Lack of functioning link and activity LEDs on devices without an EEPROM
is expected (not a bug). Quoting the EVB-LAN7850 User's Guide:
When configured with the default internal register settings, the
Ethernet Link status LEDs are not enabled. To enable Ethernet Link
status LEDs, enable the EEPROM.
This is an artifact of the different ways in which the evaluation board
can be used. End-user USB-Ethernet adapters using the Microchip LAN78XX
or LAN7515 controllers should use an EEPROM or have OTP configuration,
if their product configuration does not match the boot default register
configuration.
Sponsored by: The FreeBSD Foundation
The size limits came from a flawed understanding of dump records.
The real issue was that dump was bogusly interpreting c_count
sometimes. r334978 fixes that.
We shouldn't count the bytes set in c_addr for TS_CLRI and TS_BITS
nodes. Those block overload c_count to communicate how many blocks
follow, not now many c_addr spaces are used. Dump would dump core
(now) because memory layout moved around and we'd access elements past
the end to make a count.
Reviewed by: kib@
lan78xx_eeprom_read just checked for EEPROM presence then called
lan78xx_eeprom_read_raw if present, and had only one caller. Introduce
lan78xx_eeprom_present to check for EEPROM presence, and use it in the
one place it is needed.
This is used by r334964, which was accidentally committed out-of-order
from my work tree.
Reported by: markj
Sponsored by: The FreeBSD Foundation
Add some asserts that prevents the overflows of c_addr. This can't
happen, absent bugs. However, certain large filesystems can cause
problems. These have been prevented by r334968, but a solution
is needed. These asserts will help assure that solution is correct.
PR: 228807
Reviewed by: db
c_addr in spcl. So check before we start dumping otherwise we can
end up with a corrupted dump.
PR: 228807
Submitted by: db
Reviewed by: imp
Approved by: imp
There were a couple of cases in newnfs_request() that it assumed that it
was an NFSv4.1 mount with a session. This should always be the case when
a Sequence operation is in the reply or the server replies NFSERR_BADSESSION.
However, if a server was broken and sent an erroneous reply, these safety
belt checks should avoid trouble.
The one check required a small tweak to nfsmnt_mdssession() so that it
returns NULL when there is no session instead of the offset of the field
in the structure (0x8 for i386).
This patch should have no effect on normal operation of the client.
Found by inspection during pNFS server development.
MFC after: 2 weeks
Differences between LAN7800 and LAN7850 from the driver's perspective:
* The LAN7800 muxes EEPROM signals with LEDs, so LED mode needs to be
disabled when reading/writing EEPROM. The EEPROM is not muxed on the
LAN7850.
* The Linux driver enables automatic duplex and speed detection when
there is no EEPROM, for the LAN7800 only. With this FreeBSD driver
LAN7850-based adapters without a configuration EEPROM fail to link
(with or without the automatic duplex and speed detection code), so
I have just followed the example of the Linux driver for now.
Sponsored by: The FreeBSD Foundation
Sponsored by: Microchip (hardware)
At the moment ctfconvert(1) does not do much with such CUs, but
that may not be true in the future, and we run ctfconvert on several
assembly files during the build.
X-MFC with: r334883
- non NULL controlp is not an error, returning EINVAL
would cause X forwarding to fail
- MSG_PEEK and MSG_WAITALL are fairly exceptional, but we still
want to handle them - punt to soreceive_generic
Fix the build of lib/libpmc and usr.sbin/pmc for gcc on amd64.
Reviewed by: mmacy
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D15723
time dependency.
At present, RACK requires the TCPHPTS option to run. However, because
modules can be moved from machine to machine, this dependency is really
best assessed at load time rather than at build time.
Reviewed by: rrs
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D15756
Casting from rman_res_t to a pointer results in "cast to pointer from
integer of different size" warnings with base gcc on i386, so print
these without casting. The kva field of struct bxe_bar is of type
vm_offset_t, which can be 32 or 64 bit, so cast it to uintmax_t before
printing.
Reviewed by: markj
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D15733
Because base gcc does not support the required intrinsics, do not
attempt to compile the aesni module with it.
Noticed by: Dan Allen <danallen46@gmail.com>
MFC after: 3 days
Base gcc fails to compile sys/dev/drm2/i915/intel_display.c for i386,
with the following -Werror warnings:
cc1: warnings being treated as errors
/usr/src/sys/dev/drm2/i915/intel_display.c:8884: warning:
initialization from incompatible pointer type
This is due to https://gcc.gnu.org/bugzilla/show_bug.cgi?id=36432, which
incorrectly interprets the [] as a flexible array member.
Because base gcc does not have a -W flag to suppress this particular
warning, it requires a rather ugly cast. To not influence any other
compiler, put it in a #if/#endif block.
Reviewed by: kib
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D15744
Add a few intermediate casts to uintptr_t to suppress "cast to pointer
from integer of different size" warnings from gcc. Also remove a few
incorrect casts.
Reviewed by: ram
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D15747
dteske@, I believe, had originally pointed out that lualoader failed to
allow logo-*.lua for new logos to be added. When correcting this mistake, I
failed to do the same for brands.
Correct the sub-mistake: creating new brands is almost identical to creating
new logos, except one must use `drawer.addBrand` and 'graphic' is the only
valid key for a branddef at the moment.
While here, I've added `drawer.default_brand` to be set to name of brand to
be used (e.g. 'fbsd', project default).
Eventually this whole goolash will be documented.
Reported by: kmoore, iXsystems
This revision adds auditability tests for stat, lstat, fstat, and fstatat,
all from the fa audit class. More tests from that audit class will follow.
Submitted by: aniketp
MFC after: 2 weeks
Sponsored by: Google, Inc. (GSoC 2018)
Differential Revision: https://reviews.freebsd.org/D15709
The Flexible File layout case wasn't handled by LayoutRecall callbacks
because it just checked for File layout and returned NFSERR_NOMATCHLAYOUT
otherwise. This patch adds the Flexible File layout handling.
Found during testing of the pNFS server.
MFC after: 2 weeks
This file has only generated a warning for the last 18 months. Its
existence at this point only serves to confuse software looking for
POSIX.1e capabilities and produce actionless warnings.
Qsort swap code aliases the sorted array elements to ints and longs in
order to do swap by machine words. Unfortunately this breaks with the
full code optimization, e.g. LTO.
See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83201 which seems to
reference code directly copied from libc/stdlib/qsort.c.
PR: 228780
Reported by: mliska@suse.cz
Reviewed by: brooks
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D15714
It's clearer now when a variable represents a toggable command line option.
Many options were stored in the parser's state structure, so fix also that.
breakpoint instruction, however this would lose information that may be
useful for debugging.
These are now handled in a similar way to other exceptions, however it
won't exit out of the exception handler until it is known if we can
handle these exceptions in a useful way.
Sponsored by: DARPA, AFRL
and also on apic in common and i386 files (except for xen it is optional
only on xenhvm), but it was not ifdefed except on apic in common and i386
files.
This is all that is left from an attempt to build a (sub-)minimal kernel
without any devices. The isa "option" is still used without ifdefs in many
standard files even on amd64. ISAPNP is not optional on at least i386.
ATPIC is not optional on i386 (it is used mainly for Xspuriousint). But
pci is now supposed to be optional on x86.
A call to npxsave() in the exception trampolines was not relocated.
This call to a garbage address usually paniced when made, but it is only
made when the thread has used an FPU recently, and this is not the usual
case.
PR: 228755
Reviewed by: kib
These ioctls are not documented and only stubbed in a few drivers: mse(4),
psm(4) and syscon's sysmouse(4). The only exception is MOUSE_GETVARS
implemented in psm(4)
Given the fact that they were introduced 20 years ago and implementation
has never been completed, remove any related code.
PR: 228718 (exp-run)
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D15726
