Make part of John Birrell's KSE patch permanent..
Specifically, remove:
Any reference of the ksegrp structure. This feature was
never fully utilised and made things overly complicated.
All code in the scheduler that tried to make threaded programs
fair to unthreaded programs. Libpthread processes will already
do this to some extent and libthr processes already disable it.
Also:
Since this makes such a big change to the scheduler(s), take the opportunity
to rename some structures and elements that had to be moved anyhow.
This makes the code a lot more readable.
The ULE scheduler compiles again but I have no idea if it works.
The 4bsd scheduler still reqires a little cleaning and some functions that now do
ALMOST nothing will go away, but I thought I'd do that as a separate commit.
Tested by David Xu, and Dan Eischen using libthr and libpthread.
if waittime was zero (the lock was uncontested) l->lpo_waittime
in the hash table would not get initialized.
Inspection prompted by questions from: Attilio Rao
pthread_cancel()ed, it is expected that the thread will not
consume a pthread_cond_signal(), therefor, we use thr_wake()
to mark a flag, the flag tells a thread calling do_cv_wait()
in umtx code to not block on a condition variable.
Thread library is expected that once a thread detected itself
is in pthread_cond_wait, it will call the thr_wake() for itself
in its SIGCANCEL handler.
priority mutex implemented, it is the time to introduce this stuff,
now we can use umutex and ucond together to implement pthread's
condition wait/signal.
__stop_<section> symbols generated by the static linker for elf
sections. This is done only for the final link, and not for ld -r.
Augment elf_obj in-kernel linker by recognizing such special symbols,
and resolving them to the start and end of the section automatically.
As result, linker sets on amd64 could be used in the same way as on
other architectures, without explicit calls to linker_file_lookup_set().
Requested by: rdivacky
No objections from: peter, jhb
by default for sun4v where it is absolutely required.
This change moves the buffer from struct pcpu to the stack to avoid
using the critical section which created a LOR in a couple of cases
due to interaction with the tty code and kqueue. The LOR can't be
fixed with the critical section and the pcpu buffer can't be used
without the critical section.
Putting the buffer on the stack was my initial solution, but it was
pointed out that the stress on the stack might cause problems
depending on the call path. We don't have a way of creating tests
for those possible cases, so it's best to leave this as an option
for the time being. In time we may get enough data to enable this
option more generally.
listening socket after the pass that cleans those queues. This
results in these connections being orphaned (and leaked). The fix
is to clean up the so queues after detaching the socket from the
protocol. Thanks to ups and jhb for discussions and a thorough code
review.
msgsnd and rechecking resources. This problem was found while I was running
Linux Test Project test suite (test cases: msgctl08, msgctl09).
Change `msgwait' to `msgsnd' and `msgrcv' to distinguish its sleeping
conditions. Few cosmetic changes to debugging messages.
which allows to use it with different kinds of locks. For example it allows
to implement Solaris conditions variables which will be used in ZFS port on
top of sx(9) locks.
Reviewed by: jhb
channel for tsleep():
- Allow tsleep() on &lbolt without Giant with a timeout 0 since &lbolt has
an implied timeout.
- If &lbolt is used with msleep() pass NULL to sleepq_add() for the lock
object. Unlike other sleepq channels, &lbolt doesn't have an associated
owning lock.
written to the socket). The rewrite in revision 1.240 got confused by the
FreeBSD 4.x bug compatibility code.
For some reason lighttpd, that was used for testing the new sendfile code,
was not affected by the problem but apache and others using headers/trailers
in the sendfile call received incorrect sbytes values after return from non-
blocking sockets. This then lead to restarts with wrong offsets and thus
mixed up file contents when the socket was writeable again. All programs
not using headers/trailers, like ftpd, were not affected by the bug.
Reported by: Pawel Worach <pawel.worach-at-gmail.com>
Tested by: Pawel Worach <pawel.worach-at-gmail.com>
wait (time waited to acquire) and hold times for *all* kernel locks. If
the architecture has a system synchronized TSC, the profiling code will
use that - thereby minimizing profiling overhead. Large chunks of profiling
code have been moved out of line, the overhead measured on the T1 for when
it is compiled in but not enabled is < 1%.
Approved by: scottl (standing in for mentor rwatson)
Reviewed by: des and jhb
- Don't drop the lock just to reacquire it again to check rushjob, this
only wastes time.
- Use msleep() to drop the mutex while sleeping instead of explicitly
unlocking around tsleep.
Reviewed by: pjd
label after the sbunlock() part.
This correctly handles calls to sendfile(2) without valid parameters
that was broken in rev. 1.240.
Coverity error: 272162
specific privilege names to a broad range of privileges. These may
require some future tweaking.
Sponsored by: nCircle Network Security, Inc.
Obtained from: TrustedBSD Project
Discussed on: arch@
Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri,
Alex Lyashkov <umka at sevcity dot net>,
Skip Ford <skip dot ford at verizon dot net>,
Antoine Brodin <antoine dot brodin at laposte dot net>
privilege for threads and credentials. Unlike the existing suser(9)
interface, priv(9) exposes a named privilege identifier to the privilege
checking code, allowing more complex policies regarding the granting of
privilege to be expressed. Two interfaces are provided, replacing the
existing suser(9) interface:
suser(td) -> priv_check(td, priv)
suser_cred(cred, flags) -> priv_check_cred(cred, priv, flags)
A comprehensive list of currently available kernel privileges may be
found in priv.h. New privileges are easily added as required, but the
comments on adding privileges found in priv.h and priv(9) should be read
before doing so.
The new privilege interface exposed sufficient information to the
privilege checking routine that it will now be possible for jail to
determine whether a particular privilege is granted in the check routine,
rather than relying on hints from the calling context via the
SUSER_ALLOWJAIL flag. For now, the flag is maintained, but a new jail
check function, prison_priv_check(), is exposed from kern_jail.c and used
by the privilege check routine to determine if the privilege is permitted
in jail. As a result, a centralized list of privileges permitted in jail
is now present in kern_jail.c.
The MAC Framework is now also able to instrument privilege checks, both
to deny privileges otherwise granted (mac_priv_check()), and to grant
privileges otherwise denied (mac_priv_grant()), permitting MAC Policy
modules to implement privilege models, as well as control a much broader
range of system behavior in order to constrain processes running with
root privilege.
The suser() and suser_cred() functions remain implemented, now in terms
of priv_check() and the PRIV_ROOT privilege, for use during the transition
and possibly continuing use by third party kernel modules that have not
been updated. The PRIV_DRIVER privilege exists to allow device drivers to
check privilege without adopting a more specific privilege identifier.
This change does not modify the actual security policy, rather, it
modifies the interface for privilege checks so changes to the security
policy become more feasible.
Sponsored by: nCircle Network Security, Inc.
Obtained from: TrustedBSD Project
Discussed on: arch@
Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri,
Alex Lyashkov <umka at sevcity dot net>,
Skip Ford <skip dot ford at verizon dot net>,
Antoine Brodin <antoine dot brodin at laposte dot net>
the correct syscalls.master's $FreeBSD$ tag record and
a make sysent in sys/compat/freebsd32. Thanks Ruslan
for pointing out the steps I missed :-0
Approved by: gnn
work is not just mine, but it is also the works of Peter Lei
and Michael Tuexen. They both are my two key other developers
working on the project.. and they need ata-boy's too:
****
peterlei@cisco.comtuexen@fh-muenster.de
****
I did do a make sysent which updated the
syscall's and sysproto.. I hope that is correct... without
it you don't build since we have new syscalls for SCTP :-0
So go out and look at the NOTES, add
option SCTP (make sure inet and inet6 are present too)
and play with SCTP.
I will see about comitting some test tools I have after I
figure out where I should place them. I also have a
lib (libsctp.a) that adds some of the missing socketapi
functions that I need to put into lib's.. I will talk
to George about this :-)
There may still be some 64 bit issues in here, none of
us have a 64 bit processor to test with yet.. Michael
may have a MAC but thats another beast too..
If you have a mac and want to use SCTP contact Michael
he maintains a web site with a loadable module with
this code :-)
Reviewed by: gnn
Approved by: gnn
