inconsistent mutex state and can
execute (or abandon) corrective actions.
The patch mostly consists of small changes here and there, adding
neccessary checks for the inconsistent and abandoned conditions into
existing paths. Additionally, the thread exit handler was extended to
iterate over the userspace-maintained list of owned robust mutexes,
unlocking and marking as terminated each of them.
The list of owned robust mutexes cannot be maintained atomically
synchronous with the mutex lock state (it is possible in kernel, but
is too expensive). Instead, for the duration of lock or unlock
operation, the current mutex is remembered in a special slot that is
also checked by the kernel at thread termination.
Kernel must be aware about the per-thread location of the heads of
robust mutex lists and the current active mutex slot. When a thread
touches a robust mutex for the first time, a new umtx op syscall is
issued which informs about location of lists heads.
The umtx sleep queues for PP and PI mutexes are split between
non-robust and robust.
Somewhat unrelated changes in the patch:
1. Style.
2. The fix for proper tdfind() call use in umtxq_sleep_pi() for shared
pi mutexes.
3. Removal of the userspace struct pthread_mutex m_owner field.
4. The sysctl kern.ipc.umtx_vnode_persistent is added, which controls
the lifetime of the shared mutex associated with a vnode' page.
Reviewed by: jilles (previous version, supposedly the objection was fixed)
Discussed with: brooks, Martin Simmons <martin@lispworks.com> (some aspects)
Tested by: pho
Sponsored by: The FreeBSD Foundation
o With new KPI consumers can request contiguous ranges of pages, and
unlike before, all pages will be kept busied on return, like it was
done before with the 'reqpage' only. Now the reqpage goes away. With
new interface it is easier to implement code protected from race
conditions.
Such arrayed requests for now should be preceeded by a call to
vm_pager_haspage() to make sure that request is possible. This
could be improved later, making vm_pager_haspage() obsolete.
Strenghtening the promises on the business of the array of pages
allows us to remove such hacks as swp_pager_free_nrpage() and
vm_pager_free_nonreq().
o New KPI accepts two integer pointers that may optionally point at
values for read ahead and read behind, that a pager may do, if it
can. These pages are completely owned by pager, and not controlled
by the caller.
This shifts the UFS-specific readahead logic from vm_fault.c, which
should be file system agnostic, into vnode_pager.c. It also removes
one VOP_BMAP() request per hard fault.
Discussed with: kib, alc, jeff, scottl
Sponsored by: Nginx, Inc.
Sponsored by: Netflix
The r289895 revision did not accounted for the block containing the
requested page, when calculating the run of pages. Include the pages
before/after the requested page, that fit into the reqblock, into the
calculation.
Noted by: glebius
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
pager. It is enough to execute VOP_BMAP() once to obtain both the
disk block address for the requested page, and the before/after limits
for the contiguous run. The clipping of the vm_page_t array passed to
the vnode_pager_generic_getpages() and the disk address for the first
page in the clipped array can be deduced from the call results.
While there, remove some noise (like if (1) {...}) and adjust nearby
code.
Reviewed by: alc
Discussed with: glebius
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
- Use pointer assignment rather than a combination of pointers and
flags to switch buffers between unmapped and mapped. This eliminates
multiple flags and generally simplifies the logic.
- Eliminate b_saveaddr since it is only used with pager bufs which have
their b_data re-initialized on each allocation.
- Gather up some convenience routines in the buffer cache for
manipulating buf space and buf malloc space.
- Add an inline, buf_mapped(), to standardize checks around unmapped
buffers.
In collaboration with: mlaier
Reviewed by: kib
Tested by: pho (many small revisions ago)
Sponsored by: EMC / Isilon Storage Division
should be done not with the number of pages in the first block, but with the
overall number of pages. While here, add KASSERT that makes sure that BMAP
doesn't return completely irrelevant blocks.
Reviewed by: kib
Tested by: pho
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
named objects to zero before the virtual address is selected. Previously,
the color setting was delayed until after the virtual address was
selected. In rtld, this delay effectively prevented the mapping of a
shared library's code section using superpages. Now, for example, we see
the first 1 MB of libc's code on armv6 mapped by a superpage after we've
gotten through the initial cold misses that bring the first 1 MB of code
into memory. (With the page clustering that we perform on read faults,
this happens quickly.)
Differential Revision: https://reviews.freebsd.org/D2013
Reviewed by: jhb, kib
Tested by: Svatopluk Kraus (armv6)
MFC after: 6 weeks
- Allow to call the function with vm object lock held.
- Allow to specify reqpage that doesn't match any page in the region,
meaning freeing all pages.
o Utilize the new function in couple more places in vnode pager.
Reviewed by: alc, kib
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
synchronous and asynchronous requests. The latter can saturate the
I/O and we do not want them to affect regular paging.
- Allocate the pbuf at the very beginning of the function, so that
if we are low on certain kind of pbufs don't even proceed to BMAP,
but sleep.
Reviewed by: kib
Sponsored by: Nginx, Inc.
Sponsored by: Netflix
o Provide a new VOP_GETPAGES_ASYNC(), which works like VOP_GETPAGES(), but
doesn't sleep. It returns immediately, and will execute the I/O done handler
function that must be supplied as argument.
o Provide VOP_GETPAGES_ASYNC() for the FFS, which uses vnode_pager.
o Extend pagertab to support pgo_getpages_async method, and implement this
method for vnode_pager.
Reviewed by: kib
Tested by: pho
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
Eliminate an exclusive object lock acquisition and release on the expected
execution path.
Do page zeroing before the object lock is acquired rather than during the
time that the object lock is held.
Use vm_pager_free_nonreq() to eliminate duplicated code.
Reviewed by: kib
MFC after: 6 weeks
Sponsored by: EMC / Isilon Storage Division
by ffs and ext2fs. Remove duplicated call to vm_page_zero_invalid(),
done by VOP and by vm_pager_getpages(). Use vm_pager_free_nonreq().
Reviewed by: alc (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 6 weeks (after r271596)
path through the NFS clients' getpages functions.
Introduce vm_pager_free_nonreq(). This function can be used to eliminate
code that is duplicated in many getpages functions. Also, in contrast to
the code that currently appears in those getpages functions,
vm_pager_free_nonreq() avoids acquiring an exclusive object lock in one
case.
Reviewed by: kib
MFC after: 6 weeks
Sponsored by: EMC / Isilon Storage Division
The changes should not modify the generated code.
The pager->pgo_putpages() method takes int flags as its fourth
argument, while vnode_pager_putpages() used boolean_t (which is
typedef'ed to int). The flags are from VM_PAGER_* namespace, while
vnode_pager_putpages() passed TRUE and OBJPC_SYNC to VOP_PUTPAGES(),
which both are numerically equal to VM_PAGER_PUT_SYNC.
Noted and reviewed by: alc (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
To reduce the diff struct pcu.cnt field was not renamed, so
PCPU_OP(cnt.field) is still used. pc_cnt and pcpu are also used in
kvm(3) and vmstat(8). The goal was to not affect externally used KPI.
Bump __FreeBSD_version_ in case some out-of-tree module/code relies on the
the global cnt variable.
Exp-run revealed no ports using it directly.
No objection from: arch@
Sponsored by: EMC / Isilon Storage Division
