After 3b00222f15, it turns out that clang only supports strict
floating point semantics for SystemZ and x86 at the moment, while for
other architectures it is still experimental.
Therefore, only use -fp-exception-behavior=maytrap on x86 for now,
otherwise this option results in "error: overriding currently
unsupported use of floating point exceptions on this target
[-Werror,-Wunsupported-floating-point-opt]" on other architectures.
Fixes: 3b00222f15
PR: 254911
MFC after: 1 week
When using clang with x86_64 CPUs that support AVX, some floating point
transformations may raise exceptions that would not have been raised by
the original code. To avoid this, use the -fp-exception-behavior=maytrap
flag, introduced in clang 10.0.0.
In particular, this fixes a number of test failures with ctanhf(3) and
ctanf(3), when libm is compiled with -mavx. An unexpected FE_INVALID
exception is then raised, because clang emits vdivps instructions to
perform certain divides. (The vdivps instruction operates on multiple
single-precision float operands simultaneously, but the exceptions may
be influenced by unused parts of the XMM registers. In this particular
case, it was calculating 0 / 0, which results in FE_INVALID.)
If -fp-exception-behavior=maytrap is specified however, clang uses
vdivss instructions instead, which work on one operand, and should not
raise unexpected exceptions.
Reported by: olivier
Reviewed by: arichardson
PR: 254911
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D29686
struct pf_rule had a few counter_u64_t counters. Those couldn't be
usefully comminicated with userspace, so the fields were doubled up in
uint64_t u_* versions.
Now that we use struct pfctl_rule (i.e. a fully userspace version) we
can safely change the structure and remove this wart.
Reviewed by: glebius
MFC after: 4 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D29645
Stop using the kernel's struct pf_rule, switch to libpfctl's pfctl_rule.
Now that we use nvlists to communicate with the kernel these structures
can be fully decoupled.
Reviewed by: glebius
MFC after: 4 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D29644
Build libnv as position independent code so we can use it from shared
libraries.
MFC after: 4 weeks
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D29561
This is the same change as d36d681615, but for libc static implementaion
of dl_iterate_phdr().
Reported by: emacsray@gmail.com
PR: 254774
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D29623
When compiling parts of math.h with clang using a C standard before C11,
and using -pedantic, it will result in warnings similar to:
bug254714.c:5:11: warning: '_Generic' is a C11 extension [-Wc11-extensions]
return !isfinite(1.0);
^
/usr/include/math.h:111:21: note: expanded from macro 'isfinite'
^
/usr/include/math.h:82:39: note: expanded from macro '__fp_type_select'
^
This is because the block that enables use of _Generic is conditional
not only on C11, but also on whether the compiler advertises support for
C generic selections via __has_extension(c_generic_selections).
To work around the warning without having to pessimize the code, use the
__extension__ keyword, which is supported by both clang and gcc. While
here, remove the check for __clang__, as _Generic has been supported for
a long time by gcc too now.
Reported by: yuri
PR: 254714
MFC after: 1 week
This was only needed on 32-bit arm prior to ARMv6. As we only support
ARMv6 or later remove it.
Reviewed by: mannu
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D29624
In situations when the current file name wasn't the first element on
the list we were cleaning the current name too early.
This might cause us to pre-cache the same file twice.
dl_iterate_phdr() dlpi_tls_data should provide the TLS module segment
address, and not the TLS init segment address as it does now.
Reported by: emacsray@gmail.com
PR: 254774
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Add a new option to pam_unix(8), "emptyok", which makes it not prompt
for password, if it's set to an empty one. It is similar to "nullok",
which makes it not prompt for password if the hash itself is empty.
Reviewed By: markj
Sponsored By: NetApp, Inc.
Sponsored By: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D27569
The reset is necessary at the beginning of the function, because of
the errno logic in the error path (set errno to EINVAL if not set).
If errno is already set when calling the function, and the function
fails, the previous errno value will be inherited.
Instead of polling nleft[i] (without appropriate memory barriers!) and
using sleep() to detect the exit just call pthread_join() on all threads.
Also replace the use of a mutex that guarding the increments with atomic
fetch_add. This should reduce the runtime of this test on SMP systems.
Finally, remove all the debug printfs unless DEBUG_OUTPUT is set in
the environment.
Test Plan: still fails sometimes on qemu (but maybe less often?)
Reviewed By: jhb
Differential Revision: https://reviews.freebsd.org/D29390
The companion libnetmap changes for the "offsets" kernel support added
in a6d768d845. This includes code to parse the "@offset=NNN"
option that can be appended to the port name by any nmport_* application.
Example:
# pkt-gen -i 'netmap:em0@offset=16'
Without this patch, sh can autocomplete file names but not commands from
$PATH. Use libedit's facility to execute custom function for autocomplete,
but yield to the library's standard autocomplete function when cursor is
not at position 0.
Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D29361
POWER architecture CPUs (Book-S) require natural alignment for
cache-inhibited storage accesses. Since we can't know the caching model
for a page ahead of time, always enforce natural alignment in bcopy.
This fixes a SIGBUS when calling the function with misaligned pointers
on POWER7.
Submitted by: Bruno Larsen <bruno.larsen@eldorado.org.br>
Reviewed by: luporl, bdragon (IRC)
MFC after: 1 week
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D28776
The error cases (goto fin) of _nsdispatch were missing the unlock.
This change also drops the checks for __isthreaded since the pthread stubs
are already no-ops if threads are not being used. Dropping those conditionals
allows clang's thread safety analysis to deal with the file and also makes
the code a bit more readable. While touching the file also add a few more
assertions in debug mode that the right locks are held.
Reviewed By: markj
Differential Revision: https://reviews.freebsd.org/D29372
The man page says "The feenableexcept(), fedisableexcept(), and
fegetexcept() functions return a bitmap of the exceptions that were
unmasked prior to the call.", so we should return zero not -1.
Reviewed By: mhorne
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D29386
- Defined MAXLINE constant (8192 octets by default instead 2048) for
centralized limit setting up. It sets maximum number of characters of
the syslog message. RFC5424 doesn't limit maximum size of the message.
Named after MAXLINE in syslogd(8).
- Fixed size of fmt_cpy buffer up to MAXLINE for rendering formatted
(%m) messages.
- Introduced autoexpansion of sending socket buffer up to MAXLINE.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D27205
After increasing the lib/msun/tests WARNS to 6, this triggers a
compilation error for RISC-V.
Fixes: 87d65c747a ("lib/msun: Allow building tests with WARNS=6")
Reported by: Jenkins
The LLVM bug was fixed a long time ago and with D29076 this test actually
passes now.
Reviewed By: andrew
Differential Revision: https://reviews.freebsd.org/D29092
If long double has more than 64 mantissa bits, using uint64_t to hold the
mantissa bits will truncate the value and result in test failures. To fix
this problem use __uint128_t since all platforms that have
__LDBL_MANT_DIG__ > 64 also have compiler support for 128-bit integers.
Reviewed By: rlibby
Differential Revision: https://reviews.freebsd.org/D29076
I only tested the WARNS=6 change on AArch64 and AMD64, but this file has
unused functions for architectures with LDBL_PREC == 53.
While touching this file change the LDBL_PREC == 53 checks to i386 checks.
The long double tests should only be disabled for i386 (due to the rather
odd rounding mode that it uses) not all architectures where long double
is the same as double.
PR: 205449
Fixes: 87d65c747a ("lib/msun: Allow building tests with WARNS=6")
Reported by: Jenkins
This warning is very rarely useful (inline is a hint and not mandatory).
This flag results in many warnings being printed when compiling C++
code that uses the standard library with GCC.
This flag was originally added in back in r94332 but the flag is a no-op
in Clang ("This diagnostic flag exists for GCC compatibility, and has no
effect in Clang"). Removing it should make the GCC build output slightly
more readable.
Reviewed By: jrtc27, imp
Differential Revision: https://reviews.freebsd.org/D29235
Some CPUs (e.g. AArch64 QEMU) cannot trap on floating point exceptions and
therefore ignore the writes to the floating point control register inside
feenableexcept(). If no exceptions are enabled after
feenableexcept(FE_ALL_EXCEPT), we can assume that the CPU does not
support exceptions and we can then skip the test.
Reviewed By: dim
Differential Revision: https://reviews.freebsd.org/D29095
These appears to have been resolved by compiling the test with -fno-builtin
and/or using a newer compiler.
PR: 208703
Reviewed By: ngie
Differential Revision: https://reviews.freebsd.org/D28884
This provides better error messages that just an assertion failure and
also makes it easier to mark individual tests as XFAIL.
It was also helpful when coming up with D28786 and D28787.
Differential Revision: https://reviews.freebsd.org/D28798
We want to allow the UEFI firmware to enumerate and assign
addresses to PCI devices so we can boot from NVMe[1]. Address
assignment of PCI BARs is properly handled by the PCI emulation
code in general, but a few specific cases need additional support.
fbuf and passthru map additional objects into the guest physical
address space and so need to handle address updates. Here we add a
callback to emulated PCI devices to inform them of a BAR
configuration change. fbuf and passthru then watch for these BAR
changes and relocate the frame buffer memory segment and passthru
device mmio area respectively.
We also add new VM_MUNMAP_MEMSEG and VM_UNMAP_PPTDEV_MMIO ioctls
to vmm(4) to facilitate the unmapping needed for addres updates.
[1]: https://github.com/freebsd/uefi-edk2/pull/9/
Originally by: scottph
MFC After: 1 week
Sponsored by: Intel Corporation
Reviewed by: grehan
Approved by: philip (mentor)
Differential Revision: https://reviews.freebsd.org/D24066
Summary:
This change currently (partially) duplicates AC1 freqbands as AC2
as they are not fully overlapping.
It then adds the 11ac netband to the "etsi" domain including
"indoor" and "dfs" flags, which we can deal with, as well as
appropriate (round down) maxpower values.
Comments are left for the actual frequency bands as we do use the
centerfreq for the first/last (chansep sized) channel in the
freqband and their "id" name, which can be confusing.
Sponsored-by: Rubicon Communications, LLC ("Netgate")
Reviewed-by: philip, adrian
MFC-after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25999
In preparation for the move of the database out of base, add one more
path to lookup
Now the default lookup path is
1. base
2. localbase
3. localbase special site for custom terminfo (for ports adding custom
terminfo and avoid potential collision with the general db)
4. termcap
The plan is to allow the terminfo-db to be installed by end users via
a package for people willing to have the support for features from
this database provides. And keep the fallback on termcap for people who
don't want to hear about the terminfo db or how to configure the terminal
if it uses by default the features proposed in the definitions
of the terminfo db.
the first look up path is a window open for a proposal made by glebius@
consisting on creating a tool where the user at install time will select
the feature it want for a given terminal and generate its configurations
based on that. I won't work on it, but it is now posssible and there is
a path where to store those definitions
