--Remove special-case handling of sparc64 bus_dmamap* functions.
Replace with a more generic mechanism that allows MD busdma
implementations to generate inline mapping functions by
defining WANT_INLINE_DMAMAP in <machine/bus_dma.h>. This
is currently useful for sparc64, x86, and arm64, which all
implement non-load dmamap operations as simple wrappers
around map objects which may be bus- or device-specific.
--Remove NULL-checked bus_dmamap macros. Implement the
equivalent NULL checks in the inlined x86 implementation.
For non-x86 platforms, these checks are a minor pessimization
as those platforms do not currently allow NULL maps. NULL
maps were originally allowed on arm64, which appears to have
been the motivation behind adding arm[64]-specific barriers
to bus_dma.h, but that support was removed in r299463.
--Simplify the internal interface used by the bus_dmamap_load*
variants and move it to bus_dma_internal.h
--Fix some drivers that directly include sys/bus_dma.h
despite the recommendations of bus_dma(9)
Reviewed by: kib (previous revision), marius
Differential Revision: https://reviews.freebsd.org/D10729
gcc produces a "variably modified X at file scope" warning for
structures that use these size definitions. I think the definitions are
actually fine but can be rephrased with the __CONST_RING_SIZE macro more
cleanly anyway.
Reviewed by: markj, royger
Approved by: markj (mentor)
Sponsored by: Dell EMC Isilon
Differential revision: https://reviews.freebsd.org/D11417
For ATIOs it is pointless to report isp_loopid to CAM, since in other
places it operates with port database record IDs, not with loop IDs.
For INOTs target_id/target_lun seems were never set, so wildcard INOTs
probably were not working correctly when LUN IDs were important.
which is able to manipulate the clock and data lines directly.
When an i2c bus is hung by a slave device stuck in the middle of a
transaction that didn't complete properly, this function manipulates the
clock and data lines in a sequence known to reliably reset slave devices.
The most common cause of a hung i2c bus is a system reboot in the middle of
an i2c transfer (so it doesnt' happen often, but now there is a way other
than power cycling to recover from it).
nostop option is set, if a start was issued.
The nostop option doesn't mean "never issue a stop" it means "only issue
a stop after the last in a series of transfers". If the transfer ends
due to error, then that was the last transfer in the series, and a stop
is required.
Before this change, any error during a transfer when nostop is set would
effectively hang the bus, because sc->started would never get cleared,
and that caused all future calls to iicbus_start() to return an error
because it looked like the bus was already active. (Unrelated errors in
handling the nostop option, to be addressed separately, could lead to
this bus hang condition even on busses that don't set the nostop option.)
the "effective MSS" for the connection. The chip expects it this way.
Submitted by: Krishnamraju Eraparaju @ Chelsio
MFC after: 3 days
Sponsored by: Chelsio Communications
Add io_mapping_init_wc() and add a third (unused) parameter to
io_mapping_map_wc().
Reviewed by: hselasky
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11286
On some windows hosts TEST_UNIT_READY command will return
SRB_STATUS_ERROR and sense data "NOT READY asc:3a,1 (Medium
not present - tray closed)", this occurs periodically, and
not hurt anything else. So, we prefer to ignore this kind
of errors.
PR: 219973
Submitted by: Hongjiang Zhang <hongzhan microsoft com>
MFC after: 3 days
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D11271
being overwritten, they are set only bits (cleared by hardware).
Disable the Acknowledge of the controller slave address. The slave mode is
not supported.
Make sure the interrupt flag bit is being cleared as recommended, add a
delay() _after_ clear the interrupt bit.
Sponsored by: Rubicon Communications, LLC (Netgate)
Clang 4.0 accepts the smc instruction with or without specifying
.arch_extension sec, but Clang 5.0 produces an error without it.
MFC after: 3 weeks
Sponsored by: The FreeBSD Foundation
This generates startup LORs and panics when adding elements to bridge
devices. I will document further in https://reviews.freebsd.org/D10681
PR: 220073
Submitted by: dchagin
Reported by: db
for the rtl8188eu chipset
- Rename struct r92c_rom member names: s/channel_plan/reserved5/,
s/xtal_calib/channel_plan to be compliant with definitions of the efuse
in vendor hal_pg.h
iflib - Handle out of order packet delivery from hardware in support of LRO
Out of order updates to rxd's is fixed in r315217. However, it is not
completely fixed. While refilling the buffers, iflib is not considering
the out of order descriptors. Hence, it is refilling sequentially.
"idx" variable in _iflib_fl_refill routine is incremented sequentially.
By doing refilling sequentially, it will override the SGEs that
are *IN USE* by other connections. Fix is to maintain a bitmap of
rx descriptors and differentiate the used one with unused one and
refill only at the unused indices. This patch also fixes a
few bugs in bnxt, related to the same feature.
Submitted by: bhargava.marreddy@broadcom.com
Reviewed by: shurd@
Differential Revision: https://reviews.freebsd.org/D10681
Do not attempt to initialize netmap queues that are already initialized
or aren't supposed to be initialized. Similarly, do not free queues
that are not initialized or aren't supposed to be freed.
PR: 217156
Sponsored by: Chelsio Communications
mlx4en network interfaces. This prevents infinite unit number growth
typically when the mlx4en driver is used inside virtual machines which
support runtime PCI attach and detach.
MFC after: 3 days
Sponsored by: Mellanox Technologies
The swap space backing a clean page is released when it is first dirtied,
so there's no need to attempt to release swap space when the page is
already dirty.
Reviewed by: alc
MFC after: 1 week
After such a failure, the page is invalid, so there's point in keeping it
around. Moreover, such pages were not being inserted into the active queue,
making them unreclaimable until a subsequent write or delete made them
valid.
Reported by: alc
Reviewed by: alc (previous revision)
MFC after: 1 week
Such requests would previously mark the entire page as valid, which was
incorrect since nothing guaranteed that the page's contents had been
initialized. This change also modifies subpage BIO_DELETEs so that the
entire page is marked dirty, rather than only a subrange. There is no
benefit to creating partially dirty swap pages.
Reviewed by: alc, kib (previous version)
MFC after: 3 days
When HWPMC stops sampling, ps_pmc may be freed before samples
are processed. In such situation treat PMC as stopped.
Add "ifdef" to fix build without INVARIANTS code.
Submitted by: Michal Mazur <mkm@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield, Netgate
Differential revision: https://reviews.freebsd.org/D10912
Additionally:
- Fix support for Cycle Counter (evsel == 0xFF)
- Stop and mask interrupts from all counters on init and finish
Submitted by: Michal Mazur <mkm@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield, Netgate
Differential revision: https://reviews.freebsd.org/D10910
This patch contains a new driver for the network unit of Marvell
Armada 38x/XP SoCs, called NETA. This support was thoroughly tested
and optimised in terms of stability and performance. Additional
hardware features, like Buffer Management (BM) or Parser and Classifier
(PnC) will be progressively supported as needed.
Submitted by: Fabien Thomas <fabien.thomas@stormshield.eu>
Arnaud Ysmal <arnaud.ysmal@stormshield.eu>
Zbigniew Bodek <zbb@semihalf.com>
Michal Mazur <mkm@semihalf.com>
Bartosz Szczepanek <bsz@semihalf.com>
Marcin Wojtas <mw@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield (main development)
Netgate (cleanup and upstreaming)
Differential revision: https://reviews.freebsd.org/D10706
r319886 ("Add the initial support for the Marvell 88E6141
and 88E6341 switches.") unveiled a problem with possible
multiple lock creation. Move its initialization
to the driver attach and for obtaining the switch ID
create a temprorary one, which is immediately destroyed
after the check.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Marcin Wojtas <mw@semihalf.com>
Obtained from: Semihalf
Right now the driver only supports port VLANs, so make sure
etherswitch_getinfo() return the proper switch capabilities.
Handle the cases where not all ports are in use (that will also require
etherswitch cooperation).
Sponsored by: Rubicon Communications, LLC (Netgate)
version.
This commit contains mostly refactoring, a few fixes and minor added
functionality.
Submitted by: Vincenzo Maffione <v.maffione at gmail.com>
Requested by: many
Sponsored by: Rubicon Communications, LLC (Netgate)
system retrieve its config data from the fdt data.
The properties that are common to all phys are decoded and returned in a
structure. The fdt node handles for the mac and phy devices are also
returned in the config data struct, so a driver can easily obtain additional
hardware-specific config values from the fdt data.
While the initial need for this is to help support phy drivers which are
configured with FDT data, there is nothing devicetree-specific about the
concept or the names, so they are available for use even on non-FDT systems.
The initial list of connection types comes from the current devicetree
bindings documentation, but values not documented there can be added to
the list in the future as needed, the values could be sorted into a
different order without perturbing FDT code, etc. The only invariant
is that MII_CONTYPE_UNKNOWN should be first (so it has a value of zero,
so that a con-type variable in a softc, for example, is initialized to
MII_CONTYPE_UNKNOWN by default).
