When not using LLVM libunwind, unwind.h is a generated header and a stale
copy may remain in the OBJDIR after enabling LLVM libunwind. Explicitly
remove it.
Reported by: bz
Reviewed by: bdrewery
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5019
The local build rule used to set -fvisibility=hidden and -fPIC, in
addition to -fexceptions and -D defines that had no effect.
With -fvisibility=hidden and -fPIC in STATIC_CXXFLAGS the standard
bsd.lib.mk rules are suitable for libgcc_s's C++ source.
PR: 206381
Sponsored by: The FreeBSD Foundation
The standard bsd.lib.mk rule is suitable for libgcc_s's C++ source.
The local rule had the following non-functional argument differences
or additions:
1. -DSHARED (rather than -DPIC from bsd.lib.mk)
The C++ sources don't have an #ifdef for either one.
2. -fexceptions
This is enabled by default for C++ so does not need to be set
explicitly.
3. -D__GLIBC__=3
Not used by LLVM libunwind.
4. -DElfW=__ElfN
LLVM libunwind provides its own definition.
PR: 206381
Differential Revision: The FreeBSD Foundation
It is built in libgcc_s.so and libgcc_eh.a to simplify transition.
It is enabled by default on arm64 (where we previously had no other
unwinder) and may be enabled for testing on other platforms by setting
WITH_LLVM_LIBUNWIND in src.conf(5).
Also add compiler-rt's __gcc_personality_v0 implementation for use with
the LLVM unwinder.
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D4787
We intend to replace GNU ld with LLVM's lld, and on the path to there
we'll experiment with having lld installed or linked as /usr/bin/ld.
Thus, make ld.bfd the primary install target for GNU ld, to later
facilitate making the ld link optional.
Reviewed by: davide, dim
Differential Revision: https://reviews.freebsd.org/D4790
This is not properly respecting WITHOUT or ARCH dependencies in target/.
Doing so requires a massive effort to rework targets/ to do so. A
better approach will be to either include the SUBDIR Makefiles directly
and map to DIRDEPS or just dynamically lookup the SUBDIR. These lose
the benefit of having a userland/lib, userland/libexec, etc, though and
results in a massive package. The current implementation of targets/ is
very unmaintainable.
Currently rescue/rescue and sys/modules are still not connected.
Sponsored by: EMC / Isilon Storage Division
Unfortunately filemon/meta mode tracks all indirect dependencies here
since ld(1) is reading libelf when linking in libkvm. Churn would be
reduced if this was able to be limited to direct dependencies.
Sponsored by: EMC / Isilon Storage Division
- Add a kvaddr_type to represent kernel virtual addresses instead of
unsigned long.
- Add a struct kvm_nlist which is a stripped down version of struct nlist
that uses kvaddr_t for n_value.
- Add a kvm_native() routine that returns true if an open kvm descriptor
is for a native kernel and memory image.
- Add a kvm_open2() function similar to kvm_openfiles(). It drops the
unused 'swapfile' argument and adds a new function pointer argument for
a symbol resolving function. Native kernels still use _fdnlist() from
libc to resolve symbols if a resolver function is not supplied, but cross
kernels require a resolver.
- Add a kvm_nlist2() function similar to kvm_nlist() except that it uses
struct kvm_nlist instead of struct nlist.
- Add a kvm_read2() function similar to kvm_read() except that it uses
kvaddr_t instead of unsigned long for the kernel virtual address.
- Add a new kvm_arch switch of routines needed by a vmcore backend.
Each backend is responsible for implementing kvm_read2() for a given
vmcore format.
- Use libelf to read headers from ELF kernels and cores (except for
powerpc cores).
- Add internal helper routines for the common page offset hash table used
by the minidump backends.
- Port all of the existing kvm backends to implement a kvm_arch switch and
to be cross-friendly by using private constants instead of ones that
vary by platform (e.g. PAGE_SIZE). Static assertions are present when
a given backend is compiled natively to ensure the private constants
match the real ones.
- Enable all of the existing vmcore backends on all platforms. This means
that libkvm on any platform should be able to perform KVA translation
and read data from a vmcore of any platform.
Tested on: amd64, i386, sparc64 (marius)
Differential Revision: https://reviews.freebsd.org/D3341
This is so that 'make depend' is not a required build step in these
files.
DPSRCS is overall unneeded. DPSRCS already contains SRCS, so anything
which can safely be in SRCS should be. DPSRCS is mostly just a way to
generate files that should not be linked into the final PROG/LIB. For
headers and grammars it is safe for them to be in SRCS since they will
be excluded during linking and installation.
The only remaining uses of DPSRCS are for generating .c or .o files that
must be built before 'make depend' can run 'mkdep' on the SRCS c files
list. A semi-proper example is in tests/sys/kern/acct/Makefile where a
checked-in .c file has an #include on a generated .c file. The
generated .c file should not be linked into the final PROG though since
it is #include'd. The more proper way here is just to build/link it in
though without DPSRCS. Another example is in sys/modules/linux/Makefile
where a shell script runs to parse a DPSRCS .o file that should not be
linked into the module. Beyond those, the need for DPSRCS is largely
unneeded, redundant, and forces 'make depend' to be ran. Generally,
these Makefiles should avoid the need for DPSRCS and define proper
dependencies for their files as well.
An example of an improper usage and why this matters is in usr.bin/netstat.
nl_defs.h was only in DPSRCS and so was not generated during 'make all',
but only during 'make depend'. The files including it lacked proper
depenencies on it, which forced running 'make depend' to workaround that
bug. The 'make depend' target should mostly be used for incremental build
help, not to produce a working build. This specific example was broken in
the meta build until r287905 since it does not run 'make depend'.
The gnu/lib/libreadline/readline case is fine since bsd.lib.mk has 'OBJS:
SRCS:M*.h' when there is no .depend file.
Sponsored by: EMC / Isilon Storage Division
MFC after: 1 week
Tracking these leads to situations where meta mode will consider the
file to be out of date if /bin/sh or /bin/ln are newer than the source
file. There's no reason for meta mode to do this as make is already
handling the rebuild dependency fine.
Sponsored by: EMC / Isilon Storage Division
This both avoids some dependencies on xinstall.host and allows
bootstrapping on older releases to work due to lack of at least 'install -l'
support.
Sponsored by: EMC / Isilon Storage Division
ld(1) uses the /usr/libdata/ldscripts when linking. These scripts add in the
default search paths of /lib and /usr/lib via 'SEARCH_DIR("DIR")'. These
need to be prefixed by '=' so that the --sysroot flag is respected. This
is not a problem with buildworld since the TOOLS_PREFIX is baked into the
cross-ld. However it is a problem when trying to use ld(1) with --sysroot
anywhere else as it ends up still reading /lib and /usr/lib despite --sysroot.
The default --sysroot (TARGET_SYSTEM_ROOT) is '/' for /usr/bin/ld.
I found this while building with META MODE with uses only --sysroot with
/usr/bin/ld, and found that libraries that I had not built in its sysroot
directory were leaking in. This didn't happen with ports binutils either. This
would also impact external compiler support.
Reviewed by: bapt, brooks
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D4262
The kernel dump does not store these values on the stack.
Use PCB structure to resolve PC and LR properly.
Submitted by: Wojciech Macek <wma@semihalf.com>
Reviewed by: jhb, kib
Obtained from: Semihalf
Sponsored by: Juniper Networks Inc.
Differential Revision: https://reviews.freebsd.org/D4013
In r204548 the 'rm -f ldscripts' was added likely due to reading the
conditional as 'else it is a file'. That seems unlikely though and
the more likely case is just that the directory hasn't been created yet.
Because this races with ,ssother scripts, use 'mkdir -p' which is a minimal
modification vs upstream to avoid the warning of 'File exists' if another
script creates it first. This could replace the 'test -d' as well but
then it's more unneeded change to the upstream script.
Sponsored by: EMC / Isilon Storage Division
netbsd-tests.test.mk (r289151)
- Eliminate explicit OBJTOP/SRCTOP setting
- Convert all ad hoc NetBSD test integration over to netbsd-tests.test.mk
- Remove unnecessary TESTSDIR setting
- Use SRCTOP where possible for clarity
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Divison
This now generates the files into the OBJDIR as needed. Some of the files
are installed directly from the src directory. Files which are generated
from the src directory are renamed to .in to generate them and avoid
colliding with the checked-in file when CURDIR=OBJDIR.
The remaining beforeinstall: handling still needs to be reworked as it does
not work well with staging for packaging.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
out of 'struct pcb' and into a variable-sized region after the
structure. The kgdb code currently only reads the pcb. It does not
read in the FPU save area but instead passes stack garbage as the
FPU's saved context. Fixing this would mean determining the proper
size of the area and fetching it. However, this state is not saved
for running CPUs in stoppcbs[], so the callback would also have to
know to ignore those pcbs. Instead, just remove the call since it is
of limited usefulness. It results in kgdb reporting the state of the
FPU/SIMD registers in userland, not their current values in the kernel.
In particular, it does not report the correct state for any code in
the kernel which does use the FPU and would report incorrect values
in that case.
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D3743
FILES is not used when LIBRARIES_ONLY is set, which is used to build and
install the lib32 sysroot. All of the csu files do quality as "libraries"
for this case so just undefine LIBRARIES_ONLY.
This is still better than the previous realinstall handling as it does
not hook into META_MODE properly.
Sponsored by: EMC / Isilon Storage Division
This partially reverts r270170 for lib/csu/i386 while retaining the
change for using bsd.lib.mk.
These FILES groups could go into lib/csu/Makefile.inc but I've kept them
in the Makefiles for clarity.
Sponsored by: EMC / Isilon Storage Division
The option was added only to ease the transition from GNU Binutils to
ELF Tool Chain tools, and that process is now complete (for the viable
replacements). Noting the removal in UPDATING is sufficient as we have
not shipped a release with the option.
Reviewed by: brooks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3240
ELF Tool Chain elfcopy is nearly a drop-in replacement for GNU objcopy,
but does not currently support PE output which is needed for building
x86 UEFI bits.
Add a src.conf knob to allow installing it as objcopy and set it by
default for aarch64 only, where we don't have a native binutils.
Reviewed by: bapt
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D2887
Rationale: ident(1) is useful out of RCS, lot of scripts are using ident(1) and
failing when base is built WITHOUT_RCS.
This version is:
- fully compatible with RCS 5.7 ident.
- fully compatible with RCS 5.9 ident.
- passes all ident test from GNU RCS 5.9 test suite
This version has support for: svn extension for the Keyword id (double colon and
# before last $)
Différences with GNU RCS ident:
- no long options as found in GNU RCS 5.9 (but not commented there).
- '-V' reports nothing but has been added for compatibility.
Differential Revision: https://reviews.freebsd.org/D3200
Reviewed by: pfg
