Commit b3d4c70dc6 added support for CLAIM_DELEG_CUR_FH to Open.
While doing this, I noticed that CLAIM_DELEG_PREV_FH support
could be added the same way. Although I am not aware of any extant
NFSv4.1/4.2 client that uses this claim type, it seems prudent to add
support for this variant of Open to the NFSv4.1/4.2 server.
This patch does not affect mounts from extant NFSv4.1/4.2 clients,
as far as I know.
MFC after: 2 weeks
The most difficult NFSv4 client recovery case happens when the
lease has expired on the server. For NFSv4.0, the client will
receive a NFSERR_EXPIRED reply from the server to indicate this
has happened.
For NFSv4.1/4.2, most RPCs have a Sequence operation and, as such,
the client will receive a NFSERR_BADSESSION reply when the lease
has expired for these RPCs. The client will then call nfscl_recover()
to handle the NFSERR_BADSESSION reply. However, for the expired lease
case, the first reclaim Open will fail with NFSERR_NOGRACE.
This patch recognizes this case and calls nfscl_expireclient()
to handle the recovery from an expired lease.
This patch only affects NFSv4.1/4.2 mounts when the lease
expires on the server, due to a network partitioning that
exceeds the lease duration or similar.
MFC after: 2 weeks
Recent discussion on the nfsv4@ietf.org mailing list confirmed
that an NFSv4 server should reply to an RPC in less than 1second.
If an NFSv4 RPC requires a delegation be recalled,
the server will attempt a CB_RECALL callback.
If the client is not responsive, the RPC reply will be delayed
until the callback times out.
Without this patch, the timeout is set to 4 seconds (set in
ticks, but used as seconds), resulting in the RPC reply taking over 4sec.
This patch redefines the constant as being in milliseconds and it
implements that for a value of 800msec, to ensure the RPC
reply is sent in less than 1second.
This patch only affects mounts from clients when delegations
are enabled on the server and the client is unresponsive to callbacks.
MFC after: 2 weeks
The Linux NFSv4.1/4.2 client now uses the CLAIM_DELEG_CUR_FH
variant of the Open operation when delegations are recalled and
the client has a local open of the file. This patch adds
support for this variant of Open to the NFSv4.1/4.2 server.
This patch only affects mounts from Linux clients when delegations
are enabled on the server.
MFC after: 2 weeks
Commit 7a606f280a allowed the server to do retries of CB_RECALL
callbacks every couple of seconds. This was needed to allow the
Linux client to re-establish the back channel.
However this patch broke the delegation timeout check, such that
it would just keep retrying CB_RECALLS.
If the client has crashed or been network patitioned from the
server, this continues until the client TCP reconnects to
the server and re-establishes the back channel.
This patch modifies the code such that it still times out the
delegation recall after some minutes, so that the server will
allow the conflicting client request once the delegation times out.
This patch only affects the NFSv4 server when delegations are
enabled and a NFSv4 client that holds a delegation has crashed
or been network partitioned from the server for at least several
minutes when a delegation needs to be recalled.
MFC after: 2 weeks
Remove OBJT_SWAP_TMPFS. Move tmpfs-specific swap pager bits into
tmpfs_subr.c.
There is no longer any code to directly support tmpfs in sys/vm, most
tmpfs knowledge is shared by non-anon swap object type implementation.
The tmpfs-specific methods are provided by registered tmpfs pager, which
inherits from the swap pager.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D30168
to get object type, and stop enumerating OBJT_XXX constants. This also
provides properly a pointer for the vnode, if object backs any.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D30168
There are two module declarations in the nfscl.ko module for "nfscl"
and "nfs". Both of these declarations had MODULE_DEPEND() calls.
This patch deletes the MODULE_DEPEND() calls for "nfs" to avoid
confusion with respect to what modules this module is dependent upon.
The patch also adds comments explaining why there are two module
declarations within the module.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D30102
There is a NFSv4 file attribute called TimeCreate
that can be used for va_birthtime.
r362175 added some support for use of TimeCreate.
This patch completes support of va_birthtime by adding
support for setting this attribute to the server.
It also eanbles the client to
acquire and set the attribute for a NFSv4
server that supports the attribute.
Reviewed by: markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D30156
This is OBJT_SWAP pager, specialized for tmpfs. Right now, both swap pager
and generic vm code have to explicitly handle swap objects which are tmpfs
vnode v_object, in the special ways. Replace (almost) all such places with
proper methods.
Since VM still needs a notion of the 'swap object', regardless of its
use, add yet another type-classification flag OBJ_SWAP. Set it in
vm_object_allocate() where other type-class flags are set.
This change almost completely eliminates the knowledge of tmpfs from VM,
and opens a way to make OBJT_SWAP_TMPFS loadable from tmpfs.ko.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D30070
It is needed to invalidate cache in case of inode space removal
to avoid situation, when extents cache returns not exist extent.
Reviewed by: pfg
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D29931
It is possible to walk thru inode extents if EXT2FS_PRINT_EXTENTS
macro is defined. The extents headers magics and physical blocks
ranges are checked during extents walk.
Reviewed by: pfg
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D29932
The dev field is placed into the inode structure.
The major/minor numbers conversion to/from linux compatile
format happen during on-disk inodes writing/reading.
Reviewed by: pfg
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D29930
The birthtime field of struct vattr does not checked
for VNOVAL in case of ext2_setattr() and produce incorrect
inode birthtime values.
Found using pjdfstest:
pjdfstest/tests/utimensat/03.t
Reviewed by: pfg
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D29929
When loading attributes from the cache, the NFS client is careful to
copy only the fields that it initialized. After fetching attributes
from the server, however, it would copy the entire vattr structure
initialized from the RPC response, so uninitialized stack bytes would
end up being copied to userspace. In particular, va_birthtime (v2 and
v3) and va_gen (v3) had this problem.
Use a common subroutine to copy fields provided by the NFS client, and
ensure that we provide a dummy va_gen for the v3 case.
Reviewed by: rmacklem
Reported by: KMSAN
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D30090
devvn_refthread() will initialize *devp only if it succeeds, so check for
success before comparing with fp->f_data. Other devvn_refthread()
callers are careful to do this.
Reported by: KMSAN
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D30068
Commit aad780464f added a function called nfscl_delegreturnvp()
to return delegations during the NFS VOP_RECLAIM().
The function erroneously assumed that nm_clp would
be non-NULL. It will be NULL for NFSV4.0 mounts until
a regular file is opened. It will also be NULL during
vflush() in nfs_unmount() for a forced dismount.
This patch adds a check for clp == NULL to fix this.
Also, since it makes no sense to call nfscl_delegreturnvp()
during a forced dismount, the patch adds a check for that
case and does not do the call during forced dismounts.
PR: 255436
Reported by: ish@amail.plala.or.jp
MFC after: 2 weeks
For a pNFS mount, the NFSv4.1/4.2 client uses compound RPCs that
have both Open and LayoutGet operations in them.
If the pNFS server were tp reply NFSERR_DELAY for one of these
compounds, the retry after a delay cannot be handled by
newnfs_request(), since there is a reference held on the open
state for the Open operation in them.
Fix this by adding these RPCs to the "don't do delay here"
list in newnfs_request().
This patch is only needed if the mount is using pNFS (the "pnfs"
mount option) and probably only matters if the MDS server
is issuing delegations as well as pNFS layouts.
Found by code inspection.
MFC after: 2 weeks
Commit 4281bfec36 patched the server so that the
callback session slot would be free'd for reuse when
a callback attempt fails.
However, this can often result in the sequence# for
the session slot to be advanced such that the client
end will reply NFSERR_SEQMISORDERED.
To avoid the NFSERR_SEQMISORDERED client reply,
this patch negates the sequence# advance for the
case where the callback has failed.
The common case is a failed back channel, where
the callback cannot be sent to the client, and
not advancing the sequence# is correct for this
case. For the uncommon case where the client's
reply to the callback is lost, not advancing the
sequence# will indicate to the client that the
next callback is a retry and not a new callback.
But, since the FreeBSD server always sets "csa_cachethis"
false in the callback sequence operation, a retry
and a new callback should be handled the same way
by the client, so this should not matter.
Until you have this patch in your NFSv4.1/4.2 server,
you should consider avoiding the use of delegations.
Even with this patch, interoperation with the
Linux NFSv4.1/4.2 client in kernel versions prior
to 5.3 can result in frequent 15second delays if
delegations are enabled. This occurs because, for
kernels prior to 5.3, the Linux client does a TCP
reconnect every time it sees multiple concurrent
callbacks and then it takes 15seconds to recover
the back channel after doing so.
MFC after: 2 weeks
After a vnode is recycled it can no longer be
acquired via vfs_hash_get() and, as such,
a delegation for the vnode cannot be recalled.
In the unlikely event that a delegation still
exists when the vnode is being recycled, return
the delegation since it will no longer be
recallable.
Until you have this patch in your NFSv4 client,
you should consider avoiding the use of delegations.
MFC after: 2 weeks
Without this patch, if a NFSv4 server recalled a
delegation when the file is not open, the renew
thread would block in the NFS VOP_INACTIVE()
trying to acquire the client state lock that it
already holds.
This patch fixes the problem by delaying the
vrele() call until after the client state
lock is released.
This bug has been in the NFSv4 client for
a long time, but since it only affects
delegation when recalled due to another
client opening the file, it got missed
during previous testing.
Until you have this patch in your client,
you should avoid the use of delegations.
MFC after: 2 weeks
When the NFSv4.1/4.2 server does a callback to a client
on the back channel, it will use a session slot in the
back channel session. If the back channel has failed,
the callback will fail and, without this patch, the
session slot will not be released.
As more callbacks are attempted, all session slots
can become busy and then the nfsd thread gets stuck
waiting for a back channel session slot.
This patch frees the session slot upon callback
failure to avoid this problem.
Without this patch, the problem can be avoided by leaving
delegations disabled in the NFS server.
MFC after: 2 weeks
At a recent testing event I found out that I had misinterpreted
RFC5661 where it describes the stripe size in the File Layout's
nfl_util field. This patch fixes the pNFS File Layout server
so that it returns the correct value to the NFSv4.1/4.2 pNFS
enabled client.
This affects almost no one, since pNFS server configurations
are rare and the extant pNFS aware NFS clients seemed to
function correctly despite the erroneous stripe size.
It *might* be needed for correct behaviour if a recent
Linux client mounts a FreeBSD pNFS server configuration
that is using File Layout (non-mirrored configuration).
MFC after: 2 weeks
This reverts commit 9edaceca81.
It turns out that the Linux client intentionally does an NFSv4.1
RPC with only a Sequence operation in it and with "seqid + 1"
for the slot. This is used to re-synchronize the slot's seqid
and the client expects the NFS4ERR_SEQ_MISORDERED error reply.
As such, revert the patch, so that the server remains RFC5661
compliant.
Since 7763814fc9 nfsrpc_setclient() uses mem_alloc() that is macro
around malloc(M_RPC). M_RPC is provided by xdr.ko.
Reviewed by: rmacklem
Sponsored by: Mellanox Technologies/NVidia Networking
MFC after: 1 week
Recent testing of network partitioning a FreeBSD NFSv4.1
server from a Linux NFSv4.1 client identified problems
with both the FreeBSD server and Linux client.
Sometimes, after some Linux NFSv4.1/4.2 clients establish
a new TCP connection, they will advance the sequence number
for a session slot by 2 instead of 1.
RFC5661 specifies that a server should reply
NFS4ERR_SEQ_MISORDERED for this case.
This might result in a system call error in the client and
seems to disable future use of the slot by the client.
Since advancing the sequence number by 2 seems harmless,
allow this case if vfs.nfs.linuxseqsesshack is non-zero.
Note that, if the order of RPCs is actually reversed,
a subsequent RPC with a smaller sequence number value
for the slot will be received. This will result in
a NFS4ERR_SEQ_MISORDERED reply.
This has not been observed during testing.
Setting vfs.nfs.linuxseqsesshack to 0 will provide
RFC5661 compliant behaviour.
This fix affects the fairly rare case where a NFSv4
Linux client does a TCP reconnect and then apparently
erroneously increments the sequence number for the
session slot twice during the reconnect cycle.
PR: 254816
MFC after: 2 weeks
During a recent testing event, it was reported that the NFSv4.1/4.2
server erroneously bound the back channel to a new TCP connection.
RFC5661 specifies that the fore channel is implicitly bound to a
new TCP connection when an RPC with Sequence (almost any of them)
is done on it. For the back channel to be bound to the new TCP
connection, an explicit BindConnectionToSession must be done as
the first RPC on the new connection.
Since new TCP connections are created by the "reconnect" layer
(sys/rpc/clnt_rc.c) of the krpc, this patch adds an optional
upcall done by the krpc whenever a new connection is created.
The patch also adds the specific upcall function that does a
BindConnectionToSession and configures the krpc to call it
when required.
This is necessary for correct interoperability with NFSv4.1/NFSv4.2
servers when the nfscbd daemon is running.
If doing NFSv4.1/NFSv4.2 mounts without this patch, it is
recommended that the nfscbd daemon not be running and that
the "pnfs" mount option not be specified.
PR: 254840
Comments by: asomers
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D29475
Recent testing of network partitioning a FreeBSD NFSv4.1
server from a Linux NFSv4.1 client identified problems
with both the FreeBSD server and Linux client.
Commit 05a39c2c1c fixed replying with the cached reply in
in the session slot if same session slot sequence#.
However, the code uses the reply and, as such,
will fail for a subsequent retry of the RPC.
A subsequent retry would be an extremely rare event,
but this patch fixes this, so long as m_copym(..M_NOWAIT)
does not fail, which should also be a rare event.
This fix affects the exceedingly rare case where a NFSv4
client retries a non-idempotent RPC, such as a lock
operation, multiple times. Note that retries only occur
after the client has needed to create a new TCP connection,
with a new TCP connection for each retry.
MFC after: 2 weeks
Recent testing of network partitioning a FreeBSD NFSv4.1
server from a Linux NFSv4.1 client identified problems
with both the FreeBSD server and Linux client.
The FreeBSD server failec to reply using the cached
reply in the session slot when an RPC was retried on
the session slot, as indicated by same slot sequence#.
This patch fixes this. It should also fix a similar
failure for NFSv4.0 mounts, when the sequence# in
the open/lock_owner requires a reply be done from
an entry locked into the DRC.
This fix affects the fairly rare case where a NFSv4
client retries a non-idempotent RPC, such as a lock
operation. Note that retries only occur after the
client has needed to create a new TCP connection.
MFC after: 2 weeks
Commit 01ae8969a9 stopped the NFSv4.1/4.2 server from implicitly
binding the back channel to a new TCP connection so that it
conforms to RFC5661, for NFSv4.1/4.2. An effect of this
for the Linux NFS client is that it will do a
BindConnectionToSession when it sees NFSV4SEQ_CBPATHDOWN
set in a sequence reply. This will fix the back channel, but the
first attempt at a callback like CB_RECALL will already have
failed. Without this patch, a CB_RECALL will not be retried
and that can result in a 5 minute delay until the delegation
times out.
This patch modifies the code so that it will retry the
CB_RECALL every couple of seconds, often avoiding the
5 minute delay.
This is not critical for correct behaviour, but avoids
the 5 minute delay for the case where the Linux client
re-binds the back channel via BindConnectionToSession.
MFC after: 2 weeks
Commit 01ae8969a9 stopped the NFSv4.1/4.2 server from implicitly
binding the back channel to a new TCP connection so that it
conforms to RFC5661, for NFSv4.1/4.2. An effect of this
for the Linux NFS client is that it will do a
BindConnectionToSession when it sees NFSV4SEQ_CBPATHDOWN
set in a sequence reply. It will do this for every RPC
reply until it no longer sees the flag.
Without that patch, this will happen until the client does
an Open, which will clear LCL_CBDOWN.
This patch clears LCL_CBDOWN right away, so that
NFSV4SEQ_CBPATHDOWN will no longer be sent to the client
in Sequence replies and the Linux client will not repeat
the BindConnectionToSession RPCs.
This is not critical for correct behaviour, but reduces
RPC overheads for cases where the Open will not be done
for a while.
MFC after: 2 weeks
The VFS conventions is that VOP_LOOKUP() methods do not need to handle
ISDOTDOT lookups for VV_ROOT vnodes (since they cannot, after all). Nullfs
bypasses VOP_LOOKUP() to lower filesystem, and there, due to user actions,
it is possible to get into situation where
- upper vnode does not have VV_ROOT set
- lower vnode is root
- ISDOTDOT is requested
User just needs to nullfs-mount non-root of some filesystem, and then move
some directory under mount, out of mount, using lower filesystem.
In this case, nullfs cannot do much, but we still should and can ensure
internal kernel structures are consistent. Avoid ISDOTDOT lookup forwarding
when VV_ROOT is set on lower dvp, return somewhat arbitrary ENOENT.
PR: 253593
Reported by: Gregor Koscak <elogin41@gmail.com>
Test by: Patrick Sullivan <sulli00777@gmail.com>
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Commit fdc9b2d50f replaced a couple of while loops with LIST_FOREACH()
loops. This patch factors the body of that loop out into a separate
function called nfscl_checkown().
This prepares the code for future changes to use a hash table of
lists for open searches via file handle.
This patch should not result in a semantics change.
MFC after: 2 weeks
The NFSv4.1 (and 4.2 on 13) server incorrectly binds
a new TCP connection to the back channel when first
used by an RPC with a Sequence op in it (almost all of them).
RFC5661 specifies that only the fore channel should be bound.
This was done because early clients (including FreeBSD)
did not do the required BindConnectionToSession RPC.
Unfortunately, this breaks the Linux client when the
"nconnects" mount option is used, since the server
may do a callback on the incorrect TCP connection.
This patch converts the server behaviour to that
required by the RFC. It also makes the server test/indicate
failure of the back channel more aggressively.
Until this patch is applied to the server, the
"nconnects" mount option is not recommended for a Linux
NFSv4.1/4.2 client mount to the FreeBSD server.
Reported by: bcodding@redhat.com
Tested by: bcodding@redhat.com
PR: 254560
MFC after: 1 week
This patch replaces a couple of while() loops with LIST_FOREACH() loops.
While here, declare a couple of variables "bool".
I think LIST_FOREACH() is preferred and makes the code more readable.
This also prepares the code for future changes to use a hash table of
lists for open searches via file handle.
This patch should not result in a semantics change.
MFC after: 2 weeks
If a delegation for a file has been acquired, the "oneopenown" option
was ignored when the local open was issued. This could result in multiple
openowners/opens for a file, that would be transferred to the server
when the delegation was recalled.
This would not be serious, but could result in more than one openowner.
Since the Amazon/EFS does not issue delegations, this probably never
occurs in practice.
Spotted during code inspection.
This small patch fixes the code so that it checks for "oneopenown"
when doing client local opens on a delegation.
MFC after: 2 weeks
During a recent NFSv4 testing event a test server caused a hang
where "umount -N" failed. The renew thread was sleeping on "nfsv4lck"
and the "umount" was sleeping, waiting for the renew thread to
terminate.
This is the second of two patches that is hoped to fix the renew thread
so that it will terminate when "umount -N" is done on the mount.
This patch adds a 5second timeout on the msleep()s and checks for
the forced dismount flag so that the renew thread will
wake up and see the forced dismount flag. Normally a wakeup()
will occur in less than 5seconds, but if a premature return from
msleep() does occur, it will simply loop around and msleep() again.
The patch also adds the "mp" argument to nfsv4_lock() so that it
will return when the forced dismount flag is set.
While here, replace the nfsmsleep() wrapper that was used for portability
with the actual msleep() call.
MFC after: 2 weeks
kevans actually caught this in the original review and I fixed it, but
then I committed an older copy of the branch. Whoops.
Reported by: kevans
MFC after: 13 days
MFC with: 929acdb19a
Differential Revision: https://reviews.freebsd.org/D29031
During a recent NFSv4 testing event a test server caused a hang
where "umount -N" failed. The renew thread was sleeping on "nfsv4lck"
and the "umount" was sleeping, waiting for the renew thread to
terminate.
This is the first of two patches that is hoped to fix the renew thread
so that it will terminate when "umount -N" is done on the mount.
nfsv4_lock() checks for forced dismount, but only after it wakes up
from msleep(). Without this patch, a wakeup() call was required.
This patch adds a 1second timeout on the msleep(), so that it will
wake up and see the forced dismount flag. Normally a wakeup()
will occur in less than 1second, but if a premature return from
msleep() does occur, it will simply loop around and msleep() again.
While here, replace the nfsmsleep() wrapper that was used for portability
with the actual msleep() call and make the same change for nfsv4_getref().
MFC after: 2 weeks
1) F_SETLKW (blocking) operations would be sent to the FUSE server as
F_SETLK (non-blocking).
2) Release operations, F_SETLK with lk_type = F_UNLCK, would simply
return EINVAL.
PR: 253500
Reported by: John Millikin <jmillikin@gmail.com>
MFC after: 2 weeks
During a recent NFSv4 testing event a test server was replying
NFSERR_OLDSTATEID for layout stateids presented to the server
for LayoutReturn operations. Upon rereading RFC5661, it was
apparent that the FreeBSD NFSv4.1/4.2 pNFS client did not
maintain the seqid field of the layout stateid correctly.
This patch is believed to correct the problem. Tested against
a FreeBSD pNFS server with diagnostics added to check the stateid's
seqid did not indicate problems. Unfortunately, testing aginst
this server will not happen in the near future, so the fix may
not be correct yet.
MFC after: 2 weeks
