Override global retry limit (which is set in R92C_RL) via per-frame
TX descriptor field. Obsoletes D3840 (should work better with 2+ vaps).
Tested with RTL8188EU and RTL8192CUS in STA mode (maxretry = [3-9]).
- Revert the change for seed(0) in r300384. I misunderstood the standard
and while our random() implementation in libkern may be improved, it
handles the seed(0) case fine.
Pointed out by: bde, ache
After r285994, sysctl(8) was fixed to use 273.15 instead of 273.20 as 0C
reference and as result, the temperature read in sysctl(8) now exibits a
+0.1C difference.
This commit fix the kernel references to match the reference value used in
sysctl(8) after r285994.
Sponsored by: Rubicon Communications (Netgate)
The GPIO hardware should not be owned by a single device, this defeats any
chance of use of the GPIO controller as an interrupt source.
ow(4) is now the only consumer of this 'feature' before we can remove it
for good.
Discussed with: ian, bsdimp
- Revert r300377: The implementation claims to return a value
within the range. [1]
- Adjust the value for the case of a zero seed, whihc according
to standards should be equivalent to a seed of value 1.
Pointed out by: cem
wpa_supplicant(8) expects to see 'scan complete' event after every
scan command; in case, when event is not sent it will hang for
indefinite time.
PR: 209198
the current offset (spelled: "fs.pindex") until it is known whether a
backing object exists. In fact, if not for the fact that the backing
object offset is zero when there is no backing object, this update would
produce a broken offset.
Reviewed by: kib
This is a long standing problem: our random() function returns an
unsigned integer but the rand provided by ndis(4) returns an int.
Scale it down.
MFC after: 2 weeks
In ndis(4) we expose a rand() function that was constantly reseeding
with a time depending function every time it was called. This
essentially broke the reasoning behind seeding, and rendered srand()
a no-op.
Keep it simple, just use random() and srandom() as it's meant to work.
It would have been tempting to just go for arc4random() but we
want to mimic Microsoft, and we don't need crypto-grade randomness
here.
PR: 209616
MFC after: 2 weeks
compilers can emit arm instructions that require 8-byte alignment. The
alignment-sensitive instructions were added in armv5, which has to be
supported by our combined v4/v5 kernels, so the value is set uncoditionally
for all arm architecture versions.
Also adjust the comment to explain in more detail why the macros have the
form and values they do.
Per advice from bde@, maintain the unsignedness of the value of _ALIGNBYTES
(but do so using his second choice of allowing sizeof() to supply the
unsignedness, rather than just hardcoding '8U', which in my mind would
require an even more verbose comment to explain why it's right). Also
explain in the comment that the resulting type of _ALIGN() is equivelent
to uinptr_t on arm (32-bit unsigned int), but it's purposely spelled as
"unsigned" to avoid problems with including other header files. Even
including machine/_types.h to allow use of __uintptr_t causes compilation
failures because of this header being included (indirectly) in asm code.
The discussion that led to this change (albeit at a glacial pace) is at
https://lists.freebsd.org/pipermail/svn-src-head/2014-November/064593.html
volumes. Treat the field as a semaphore protecting availability of
the device for mounting. Do no access devvp->v_rdev without the vnode
lock owned.
Protect change of the devvp->v_bufobj bo_ops vector with the vnode
lock.
Reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
This is the same problem as r290629. With META_MODE we do not generate
.depend files, so there is no proper dependency to lookup. Guessed
dependencies must be used. If this proves to be a problem then we will
have to generate and use .depend files even with META_MODE.
Sponsored by: EMC / Isilon Storage Division
sglist_count_vmpages() determines the number of segments required for
a buffer described by an array of VM pages. sglist_append_vmpages()
adds the segments described by such a buffer to an sglist. The latter
function is largely pulled from sglist_append_bio(), and
sglist_append_bio() now uses sglist_append_vmpages().
Reviewed by: kib
Sponsored by: Chelsio Communications
Add implementations of bus_map/unmap_resource to the x86 nexus driver.
Change bus_activate/deactivate_resource to honor RF_UNMAPPED and to
use bus_map/unmap_resource to create/destroy the implicit mapping when
RF_UNMAPPED is not set.
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D5237
Add a pair of bus methods that can be used to "map" resources for direct
CPU access using bus_space(9). bus_map_resource() creates a mapping and
bus_unmap_resource() releases a previously created mapping. Mappings are
described by 'struct resource_map' object. Pointers to these objects can
be passed as the first argument to the bus_space wrapper API used for bus
resources.
Drivers that wish to map all of a resource using default settings
(for example, using uncacheable memory attributes) do not need to change.
However, drivers that wish to use non-default settings can now do so
without jumping through hoops.
First, an RF_UNMAPPED flag is added to request that a resource is not
implicitly mapped with the default settings when it is activated. This
permits other activation steps (such as enabling I/O or memory decoding
in a device's PCI command register) to be taken without creating a
mapping. Right now the AGP drivers don't set RF_ACTIVE to avoid using
up a large amount of KVA to map the AGP aperture on 32-bit platforms.
Once RF_UNMAPPED is supported on all platforms that support AGP this
can be changed to using RF_UNMAPPED with RF_ACTIVE instead.
Second, bus_map_resource accepts an optional structure that defines
additional settings for a given mapping.
For example, a driver can now request to map only a subset of a resource
instead of the entire range. The AGP driver could also use this to only
map the first page of the aperture (IIRC, it calls pmap_mapdev() directly
to map the first page currently). I will also eventually change the
PCI-PCI bridge driver to request mappings of the subset of the I/O window
resource on its parent side to create mappings for child devices rather
than passing child resources directly up to nexus to be mapped. This
also permits bridges that do address translation to request suitable
mappings from a resource on the "upper" side of the bus when mapping
resources on the "lower" side of the bus.
Another attribute that can be specified is an alternate memory attribute
for memory-mapped resources. This can be used to request a
Write-Combining mapping of a PCI BAR in an MI fashion. (Currently the
drivers that do this call pmap_change_attr() directly for x86 only.)
Note that this commit only adds the MI framework. Each platform needs
to add support for handling RF_UNMAPPED and thew new
bus_map/unmap_resource methods. Generally speaking, any drivers that
are calling rman_set_bustag() and rman_set_bushandle() need to be
updated.
Discussed on: arch
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D5237
We were inconsistent about the use of time_second vs. time_uptime.
Always use time_uptime so the value can be meaningfully compared.
Submitted by: "Max" <maximos@als.nnov.ru>
MFC after: 4 days
Specification, Version 2, but marked as legacy, and have been removed from
later specifications. After 12 years it is time to remove them from new
architectures when the main use for sbrk is an invalid method to attempt
to find how much memory has been allocated from malloc.
There are a few places in the tree that still call sbrk, however they are
not used on arm64. They will need to be fixed to cross build from arm64,
but these will be fixed in a follow up commit.
Old copies of binutils from ports called into sbrk, however this has been
fixed around 6 weeks ago. It is advised to update binutils on arm64 before
installing a world that includes this change.
Reviewed by: brooks, emaste
Obtained from: brooks
Relnotes: yes
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D6464
Fix panics which were present when BGX and PF module were unloaded.
Reviewed by: zbb
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D6346
Add directory structure and fix dependencies to be able to
build and use Cavium VNIC driver as a module.
Reviewed by: zbb
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D6345
utilizing previously unused arg field of struct ccb_notify_acknowledge.
This makes new QUERY TASK, QUERY TASK SET and QUERY ASYNC EVENT requests
really functional for CAM target mode drivers.
tested on the Pass 1.1 and 2.0 ThunderX machines in the Netperf cluster.
Reviewed by: jhb
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6453
outlived their usefulness. This allows to remove drop/pickup Giant
wrappers around GEOM calls.
Discussed with: alfred, imp, phk
Sponsored by: The FreeBSD Foundation
Store the last doorbell write in the mlx5e_sq structure and write the
doorbell to the hardware when the transmit routine finishes
transmitting all queued mbufs.
Sponsored by: Mellanox Technologies
Tested by: Netflix
MFC after: 1 week
This patch implements a sysctl which allows setting a factor, N, for
how many work queue elements can be generated before requiring a
completion event. When a completion event happens the code simulates N
completion events instead of only one. When draining a transmit queue,
N-1 NOPs are transmitted at most, to force generation of the final
completion event. Further a timer is running every HZ ticks to flush
any remaining data off the transmit queue when the tx_completion_fact
> 1.
The goal of this feature is to reduce the PCI bandwidth needed when
transmitting data.
Sponsored by: Mellanox Technologies
Tested by: Netflix
MFC after: 1 week
ip_frag tuneables aren't registered in the ipf_tuners linked list.
This commmit enables the two existing ip_frag tuneables by registering
them.
MFC after: 1 month
Also check the return value of copyin(9) to prevent unnecessary allocation in the failure case.
Submitted by: ngie
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D5155
Replace all rounding with the round{up,down}2 macros
a missing set of braces caused the previous code to be incorrect
replace alloca() with malloc() because alloca() can return an allocation
that is actually invalid, causing boot to fail
Reviewed by: emaste, ed
Thanks To: peter
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D6213
This patch introduces support of BHND on SoC: nexus-to-bhnd drivers.
bhnd_soc is attached under nexus and responsible for all BHND-style calls
from bhnd(4) bus to parents.
bcma_nexus is bhnd(4) bus, attached to bhnd_soc and implement all
nexus-style behaviour of BHND.
Submitted by: Michael Zhilin <mizhka@gmail.com>
Reviewed by: Landon Fuller <landonf@landonf.org>
Differential Revision: https://reviews.freebsd.org/D6248
Adds support for adjusting active bus resource allocations, limiting the
range to the constraints of the register window within which the resource
is mapped.
This is the final set of bhnd changes required to support delegating
ChipCommon's register space to child devices.
Submitted by: Landon Fuller <landonf@landonf.org>
Differential Revision: https://reviews.freebsd.org/D6470
This adds bhnd-compatible implementations of bus_(read|write|set)_(1|2|4) APIs,
and upgrades the SPROM parsing code to use bhnd_bus_read_region_stream_2().
This a precursor to bridge support for resource adjustment and the new
ChipCommon bus support.
Tested:
* Tested against BCM4331
* Kernel build verified via tinderbox.
Submitted by: Landon Fuller <landonf@landonf.org>
Differential Revision: https://reviews.freebsd.org/D6469
- Add a pcib_detach() function for the PCI-PCI bridge driver. It
tears down the NEW_PCIB and hotplug state including destroying
resource managers, deleting child devices, and disabling hotplug
events.
- Add a detach method to the ACPI PCI-PCI bridge driver which calls
pcib_detach() and then frees the copy of the _PRT interrupt routing
table.
- Add a detach method to the PCI-Cardbus bridge driver which frees
the PCI bus resources in addition to calling cbb_detach().
- Explicitly clear any pending hotplug events during attach to ensure
future events will generate an interrupt.
- If a the Command Completed bit is set in the slot status register
when the command completion timeout fires, treat it as if the
command completed and the completion interrupt was just lost rather
than forcing a detach.
- Don't wait for a Command Completed notification if Command Completion
interrupts are disabled. The spec explicitly says no interrupt is
enabled when clearing CCIE, and on my T400 no interrupt is generated
when CCIE is changed from cleared to set, either. In addition, the
T400 doesn't appear to set the Command Completed bit in the cases
where it doesn't generate an interrupt, so don't schedule the timer
either. (If the CC bit were always set, one could always set the timer
and rely on the logic of treating CC set as a missed interrupt.)
Reviewed by: imp (older version)
Differential Revision: https://reviews.freebsd.org/D6424
Split getchannels() method in ath_hal/ah_regdomain.c into a subset
of functions for better readability.
Note: due to different internal structure, it cannot use
ieee80211_add_channel*() (however, some parts are done in a
similar manner).
Differential Revision: https://reviews.freebsd.org/D6139
control to a three way setting.
0 - Totally disable ECN. (no change)
1 - Enable ECN if incoming connections request it. Outgoing
connections will request ECN. (no change from present != 0 setting)
2 - Enable ECN if incoming connections request it. Outgoing
conections will not request ECN.
Change the default value of net.inet.tcp.ecn.enable from 0 to 2.
Linux version 2.4.20 and newer, Solaris, and Mac OS X 10.5 and newer have
similar capabilities. The actual values above match Linux, and the default
matches the current Linux default.
Reviewed by: eadler
MFC after: 1 month
MFH: yes
Sponsored by: https://reviews.freebsd.org/D6386
Do not try to start a scan when interface is not running.
How-to-reproduce:
1) ifconfig wlan0 create wlandev urtwn0
2) wlandebug -i wlan0 state
3) ifconfig wlan0 scan
ieee80211.c:
add_chanlist(): 'error' variable will be uninitialized if
no channels were passed; return '0' instead.
ieee80211_action.c:
ieee80211_send_action_register(): drop 'break' after 'return'.
ieee80211_crypto_none.c:
none_encap(): 'keyid' is not used in non-debug builds; hide it
behind IEEE80211_DEBUG ifdef.
ieee80211_freebsd.c:
Staticize global 'ieee80211_debug' variable (used only in this
file).
ieee80211_hostap.c:
Fix a comment (associatio -> association).
ieee80211_ht.c:
ieee80211_setup_htrates(): initialize 'maxunequalmcs' to 0 to mute
compiler warning.
ieee80211_hwmp.c:
hwmp_recv_preq(): copy 'prep' between conditional blocks to fix
-Wshadow warning.
ieee80211_mesh.c:
mesh_newstate(): remove duplicate 'ni' definition.
mesh_recv_group_data(): fix -Wempty-body warning in non-debug
builds.
ieee80211_phy.c:
ieee80211_compute_duration(): remove 'break' after panic() call.
ieee80211_scan_sta.c:
Hide some TDMA-specific macros under IEEE80211_SUPPORT_TDMA ifdef
adhoc_pick_bss(): remove 'ic' pointer redefinition.
ieee80211_sta.c:
sta_beacon_miss(): remove 'ic' pointer redefinition.
ieee80211_superg.c:
superg_ioctl_set80211(): drop unreachable return.
Tested with clang 3.8.0, gcc 4.6.4 and gcc 5.3.0.
SHF_COMPRESSED section contains compressed data
DT_TLSDESC_PLT Location of PLT entry for TLS descriptor resolver calls
DT_TLSDESC_GOT Location of GOT entry used by resolver PLT entry
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
cleanup consists of fixes to comments. However, there is one change to
code: Remove special-case handling of errors involving the kernel map.
We do not perform I/O on the kernel map, so there is no need for this
special case.
Reviewed by: kib (an earlier version)
pq_vcnt, as a count of real things, has no business being negative. It is only
ever initialized by a u_int counter.
The warning came from the atomic_add_int() in vm_pagequeue_cnt_add().
Rectify the warning by changing the variable to u_int. No functional change.
Suggested by: Clang 3.3
Sponsored by: EMC / Isilon Storage Division
This code was originally implemented 7 years ago, but never really worked
due to trivial error. I think this functionality may be not required.
Initiators supporting optional periodic command status checks detected
those terminated commands and retried them 3 seconds later. But thinking
about less featured initiators and the fact that it is our race makes
virtual ports "unknown" it may be good to have this feature.
Frankly, it doesn't make sense for vm_pageout_wakeup_thresh to have a negative
value (it is only ever set to a fraction of v_free_min, which is unsigned and
also obviously non-negative). But I'm not going to try and convert every
non-negative scalar in the VM to unsigned today, so just cast it for the
comparison.
Submitted by: Clang 3.3
Sponsored by: EMC / Isilon Storage Division
This change includes support for SCSI SMR drives (which conform to the
Zoned Block Commands or ZBC spec) and ATA SMR drives (which conform to
the Zoned ATA Command Set or ZAC spec) behind SAS expanders.
This includes full management support through the GEOM BIO interface, and
through a new userland utility, zonectl(8), and through camcontrol(8).
This is now ready for filesystems to use to detect and manage zoned drives.
(There is no work in progress that I know of to use this for ZFS or UFS, if
anyone is interested, let me know and I may have some suggestions.)
Also, improve ATA command passthrough and dispatch support, both via ATA
and ATA passthrough over SCSI.
Also, add support to camcontrol(8) for the ATA Extended Power Conditions
feature set. You can now manage ATA device power states, and set various
idle time thresholds for a drive to enter lower power states.
Note that this change cannot be MFCed in full, because it depends on
changes to the struct bio API that break compatilibity. In order to
avoid breaking the stable API, only changes that don't touch or depend on
the struct bio changes can be merged. For example, the camcontrol(8)
changes don't depend on the new bio API, but zonectl(8) and the probe
changes to the da(4) and ada(4) drivers do depend on it.
Also note that the SMR changes have not yet been tested with an actual
SCSI ZBC device, or a SCSI to ATA translation layer (SAT) that supports
ZBC to ZAC translation. I have not yet gotten a suitable drive or SAT
layer, so any testing help would be appreciated. These changes have been
tested with Seagate Host Aware SATA drives attached to both SAS and SATA
controllers. Also, I do not have any SATA Host Managed devices, and I
suspect that it may take additional (hopefully minor) changes to support
them.
Thanks to Seagate for supplying the test hardware and answering questions.
sbin/camcontrol/Makefile:
Add epc.c and zone.c.
sbin/camcontrol/camcontrol.8:
Document the zone and epc subcommands.
sbin/camcontrol/camcontrol.c:
Add the zone and epc subcommands.
Add auxiliary register support to build_ata_cmd(). Make sure to
set the CAM_ATAIO_NEEDRESULT, CAM_ATAIO_DMA, and CAM_ATAIO_FPDMA
flags as appropriate for ATA commands.
Add a new get_ata_status() function to parse ATA result from SCSI
sense descriptors (for ATA passthrough over SCSI) and ATA I/O
requests.
sbin/camcontrol/camcontrol.h:
Update the build_ata_cmd() prototype
Add get_ata_status(), zone(), and epc().
sbin/camcontrol/epc.c:
Support for ATA Extended Power Conditions features. This includes
support for all features documented in the ACS-4 Revision 12
specification from t13.org (dated February 18, 2016).
The EPC feature set allows putting a drive into a power power mode
immediately, or setting timeouts so that the drive will
automatically enter progressively lower power states after various
idle times.
sbin/camcontrol/fwdownload.c:
Update the firmware download code for the new build_ata_cmd()
arguments.
sbin/camcontrol/zone.c:
Implement support for Shingled Magnetic Recording (SMR) drives
via SCSI Zoned Block Commands (ZBC) and ATA Zoned Device ATA
Command Set (ZAC).
These specs were developed in concert, and are functionally
identical. The primary differences are due to SCSI and ATA
differences. (SCSI is big endian, ATA is little endian, for
example.)
This includes support for all commands defined in the ZBC and
ZAC specs.
sys/cam/ata/ata_all.c:
Decode a number of additional ATA command names in ata_op_string().
Add a new CCB building function, ata_read_log().
Add ata_zac_mgmt_in() and ata_zac_mgmt_out() CCB building
functions. These support both DMA and NCQ encapsulation.
sys/cam/ata/ata_all.h:
Add prototypes for ata_read_log(), ata_zac_mgmt_out(), and
ata_zac_mgmt_in().
sys/cam/ata/ata_da.c:
Revamp the ada(4) driver to support zoned devices.
Add four new probe states to gather information needed for zone
support.
Add a new adasetflags() function to avoid duplication of large
blocks of flag setting between the async handler and register
functions.
Add new sysctl variables that describe zone support and paramters.
Add support for the new BIO_ZONE bio, and all of its subcommands:
DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP,
DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS.
sys/cam/scsi/scsi_all.c:
Add command descriptions for the ZBC IN/OUT commands.
Add descriptions for ZBC Host Managed devices.
Add a new function, scsi_ata_pass() to do ATA passthrough over
SCSI. This will eventually replace scsi_ata_pass_16() -- it
can create the 12, 16, and 32-byte variants of the ATA
PASS-THROUGH command, and supports setting all of the
registers defined as of SAT-4, Revision 5 (March 11, 2016).
Change scsi_ata_identify() to use scsi_ata_pass() instead of
scsi_ata_pass_16().
Add a new scsi_ata_read_log() function to facilitate reading
ATA logs via SCSI.
sys/cam/scsi/scsi_all.h:
Add the new ATA PASS-THROUGH(32) command CDB. Add extended and
variable CDB opcodes.
Add Zoned Block Device Characteristics VPD page.
Add ATA Return SCSI sense descriptor.
Add prototypes for scsi_ata_read_log() and scsi_ata_pass().
sys/cam/scsi/scsi_da.c:
Revamp the da(4) driver to support zoned devices.
Add five new probe states, four of which are needed for ATA
devices.
Add five new sysctl variables that describe zone support and
parameters.
The da(4) driver supports SCSI ZBC devices, as well as ATA ZAC
devices when they are attached via a SCSI to ATA Translation (SAT)
layer. Since ZBC -> ZAC translation is a new feature in the T10
SAT-4 spec, most SATA drives will be supported via ATA commands
sent via the SCSI ATA PASS-THROUGH command. The da(4) driver will
prefer the ZBC interface, if it is available, for performance
reasons, but will use the ATA PASS-THROUGH interface to the ZAC
command set if the SAT layer doesn't support translation yet.
As I mentioned above, ZBC command support is untested.
Add support for the new BIO_ZONE bio, and all of its subcommands:
DISK_ZONE_OPEN, DISK_ZONE_CLOSE, DISK_ZONE_FINISH, DISK_ZONE_RWP,
DISK_ZONE_REPORT_ZONES, and DISK_ZONE_GET_PARAMS.
Add scsi_zbc_in() and scsi_zbc_out() CCB building functions.
Add scsi_ata_zac_mgmt_out() and scsi_ata_zac_mgmt_in() CCB/CDB
building functions. Note that these have return values, unlike
almost all other CCB building functions in CAM. The reason is
that they can fail, depending upon the particular combination
of input parameters. The primary failure case is if the user
wants NCQ, but fails to specify additional CDB storage. NCQ
requires using the 32-byte version of the SCSI ATA PASS-THROUGH
command, and the current CAM CDB size is 16 bytes.
sys/cam/scsi/scsi_da.h:
Add ZBC IN and ZBC OUT CDBs and opcodes.
Add SCSI Report Zones data structures.
Add scsi_zbc_in(), scsi_zbc_out(), scsi_ata_zac_mgmt_out(), and
scsi_ata_zac_mgmt_in() prototypes.
sys/dev/ahci/ahci.c:
Fix SEND / RECEIVE FPDMA QUEUED in the ahci(4) driver.
ahci_setup_fis() previously set the top bits of the sector count
register in the FIS to 0 for FPDMA commands. This is okay for
read and write, because the PRIO field is in the only thing in
those bits, and we don't implement that further up the stack.
But, for SEND and RECEIVE FPDMA QUEUED, the subcommand is in that
byte, so it needs to be transmitted to the drive.
In ahci_setup_fis(), always set the the top 8 bits of the
sector count register. We need it in both the standard
and NCQ / FPDMA cases.
sys/geom/eli/g_eli.c:
Pass BIO_ZONE commands through the GELI class.
sys/geom/geom.h:
Add g_io_zonecmd() prototype.
sys/geom/geom_dev.c:
Add new DIOCZONECMD ioctl, which allows sending zone commands to
disks.
sys/geom/geom_disk.c:
Add support for BIO_ZONE commands.
sys/geom/geom_disk.h:
Add a new flag, DISKFLAG_CANZONE, that indicates that a given
GEOM disk client can handle BIO_ZONE commands.
sys/geom/geom_io.c:
Add a new function, g_io_zonecmd(), that handles execution of
BIO_ZONE commands.
Add permissions check for BIO_ZONE commands.
Add command decoding for BIO_ZONE commands.
sys/geom/geom_subr.c:
Add DDB command decoding for BIO_ZONE commands.
sys/kern/subr_devstat.c:
Record statistics for REPORT ZONES commands. Note that the
number of bytes transferred for REPORT ZONES won't quite match
what is received from the harware. This is because we're
necessarily counting bytes coming from the da(4) / ada(4) drivers,
which are using the disk_zone.h interface to communicate up
the stack. The structure sizes it uses are slightly different
than the SCSI and ATA structure sizes.
sys/sys/ata.h:
Add many bit and structure definitions for ZAC, NCQ, and EPC
command support.
sys/sys/bio.h:
Convert the bio_cmd field to a straight enumeration. This will
yield more space for additional commands in the future. After
change r297955 and other related changes, this is now possible.
Converting to an enumeration will also prevent use as a bitmask
in the future.
sys/sys/disk.h:
Define the DIOCZONECMD ioctl.
sys/sys/disk_zone.h:
Add a new API for managing zoned disks. This is very close to
the SCSI ZBC and ATA ZAC standards, but uses integers in native
byte order instead of big endian (SCSI) or little endian (ATA)
byte arrays.
This is intended to offer to the complete feature set of the ZBC
and ZAC disk management without requiring the application developer
to include SCSI or ATA headers. We also use one set of headers
for ioctl consumers and kernel bio-level consumers.
sys/sys/param.h:
Bump __FreeBSD_version for sys/bio.h command changes, and inclusion
of SMR support.
usr.sbin/Makefile:
Add the zonectl utility.
usr.sbin/diskinfo/diskinfo.c
Add disk zoning capability to the 'diskinfo -v' output.
usr.sbin/zonectl/Makefile:
Add zonectl makefile.
usr.sbin/zonectl/zonectl.8
zonectl(8) man page.
usr.sbin/zonectl/zonectl.c
The zonectl(8) utility. This allows managing SCSI or ATA zoned
disks via the disk_zone.h API. You can report zones, reset write
pointers, get parameters, etc.
Sponsored by: Spectra Logic
Differential Revision: https://reviews.freebsd.org/D6147
Reviewed by: wblock (documentation)
from mbuf when calculating path mtu. Remove now unused finaldst variable.
Also constify dst argument in ip6_getpmtu() and ip6_getpmtu_ctl().
Reviewed by: melifaro
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
Add more 'compatible' strings found in various LEDE DTS files.
Reviewed by: adrian
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D6432
That pops up in the rev 5xx / 6xx microcode on the later cores
(4312, 4322.) I'm not sure why this is happening yet and I'll
dig into it, but Linux b43 does the same thing.
* PMU controls the clock setup
* Correctly set idle low power handling
* Use a hard-coded powerup delay for some of the newer hardware
(including the BCM4322, which I've tested with.)
Tested:
* BCM4322, 2G + 5G STA mode
Obtained from: Linux b43 (PMU behaviour)
on a fuse mounted file system, it will crash. Although it may be
possible to make this work correctly, this patch avoids the crash
in the meantime.
I removed the MPASS(), since panicing for the FIFO case didn't make
a lot of sense when it returns an error for the others.
PR: 195000
Submitted by: henry.hu.sh@gmail.com (earlier version)
MFC after: 2 weeks
function in vnet.c move it to if.c where it logically belongs and put
it under a VNET_SYSUNINIT() call.
To not change the current behaviour make sure it runs first thing
during teardown. In the future this will allow us more flexibility
on changing the order on when we want to get rid of interfaces.
Stop exporting if_vmove() and make it file static.
Reviewed by: gnn
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6438
While looking at r300073, I noticed these incorrect comments in the context
of the diff.
Reviewed by: imp, jhb
Differential Revision: https://reviews.freebsd.org/D6431
This is set to the SI_SUB_* value before executing any VNET_SYSINIT
or VNET_SYSUNINT. While good for debugging especially VNET teardown
problems having a chance to know at which level during teardown we are,
it will also be used to identify to detcted a "stable state"
(as in fully up and running) later on.
Obtained from: projects/vnet
Sponsored by: The FreeBSD Foundation
needed in later changes where we may not be able to lock the pic list lock
to perform a lookup, e.g. from within interrupt context.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
into dyn_update_proto_state(). This allows eliminate the second state
lookup in the ipfw_install_state().
Also remove MATCH_* macros, they are defined in ip_fw_private.h as enum.
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
opened in O_SYNC mode, at least for UFS. This also handles
truncation, done due to the O_SYNC | O_TRUNC flags combination to
open(2), in synchronous way.
Noted by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Allow to deallocate previously allocated ITS device along with
its interrupts. Interrupt numbers are being freed when the last
LPI number is no longer busy.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D6351
That was both redundant as zfs_znode_sa_init() already does the job and
insufficient as the root vnode can be reached via other means.
MFC after: 1 weeks
gfs code is (almsot) completely agnostic of FreeBSD VFS locking, so it
does not handle doomed but not yet dead vnodes and may return them.
Check for those vnodes here and retry a lookup.
Note that ZFS and gfs have additional protections that ensure that a
parent vnode of the current vnode is never doomed.
The fixed problem is an occasional failure to lookup a 'snapshot' or
'shares' directories under .zfs.
Note that for the above reason all uses of zfsctl_root_lookup() are
better be replaced with VOP_LOOKUP.
MFC after: 5 weeks
I transcribed the linux ssb offsets and .. didn't pick up that our SIBA
SPROM code has an offset of 0x1000.
This fixes a bunch of odd parsing values that showed up when I tried
using a newer NIC. The NIC still doesn't yet work but now the SPROM
values are right.
Oops!
return value when it could return 1 (indicating we should stop).
Fix a few instances of pager_open() / pager_close() not being called.
Actually use these routines for the environment variable printing code
I just committed.
a slightly non-standard %S that's more useful in the UEFI environment,
so ignore printf errors. There's no good cast to use. We'll need to
revisit this in the future.
* Add the new TX/RX frame formats;
* Use the right TX/RX format based on the frame info;
* Disable the 5xx firmware check, since now it should
somewhat work (but note, we don't yet use it unless
you manually add ucode11/initvals11 from the 5.x driver
to bwn-kmod-firmware;
* Misc: update some comments/debugging now I know what's
actually going on.
Tested:
* BCM4321MC, STA mode, both 4xx and 666 firmware, DMA mode
TODO:
* The newer firmware ends up logging "warn: firmware state (0)";
not sure yet what's going on there. But, yes, it still works.
I'm committing this via a BCM4321MC, 11a station, firmware
rev 666.
Obtained from: Linux b43 (TX/RX descriptor format for 5xx)
"iflib is a library to eliminate the need for frequently duplicated device
independent logic propagated (poorly) across many network drivers."
Participation is purely optional. The IFLIB kernel config option is
provided for drivers that want to transition between legacy and iflib
modes of operation. ixl and ixgbe driver conversions will be committed
shortly. We hope to see participation from the Broadcom and maybe
Chelsio drivers in the near future.
Submitted by: mmacy@nextbsd.org
Reviewed by: gallatin
Differential Revision: D5211
- Avoid a conditional branch on the return value of sleepq_resume_thread()
by ORing its return value into the boolean wakeup_swapper. This is
consistent with other sleepqueue functions which just pass this return
value to their caller.
- sleepq_resume_thread() unconditionally removes the thread from its queue,
so there's no need to maintain a pointer to the next element in the queue.
MFC after: 2 weeks
It has no counterpart among the other lock primitives and has been a
no-op for years. Mutex consistency checks are generally done whenver
INVARIANTS is enabled.
Greatly reduce the locked instructions and reduce number of inner loops.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6404
Use vmbus softc to save vmbus per-cpu data. More stuffs will be moved
into vmbus softc.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6403
And move base channel id calculation out of inner loop. This prepares
for more event processing optimization.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D6384
remounted to writeable after initial read-only. Assign to
dev->si_mountpt earlier to account the accesses done at the mount
time.
Based on submission by: bde
MFC after: 1 week
