Commit Graph

121 Commits

Author SHA1 Message Date
mav
6a3018e7cf MFp4:
Introduce ATA_CAM kernel option, turning ata(4) controller drivers into
cam(4) interface modules. When enabled, this options deprecates all ata(4)
peripheral drivers (ad, acd, ...) and interfaces and allows cam(4) drivers
(ada, cd, ...) and interfaces to be natively used instead.

As side effect of this, ata(4) mode setting code was completely rewritten
to make controller API more strict and permit above change. While doing
this, SATA revision was separated from PATA mode. It allows DMA-incapable
SATA devices to operate and makes hw.ata.atapi_dma tunable work again.

Also allow ata(4) controller drivers (except some specific or broken ones)
to handle larger data transfers. Previous constraint of 64K was artificial
and is not really required by PCI ATA BM specification or hardware.

Submitted by:	nwitehorn (powerpc part)
2009-12-06 00:10:13 +00:00
mav
b54a119170 MFp4:
Do not differentiate 12/16 bytes ATAPI CCB formats when it is not needed.
2009-10-23 14:56:29 +00:00
mav
55cab290fc Revert my ata_identify()/ata_reinit() related changes: r189166, r189091
and partially r188903. Revert breaks new drives detection on reinit to the
state as it was before me, but fixes series of new bugs reported by some
people.

Unconditional queueing of ata_completed() calls can lead to deadlock if
due to timeout ata_reinit() was called at the same thread by previous
ata_completed(). Calling of ata_identify() on ata_reinit() in current
implementation opens numerous races and deadlocks.

Problems I was touching here are still exist and should be addresed, but
probably in different way.
2009-02-28 22:07:15 +00:00
mav
b342cbbd7a Rework device probing by moving ata_getparam() call from ata_identify() to
drivers' probe routines. It allows not to sleep and so not drop Giant inside
ata_identify() critical section and so avoid crash if it reentered on
request timeout. Reentering of probe call checked inside of it.

Give device own knowledge about it's type (ata/atapi/atapicam). It is not
a good idea to ask channel status for device type inside ata_getparam().

Add softc memory deallocation on device destruction.
2009-02-28 11:25:05 +00:00
mav
d6b23ce153 Teach device drivers' ata_reinit() methods, that there can be more then two
devices per channel.
2009-02-21 16:39:26 +00:00
imp
f2d1b16468 Fix shutdown routine to return 0 and change signature from void return
to int.
2009-02-04 20:26:27 +00:00
grehan
1bdc8efe15 Fix panic and breakage for non-DMA ATA devices e.g. powermac macio cells.
Handle cases where dma function pointers may be NULL, and where
the max_iosize can't be derived from a DMA data structure. For
the latter, revert to the prior behaviour of using DFLTPHYS for
the max i/o size when there is no other data.

Reviewed by:		marcel
No objection by:	sos
2008-05-08 17:55:44 +00:00
sos
b11f9dd52a Go back to preallocating everything possible on init.
This avoids calling busdma in the request processing path which caused a traumatic performance degradation.
Allocation has be postponed to after we know how many devices we possible can have on portmulitpliers to save some space.
2008-04-17 12:29:35 +00:00
sos
e7012ad330 Fix the brokenness in the former commit, sorry for the mess.
The problem is that the PM support is part of a much larger WIP here, but due to popular demand I decided to get some of it imported.

Also I forgot the mention:

HW sponsored by: Vitsch Electronics / VEHosting
2008-04-11 11:30:27 +00:00
sos
34ad230814 Add experimental support for SATA Port Multipliers
Support is working on the Silicon Image SiI3124/3132.
Support is working on some AHCI chips but far from all.

Remember this is WIP, so test reports and (constructive) suggestions are welcome!
2008-04-10 13:05:05 +00:00
sos
2350167451 Dont fumble the ivars on reinit, avoids panic on suspend/resume om some systems that looses thier devices.
Patch by: jhb@
2007-11-19 21:11:26 +00:00
sos
bcf58d1f0e Update copyright headers. 2007-02-21 19:07:19 +00:00
marcel
819c015bdb In afd_describe(), don't initialize sizestring. On ia64, gcc(1) will
generate code that calls memset, which we don't have in the kernel.

MFC after: 3 days
2006-03-30 05:29:57 +00:00
sos
c1d9ed7049 Properly use the sense key info 2006-03-18 13:14:38 +00:00
sos
d987f74f35 Bail out of afd_sense if ENODEV. 2006-03-08 09:21:48 +00:00
sos
0c7a140bbc Poll device for readiness before trying to get geometry etc. 2006-03-07 16:05:38 +00:00
sos
ca50acdfb4 Update atapi-fd to support direct devices such as disks. 2006-03-05 20:30:54 +00:00
sos
0371a67ccd Get rid of the advertising clause in the copyright. 2006-01-05 21:27:19 +00:00
rwatson
be4f357149 Normalize a significant number of kernel malloc type names:
- Prefer '_' to ' ', as it results in more easily parsed results in
  memory monitoring tools such as vmstat.

- Remove punctuation that is incompatible with using memory type names
  as file names, such as '/' characters.

- Disambiguate some collisions by adding subsystem prefixes to some
  memory types.

- Generally prefer lower case to upper case.

- If the same type is defined in multiple architecture directories,
  attempt to use the same name in additional cases.

Not all instances were caught in this change, so more work is required to
finish this conversion.  Similar changes are required for UMA zone names.
2005-10-31 15:41:29 +00:00
sos
05399c3127 Change the way ioctls are issue to ATA.
The most prominent part is that its now possible to issue ata_requests
directly to say acd0, instead of going through the cumbersome /dev/ata
device.
2005-05-16 13:07:27 +00:00
sos
859b992e3d Take newbusification one step further, ie use the device_t more consequently
all way through the code down the layers, instead of the mix'n'match that
resulted from the conversion done earlier.

Sponsored by:	pair.com
2005-04-30 16:22:07 +00:00
sos
b22bb8078c Move the creation of ata_channel child devices to the channel code.
This allows to attach to the children (ATA devices) even without a
driver being attached. This allows atapi-cam to do its work both
with and without the pure ATAPI driver being present.

ATA patches by /me
ATAPI-cam pathes by Thomas
2005-04-15 10:20:52 +00:00
sos
372caa3813 Change the ata_* methods to use a channel device instead of a
controller device. This helps when there is no controller parent
to a channel (PPC port).
2005-03-31 15:05:40 +00:00
sos
f820cdfe29 This is the much rumoured ATA mkIII update that I've been working on.
o       ATA is now fully newbus'd and split into modules.
        This means that on a modern system you just load "atapci and ata"
        to get the base support, and then one or more of the device
        subdrivers "atadisk atapicd atapifd atapist ataraid".
        All can be loaded/unloaded anytime, but for obvious reasons you
        dont want to unload atadisk when you have mounted filesystems.

o       The device identify part of the probe has been rewritten to fix
        the problems with odd devices the old had, and to try to remove
        so of the long delays some HW could provoke. Also probing is done
	without the need for interrupts, making earlier probing possible.

o       SATA devices can be hot inserted/removed and devices will be created/
        removed in /dev accordingly.
	NOTE: only supported on controllers that has this feature:
	Promise and Silicon Image for now.
	On other controllers the usual atacontrol detach/attach dance is
	still needed.

o	Support for "atomic" composite ATA requests used for RAID.

o       ATA RAID support has been rewritten and and now supports these
        metadata formats:
                 "Adaptec HostRAID"
                 "Highpoint V2 RocketRAID"
                 "Highpoint V3 RocketRAID"
                 "Intel MatrixRAID"
                 "Integrated Technology Express"
                 "LSILogic V2 MegaRAID"
                 "LSILogic V3 MegaRAID"
                 "Promise FastTrak"
                 "Silicon Image Medley"
		 "FreeBSD PseudoRAID"

o       Update the ioctl API to match new RAID levels etc.

o       Update atacontrol to know about the new RAID levels etc
        NOTE: you need to recompile atacontrol with the new sys/ata.h,
        make world will take care of that.
	NOTE2: that rebuild is done differently from the old system as
	the rebuild is now done piggybacked on read requests to the
	array, so atacontrol simply starts a background "dd" to rebuild
	the array.

o       The reinit code has been worked over to be much more robust.

o       The timeout code has been overhauled for races.

o	Support of new chipsets.

o       Lots of fixes for bugs found while doing the modulerization and
        reviewing the old code.

Missing or changed features from current ATA:

o       atapi-cd no longer has support for ATAPI changers. Todays its
        much cheaper and alot faster to copy those CD images to disk
        and serve them from there. Besides they dont seem to be made
        anymore, maybe for that exact reason.

o       ATA RAID can only read metadata from all the above metadata formats,
	not write all of them (Promise and Highpoint V2 so far). This means
	that arrays can be picked up from the BIOS, but they cannot be
	created from FreeBSD. There is more to it than just the missing
	write metadata support, those formats are not unique to a given
	controller like Promise and Highpoint formats, instead they exist
	for several types, and even worse, some controllers can have
	different formats and its impossible to tell which one.
	The outcome is that we cannot reliably create the metadata of those
	formats and be sure the controller BIOS will understand it.
	However write support is needed to update/fail/rebuild the arrays
	properly so it sits fairly high on the TODO list.

o       So far atapicam is not supported with these changes. When/if this
	will change is up to the maintainer of atapi-cam so go there for
	questions.

HW donated by:  Webveveriet AS
HW donated by:  Frode Nordahl
HW donated by:  Yahoo!
HW donated by:  Sentex
Patience by:	Vife and my boys (and even the cats)
2005-03-30 12:03:40 +00:00
sos
54e7375090 Add firmware revision to probe printf. 2004-08-05 21:11:33 +00:00
sos
166655f4a8 Use the right ordering of args on mtx_init(). No functional changes
since the args in question was all zero's.

Found by: Jimmy Olgeni <olgeni@FreeBSD.org>
2004-06-22 11:18:25 +00:00
sos
16b335106f Remember to mtx_destroy mutexes. 2004-03-01 13:17:07 +00:00
phk
49c92e5706 Change the disk(9) API in order to make device removal more robust.
Previously the "struct disk" were owned by the device driver and this
gave us problems when the device disappared and the users of that device
were not immediately disappearing.

Now the struct disk is allocate with a new call, disk_alloc() and owned
by geom_disk and just abandonned by the device driver when disk_create()
is called.

Unfortunately, this results in a ton of "s/\./->/" changes to device
drivers.

Since I'm doing the sweep anyway, a couple of other API improvements
have been carried out at the same time:

The Giant awareness flag has been flipped from DISKFLAG_NOGIANT to
DISKFLAG_NEEDSGIANT

A version number have been added to disk_create() so that we can detect,
report and ignore binary drivers with old ABI in the future.

Manual page update to follow shortly.
2004-02-18 21:36:53 +00:00
sos
3678d31f17 Use the biotask functionality in GEOM to put finished requests on
instead of taskqueue_swi. This shaves from 1 to 10% of the overhead.

Overhaul the locking once more, there was a few possible races that
are now closed.
2004-01-28 20:38:51 +00:00
sos
894449cd93 Use UMA instead of plain malloc for getting ATA request storage.
This gives +10% performance on simple tests, so definitly worth it.
A few percent more could be had by not using M_ZERO'd alloc's, but
we then need to clear fields all over the place to be safe, and
that was deemed not worth the trouble (and it makes life dangerous).
2004-01-14 21:26:35 +00:00
sos
58a7725eaf Always return ENOMEM if ata_request_alloc fails so GEOM can dtrt. 2004-01-12 09:33:10 +00:00
sos
d6c0154728 Overhaul of the timeout/reinit framework. This should clear up most
of the leftovers from the old version that really doesn't work anymore.

Add a reset function for host-end of the ATA channel. This is needed
for the SiI3112 in order to whack it back to reality if a device
locks up the SATA interface (thereby preventing that we can reset the
device). The result is that ATA now recovers from the timeouts that
happens with the SiI3112A and more or less all disks based on old
PATA electronics with a Marvell PATA->SATA converter. This includes
lots of the popular SATA dongles and the WDC Raptor disks..
2004-01-11 22:08:34 +00:00
sos
ebe00702c0 Centralise mode setting. Instead of doing it in all subdrivers, do
it in ata-all.c where it belongs.

Prime controller HW by always setting PIO mode first in attach.
2003-11-11 14:55:36 +00:00
sos
1c87c82d4e Unify prototypes.
Cosmetics.
2003-08-25 09:01:49 +00:00
obrien
c63dab466c Use __FBSDID().
Also some minor style cleanups.
2003-08-24 17:55:58 +00:00
sos
acd43345e5 This is a major rework of the ATA driver (ATAng)
Restructure the way ATA/ATAPI commands are processed, use a common
ata_request structure for both. This centralises the way requests
are handled so locking is much easier to handle.

The driver is now layered much more cleanly to seperate the lowlevel
HW access so it can be tailored to specific controllers without touching
the upper layers. This is needed to support some of the newer
semi-intelligent ATA controllers showing up.

The top level drivers (disk, ATAPI devices) are more or less still
the same with just corrections to use the new interface.

Pull ATA out from under Gaint now that locking can be done in a sane way.

Add support for a the National Geode SC1100. Thanks to Soekris engineering
for sponsoring a Soekris 4801 to make this support.

Fixed alot of small bugs in the chipset code for various chips now
we are around in that corner anyways.
2003-08-24 09:22:26 +00:00
phk
c235e25328 Use bioq_flush() to drain a bio queue with a specific error code.
Retain the mistake of not updating the devstat API for now.

Spell bioq_disksort() consistently with the remaining bioq_*().

#include <geom/geom_disk.h> where this is more appropriate.
2003-04-01 15:06:26 +00:00
phk
e01fc931cf Centralize the devstat handling for all GEOM disk device drivers
in geom_disk.c.

As a side effect this makes a lot of #include <sys/devicestat.h>
lines not needed and some biofinish() calls can be reduced to
biodone() again.
2003-03-08 08:01:31 +00:00
phk
7324f4d690 NO_GEOM cleanup:
Convert to "struct disk *" centric API.

OK'ed by:	sos
2003-02-28 09:53:36 +00:00
phk
9aa946589d NO_GEOM cleanup:
Change the argument to disk_destroy() to be the same struct disk * as
disk_create() takes.

This enables drivers to ignore the (now) bogus dev_t which disk_create()
returns.
2003-02-21 15:13:26 +00:00
sos
93c9b5f5d1 First round off updates/fixes to the ATA driver.
This moves all chipset specific code to a new file 'ata-chipset.c'.
Extensive use of tables and pointers to avoid having the same switch
on chipset type in several places, and to allow substituting various
functions for different HW arch needs.
Added PIO mode setup and all DMA modes.
Support for all known SiS chipsets. Thanks to Christoph Kukulies for
sponsoring a nice ASUS P4S8X SiS648 based board for this work!

Tested on:	i386, PC98, alpha and sparc64
2003-02-20 20:02:32 +00:00
phk
837e7af52d NO_GEOM cleanup: retire disk_invalidate() 2003-01-30 19:43:50 +00:00
sos
71edc5e4eb Add support for the PC98 platform to the ATA driver.
This mostly consists of functionality to serialize accesses to
the two ATA channels (which can also be used to "fix" certain
PCI based controllers).
Add support for Acard controllers.
Enable the ATA driver in PC98 GENERIC, and add device hints.
Update man page with latest support.

The PC98 core team has kindly provided me with a PC98
machine that made this all possible, thanks to all that
contributed to that effort, without that this would
probably newer have been possible..

Approved by: re@
2002-12-03 20:20:44 +00:00
phk
57a346a213 (This commit touches about 15 disk device drivers in a very consistent
and predictable way, and I apologize if I have gotten it wrong anywhere,
getting prior review on a patch like this is not feasible, considering
the number of people involved and hardware availability etc.)

If struct disklabel is the messenger: kill the messenger.

Inside struct disk we had a struct disklabel which disk drivers used to
communicate certain metrics to the disklayer above (GEOM or the disk
mini-layer).  This commit changes this communication to use four
explicit fields instead.

Amongst the benefits is that the fields do not get overwritten by
wrong or bogus on-disk disklabels.

Once that is clear, <sys/disk.h> which is included in the drivers
no longer need to pull <sys/disklabel.h> and <sys/diskslice.h> in,
the few places that needs them, have gotten explicit #includes for
them.

The disklabel inside struct disk is now only for internal use in
the disk mini-layer, so instead of embedding it, we malloc it as
we need it.

This concludes (modulus any mistakes) the series of disklabel related
commits.

I belive it all amounts to a NOP for all the rest of you :-)

Sponsored by:   DARPA & NAI Labs.
2002-09-20 19:36:05 +00:00
sos
830c1b765c OK, dont rely on the upper layers handling iosize_max correctly,
instead rely on ATAPI devices ability to do the work instead.

MFC material.
2002-07-28 23:59:00 +00:00
sos
a1d998a806 Properly change the block_size on different CD media, and use that
to calculate the max amount of data in one IO request.

Correct the max size on atapi floppies/tapes as well.
2002-07-27 12:22:39 +00:00
sos
df31474864 Fix the max transfer size for ATAPI devices. The spec says to
transfer at most 65534 bytes, thats 126 times DEV_BSIZE not 252 :(

Pointed out by: Ian Dowse <iedowse@maths.tcd.ie>
2002-07-26 19:13:05 +00:00
sos
e3199ef943 Fix the transfer size calculation. 2002-07-22 18:37:33 +00:00
sos
d4bc2d8833 Use si_iosize_max to tell the upper layers not to use more
than 32K chunks on ZIP drives instead of deblocking it in
the driver.
2002-06-19 12:41:05 +00:00
bde
9b3a249b6b Fixed printf format errors which apparently crept in while -Wformat was
disabled for gcc-3.
2002-05-25 11:18:03 +00:00