The new behaviour is on by default, and can be disabled by setting the
net.inet.tcp.rfc3465 sysctl to 0 to obtain previous behaviour.
The patch changes struct tcpcb in sys/netinet/tcp_var.h which breaks
the ABI. Bump __FreeBSD_version to 800061 accordingly. User space tools
that rely on the size of struct tcpcb (e.g. sockstat) need to be recompiled.
Reviewed by: rpaulo, gnn
Approved by: gnn, kmacy (mentors)
Sponsored by: FreeBSD Foundation
read with libkvm) to the addresses of a prison, when inside a
jail. [1]
As the patch from the PR was pre-'new-arp', add checks to the
llt_dump handlers as well.
While touching RTM_GET in route_output(), consistently use
curthread credentials rather than the creds from the socket
there. [2]
PR: kern/68189
Submitted by: Mark Delany <sxcg2-fuwxj@qmda.emu.st> [1]
Discussed with: rwatson [2]
Reviewed by: rwatson
MFC after: 4 weeks
applications to specify a non-local IP address when bind()'ing a socket
to a local endpoint.
This allows applications to spoof the client IP address of connections
if (obviously!) they somehow are able to receive the traffic normally
destined to said clients.
This patch doesn't include any changes to ipfw or the bridging code to
redirect the client traffic through the PCB checks so TCP gets a shot
at it. The normal behaviour is that packets with a non-local destination
IP address are not handled locally. This can be dealth with some IPFW hackery;
modifications to IPFW to make this less hacky will occur in subsequent
commmits.
Thanks to Julian Elischer and others at Ironport. This work was approved
and donated before Cisco acquired them.
Obtained from: Julian Elischer and others
MFC after: 2 weeks
jail-aware. Up to now we returned the first address of the interface
for SIOCGIFADDR w/o an ifr_addr in the query. This caused problems for
programs querying for an address but running inside a jail, as the
address returned usually did not belong to the jail.
Like for v6, if there was an ifr_addr given on v4, you could probe
for more addresses on the interfaces that you were not allowed to see
from inside a jail. Return an error (EADDRNOTAVAIL) in that case
now unless the address is on the given interface and valid for the
jail.
PR: kern/114325
Reviewed by: rwatson
MFC after: 4 weeks
the KASSERT and checks suggested.
Reviewed by: The udp tunneling was discussed on net@ under the
thread entitled "Heads up -- Thinking about UDP and tunneling"
disabled entirely, which is its default state before set to a
non-zero value.
PR: 128790
Submitted by: Nick Hilliard <nick at foobar dot org>
MFC after: 3 weeks
to ip_output(). The destionation is represented in a sockaddr{} object
that may contain other pieces of information, e.g., port number. This
same destination sockaddr{} object may be passed into L2 code, which
could be used to create a L2 entry. Since there exists a L2 table per
address family, the L2 lookup function can make address family specific
comparison instead of the generic bcmp() operation over the entire
sockaddr{} structure.
Note in the IPv6 case the sin6_scope_id is not compared because the
address is currently stored in the embedded form inside the kernel.
The in6_lltable_lookup() has to account for the scope-id if this
storage format were to change in the future.
1. The "route" command allows route insertion through the interface-direct
option "-iface". During if_attach(), an sockaddr_dl{} entry is created
for the interface and is part of the interface address list. This
sockaddr_dl{} entry describes the interface in detail. The "route"
command selects this entry as the "gateway" object when the "-iface"
option is present. The "arp" and "ndp" commands also interact with the
kernel through the routing socket when adding and removing static L2
entries. The static L2 information is also provided through the
"gateway" object with an AF_LINK family type, similar to what is
provided by the "route" command. In order to differentiate between
these two types of operations, a RTF_LLDATA flag is introduced. This
flag is set by the "arp" and "ndp" commands when issuing the add and
delete commands. This flag is also set in each L2 entry returned by the
kernel. The "arp" and "ndp" command follows a convention where a RTM_GET
is issued first followed by a RTM_ADD/DELETE. This RTM_GET request fills
in the fields for a "rtm" object, which is reinjected into the kernel by
a subsequent RTM_ADD/DELETE command. The entry returend from RTM_GET
is a prefix route, so the RTF_LLDATA flag must be specified when issuing
the RTM_ADD/DELETE messages.
2. Enforce the convention that NET_RT_FLAGS with a 0 w_arg is the
specification for retrieving L2 information. Also optimized the
code logic.
Reviewed by: julian
had been the only flag with random usage patterns.
Switch inc_flags to be used as a real bit field by using
INC_ISIPV6 with bitops to check for the 'isipv6' condition.
While here fix a place or two where in case of v4 inc_flags
were not properly initialized before.[1]
Found by: rwatson during review [1]
Discussed with: rwatson
Reviewed by: rwatson
MFC after: 4 weeks
the inpcb names rather than the following IPv6 compat macros:
in6pcb,in6p_sp, in6p_ip6_nxt,in6p_flowinfo,in6p_vflag,
in6p_flags,in6p_socket,in6p_lport,in6p_fport,in6p_ppcb and
sotoin6pcb().
Apart from removing duplicate code in netipsec, this is a pure
whitespace, not a functional change.
Discussed with: rwatson
Reviewed by: rwatson (version before review requested changes)
MFC after: 4 weeks (set the timer and see then)
1. separating L2 tables (ARP, NDP) from the L3 routing tables
2. removing as much locking dependencies among these layers as
possible to allow for some parallelism in the search operations
3. simplify the logic in the routing code,
The most notable end result is the obsolescent of the route
cloning (RTF_CLONING) concept, which translated into code reduction
in both IPv4 ARP and IPv6 NDP related modules, and size reduction in
struct rtentry{}. The change in design obsoletes the semantics of
RTF_CLONING, RTF_WASCLONE and RTF_LLINFO routing flags. The userland
applications such as "arp" and "ndp" have been modified to reflect
those changes. The output from "netstat -r" shows only the routing
entries.
Quite a few developers have contributed to this project in the
past: Glebius Smirnoff, Luigi Rizzo, Alessandro Cerri, and
Andre Oppermann. And most recently:
- Kip Macy revised the locking code completely, thus completing
the last piece of the puzzle, Kip has also been conducting
active functional testing
- Sam Leffler has helped me improving/refactoring the code, and
provided valuable reviews
- Julian Elischer setup the perforce tree for me and has helped
me maintaining that branch before the svn conversion
to keep for 7-STABLE when MFCing in_pcbladdr() to not change the
behaviour there.
With this a destination route via a loopback interface is treated as
a valid and reachable thing for IPv4 source address selection, even
though nothing of that network is ever directly reachable, but it is
more like a blackhole route.
With this the source address will be selected and IPsec can grab the
packets before we would discard them at a later point, encapsulate them
and send them out from a different tunnel endpoint IP.
Discussed on: net
Reported by: Frank Behrens <frank@harz.behrens.de>
Tested by: Frank Behrens <frank@harz.behrens.de>
MFC after: 4 weeks (just so that I get the mail)
but formerly missed under VIMAGE_GLOBAL.
Put the extern declarations of the virtualized globals
under VIMAGE_GLOBAL as the globals themsevles are already.
This will help by the time when we are going to remove the globals
entirely.
Sponsored by: The FreeBSD Foundation
missed under VIMAGE_GLOBAL.
Start putting the extern declarations of the virtualized globals
under VIMAGE_GLOBAL as the globals themsevles are already.
This will help by the time when we are going to remove the globals
entirely.
While there garbage collect a few dead externs from ip6_var.h.
Sponsored by: The FreeBSD Foundation
container structures, depending on VIMAGE_GLOBALS compile time option.
Make VIMAGE_GLOBALS a new compile-time option, which by default will not
be defined, resulting in instatiations of global variables selected for
V_irtualization (enclosed in #ifdef VIMAGE_GLOBALS blocks) to be
effectively compiled out. Instantiate new global container structures
to hold V_irtualized variables: vnet_net_0, vnet_inet_0, vnet_inet6_0,
vnet_ipsec_0, vnet_netgraph_0, and vnet_gif_0.
Update the VSYM() macro so that depending on VIMAGE_GLOBALS the V_
macros resolve either to the original globals, or to fields inside
container structures, i.e. effectively
#ifdef VIMAGE_GLOBALS
#define V_rt_tables rt_tables
#else
#define V_rt_tables vnet_net_0._rt_tables
#endif
Update SYSCTL_V_*() macros to operate either on globals or on fields
inside container structs.
Extend the internal kldsym() lookups with the ability to resolve
selected fields inside the virtualization container structs. This
applies only to the fields which are explicitly registered for kldsym()
visibility via VNET_MOD_DECLARE() and vnet_mod_register(), currently
this is done only in sys/net/if.c.
Fix a few broken instances of MODULE_GLOBAL() macro use in SCTP code,
and modify the MODULE_GLOBAL() macro to resolve to V_ macros, which in
turn result in proper code being generated depending on VIMAGE_GLOBALS.
De-virtualize local static variables in sys/contrib/pf/net/pf_subr.c
which were prematurely V_irtualized by automated V_ prepending scripts
during earlier merging steps. PF virtualization will be done
separately, most probably after next PF import.
Convert a few variable initializations at instantiation to
initialization in init functions, most notably in ipfw. Also convert
TUNABLE_INT() initializers for V_ variables to TUNABLE_FETCH_INT() in
initializer functions.
Discussed at: devsummit Strassburg
Reviewed by: bz, julian
Approved by: julian (mentor)
Obtained from: //depot/projects/vimage-commit2/...
X-MFC after: never
Sponsored by: NLnet Foundation, The FreeBSD Foundation
