* Enforce option interface can only be used before the archive is opened
* Correctly handle large skips on platforms with 32-bit off_t
* Use int64_t instead of off_t
Fix some wrong usages.
Note: this does not affect generated binaries as this argument is not used.
PR: 137213
Submitted by: Eygene Ryabinkin (initial version)
MFC after: 1 month
The TTY line name should always be set for DEAD_PROCESS entries right
now. When we parse a clean utmp entry, we don't want to interpret it as
a DEAD_PROCESS entry if the TTY has never been used yet.
- Only set the fields in the ulog_utmpx structure that are valid for the
command in question. This means that strings like "shutdown" or "~"
are not visible to the user anymore.
- Rename UTXF_* to UTXI_*, indicating the indexation, instead of using
the `antique' filename. If we ever get rid of utmp, it makes little
sense calling it by its old name.
An older version of the code used a structure on the stack, instead of a
pointer to the structure. It looks like I didn't adjust the parameters
of the write(2) call, causing the first four/eight bytes of the entry to
be corrupted, instead of writing the entire entry to disk.
This brings hwpmc(4) support for 2nd and 3rd generation XScale cores.
Right now it's enabled by default to make sure we test this a bit.
When the time comes it can be disabled by default.
Tested on Gateworks boards.
A man page is coming.
Obtained from: //depot/user/rpaulo/xscalepmc/...
support to bzip2fs. This fixes problems with loading compressed amd64
kernel modules containing debug symbols.
Submitted by: David Naylor naylor.b.david (gmail)
MFC after: 1 week
The race condition is believed to be in UMTX_OP_MUTEX_WAKE. On ia64,
we simply go to the kernel to unlock.
The big question is why this is only a race condition on ia64...
MFC after: 3 days
used within FreeBSD base system only, and discourage user applications
from using it. User applications should use the expat version from the
ports/package collection.
Reviewed by: simon (earlier version)
MFC after: 2 weeks
The information used by the "Last login:"-line is obtained by using
ulog_setutxfile(3) to switch to the lastlog database. Login and logout
are performed using the utility functions ulog_login(3) and
ulog_logout(3).
This also means we must build libulog during bootstrap.
Approved by: des
1) Avoid an infinite loop in the header resync for certain malformed
archives.
2) Don't try to match hardlinks if the nlinks count is < 2. This
reduces the likelihood of a false hardlink match due to ino truncation.
MFC after: 7 days
Because several applications in /bin use libulog (or may use it in the
nearby future), it must not live inside /usr. It seems like we don't
need to add the copy from /usr/lib to ObsoleteFiles.inc, because it's
cleaned up during installation of libulog automatically.
Reported by: ume
of setenv(), putenv() and unsetenv() when dealing with corrupt entries in
environ. They now output a warning and complete their task without error.
MFC after: 1 week
instead of returning an error if a corrupt (not a "name=value" string) entry
in the environ array is detected when (re)-building the internal
environment. This should prevent applications or libraries from
experiencing issues arising from the expectation that these calls will
complete even with corrupt entries. The behavior is now as it was prior to
7.0.
Reviewed by: jilles
MFC after: 1 week
find a variable. Include a note that it must not cause the internal
environment to be generated since malloc() depends upon getenv(). To call
malloc() would create a circular dependency.
Recommended by: green
Approved by: jilles
MFC after: 1 week
The ulog_login_pseudo(3) and ulog_logout_pseudo(3) interfaces provide a
functionality identical to what libutempter has to offer. Just transform
libutempter's calls into the before mentioned functions.
libutempter doesn't work with utmpx, so instead of fixing I thought the
easiest way would be to integrate this functionality. libutempter is
used by applications like xterm and the KDE libraries, so if I ever
change the underlying file format, these applications will keep working
automatically.
Also increase __FreeBSD_version to indicate the addition (as well as the
import of libulog).
- Just like struct utmp, store strings inside struct utmpx itself. This
is needed to make things like pututxline() work.
- Add ut_id and ut_pid fields, even though they have little use in our
implementation.
- It turns out our "reboot" wtmp entries indicate a system boot, so
remove REBOOT_TIME
- Implement getutxline() and pututxline
- Add getutxuser() and setutxfile(), which allows us to crawl wtmp and
lastlog files as well.
- Add _ULOG_POSIX_NAMES, so we can already use the POSIX names if we
really want to.
The maximum length of a username has nothing to do with the size of the
username in the utmp files. Use MAXLOGNAME, which is defined as 17
(UT_USERSIZE + 1).
The entries in the argv array are not const themselves, but sometimes we
want to fill in const values. Just make the array const and use
__DECONST() to make it const for the execve()-call itself.
Also convert the only K&R prototype to ANSI.
Reviewed by: carvay,
the.infamous.paul@gmail.com,
Joan Picanyol i Puig <lists-freebsd-es@biaix.org>,
Ing . Marcos Luis Ortiz Valmaseda <mlortiz@uci.cu>,
eskanete@gmail.com,
Jose M Rodriguez <josemi@freebsd.jazztel.es>,
Guillermo Hernandez <guillermo@QuerySoft.es>,
dani.doni@gmail.com
One of the things I really want to do, is to get rid of the limitations
of our current utmp(5) mechanism:
- It only allows 8 byte TTY device names.
- The hostname only allows 16 bytes of storage.
I'm not a big fan of <utmpx.h>, but I think we should at least try to
add parts of it. Unfortunately we cannot implement <utmpx.h>, because we
miss various fields, such as ut_id, ut_pid, etc. The API provided by
libulog shares some similarities with <utmpx.h>, so it shouldn't be too
hard to port these applications eventually. In most simple cases, it
should just be a matter of removing the ulog_ prefix everywhere.
As a bonus, it also implements a function called ulog_login_pseudo(),
which allows unprivileged applications to write log entries, provided
they have a valid file descriptor to a pseudo-terminal master device.
libulog will allow a smoother transition to a new file format by adding
a library interface to deal with utmp/wtmp/lastlog files. I initially
thought about adding the functionality to libutil, but because I'm not
planning on keeping this library around forever, we'd better keep it
separated.
Next items on the todo list:
1. Port applications in the base system (and ports) to libulog, instead
of letting them use <utmp.h>.
2. Remove <utmp.h>, implement <utmpx.h> and reimplement this library on
top.
3. Port as many applications as possible back to <utmpx.h>.
long instead of an int when examining the results of select() to look for
RPC requests. Previously this routine would ignore RPC requests to sockets
whose file descriptor mod 64 was greater than 31 on a 64-bit platform.
PR: amd64/141130
Submitted by: liujb of array networks
MFC after: 3 days
Scrt1.o instead of crt1.o, since the later is built as non-PIC.
Separate i386-elf crt1.c into the pure assembler part and C code,
supplying all data extracted by assembler stub as explicit parameters [1].
Hide and localize _start1 symbol used as an interface between asm and
C code.
In collaboration with: kan
Inspired by: PR i386/127387 [1]
Prodded and tested by: rdivacky [1]
MFC after: 3 weeks
There are several reasons why it didn't work:
- It was missing <sys/cdefs.h> for __BEGIN_DECLS.
- It uses various primitive types that were not declared.
copied from NetBSD's manpage, and it also matches the behavior
described by the Open Group's online copy of setpgid.2 at
http://www.opengroup.org/onlinepubs/009695399/functions/setpgid.html
Obtained from: NetBSD
Submitted by: Petros Barbayiannis <petrosbarbayiannis@yahoo.gr>
MFC after: 1 week
**environ entries. This puts non-getenv(3) operations in line with
getenv(3) in that bad environ entries do not cause all operations to
fail. There is still some inconsistency in that getenv(3) in the
absence of any environment-modifying operation does not emit corrupt
environ entry warnings.
I also fixed another inconsistency in getenv(3) where updating the
global environ pointer would not be reflected in the return values.
It would have taken an intermediary setenv(3)/putenv(3)/unsetenv(3)
in order to see the change.
related to DNSSEC validation on a resolving name server that allows
access to untrusted users. If your system does not fall into all 3 of
these categories you do not need to update immediately.
execvPe() is called by _execvpe(), which we added to implement
posix_spawnp(). We just took execvP() and added the envp argument.
Unfortunately we forgot to change the implementation to use envp over
environ.
This fixes the following piece of code:
| char * const arg[2] = { "env", NULL };
| char * const env[2] = { "FOO=BAR", NULL };
| posix_spawnp(NULL, "/usr/bin/env", NULL, NULL, arg, env);
MFC after: 2 weeks
FTS_NOCHDIR option is used. fts_build() could strip a trailing slash
from path name in post-order visit if a path pointing to an empty
directory was given for fts_open().
PR: bin/133907, kern/134513
Reviewed by: das
Approved by: trasz (mentor)
MFC after: 1 month
from SUSv4 XSI. Note that the functions are obsoleted, and only
provided to ease porting from System V-like systems. Since sigpause
already exists in compat with different interface, XSI sigpause is
named xsi_sigpause.
Reviewed by: davidxu
MFC after: 3 weeks
and moving the default initialization of prec into the else clause.
The clang static analyzer erroneously thought that nsec can be used
uninitialized here; it was not actually possible, but better to make
the code clearer. (Clang can't know that sprintf() won't modify *pi
behind the scenes.)
uninitialized. Initialize it to a safe value so that there's no
chance of returning an error if stack garbage happens to be equal to
(size_t)-1 or (size_t)-2.
Found by: Clang static analyzer
MFC after: 7 days
a feature that libstdc++ depends on to simulate the behavior of libc's
internal '__isthreaded' variable. One benefit of this is that _libc_once()
is now private to _once_stub.c.
Requested by: kan
with the additional property that it is safe for routines in libc to use
in both single-threaded and multi-threaded processes. Multi-threaded
processes use the pthread_once() implementation from the threading library
while single-threaded processes use a simplified "stub" version internal
to libc. The libc stub-version of pthread_once() now also uses the
simplified "stub" version as well instead of being a nop.
Reviewed by: deischen, Matthew Fleming @ Isilon
Suggested by: alc
MFC after: 1 week
- fix a transfer cancelling bug/segfault [1]
- correct a return code in the transfer cancel function.
- add new API function, libusb20_tr_bulk_intr_sync().
Submitted by: HPS
Reported by: Robert Jenssen [1]
- fix a memory leak on the USB backend
- fix invalid pointer computations (in one case memory outside the allocated
area was written in LibUSB v1.0)
- make sure memory is always initialised, also in failing cases
- add missing functions from v1.0.4
PR: usb/140325
Reported by: Robert Jenssen
Submitted by: Hans Petter Selasky
MFC After: 3 days
Many operating systems also provide MAP_ANONYMOUS. It's not hard to
support this ourselves, we'd better add it to make it more likely for
applications to work out of the box.
Reviewed by: alc (mman.h)
well-known race condition, which elimination was the reason for the
function appearance in first place. If sigmask supplied as argument to
pselect() enables a signal, the signal might be delivered before thread
called select(2), causing lost wakeup. Reimplement pselect() in kernel,
making change of sigmask and sleep atomic.
Since signal shall be delivered to the usermode, but sigmask restored,
set TDP_OLDMASK and save old mask in td_oldsigmask. The TDP_OLDMASK
should be cleared by ast() in case signal was not gelivered during
syscall execution.
Reviewed by: davidxu
Tested by: pho
MFC after: 1 month
counters. For such CPUs, use an alternate mapping of convenience
names to events supported by PMC_CLASS_IAP programmable counters.
Testing and review by: fabient
* retry various system calls on EINTR
* retry the rest after a short read (common if there is more than about 1K
of output)
* block SIGCHLD like system(3) does (note that this does not and cannot
work fully in threaded programs, they will need to be careful with wait
functions)
PR: 90580
MFC after: 1 month
one path. When the list is empty (contain only a NULL pointer), return
EINVAL instead of pretending to succeed, which will cause a NULL pointer
deference in a later fts_read() call.
Noticed by: Christoph Mallon (via rdivacky@)
MFC after: 2 weeks
- Tolerate applications that pass a NULL pointer for the buffer and
claim that the capacity of the buffer is nonzero.
- If an application passes in a non-NULL buffer pointer and claims the
buffer has zero capacity, we should free (well, realloc) it
anyway. It could have been obtained from malloc(0), so failing to
free it would be a small memory leak.
MFC After: 2 weeks
Reported by: naddy
PR: ports/138320
the type argument. This is known to fix some pthread_mutexattr_settype()
invocations, especially when it comes to pulseaudio.
Approved by: kib
deischen (threads)
MFC after: 3 days
- F_READAHEAD: specify the amount for sequential access. The amount is
specified in bytes and is rounded up to nearest block size.
- F_RDAHEAD: Darwin compatible version that use 128KB as the sequential
access size.
A third argument of zero disables the read-ahead behavior.
Please note that the read-ahead amount is also constrainted by sysctl
variable, vfs.read_max, which may need to be raised in order to better
utilize this feature.
Thanks Igor Sysoev for proposing the feature and submitting the original
version, and kib@ for his valuable comments.
Submitted by: Igor Sysoev <is rambler-co ru>
Reviewed by: kib@
MFC after: 1 month
a large page size that is greater than malloc(3)'s default chunk size but
less than or equal to 4 MB, then increase the chunk size to match the large
page size.
Most often, using a chunk size that is less than the large page size is not
a problem. However, consider a long-running application that allocates and
frees significant amounts of memory. In particular, it frees enough memory
at times that some of that memory is munmap()ed. Up until the first
munmap(), a 1MB chunk size is just fine; it's not a problem for the virtual
memory system. Two adjacent 1MB chunks that are aligned on a 2MB boundary
will be promoted automatically to a superpage even though they were
allocated at different times. The trouble begins with the munmap(),
releasing a 1MB chunk will trigger the demotion of the containing superpage,
leaving behind a half-used 2MB reservation. Now comes the real problem.
Unfortunately, when the application needs to allocate more memory, and it
recycles the previously munmap()ed address range, the implementation of
mmap() won't be able to reuse the reservation. Basically, the coalescing
rules in the virtual memory system don't allow this new range to combine
with its neighbor. The effect being that superpage promotion will not
reoccur for this range of addresses until both 1MB chunks are freed at some
point in the future.
Reviewed by: jasone
MFC after: 3 weeks
query umtx also if the shared waiters bit is set on a shared lock.
The writer starvation avoidance technique, infact, can lead to shared
waiters on a shared lock which can bring to a missed wakeup and thus
to a deadlock if the right bit is not checked (a notable case is the
writers counterpart to be handled through expired timeouts).
Fix that by checking for the shared waiters bit also when unlocking the
shared locks.
That bug was causing a reported MySQL deadlock.
Many thanks go to Nick Esborn and his employer DesertNet which provided
time and machines to identify and fix this issue.
PR: thread/135673
Reported by: Nick Esborn <nick at desert dot net>
Tested by: Nick Esborn <nick at desert dot net>
Reviewed by: jeff
needed to satisfy static libraries that are compiled with -fpic
and linked into static binary afterwards. Several libraries in
gcc are examples of such static libs.
EV_RECEIPT is useful to disambiguating error conditions when multiple
events structures are passed to kevent(2). The error code is returned
in the data field and EV_ERROR is set.
Approved by: rwatson (co-mentor)
When the EV_DISPATCH flag is used the event source will be disabled
immediately after the delivery of an event. This is similar to the
EV_ONESHOT flag but it doesn't delete the event.
Approved by: rwatson (co-mentor)
Add user events support to kernel events which are not associated with any
kernel mechanism but are triggered by user level code. This is useful for
adding user level events to an event handler that may also be monitoring
kernel events.
Approved by: rwatson (co-mentor)
An additional one coming from http://www.research.att.com/~gsf/testregex/
was not added; at some point the entire AT&T regression test harness
should be imported here.
But that would also mean commitment to fix the uncovered errors.
PR: 130504
Submitted by: Chris Kuklewicz
API, keeping backward compatibility.
First consumer for this functionality is going to become forthcoming MPD-5.4,
supporting CoA and DR of RFC 3576: Dynamic Authorization Extensions to RADIUS.
MFC after: 1 month
- Add vesa kernel options for amd64.
- Connect libvgl library and splash kernel modules to amd64 build.
- Connect manual page dpms(4) to amd64 build.
- Remove old vesa/dpms files.
Submitted by: paradox <ddkprog yahoo com> [1], swell k at gmail.com
(with some minor tweaks)
in a seperate array. As such we need to use kvm_read rather than bcopy
to populate the ki_groups field.
This fixes a crash when running ps -ax on a coredump.
Reported by: brucec
Tested by: brucec
MFC after: 3 days
(incorrect handling of zero-length reads before the copy buffer is
allocated) is masked by the iso9660 taster. Tar and cpio both enable
that taster so were protected from the bug; unzip is susceptible.
This both fixes the bug and updates the test harness to exercise
this case.
Submitted by: Ed Schouten diagnosed the bug and drafted a patch
MFC after: 7 days
on iso9660 images were returned. While I'm poking around, update
some comments around this area to try to clarify what's going on and
what still remains to be improved.
When I wrote the pseudo-terminal driver for the MPSAFE TTY code, Robert
Watson and I agreed the best way to implement this, would be to let
posix_openpt() create a pseudo-terminal with proper permissions in place
and let grantpt() and unlockpt() be no-ops.
This isn't valid behaviour when looking at the spec. Because I thought
it was an elegant solution, I filed a bug report at the Austin Group
about this. In their last teleconference, they agreed on this subject.
This means that future revisions of POSIX may allow grantpt() and
unlockpt() to be no-ops if an open() on /dev/ptmx (if the implementation
has such a device) and posix_openpt() already do the right thing.
I'd rather put this in the manpage, because simply mentioning we don't
comply to any standard makes it look worse than it is. Right now we
don't, but at least we took care of it.
Approved by: re (kib)
MFC after: 3 days
value the kernel calculated directly as we already read it
with struct vnet. This will make kvm_vnet.c more resilent
in case of possible kernel changes.
Reviewed by: rwatson
Approved by: re (kib)
vnet.h, we now use jails (rather than vimages) as the abstraction
for virtualization management, and what remained was specific to
virtual network stacks. Minor cleanups are done in the process,
and comments updated to reflect these changes.
Reviewed by: bz
Approved by: re (vimage blanket)
but returned them incorrectly, causing tar to actually
erase the resulting file while trying to restore the
link. This one-line fix corrects the hardlink descriptions
to avoid this problem.
Thanks to Jung-uk Kim for pointing this out.
Approved by: re (kib)
restrictions) were found to be inadequately described by a boolean.
Define a new parameter type with three values (disable, new, inherit)
to handle these and future cases.
Approved by: re (kib), bz (mentor)
Discussed with: rwatson
in up to 16 (KI_NGROUPS) values and steal a bit from ki_cr_flags
(all bits currently unused) to indicate overflow with the new flag
KI_CRF_GRP_OVERFLOW.
This fixes procstat -s.
Approved by: re (kib)
without VIMAGE virtualization in the kernel.
If we cannot resolve a symbol try to see if we can find it with
prefix of the virtualized subsystem, currently only "vnet_entry"
by identifying either the vnet of the current process for a
live system or the vnet of proc0 (or of dumptid if compiled
in a non-default way).
The way this is done currently allows us to only touch libkvm
but no single application. Once we are going to virtualize more
subsystems we will have to review this decision for better scaling.
Submitted by: rwatson (initial version of kvm_vnet.c, lots of ideas)
Reviewed by: rwatson
Approved by: re (kib)
other than the current system-wide size (32-bits) has been updated so
for now just cautiously turn the check off. While here fix the check
for IDs being too large which doesn't work due to type mis-matches.
Reviewed by: jhb (previous version)
Approved by: re (kib)
MFC after: 1 month (type mis-match fixes only)
preparation for 8.0-RELEASE. Add the previous version of those
libraries to ObsoleteFiles.inc and bump __FreeBSD_Version.
Reviewed by: kib
Approved by: re (rwatson)
structs had incorrect member offsets, limiting dtrace's usefulness
when working with them. An example of incorrect info (struct
rtentry) from before this fix:
<1738> STRUCT rtentry (200 bytes)
rt_nodes type=1731 off=0
rt_gateway type=849 off=65280 <== WRONG, should be 8 * 96
rt_flags type=3 off=65344 <== wrong again, and so on..
...
Approved by: re (kib), gnn (mentor)
MFC after: 2 weeks
compiled with stack protector.
Use libssp_nonshared library to pull __stack_chk_fail_local symbol into
each library that needs it instead of pulling it from libc. GCC
generates local calls to this function which result in absolute
relocations put into position-independent code segment, making dynamic
loader do extra work every time given shared library is being relocated
and making affected text pages non-shareable.
Reviewed by: kib
Approved by: re (kib)
behavior is mandated by POSIX.
- Do not fail requests that pass a length greater than SSIZE_MAX
(such as > 2GB on 32-bit platforms). The 'len' parameter is actually
an unsigned 'size_t' so negative values don't really make sense.
Submitted by: Alexander Best alexbestms at math.uni-muenster.de
Reviewed by: alc
Approved by: re (kib)
MFC after: 1 week
Right now nmemb is returned when size is 0. In newer versions of the
standards, it is explicitly required that fwrite() should return 0.
Submitted by: Christoph Mallon
Approved by: re (kib)
- Fix possible uninitialised variables and null derefs
- Support big transfers
- Various bug fixes and style changes
Submitted by: Sylvestre Gallon
Sponsored by: Google Summer of Code 2009
Approved by: re (kib)
modularize it so that new transports can be created.
Add a transport for SATA
Add a periph+protocol layer for ATA
Add a driver for AHCI-compliant hardware.
Add a maxio field to CAM so that drivers can advertise their max
I/O capability. Modify various drivers so that they are insulated
from the value of MAXPHYS.
The new ATA/SATA code supports AHCI-compliant hardware, and will override
the classic ATA driver if it is loaded as a module at boot time or compiled
into the kernel. The stack now support NCQ (tagged queueing) for increased
performance on modern SATA drives. It also supports port multipliers.
ATA drives are accessed via 'ada' device nodes. ATAPI drives are
accessed via 'cd' device nodes. They can all be enumerated and manipulated
via camcontrol, just like SCSI drives. SCSI commands are not translated to
their ATA equivalents; ATA native commands are used throughout the entire
stack, including camcontrol. See the camcontrol manpage for further
details. Testing this code may require that you update your fstab, and
possibly modify your BIOS to enable AHCI functionality, if available.
This code is very experimental at the moment. The userland ABI/API has
changed, so applications will need to be recompiled. It may change
further in the near future. The 'ada' device name may also change as
more infrastructure is completed in this project. The goal is to
eventually put all CAM busses and devices until newbus, allowing for
interesting topology and management options.
Few functional changes will be seen with existing SCSI/SAS/FC drivers,
though the userland ABI has still changed. In the future, transports
specific modules for SAS and FC may appear in order to better support
the topologies and capabilities of these technologies.
The modularization of CAM and the addition of the ATA/SATA modules is
meant to break CAM out of the mold of being specific to SCSI, letting it
grow to be a framework for arbitrary transports and protocols. It also
allows drivers to be written to support discrete hardware without
jeopardizing the stability of non-related hardware. While only an AHCI
driver is provided now, a Silicon Image driver is also in the works.
Drivers for ICH1-4, ICH5-6, PIIX, classic IDE, and any other hardware
is possible and encouraged. Help with new transports is also encouraged.
Submitted by: scottl, mav
Approved by: re
if the new file mode is the same as it was before; however, this
optimization must be disabled for filesystems that support NFSv4 ACLs.
Chmod uses pathconf(2) to determine whether this is the case - however,
pathconf(2) always follows symbolic links, while the 'chmod -h' doesn't.
This change adds lpathconf(3) to make it possible to solve that problem
in a clean way.
Reviewed by: rwatson (earlier version)
Approved by: re (kib)
The most notable is that it is not bumped in rwlock_rdlock_common() when
the hard path (__thr_rwlock_rdlock()) returns successfully.
This can lead to deadlocks in libthr when rwlocks recursion in read mode
happens.
Fix the interested parts by correctly handling rdlock_count.
PR: threads/136345
Reported by: rink
Tested by: rink
Reviewed by: jeff
Approved by: re (kib)
MFC: 2 weeks
