like EX and SRX. The install command uses pkgfs to extract a kernel,
zero or more modules and a root file system from the specified package
and boots the kernel. The name of the kernel, the list of modules and
the name of the root file system can be specified by putting a
file called "metatags in the package.
The package to use is given by an URL. The schemes supported are
tftp and file. For the file scheme, the disk is currently hardcoded
but that should really look for the package on all devices and
partititions.
Obtained from: Juniper Networks, Inc.
particular, allow loaders to define the name of the RC script the
interpreter needs to use. Use this new-found control to have the
PXE loader (when compiled with TFTP support and not NFS support)
read from ${bootfile}.4th, where ${bootfile} is the name of the
file fetched by the PXE firmware.
The normal startup process involves reading the following files:
1. /boot/boot.4th
2. /boot/loader.rc or alternatively /boot/boot.conf
When these come from a FreeBSD-defined file system, this is all
good. But when we boot over the network, subdirectories and fixed
file names are often painful to administrators and there's really
no way for them to change the behaviour of the loader.
Obtained from: Juniper Networks, Inc.
This includes:
o All directories named *ia64*
o All files named *ia64*
o All ia64-specific code guarded by __ia64__
o All ia64-specific makefile logic
o Mention of ia64 in comments and documentation
This excludes:
o Everything under contrib/
o Everything under crypto/
o sys/xen/interface
o sys/sys/elf_common.h
Discussed at: BSDcan
the PowerPC port with all the Open Firmware bits removed and replaced by
their EFI counterparts. On the whole, I think I prefer Open Firmware.
This code is supposed to be an immutable shim that sits on the EFI system
partition, loads /boot/loader.efi from UFS and tells the real loader what
disk/partition to look at. It finds the UFS root partition by the somewhat
braindead approach of picking the first UFS partition it can find. Better
approaches are called for, but this works for now. This shim loader will
also be useful for secure boot in the future, which will require some
rearchitecture.
when MBR contains only PMBR entry or it is bootcamp-compatible.
If MBR has PMBR entry and some other, the loader rejects it.
Make these checks to be less strict. If loader decided that PMBR
isn't suitable for GPT, it will use MBR.
Reported by: Paul Thornton
Tested by: Paul Thornton
MFC after: 1 week
fragments; while this won't actually be used for anything (yet), it
doesn't hurt to ensure it is exposed to the tinderbox.
Requested by: imp, jmallett
MFC after: 3 weeks
arguments from type,filename to filename,type to be consistant with other
public file_whatever() functions, and change it to return a pointer to
the preloaded_file struct describing the file. Adjust existing callers.
- Similar to the hack for bootinfo32.c in userboot, define
_MACHINE_ELF_WANT_32BIT in the load_elf32 file handlers in userboot.
This allows userboot to load 32-bit kernels and modules.
- Copy the SMAP generation code out of bootinfo64.c and into its own
file so it can be shared with bootinfo32.c to pass an SMAP to the i386
kernel.
- Use uint32_t instead of u_long when aligning module metadata in
bootinfo32.c in userboot, as otherwise the metadata used 64-bit
alignment which corrupted the layout.
- Populate the basemem and extmem members of the bootinfo struct passed
to 32-bit kernels.
- Fix the 32-bit stack in userboot to start at the top of the stack
instead of the bottom so that there is room to grow before the
kernel switches to its own stack.
- Push a fake return address onto the 32-bit stack in addition to the
arguments normally passed to exec() in the loader. This return
address is needed to convince recover_bootinfo() in the 32-bit
locore code that it is being invoked from a "new" boot block.
- Add a routine to libvmmapi to setup a 32-bit flat mode register state
including a GDT and TSS that is able to start the i386 kernel and
update bhyveload to use it when booting an i386 kernel.
- Use the guest register state to determine the CPU's current instruction
mode (32-bit vs 64-bit) and paging mode (flat, 32-bit, PAE, or long
mode) in the instruction emulation code. Update the gla2gpa() routine
used when fetching instructions to handle flat mode, 32-bit paging, and
PAE paging in addition to long mode paging. Don't look for a REX
prefix when the CPU is in 32-bit mode, and use the detected mode to
enable the existing 32-bit mode code when decoding the mod r/m byte.
Reviewed by: grehan, neel
MFC after: 1 month
they can easily be used by later post-processing. When searching for
a compiled-in fdt blob, use the section headers to get the size and
location of the .dynsym section to do a symbol search.
This fixes a problem where the search could overshoot the symbol
table and wander into the string table. Sometimes that was harmless
and sometimes it lead to spurious panic messages about an offset
bigger than the module size.
elf headers, mask out the high nibble of that address. This effectly makes
the entry point the offset from the load address, and it gets adjusted for
the actual load address before jumping to it.
Masking the high nibble makes assumptions about memory layout that are true
for all the arm platforms we support right now, but it makes me uneasy.
This needs to be revisited.
After digging through more carefully, it looks like there's
no real need to have the DTB in the module directory.
So we can simplify a lot: Just copy DTB into local heap
for "fdt addr" and U-Boot integration, drop all the extra
COPYIN() calls.
I've left one final COPYIN() to update the in-kernel DTB
for consistency with how this code used to work, but I'm
no longer convinced it's appropriate here.
I've also remove the mem_load_raw() utility that I added
to boot/common/module.c with r247045 since it's no longer
necessary.
This will be used by some upcoming changes to loader(8) FDT
handling to allow it to use an FDT provided by an earlier
boot stage the same as an FDT loaded from disk.
r238966
Bump up the heap size to 1MB. With a few kernel modules, libstand
zalloc and userboot seem to want to use ~600KB of heap space, which
results in a segfault when malloc fails in bhyveload.
r241180
Clarify comment about default number of FICL dictionary cells.
r241153
Allow the number of FICL dictionary cells to be overridden.
Loading a 7.3 ISO with userboot/amd64 takes up 10035 cells,
overflowing the long-standing default of 10000.
Bump userboot's value up to 15000 cells.
Reviewed by: dteske (r238966,241180)
Obtained from: NetApp
command execution. In case of such unhandled exception, vmReset() inside
ficlExecC() flushes the VM state. Attempt to return back to Forth after
that cause garbage dereference with unexpected results. To avoid that
situation call vmThrow() directly instead of expecting Forth to do it.
- clarify meaning of console flags
- perform i/o via a console only if both of the following conditions are met:
o console is active (selected by user or config)
o console flags that it can perform the operation
- warn if a chosen console can not work (the warning may go nowhere without
working and active console, though)
Reviewed by: jhb
Tested by: Uffe Jakobsen <uffe@uffe.org>,
Olivier Cochard-Labbe' <olivier@cochard.me>
MFC after: 26 days
disk_open(). Very often this is called several times for one file.
This leads to reading partition table metadata for each call. To
reduce the number of disk I/O we have a simple block cache, but it
is very dumb and more than half of I/O operations related to reading
metadata, misses this cache.
Introduce new cache layer to resolve this problem. It is independent
and doesn't need initialization like bcache, and will work by default
for all loaders which use the new DISK API. A successful disk_open()
call to each new disk or partition produces new entry in the cache.
Even more, when disk was already open, now opening of any nested
partitions does not require reading top level partition table.
So, if without this cache, partition table metadata was read around
20-50 times during boot, now it reads only once. This affects the booting
from GPT and MBR from the UFS.
number is not exactly specified. When the disk has MBR, also try to read
BSD label after ptable_getpart() call. When the disk has GPT, also set
d_partition to 255. Mostly, this is how it worked before.
When we open the disk, check the type of partition table, that has
been detected. If this is BSD label, then we assume this is DD mode.
Reported by: dim@
