This debugging code printing routing table data was introduced in rS25723,
22+ years ago. The last functional commit to this code was rS67534, 19 years ago.
The code has been turned off by default all this time.
Lastly, this code directly iterates radix tree and rtentries, which is not
not a proper interaction with routing system.
Differential Revision: https://reviews.freebsd.org/D24554
The file handle affinity code was configured to be used by both the
old and new NFS servers. This no longer makes sense, since there is
only one NFS server.
This patch copies a majority of the code in sys/nfs/nfs_fha.c and
sys/nfs/nfs_fha.h into sys/fs/nfsserver/nfs_fha_new.c and
sys/fs/nfsserver/nfs_fha_new.h, so that the files in sys/nfs can be
deleted. The code is simplified by deleting the function callback pointers
used to call functions in either the old or new NFS server and they were
replaced by calls to the functions.
As well as a cleanup, this re-organization simplifies the changes
required for handling of external page mbufs, which is required for KERN_TLS.
This patch should not result in a semantic change to file handle affinity.
This NFS lock device driver was replaced by the kernel NLM around FreeBSD7 and
has not normally been used since then.
To use it, the kernel had to be built without "options NFSLOCKD" and
the nfslockd.ko had to be deleted as well.
Since it uses Giant and is no longer used, this patch removes it.
With this device driver removed, there is now a lot of unused code
in the userland rpc.lockd. That will be removed on a future commit.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D22933
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
Filesystems which want to use it in limited capacity can employ the
VOP_UNLOCK_FLAGS macro.
Reviewed by: kib (previous version)
Differential Revision: https://reviews.freebsd.org/D21427
The code in sys/nfs/nfs_lock.c has not been run by default since March 2008
when it was replaced by the in kernel sys/nlm code.
It uses Giant, so it needs to be removed before the FreeBSD 13 release.
This will happen in a couple of months, since few if any users run
the code anyhow and can easily switch to the default in kernel NFSLOCKD.
Using of rwlock with multiqueue NICs for IP forwarding on high pps
produces high lock contention and inefficient. Rmlock fits better for
such workloads.
Reviewed by: melifaro, olivier
Obtained from: Yandex LLC
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D15789
This code merge adds a pNFS service to the NFSv4.1 server. Although it is
a large commit it should not affect behaviour for a non-pNFS NFS server.
Some documentation on how this works can be found at:
http://people.freebsd.org/~rmacklem/pnfs-planb-setup.txt
and will hopefully be turned into a proper document soon.
This is a merge of the kernel code. Userland and man page changes will
come soon, once the dust settles on this merge.
It has passed a "make universe", so I hope it will not cause build problems.
It also adds NFSv4.1 server support for the "current stateid".
Here is a brief overview of the pNFS service:
A pNFS service separates the Read/Write oeprations from all the other NFSv4.1
Metadata operations. It is hoped that this separation allows a pNFS service
to be configured that exceeds the limits of a single NFS server for either
storage capacity and/or I/O bandwidth.
It is possible to configure mirroring within the data servers (DSs) so that
the data storage file for an MDS file will be mirrored on two or more of
the DSs.
When this is used, failure of a DS will not stop the pNFS service and a
failed DS can be recovered once repaired while the pNFS service continues
to operate. Although two way mirroring would be the norm, it is possible
to set a mirroring level of up to four or the number of DSs, whichever is
less.
The Metadata server will always be a single point of failure,
just as a single NFS server is.
A Plan B pNFS service consists of a single MetaData Server (MDS) and K
Data Servers (DS), all of which are recent FreeBSD systems.
Clients will mount the MDS as they would a single NFS server.
When files are created, the MDS creates a file tree identical to what a
single NFS server creates, except that all the regular (VREG) files will
be empty. As such, if you look at the exported tree on the MDS directly
on the MDS server (not via an NFS mount), the files will all be of size 0.
Each of these files will also have two extended attributes in the system
attribute name space:
pnfsd.dsfile - This extended attrbute stores the information that
the MDS needs to find the data storage file(s) on DS(s) for this file.
pnfsd.dsattr - This extended attribute stores the Size, AccessTime, ModifyTime
and Change attributes for the file, so that the MDS doesn't need to
acquire the attributes from the DS for every Getattr operation.
For each regular (VREG) file, the MDS creates a data storage file on one
(or more if mirroring is enabled) of the DSs in one of the "dsNN"
subdirectories. The name of this file is the file handle
of the file on the MDS in hexadecimal so that the name is unique.
The DSs use subdirectories named "ds0" to "dsN" so that no one directory
gets too large. The value of "N" is set via the sysctl vfs.nfsd.dsdirsize
on the MDS, with the default being 20.
For production servers that will store a lot of files, this value should
probably be much larger.
It can be increased when the "nfsd" daemon is not running on the MDS,
once the "dsK" directories are created.
For pNFS aware NFSv4.1 clients, the FreeBSD server will return two pieces
of information to the client that allows it to do I/O directly to the DS.
DeviceInfo - This is relatively static information that defines what a DS
is. The critical bits of information returned by the FreeBSD
server is the IP address of the DS and, for the Flexible
File layout, that NFSv4.1 is to be used and that it is
"tightly coupled".
There is a "deviceid" which identifies the DeviceInfo.
Layout - This is per file and can be recalled by the server when it
is no longer valid. For the FreeBSD server, there is support
for two types of layout, call File and Flexible File layout.
Both allow the client to do I/O on the DS via NFSv4.1 I/O
operations. The Flexible File layout is a more recent variant
that allows specification of mirrors, where the client is
expected to do writes to all mirrors to maintain them in a
consistent state. The Flexible File layout also allows the
client to report I/O errors for a DS back to the MDS.
The Flexible File layout supports two variants referred to as
"tightly coupled" vs "loosely coupled". The FreeBSD server always
uses the "tightly coupled" variant where the client uses the
same credentials to do I/O on the DS as it would on the MDS.
For the "loosely coupled" variant, the layout specifies a
synthetic user/group that the client uses to do I/O on the DS.
The FreeBSD server does not do striping and always returns
layouts for the entire file. The critical information in a layout
is Read vs Read/Writea and DeviceID(s) that identify which
DS(s) the data is stored on.
At this time, the MDS generates File Layout layouts to NFSv4.1 clients
that know how to do pNFS for the non-mirrored DS case unless the sysctl
vfs.nfsd.default_flexfile is set non-zero, in which case Flexible File
layouts are generated.
The mirrored DS configuration always generates Flexible File layouts.
For NFS clients that do not support NFSv4.1 pNFS, all I/O operations
are done against the MDS which acts as a proxy for the appropriate DS(s).
When the MDS receives an I/O RPC, it will do the RPC on the DS as a proxy.
If the DS is on the same machine, the MDS/DS will do the RPC on the DS as
a proxy and so on, until the machine runs out of some resource, such as
session slots or mbufs.
As such, DSs must be separate systems from the MDS.
Tested by: james.rose@framestore.com
Relnotes: yes
Defines in net/if_media.h remain in case code copied from ifconfig is in
use elsewere (supporting non-existant media type is harmless).
Reviewed by: kib, jhb
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15017
Use syscall_helper_register() to register syscalls and do it through the
module interface rather than sysinit.
This pattern is more common and easier to understand.
Reviewed by: jhb
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14232
This reduces noise when kernel is compiled by newer GCC versions,
such as one used by external toolchain ports.
Reviewed by: kib, andrew(sys/arm and sys/arm64), emaste(partial), erj(partial)
Reviewed by: jhb (sys/dev/pci/* sys/kern/vfs_aio.c and sys/kern/kern_synch.c)
Differential Revision: https://reviews.freebsd.org/D10385
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Initially, only tag files that use BSD 4-Clause "Original" license.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D13133
This change adds two new tunables, allowing to control serialization for
read and write NFS requests separately. It does not change the default
behavior since there are too many factors to consider, but gives additional
space for further experiments and tuning.
The main motivation for this change is very low write speed in case of ZFS
with sync=always or when NFS clients requests sychronous operation, when
every separate request has to be written/flushed to ZIL, and requests are
processed one at a time. Setting vfs.nfsd.fha.write=0 in that case allows
to increase ZIL throughput by several times by coalescing writes and cache
flushes. There is a worry that doing it may increase data fragmentation
on disks, but I suppose it should not happen for pool with SLOG.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
When an NFS mount is hung against an unresponsive NFS server, the "umount -f"
option can be used to dismount the mount. Unfortunately, "umount -f" gets
hung as well if a "umount" without "-f" has already been done. Usually,
this is because of a vnode lock being held by the "umount" for the mounted-on
vnode.
This patch adds kernel code so that a new "-N" option can be added to "umount",
allowing it to avoid getting hung for this case.
It adds two flags. One indicates that a forced dismount is about to happen
and the other is used, along with setting mnt_data == NULL, to handshake
with the nfs_unmount() VFS call.
It includes a slight change to the interface used between the client and
common NFS modules, so I bumped __FreeBSD_version to ensure both modules are
rebuilt.
Tested by: pho
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D11735
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
and getboottimebin(9) KPI. Change consumers of boottime to use the
KPI. The variables were renamed to avoid shadowing issues with local
variables of the same name.
Issue is that boottime* should be adjusted from tc_windup(), which
requires them to be members of the timehands structure. As a
preparation, this commit only introduces the interface.
Some uses of boottime were found doubtful, e.g. NLM uses boottime to
identify the system boot instance. Arguably the identity should not
change on the leap second adjustment, but the commit is about the
timekeeping code and the consumers were kept bug-to-bug compatible.
Tested by: pho (as part of the bigger patch)
Reviewed by: jhb (same)
Discussed with: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
X-Differential revision: https://reviews.freebsd.org/D7302
only the first one will actually work and all the others just result in
errors (which would get printed but otherwise ignored).
Instead, wait until we make a choice of which interface will be used to
mount the rootfs, and install the default route associated with it (if any).
After doing the md_mount() call to obtain the needed info, remove the
default route again, and transcribe the route info into the nfs_diskless
structure. If the system eventually chooses to mount the nfs rootfs, the
default route will be installed again when the nfs_diskless code
re-initializes the interface.
The theory here is that since we can only have one default route, the one
most likely to be correct for mounting the rootfs is the one that was
delivered along with the rootpath option.
bootp/dhcp server doesn't provide a router option. Doing so prevents
setting defaultrouter=<ip> in rc.conf (it fails because there's already
a bogus default route installed by bootpc_init).
When an admin wants to use this style of proxy arp on an interface, the
proper mechanism is to set the "use-lease-addr-for-default-route" flag
in the dhcp server config. That causes the lease address to be delivered
in the routers option, and the normal handling of the routers option will
then install the self-ip as the default route.
PR: 187094
doesn't check for errors, and all the errors that can happen result in it
calling panic anyway, except for one that's really more of a warning (and
is going to disappear on an upcoming commit anyway).
server (and not when it came from a fallback method such as the ROOTDEVNAME
option). This makes the code in bootpc_init() choose the first interface
that provided a rootpath name. Previously it was choosing the first
interface that got an IP address, which could be on a different and
potentially unreachable subnet than the server providing the rootfs.
If the rootpath name actually does come from a fallback source, then the
code continues to use the first interface in the list that got configured.
Note that this wasn't directly reported in the PR cited below, but was
discovered while working on that PR.
PR: 187094
set that mtu on the interface.
These changes are based on the patch submitted by Robert Blayzor in the
PR, but I changed things around a bit, so the blame for any mistakes
belongs to me.
PR: 187094
There are number of radix consumers in kernel land (pf,ipfw,nfs,route)
with different requirements. In fact, first 3 don't have _any_ requirements
and first 2 does not use radix locking. On the other hand, routing
structure do have these requirements (rnh_gen, multipath, custom
to-be-added control plane functions, different locking).
Additionally, radix should not known anything about its consumers internals.
So, radix code now uses tiny 'struct radix_head' structure along with
internal 'struct radix_mask_head' instead of 'struct radix_node_head'.
Existing consumers still uses the same 'struct radix_node_head' with
slight modifications: they need to pass pointer to (embedded)
'struct radix_head' to all radix callbacks.
Routing code now uses new 'struct rib_head' with different locking macro:
RADIX_NODE_HEAD prefix was renamed to RIB_ (which stands for routing
information base).
New net/route_var.h header was added to hold routing subsystem internal
data. 'struct rib_head' was placed there. 'struct rtentry' will also
be moved there soon.
option that will be added to the nfsuserd daemon in a future
commit. It modifies the cache used by NFSv4 for name<-->id
translation (both username/uid and group/gid) to support this.
When "-manage-gids" is set, the server looks up each uid
for the RPC and uses the list of groups cached in the server
instead of the list of groups provided in the RPC request.
The cached group list is acquired for the cache by the nfsuserd
daemon via getgrouplist(3).
This avoids the 16 groups limit for the list in the RPC request.
Since the cache is now used for every RPC when "-manage-gids"
is enabled, the code also modifies the cache to use a separate
mutex for each hash list instead of a single global mutex.
Suggested by: jpaetzel
Tested by: jpaetzel
MFC after: 2 weeks
which means that the NFSCLIENT and NFSSERVER
kernel options will no longer work. This commit
only removes the kernel components. Removal of
unused code in the user utilities will be done
later. This commit does not include an addition
to UPDATING, but that will be committed in a
few minutes.
Discussed on: freebsd-fs
The kernel tracks syscall users so that modules can safely unregister them.
But if the module is not unloadable or was compiled into the kernel, there is
no need to do this.
Achieve this by adding SY_THR_STATIC_KLD macro which expands to SY_THR_STATIC
during kernel build and 0 otherwise.
Reviewed by: kib (previous version)
MFC after: 2 weeks
in userland rename in-kernel getenv()/setenv() to kern_setenv()/kern_getenv().
This fixes a namespace collision with libc symbols.
Submitted by: kmacy
Tested by: make universe
This allows to slightly simplify svc_run_internal() code: if we processed
all the requests in a queue, then we know that new one will not appear.
MFC after: 2 weeks
- Use counter(9) for rt_pksent (former rt_rmx.rmx_pksent). This
removes another cache trashing ++ from packet forwarding path.
- Create zini/fini methods for the rtentry UMA zone. Via initialize
mutex and counter in them.
- Fix reporting of rmx_pksent to routing socket.
- Fix netstat(1) to report "Use" both in kvm(3) and sysctl(3) mode.
The change is mostly targeted for stable/10 merge. For head,
rt_pksent is expected to just disappear.
Discussed with: melifaro
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
Instead of taking 8 specific bytes of file handle to identify file during
RPC thread affitinity handling, use trivial hash of the full file handle.
ZFS's struct zfid_short does not have padding field after the length field,
as result, originally picked 8 bytes are loosing lower 16 bits of object ID,
causing many false matches and unneeded requests affinity to same thread.
This fix substantially improves NFS server latency and scalability in SPEC
NFS benchmark by more flexible use of multiple NFS threads.
Sponsored by: iXsystems, Inc.
Do not insert active ports into pool->sp_active list if they are success-
fully assigned to some thread. This makes that list include only ports that
really require attention, and so traversal can be reduced to simple taking
the first one.
Remove idle thread from pool->sp_idlethreads list when assigning some
work (port of requests) to it. That again makes possible to replace list
traversals with simple taking the first element.
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
other than the one specified by the BOOTP server. This configures NFS
using the BOOTP protocol while also respecting other root-path options such
as setting vfs.root.mountfrom in the environment or using the RB_DFLTROOT
boot option. It allows you to override the root path provided by the
server, or to supply a root path when the server provides IP configuration
but no root path info.
This maintains the historical BOOTP_NFSROOT behavior of panicking on a
failure to mount the root path provided by the server, unless you've
provided an alternative via the ROOTDEVNAME kernel option or by setting
vfs.root.mountfrom. The behavior of panicking when given no other options
is preserved because it amounts to a bit of a retry loop that could
eventually recover from a transient network or server problem.
The user can now override the root path from loader(8) even if the
kernel is compiled with BOOTP_NFSROOT. If vfs.root.mountfrom is set in
the environment it is used unconditionally -- it always overrides the
BOOTP info. If it begins with [old]nfs: then the BOOTP code uses it
instead of the server-provided info. If it specifies some other
filesystem then the bootp code will not panic like it used to and the code
in vfs_mountroot.c will invoke the right filesystem to do the mount.
If the kernel is compiled with the ROOTDEVNAME option, then that name is
used by the BOOTP code if either
* The server doesn't provide a pathname.
* The boothowto flags include RB_DFLTROOT.
The latter allows the user to compile in alternate path in ROOTDEVNAME
such as ufs:/dev/da0s1a and boot from that path by setting
boot_dftlroot=1 in loader(8) or using the '-r' option in boot(8).
The one thing not provided here is automatic failover from a
server-provided path to a compiled-in one without the user manually
requesting that. The code just isn't currently structured in a way that
makes that possible with a lot of rewrite. I think the ability to set
vfs.root.mountfrom and to use ROOTDEVNAME automatically when the server
doesn't provide a name covers the most common needs.
A set of patches submitted by Lars Eggert provided the part I couldn't
figure out by myself when I tried to do this last year; many thanks.
Reviewed by: rodrigc
and that can drive someone crazy. While m_get2() is young and not
documented yet, change its order of arguments to match m_getm2().
Sorry for churn, but better now than later.
