If realpath() is called on pathnames like "/dev/null/." or "/dev/null/..",
it should fail with [ENOTDIR]. Pathnames like "/dev/null/" already failed as
they should.
Also, put the check for non-directories after lstatting the previous
component instead of when the empty component (consecutive or trailing
slashes) is detected, saving an lstat() call and some lines of code.
PR: kern/82980
MFC after: 2 weeks
and finish the job. ncurses is now the only Makefile in the tree that
uses it since it wasn't a simple mechanical change, and will be
addressed in a future commit.
kqueue(2) already supports EVFILT_PROC. Add an EVFILT_PROCDESC that
behaves the same, but operates on a procdesc(4) instead. Only implement
NOTE_EXIT for now. The nice thing about NOTE_EXIT is that it also
returns the exit status of the process, meaning that we can now obtain
this value, even if pdwait4(2) is still unimplemented.
Notes:
- Simply reuse EVFILT_NETDEV for EVFILT_PROCDESC. As both of these will
be used on totally different descriptor types, this should not clash.
- Let procdesc_kqops_event() reuse the same structure as filt_proc().
The only difference is that procdesc_kqops_event() should also be able
to deal with the case where the process was already terminated after
registration. Simply test this when hint == 0.
- Fix some style(9) issues in filt_proc() to keep it consistent with the
newly added procdesc_kqops_event().
- Save the exit status of the process in pd->pd_xstat, as we cannot pick
up the proctree_lock from within procdesc_kqops_event().
Discussed on: arch@
Reviewed by: kib@
are unaware of RFC 3542 can construct control messages.
The kernel disallows mixing RFC 2292 behaviour with RFC 3542 behaviour.
Only sockets that have specifically been marked as using the RFC 2292
API can use RFC 2292 specific options. This is all good and well, but
libc itself seems inconsistent with this.
The root cause of this inconsistency seems to relate to the definitions
of IPV6_HOPOPTS and IPV6_DSTOPTS. They are defined in RFC 2292 and re-used
in RFC 3542, yet have distinct values in the kernel. It's for this reason
that the kernel also has definitions for IPV6_2292HOPOPTS and
IPV6_2292DSTOPTS. Not so in libc.
For example: some program calls inet6_option_init() (defined by RFC 2292)
with the RFC 2292 defined IPV6_HOPOPTS and IPV6_DSTOPTS. Before RFC 3542,
this was translated to values of 22 and 23 (resp.) The libc implementation
correctly checks that only options IPV6_HOPOPTS and IPV6_DSTOPTS are given
(as per RFC 2292) but since these defines have taken on the values defined
by RFC 3542 (values 49 and 50 resp,) rejects the correct option values
(22 and 23) passed said program and returns -1.
The precisie fix is to have inet6_option_init() and friends only accept the
RFC 2292 defined IPV6_HOPOPTS & IPV6_DSTOPTS, but that breaks other code
(like mld6query(8)), which seem to not be aware of RFC 3542 and how it
hi-jacked the option names. So the best fix is to accept the options from
both.
Obtained from: Juniper Networks, Inc.
MFC after: 1 week
pointer for the login name (result). Make sure to handle that
case properly. Improve robustness by checking namelen and then
nul-terminating the provided buffer to simplify subsequent logic.
Obtained from: Juniper Networks, Inc.
MFC after: 1 week
The pdfork(2) man page states:
"pdfork() returns a PID, 0 or -1, as fork(2) does."
As it returns a PID, the return type should obviously be pid_t. As int
and pid_t have the same size on all architectures, this change does not
affect the ABI in any way.
causing mb* functions (and similar) to be called with the wrong data
(possibly a null pointer, causing a crash).
PR: standards/188036
MFC after: 1 week
A bug caused the "big endian" flag to be lost when receiving a message. As a
result, the bits are interpreted as little endian and an extremely large
allocation is attempted.
This change fixes ping(8)'s communication to casperd(8) on big-endian
architectures.
Reported by: Anton Shterenlikht
Tested by: danfe
These were originally deleted as "not important" but, actually we need them
in place if we want to be able to use autoconf on software that provides
atf-based tests. (That includes being able to rebuild autotest from scratch
on the Kyua cluster machines, as the automated setup does.)
fields of a private struct such that variables of this type are
initialised correctly. Fixes conversion from ISO 2022.
Also do this in the BIG5 module to prevent similar errors in the future.
- In the libiconv module for EUC-TW replace 2^cs with 1<<cs. Fixes
conversion from EUC-TW.
- Synchronise iconv code with NetBSD. In most cases this only updates
the RCS id because the changes are already there or are NetBSD specific.
+ libc/iconv/citrus_csmapper.c: Add a comment.
+ libc/iconv/citrus_db_factory.c: Remove put16().
+ libc/iconv/citrus_iconv.c: Return EINVAL on error.
+ libc/iconv/citrus_mapper.c: Return EINVAL on error.
+ libc/iconv/citrus_memstream.c: Fix type of a variable.
+ libc/iconv/citrus_prop.h: Sync definition of _CITRUS_PROP_HINT_END.
+ libc/iconv/citrus_stdenc.c: Return EINVAL on error.
+ libiconv_modules/mapper_std/citrus_mapper_std.c: Plug memory leak.
Obtained from: NetBSD
MFC after: 2 weeks
from any context i.e., it is not required to be called from a vcpu thread. The
ioctl simply sets a state variable 'vm->suspend' to '1' and returns.
The vcpus inspect 'vm->suspend' in the run loop and if it is set to '1' the
vcpu breaks out of the loop with a reason of 'VM_EXITCODE_SUSPENDED'. The
suspend handler waits until all 'vm->active_cpus' have transitioned to
'vm->suspended_cpus' before returning to userspace.
Discussed with: grehan
all the SUBDIR entries in parallel, instead of serially. Apply this
option to a selected number of Makefiles, which can greatly speed up the
build on multi-core machines, when using make -j.
This can be extended to more Makefiles later on, whenever they are
verified to work correctly with parallel building.
I tested this on a 24-core machine, with make -j48 buildworld (N = 6):
before stddev after stddev
======= ====== ======= ======
real time 1741.1 16.5 959.8 2.7
user time 12468.7 16.4 14393.0 16.8
sys time 1825.0 54.8 2110.6 22.8
(user+sys)/real 8.2 17.1
E.g. the build was approximately 45% faster in real time. On machines
with less cores, or with lower -j settings, the speedup will not be as
impressive. But at least you can now almost max out a machine with
buildworld!
Submitted by: jilles
MFC after: 2 weeks
This targets the existing ARMv6 and ARMv7 SoCs that contain a VFP unit.
This is an optional coprocessors may not be present in all devices, however
it appears to be in all current SoCs we support.
armv6hf targets the VFP variant of the ARM EABI and our copy of gcc is too
old to support this. Because of this there are a number of WITH/WITHOUT
options that are unsupported and must be left as the default value. The
options and their required value are:
* WITH_ARM_EABI
* WITHOUT_GCC
* WITHOUT_GNUCXX
In addition, without an external toolchain, the following need to be left
as their default:
* WITH_CLANG
* WITH_CLANG_IS_CC
As there is a different method of passing float and double values to
functions the ABI is incompatible with existing armv6 binaries. To use
this a full rebuild of world is required. Because no floating point values
are passed into the kernel an armv6 kernel with VFP enabled will work with
an armv6hf userland and vice versa.
The NetBSD Foundation states "Third parties are encouraged to change the
license on any files which have a 4-clause license contributed to the
NetBSD Foundation to a 2-clause license."
This change removes clauses 3 and 4 from copyright / license blocks that
list The NetBSD Foundation as the only copyright holder.
Sponsored by: The FreeBSD Foundation
are only used on armv6 when the vfp unit is detected. They will also be
available for the upcoming armv6hf platform, however while not used by
default there will need to be defined for any software that calls them
directly.
my tests, it is faster ~20%, even on an old IXP425 533MHz it is ~45%
faster... This is partly due to loop unrolling, so the code size does
significantly increase... I do plan on committing a version that
rolls up the loops again for smaller code size for embedded systems
where size is more important than absolute performance (it'll save ~6k
code)...
The kernel implementation is now shared w/ userland's libcrypt and
libmd...
We drop support for sha256 from sha2.c, so now sha2.c only contains
sha384 and sha512...
Reviewed by: secteam@
Change {atf,plain,tap}.test.mk to be internal implementation details of
bsd.test.mk. Makefiles that build tests should now only include bsd.test.mk
and declaratively specify what they want to build, without worrying about
the internal implementation of the mk files.
The reason for this change is to permit building test programs of different
interfaces from a single directory, which is something I had a need for
while porting tests over from src/tools/regression/.
Additionally, this change makes it possible to perform some other requested
changes to bsd.test.mk in an easier manner. Coming soon.
