Commit Graph

465 Commits

Author SHA1 Message Date
imp
a336b443c3 Remove code describing pre 5.x system 2006-01-10 05:21:01 +00:00
imp
add8494ccf Remove the kernel portion of OLDCARD. I'm working on a replacement
for pccardc dumpcis, but until I'm done with that, I'm leaving pccardc
in place.  As such, I'm leaving the .h files in place for the moment.
2005-09-25 21:29:32 +00:00
nyan
7d03ad1458 Change a directory layout for pc98.
- Move MD files into <arch>/<arch>.
  - Move bus dependent files into <arch>/<bus>.
Rename some files to more suitable names.

Repo-copied by:	peter
Discussed with:	imp
2005-05-10 12:02:18 +00:00
imp
da48b1e097 Remove more deadwood that never got implemented in NEWCARD, since NEWCARD
went a different direction than was anticipated when these compatibility
shims were added.
2005-02-15 02:54:53 +00:00
imp
c4c5777dd0 Remove card_get_function. It looks like it was intended to be a
bridge between OLDCARD and NEWCARD for drivers to inquire after the
function number (eg, 0, 1, 2).  Nobody ever used it, so retire it
with honors.  NEWCARD never implemented it, and the same information
can be obtained by the pccard_get_function_number().

MFC After: 3 days
2005-02-14 07:00:39 +00:00
imp
f0bf889d0d /* -> /*- for license, minor formatting changes 2005-01-07 02:29:27 +00:00
imp
462c08381f Move PNP IDs back into oldcard files 2004-08-13 06:57:31 +00:00
phk
dfd1f7fd50 Do the dreaded s/dev_t/struct cdev */
Bump __FreeBSD_version accordingly.
2004-06-16 09:47:26 +00:00
njl
05a1f56fc9 Convert callers to the new bus_alloc_resource_any(9) API.
Submitted by:	Mark Santcroos <marks@ripe.net>
Reviewed by:	imp, dfr, bde
2004-03-17 17:50:55 +00:00
phk
ad925439e0 Device megapatch 4/6:
Introduce d_version field in struct cdevsw, this must always be
initialized to D_VERSION.

Flip sense of D_NOGIANT flag to D_NEEDGIANT, this involves removing
four D_NOGIANT flags and adding 145 D_NEEDGIANT flags.
2004-02-21 21:10:55 +00:00
phk
df397dedea Device megapatch 1/6:
Free approx 86 major numbers with a mostly automatically generated patch.

A number of strategic drivers have been left behind by caution, and a few
because they still (ab)use their major number.
2004-02-21 19:42:58 +00:00
tanimura
7eade05dfa - Implement selwakeuppri() which allows raising the priority of a
thread being waken up.  The thread waken up can run at a priority as
  high as after tsleep().

- Replace selwakeup()s with selwakeuppri()s and pass appropriate
  priorities.

- Add cv_broadcastpri() which raises the priority of the broadcast
  threads.  Used by selwakeuppri() if collision occurs.

Not objected in:	-arch, -current
2003-11-09 09:17:26 +00:00
silby
f0e686a675 Change all SYSCTLS which are readonly and have a related TUNABLE
from CTLFLAG_RD to CTLFLAG_RDTUN so that sysctl(8) can provide
more useful error messages.
2003-10-21 18:28:36 +00:00
imp
969776c958 More debug under boot verbose. 2003-08-29 23:25:00 +00:00
imp
2e072728ab Fix comment. 2003-08-29 23:24:41 +00:00
imp
81fff2b66d add debug to pcic memory mapping routine 2003-08-27 04:17:02 +00:00
imp
39e40ff7c5 Add comment point o2micro people to NEWCARD 2003-08-01 16:10:48 +00:00
imp
749a7cc7f5 OLDCARD is OBSOLETE_IN_6. Tag it as such. 2003-06-12 04:46:43 +00:00
imp
5c827309fc 1. Allow drivers to query CIS strings from OLDCARD.
2. Include backwards compatibility good for the moment (eventually will
   be turned off in current, but allow for a short transition period).

PR:	51333
Submited by: Scott Mitchell (1)
MFC after:	2 weeks
2003-04-23 23:39:21 +00:00
phk
0ae911eb0e Gigacommit to improve device-driver source compatibility between
branches:

Initialize struct cdevsw using C99 sparse initializtion and remove
all initializations to default values.

This patch is automatically generated and has been tested by compiling
LINT with all the fields in struct cdevsw in reverse order on alpha,
sparc64 and i386.

Approved by:    re(scottl)
2003-03-03 12:15:54 +00:00
imp
5058936161 pccard isn't picky about WHAT major it gets. 2003-02-28 05:56:06 +00:00
imp
683db8609b Add SMC 34C90. Not tested, but should be a no-op except for the id string.
Print the sockbase when we can't get the memory for debug.
2003-02-26 05:45:48 +00:00
imp
cf874b345d Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
alfred
b5c0015ac9 Consolidate MIN/MAX macros into one place (param.h).
Submitted by: Hiten Pandya <hiten@unixdaemons.com>
2003-02-02 13:17:30 +00:00
alfred
bf8e8a6e8f Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
imp
613881b680 Merge from P4:
o Update copyright.
o Add a tunable to allow the ti12xx to initialize the pci clock.  Some rare
  cards need it.
o rename 67xx -> 6729 since there's really only one chip in this family.
o from pcic_pci_pd6729_init call the routing code
o Fix some comments out routing on the TI-1130 class (1030, 1130 and 1131)

MFC: After RE@ says it is ok.
2003-01-04 17:26:35 +00:00
schweikh
d3367c5f5d Correct typos, mostly s/ a / an / where appropriate. Some whitespace cleanup,
especially in troff files.
2003-01-01 18:49:04 +00:00
imp
fbbf5407e1 MFp4:
Fix a bug with the 3.3V code for the ricoh bridges.  I got the bit
detect backwards.  Also, we can only detect 3.3V cards when the GPI
interrupt is disabled.  So when it is enabled assume 5.0V card.

Obtained from: NetBSD (takemura-san from patches by ngc@ff.iij4u.or.jp)
Approved by: re (blanket)
2002-11-27 06:04:49 +00:00
imp
cead6168fb MFp4: Comment about not assuming INTA# for 6729 2002-10-07 07:02:48 +00:00
imp
a18c040494 Make beep not depend on HZ setting.
PR: 25201
Submitted by: Akio Marita-san
# This is the last part of the PR uncommitted.
2002-09-29 23:41:25 +00:00
imp
84dd07c00b SMIENB not needed, but maybe PCI_CLOCK is, so put it in #if 0'd out 2002-09-29 23:37:07 +00:00
imp
0a14f466d6 Parens considered good. 2002-09-29 23:36:17 +00:00
imp
f2ab40c05e For boot verbose, print resources assigned in a more asthetically pleasing
way.

PR: 42745 (although done in a different way)
2002-09-13 16:23:41 +00:00
imp
2ea68b67d4 Change the order that we look for free memory windows from 0 -> MAX-1
to MAX-1 -> 0.  This should allow for less potential for conflict
between pccardd/pccardc and drivers.  As far as I can tell no drivers
try to use window 4, so this should be a no-op for them.
2002-09-08 22:18:06 +00:00
imp
4e41e1526d Add 16-bit before bus to keep the words card and bus apart. 2002-07-31 20:01:11 +00:00
imp
7968a1adb6 MFp4:
o reduce the extra-long ID names.
	o TI-1510, 1520 and 4510 support.
	o MFUNC is the name of the register on TI 1200 and newer chips (except
	  125x and 1450).  Initialize it in the func routine, but only
	  if NO_MFUNC isn't set.
	o better comments about above workaround
	o register definitions for MFUNC.
	o move zoom video disable to a better place.
2002-07-26 08:07:55 +00:00
imp
2442eb4edd Copy manufacturer and version string into the kernel, and copy it to
the slot info.  This brings OLDCARD's API much closer to NEWCARD and
will allow moving more information into the kernel from pccard.conf
for common drivers (ed).
2002-07-22 06:46:10 +00:00
imp
1d6ce2645d Add support for writing to mapping high memory for pccard memory
windows.  Right now we only support pci chips that are memory mapped.
These are the most common bridges in use today and will help a large
majority of the users.

I/O mapped PCI chips support this functionality in a different way, as
do some of the ISA bridges (but only when mounted on a motherboard).
These chips are not supported by this change.
2002-07-20 22:29:23 +00:00
imp
041d9c2bce minor nit in comments 2002-07-20 18:59:58 +00:00
imp
fe78a495fc Integrate the hw.pcic.pd6722_vsense tunable from the nomads list.
This allows one to select the method of 3.3V card detection from the
three possible choices (none (0), the "6710 way" (1) and the "6729
way" (2)).  The default is the 6710 way, since it works in the most
cases.  The datasheets for the 6722 suggest that the '29 way is more
correct, but experience has shown this method to cause some laptops to
hang solid.  See source code for details until I update the man page.

Submitted by: shibata-san (chiharu shibata <chi@bd.mbn.or.jp>)
2002-07-18 08:13:45 +00:00
imp
aa54e9aa16 Some strange hacks for the clpd6729:
o It needs to have pcic_isa_intr intrrupt handler
o for pci interrupts, in the func interrupt handler it needs to check the isa
  registers rather than the pci ones for card present.
o better commentary for some of the strangeness of the 6729 on pci
o fix some crunchy comments to better reflect reality.

With this I almost have the WL200 working, but an interrupt storm
after attach is causing problems for reasons unknown.  This code
doesn't seem to break the normal clpd6729 case, and I'd like others
with 6729 cards to try to test it (there were some that were used for
external pccard slots in pci only systems).
2002-07-18 08:05:00 +00:00
imp
546ed2f042 Better verbage on hw.pcic sysctls, delete now obsolete comment 2002-07-17 06:29:35 +00:00
imp
d5959a6ce3 o Remove workaround that I put in to mask the BadVcc problem.
o Add preliminary support for Cirrus Logic CL-PD6729 using PCI
  interrupts.  To use it you you need to set hw.pcic.pd6729_intr_path
  to 2.  This is allow us to still default to ISA intrrupt path for
  this part (which is found much more often in laptops using ISA IRQs).
  But some PCI cards have this part on them and this should allow them
  to be used.  It is untested on PCI, but it seems to not break the ISA
  case.
o Better sysctl descriptions (I hope).
2002-07-17 06:02:07 +00:00
imp
a8a6ea13ae Be more conservative about the address ranges we assign. Some
machines don't like the more liberal default, so be more conservative
about what we do by default.
2002-07-17 05:50:06 +00:00
imp
c6dc2b0bae Add definitions for the Ext 1 register on cirrus logic PD-6729. 2002-07-17 05:43:39 +00:00
imp
1f90b85e30 Rearrange previous commit that passed the vendor id to the kernel in a way
that's binary compatible for -stable.  While binary compatibility doesn't
matter much in -current, it is critical for -stable.  This change requires
pccardd/pccardc to be recompiled.
2002-07-14 06:47:52 +00:00
keramida
bbe7923a86 Typo: do do -> to do.
Reviewed by:	imp
2002-07-14 02:25:21 +00:00
imp
0825fa8a7f Lots of people have had to hack around the fixed address for cardbus
bridges in modern hardware (that hardware w/ lots of RAM).  Raise the
address from 0x44000000 to 0x88000000 to match what we do with
NEWCARD.  However, this really should be done in the pci layer.
2002-06-27 19:56:22 +00:00
imp
59390e1d94 Leave it to a non-native speaker of English to catch another typo: "do do" ->
"to do"

submitted by: marius@alchemy.franken.de
2002-06-27 18:16:16 +00:00
imp
309f5820ce Spell less like a 'merkin and more like a speaker of English 2002-06-27 17:59:24 +00:00