(32 and 64-bit, LE and BE).
The changes were tested with QEMU's 'mips' target.
Most of the implementation was lifted from the ARM version, the appropriate
MIPS-specific things were implemented.
With these changes I am able to go all the way through the u-boot->ubldr->kernel
boot chain in QEMU on all combinations of bit-ness and endian-ness.
For the tests I've used FAT32 disk images (as FAT32 is supported by U-boot),
which include /boot/kernel/kernel and /boot/kernel/ubldr.bin
In U-boot I do:
fatload ide 0 <LOAD_ADDR> /boot/kernel/ubldr.bin; go <LOAD_ADDR>
where LOAD_ADDR is 80800000 for 32-bit and ffffffff80800000 for 64-bit
Then it's the usual ubldr that takes over and loads and starts a kernel.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5313
ubldr.
The changes are mostly dealing with removing unnecessary casts from the U-Boot
API (we're passing only pointers, no obvious reason to cast them to uint32_t),
cleaning up some compiler warnings and using the proper printf format
specifiers in order to be able to compile cleanly for both 32-bit and 64-bit
MIPS targets.
Reviewed by: imp
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5312
translate directly into calls to their namesake API functions in
libvmmapi.
It is an improvement over the existing setreg(), setmsr(), setcr()
setgdt() and exec() callbacks in that the new additions give full
control and don't assume we're booting FreeBSD, like exec() and
don't assume one only wants to set the value of RSP, like setreg().
sys/boot/fdt/Makefile
sys/boot/uboot/fdt/Makefile
sys/boot/uboot/lib/Makefile
This causes compilation issues on MIPS due to trying to link PIC with non-PIC
code. This revision includes bsd.stand.mk in the above files.
Reviewed by: imp
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5311
Although this may not be an issue in practice, it would be more correct if the 64-bit version was used. Also, using the 64-bit version would make it easier to add support for 64-bit ubldr on MIPS.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D5310
The HDMI driver will attach a framebuffer device when a display is
connected. If the EDID can be read and contains a preferred mode, it
will be used. Otherwise the framebuffer will default to 800x600.
In addition, if the EDID contains a CEA-861 extension block and the
"basic audio" flag is set, audio playback at 48kHz 16-bit stereo is
enabled on the controller.
Reviewed by: andrew
Approved by: gonzo (mentor)
Differential Revision: https://reviews.freebsd.org/D5383
These are no longer needed after the recent 'beforebuild: depend' changes
and hooking DIRDEPS_BUILD into a subset of FAST_DEPEND which supports
skipping 'make depend'.
Sponsored by: EMC / Isilon Storage Division
Tested on Spike simulator with 2 and 16 cores (tlb enabled),
so set MAXCPU to 16 at this time.
This uses FDT data to get information about CPUs
(code based on arm64 mp_machdep).
Invalidate entire TLB cache as it is the only way yet.
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
import it into the loader(8) env as dhcp.root-path, so that it overrides
any dhcp/bootp server-provided path.
Now if you have a dhcp server available you can easily net-boot a u-boot
system even if you don't control the dhcp server config, by setting just
two variables in the u-boot env:
loaderdev=net
rootpath=<nfsserverip>:<pathname>
Previously you had to either accept all the dhcp parameters from the
server without the ability to locally provide the rootpath, or you had
to forego dhcp and set more vars (ipaddr, netmask, serverip, rootpath).
configuration from the FDT data, then set the pins into the requested
state. As part of this the gpio controller now reports the correct number
of pins instead of returning the number of bank * 32.
To allow for a future consolidated kernel we add the SOC_ALLWINNER_A10 and
SOC_ALLWINNER_A20 kernel options. These need to be set as appropriate for
the SoC the kernel will boot on.
Submitted by: Emmanuel Vadot <manu@bidouilliste.com>
Differential Revision: https://reviews.freebsd.org/D5177
A10/A20 SoC. Based loosely on the submitters NetBSD driver, tested on
Cubieboard 2. Playback and capture are supported.
Submitted by: Jared McNeill <jmcneill@invisible.ca>
Differential Revision: https://reviews.freebsd.org/D5202
dts files. It may be removed once it will be fixed upstream.
This is done just to supresses a warning during dtb evaluation as
there is no elm driver in tree at present.
least the audio codec driver currently in review.
Submitted by: Jared McNeill <jmcneill@invisible.ca>
Differential Revision: https://reviews.freebsd.org/D5050
o Add kernel configuration for QEMU.
Both SPIKE and QEMU kernel configs are temporary (until
we will be able to obtain DTB from loader).
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
* Use the Linux compat string
* Use EARLY_DRIVER_MODULE to attach at the right time
* Add a generic A10 kernel config file
* A20 now use generic_timer
* Add two new dts files for Olimex boards
* Update our custom DTS file for A10 and A20 to use the same compatible
property names as the vendor ones.
Submitted by: Emmanuel Vadot <manu@bidouilliste.com>
Differential Revision: https://reviews.freebsd.org/D4792
copyin and copyout code handle virtual addresses such that they will take
a virtual address and convert it into a valid physical address. It may
also mean we fail to boot as the elf files load address could be 0.
Sponsored by: ABT Systems Ltd
so will access data from an unrelocated address. This is only needed for
self relocating code on ARMv7, however this is true for both ubldr and
loader.efi, the only two loaders we support on ARMv7.
While here also force the fpu to be none as is done in libstand.
Sponsored by: ABT Systems Ltd
stores to clear it.
While here reduce the alignment of the data from 4k to 16 byte aligned.
This should be more than enough, without wasting too much space.
Sponsored by: ABT Systems Ltd
While the later is a better random generator than the former, the main
reason of the change is that random() has a better chance to work with
libstand(3).
At this time we don't include random number generators in bootforth
so this has no effect.
in boot1, like is normally done. When a keyboard appears in the UEFI
device tree, assume -D -h, just like on a BIOS boot.
# It is unclear if an ACPI keyboard appearing in the tree means there's
# a real keyboard or not. A USB keyboard doesn't seem to appear unless
# it is really there.
Differential Revision: https://reviews.freebsd.org/D5223
I previously disconnected kgzdr based on a misunderstanding.
I'd still like to transition to supporting only the loader(8)-based
boot path for handling compressed kernels, but that can follow the
standard deprecation procedure.
This reverts r291113.
Requested by: dteske
This causes boot from external media (installer USB image) to mount / from
the default ZFS BE, rather than the USB device.
Reported by: kmoore
MFC after: 5 days
Sponsored by: ScaleEngine Inc.
With warnings now enabled some plaforms where failing due to warnings.
* Fix st_size printed as a size_t when its actually an off_t.
* Fix pointer conversion in load_elf for some 32bit platforms due to 64bit
off in ef.
MFC after: 2 days
X-MFC-With:
Sponsored by: Multiplay
Fix EFI boot support when presented with multiple valid boot partitions
across multiple devices.
It now prefers to boot from partitions that are present on the underlying
device that the boot1 image was loaded from. This means that it will boot
from the partitions on device the user chose from EFI boot menu in
preference to those on other devices.
Also fixed is the recovery from a failed attempt to boot, from a seemingly
valid partition, by continuing to trying all other available partitions
no matter what the error.
boot1 now use * to signify a partition what was accepted from the preferred
device and + otherwise.
Finally some error messages where improved and DPRINTF's with slowed boot
to aid debugging.
ZFS will still be preferred over UFS when both are available on the boot
device.
Reviewed by: imp
MFC after: 1 week
Sponsored by: Multiplay
Differential Revision: https://reviews.freebsd.org/D5108
to open the device in exclusive mode as, without this, the firmware may
also be reading packets off the interface leading to a race.
Reviewed by: emaste
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D4132
This is the final step required allowing to compile and to run RISC-V
kernel and userland from HEAD.
RISC-V is a completely open ISA that is freely available to academia
and industry.
Thanks to all the people involved! Special thanks to Andrew Turner,
David Chisnall, Ed Maste, Konstantin Belousov, John Baldwin and
Arun Thomas for their help.
Thanks to Robert Watson for organizing this project.
This project sponsored by UK Higher Education Innovation Fund (HEIF5) and
DARPA CTSRD project at the University of Cambridge Computer Laboratory.
FreeBSD/RISC-V project home: https://wiki.freebsd.org/riscv
Reviewed by: andrew, emaste, kib
Relnotes: Yes
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
Differential Revision: https://reviews.freebsd.org/D4982
make it possible for efi_console to recognize and translate box characters
on i386 build (unsigned versus signed char passed as int issue).
Submitted by: Toomas Soome <tsoome at me.com>
Reviewed by: emaste, smh, dteske
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D4993
hate adding yet another define, but it is the lessor of the evil
choices available. Kill another evil by removing PATH_BOOT3 and
replacing it with PATH_LOADER or PATH_LOADER_ZFS as appropriate.
PR: 206659
boot1 to pass in files with newlines in them. Now that the EFI loader
groks foo=bar on the command line, this can allow a more general setup
than traditional boot loader args will allow.
Differential Revision: https://reviews.freebsd.org/D5038
Simple bus space stubs require the VA-PA mapping
to be identical.
Approved by: hselasky, cognet (mentor)
Differential revision: https://reviews.freebsd.org/D4314
Remove old header from the include list and declare extern symbol
for delay() function.
Approved by: hselasky, cognet (mentor)
Differential revision: https://reviews.freebsd.org/D5012
When processing loader.conf if console contained an entry for an unsupported
console then cons_set would return an error refusing to set any console.
This has two side effects:
1. Forth would throw a syntax error and stop processing loader.conf at that
point.
2. The value of console is ignored.
#1 Means other important loader.conf entries may not be processed, which is
clearly undesirable.
#2 Means the users preference for console aren't applied even if they did
contain valid options. Now we have support for multi boot paths from a
single image e.g. bios and efi mode the console preference needs to deal
with the need to set preference for more than one source.
Fix this by:
* Returning CMD_OK where possible from cons_set.
* Allowing set with at least one valid console to proceed.
Reviewed by: allanjude
MFC after: 1 week
Sponsored by: Multiplay
Differential Revision: https://reviews.freebsd.org/D5018
EFI was mixing caching in two separate places causing issues when multiple
partitions where tested.
Eliminate this by removing fsstat and re-factoring fsread into fsread_size,
adding basic parameter validation.
Also:
* Enhance some error print outs.
* Fix compilation under UFS1_ONLY and UFS2_ONLY
* Use sizeof on vars instead of structs.
* Add basic parameter validation to fsread_size.
MFC after: 1 week
X-MFC-With: r293268
Sponsored by: Multiplay
Differential Revision: https://reviews.freebsd.org/D4989
The .text, .bss, and .data sections claimed 16-byte alignment, but were
only aligned to 8 by the linker script.
Discovered with elfcopy(1) from elftoolchain, which performs validation
absent from the binutils strip(1). ELF tool chain ticket #512.
Reported by: brooks
Reviewed by: brooks
Sponsored by: DARPA, AFRL
Invalid (in FreeBSD) definition of PCI controller was
replaced with another one, working in FreeBSD environment.
PCI controller's entry had to move from its parent node
so as to be recognized properly by FBSD.
PCI was enabled in kernel configuration file.
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4379
uart_dev_ns8250 now relies on compatible property instead of additional
'busy-detect' cell. All drivers with compatible = "snps,dw-apb-uart" have
busy detection turned on. DTS files of devices affected by the change
were modified and 'busy-detect' property was removed.
Reviewed by: andrew, ian, imp
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4218
Ranges property of 'soc' node used two-cell addresses which resulted in
casting errors as simplebus resource allocation works with 32-bit u_long
variables. FDT ranges were simplified.
Reviewed by: imp
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Michal Stanek <mst@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4212
This commit introduces initial support for Marvell Armada38x platform.
Changes:
- Add common DTS files for Armada38x SoCs and DTS file for A388-GP
- Add ARMADA38X kernel configuration
- Add option SOC_MV_ARMADA38X and set MV_PCI_PORTS
- Add list of files to compile
- Implement get_tclk(), get_sar_value(), cpu_reset() functions
- Add CPU ID and SoC numbers
- Correct ifdefs in arm/mv/timer.c
Reviewed by: ian, imp
Obtained from: Semihalf
Sponsored by: Stormshield
Submitted by: Michal Stanek <mst@semihalf.com>
Differential revision: https://reviews.freebsd.org/D4210
This builds on the modular EFI loader support added r294060 adding a
module to provide ZFS boot support on EFI systems.
It should be noted that EFI uses a fixed size memory block for all
allocations performed by the loader so it may be necessary to tune this
size.
For example when building an image which uses mfs_root e.g. mfsbsd, adding
the following to /etc/make.conf would be needed to prevent EFI from running
out of memory when loading the mfs_root image.
EFI_STAGING_SIZE=128
Submitted by: Eric McCorkle
MFC after: 2 weeks
X-MFC-With: r293268
Sponsored by: Multiplay
Make EFI boot loader modular in preparation for adding ZFS support.
This is a partial commit of the D4515.
Submitted by: Eric McCorkle
Reviewed by: emaste (in part)
MFC after: 2 weeks
X-MFC-With: r293268
Sponsored by: Multiplay
Differential Revision: https://reviews.freebsd.org/D4515
The boot code fsread was caching the result of meta data request and
reusing it even for calls with inode = 0, which is used to partitions
trigger a probe.
The result was that success was incorrectly returned for all partition
probes after the first valid success, even for partitions which are not
UFS.
MFC after: 2 weeks
X-MFC-With: r293268
Sponsored by: Multiplay
Fix compiler warnings about dropping const qualifier by changing file_loadraw
name param to const, and updating method to make that the case (it was
abusing the variable).
MFC after: 2 weeks
X-MFC-With: r293268
Sponsored by: Multiplay
Silence a bogus compiler warning about indexing past the end of dn_bonus.
The ZFS code ensures this is not possible but the compiler can't determine
this so added an additional check to prevent this warning.
Sponsored by: Multiplay
As the in-tree GCC does not support __attribute__((ms_abi)) EFI can only
be built with Clang.
The EFI loader and boot1 validated this, but unused libefi was still built
causing issues under GCC after warnings where enabled by r293724.
Disable building all of EFI when the selected compiler is GCC.
MFC after: 2 weeks
X-MFC-With: r293268
Sponsored by: Multiplay
Disable some compiler warnings for GCC (non-standard compiler) fixing
build failures introduced by r293724, which enabled WARNS in the EFI boot
code, when compiling with none standard compiler (GCC).
Raised by: ian
MFC after: 2 weeks
X-MFC-With: r293268
Sponsored by: Multiplay
Non-interactive forth command errors where silent even for critical issues
e.g. failing to load a required kernel module or mfs_root.
This resulted in later unexplained and hard to trace errors such as mount
root failures.
This introduces additional command return codes that are treated
appropriately by the non-interactive command processor (bf_command).
* CMD_CRIT = print error
* CMD_FATAL = panic
Also fix minor style(9) issues with command_load return codes.
MFC after: 2 weeks
X-MFC-With: r293268
Sponsored by: Multiplay
infinitely less buggy than code that is theoretically correct in some
alternate universe.
The uintfptr_t type is apparently a freebsd invention, and exists only when
compiling the kernel. It's a little hard to say for sure, since it doesn't
seem to be documented anywhere except in email advice to unsuspecting and
overly-trusting souls, who then get to wear the pointy hat for blindly
following advice without investigating or testing it first.
because rounding down cannot increase the number of bits needed to express
the result.
I had no idea there was such a thing as uintfptr_t.
Requested by: bde
Set WARNS if not set for EFI boot code and fix the issues highlighted by
setting it.
Most components are set to WARNS level 6 with few being left at lower
levels due to the amount of changes needed to fix at higher levels.
Error types fixed:
* Missing / invalid casts
* Missing inner structs
* Unused vars
* Missing static for internal only funcs
* Missing prototypes
* Alignment changes
* Use of uninitialised vars
* Unknown pragma (intrinsic)
* Missing types etc due to missing includes
* printf formatting types
Reviewed by: emaste (in part)
MFC after: 2 weeks
X-MFC-With: r293268
Sponsored by: Multiplay
Differential Revision: https://reviews.freebsd.org/D4839
member secsz was a uint16_t
sys/boot/zfs/zfs.c has a probe args structure member, secsz, that is a
uint16_t for media sector size; it is used as an argument for ioctl()
at line 484. however, this ioctl writes 32 bits of data (u_int *) and
therefore this ioctl will overwrite and corrupt 16 bits of memory.
other use cases seem to use correct u_int type for secsz.
PR: 204358
Submitted by: Toomas Soome <tsoome at me.com>
Reviewed by: asomers, delphij, smh
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D4811
When called to early, new_currdev->d_type was not yet set
zfs_fmtdev() would then return null
While here, guard call to init_zfs_bootenv with if d_type == DEVT_ZFS
Reported by: tsoome at me.com
MFC after: 3 days
Sponsored by: ScaleEngine Inc.
Remove the printf("Not ufs\n") from the boot code which was hidden by the
local printf implementations, allowing these to have that code removed too.
MFC after: 2 weeks
X-MFC-With: r293268
Sponsored by: Multiplay
ARM and i386 already required libstand so switch to using it for all
patforms, allowing the removal of custom print and memory methods.
This is also a pre-cursor to enabling WARNS which highlighted a number
of issues with the removed methods.
MFC after: 2 weeks
X-MFC-With: r293268
Sponsored by: Multiplay
Add a few other safeguards to ensure things do not break when the
boot device cannot be determined
Reported by: flo
MFC after: 3 days
Sponsored by: ScaleEngine Inc.
Userboot's copy of the libstand Makefile had more extensive changes
compared to the one in sys/boot/libstand32, but it turns out these are
not intentional and we can just include lib/libstand/Makefile as done
for libstand32 in r293040.
Reviewed by: imp, jhb
Tested by: allanjude
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D4793
r279533 increased the boot1 size from 64k to 128k but didn't regenerate the
fat templates, hence the change was never activated.
With recent and upcoming changes the efi boot1 binary is now > 64k.
To avoid fat corruption in the created boot images regenerate the
templates to activate the boot1 size increase.
MFC after: 2 weeks
X-MFC-With: r293268
This is based on the vidconsole implementation.
Submitted by: Toomas Soome <tsoome@me.com>
Reviewed by: adrian
MFC after: 2 weeks
Relnotes: Yes
Differential Revision: https://reviews.freebsd.org/D4797
a problem on 32-bit systems which have ram occupying the end of the physical
address space -- for example, a block of ram at 0x80000000 with a size of
0x80000000 was overflowing 32 bit math and ending up with a calculated size
of zero.
This is a fix for one of the two problems mentioned in the PR. Something
similar will need to be done on the kernel side before the PR is closed.
PR: 201614
providing compiled-in static environment data that is used instead of any
data passed in from a boot loader.
Previously 'env' worked only on i386 and arm xscale systems, because it
required the MD startup code to examine the global envmode variable and
decide whether to use static_env or an environment obtained from the boot
loader, and set the global kern_envp accordingly. Most startup code wasn't
doing so. Making things even more complex, some mips startup code uses an
alternate scheme that involves calling init_static_kenv() to pass an empty
buffer and its size, then uses a series of kern_setenv() calls to populate
that buffer.
Now all MD startup code calls init_static_kenv(), and that routine provides
a single point where envmode is checked and the decision is made whether to
use the compiled-in static_kenv or the values provided by the MD code.
The routine also continues to serve its original purpose for mips; if a
non-zero buffer size is passed the routine installs the empty buffer ready
to accept kern_setenv() values. Now if the size is zero, the provided buffer
full of existing env data is installed. A NULL pointer can be passed if the
boot loader provides no env data; this allows the static env to be installed
if envmode is set to do so.
Most of the work here is a near-mechanical change to call the init function
instead of directly setting kern_envp. A notable exception is in xen/pv.c;
that code was originally installing a buffer full of preformatted env data
along with its non-zero size (like mips code does), which would have allowed
kern_setenv() calls to wipe out the preformatted data. Now it passes a zero
for the size so that the buffer of data it installs is treated as
non-writeable.
libstand is built in three places (lib/libstand, sys/boot/libstand32,
and sys/boot/userboot/libstand). Reduce Makefile duplication by
.including libstand/Makefile from sys/boot/libstand32/Makefile.
sys/boot/userboot/libstand/Makefile will be addressed later, as it
contains additional differences yet to be handled.
This change also switches libstand32 to use the new uuid_from_string
and uuid_to_string, which was not included in r292473.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D4747
If the system was booted with ZFS, a new menu item (#7) appears
It contains an autogenerated list of ZFS Boot Environments
This allows the user to switch to an alternate root file system
Use Cases:
- Revert a failed upgrade
- Concurrently run different versions of FreeBSD with common home directory
- Easier integration with the sysadmin/beadm utility
Requested by: many
Reviewed by: dteske
MFC after: 10 days
Relnotes: yes
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D3167
Thinking this through, and looking at process_assignment, I believe
moving the code would be wrong considering that set_conf_files is
called in one condition while set_nextboot_conf is guarded by a
different condition of having nextboot_enable="YES". So these must
stay separated and not combined.
MFC after: 1 week
Fix erroneous error path in error messages when processing boot_conf.
Fixup stack comments for functions introduced by SVN r97201.
Remove a questioning stack comment introduced by SVN r186789.
NB: Comment removed because strdup usage here is correct/not a leak.
MFC after: 1 week
empty ldvar (which amounts to the varname string starting with '=') into
the if block that manipulates ldvar, which avoids later referencing ldvar
when it was never initialized.
Submitted by: Thomas Skibo
Pointy hat: ian
magic number to use V86_CY() instead. These should have been fixed as
part of the cleanup in r226746 but were missed.
The md5 sums of the object files were unchanged, so there should be no
functional change.
PR: 205424
Submitted by: Alexander Kuleshov <kuleshovmail@gmail.com>
MFC after: 1 week
i386 is the only current FreeBSD architecture that ever used a.out
format.
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D4687
Examine each cmdline arg and if it contains an '=' convert it to ascii and
pass it to putenv(). This allows var=value settings to come in on the
command line.
This will allow overriding dhcp server-provided data in loader(8), as
discussed in PR 202098
PR: 202098
Differential Revision: https://reviews.freebsd.org/D4561
EFI return values set the high bit to indicate an error. The log
messages changed here are printed only in the case of an error,
so including the error bit is redundant. Also switch to decimal to
match the error definitions (in sys/boot/efi/include/efierr.h).
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
If ExitBootServices fails due to a changed efi_mapkey then GetMemoryMap
must be called again. In this case it is also possible for the memory
map to grow, so repeat the initial GetMemoryMap call to fetch the new
size.
Also roll bi_add_efi_data_and_exit into bi_load_efi_data as there's no
need for it to be a separate function.
PR: 202455
Reported by: Berislav Purgar <bpurgar@gmail.com>
Tested by: Berislav Purgar <bpurgar@gmail.com>
Reviewed by: kib
MFC after: 1 week
MFC with: r292338
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D4621
EFI return values set the high bit to indicate an error. The log
messages changed here are printed only in the case of an error,
so including the error bit is redundant. Also switch to decimal to
match the error definitions (in sys/boot/efi/include/efierr.h).
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
pxeboot in tftp loader mode (when built with LOADER_TFTP_SUPPORT) now
prefix all the path to open with the path obtained via the option 'root-path'
directive.
This allows to be able to use the traditional content /boot out of box. Meaning
it now works pretty much like all other loaders. It simplifies hosting hosting
multiple version of FreeBSD on a tftp server.
As a consequence, pxeboot does not look anymore for a pxeboot.4th (which was
never provided)
Note: that pxeboot in tftp loader mode is not built by default.
Reviewed by: rpokala
Relnotes: yes
Sponsored by: Gandi.net
Differential Revision: https://reviews.freebsd.org/D4590
The EFI memory map may change before or during the first
ExitBootServices call. In that case ExitBootServices returns an error,
and GetMemoryMap and ExitBootServices must be retried.
Glue together calls to GetMemoryMap(), ExitBootServices() and storage of
(now up-to-date) MODINFOMD_EFI_MAP metadata within a single function.
That new function - bi_add_efi_data_and_exit() - uses space previously
allocated in bi_load_efi_data() to store the memory map (it will fail if
that space is too short). It handles re-calling GetMemoryMap() once to
update the map key if necessary. Finally, if ExitBootServices() is
successful, it stores the memory map and its header as MODINFOMD_EFI_MAP
metadata.
ExitBootServices() calls are now done earlier, from within arch-
independent bi_load() code.
PR: 202455
Submitted by: Ganael LAPLANCHE
Reviewed by: kib
MFC after: 2 weeks
Relnotes: Yes
Differential Revision: https://reviews.freebsd.org/D4296
directly into a loader (and thus kernel) env var, using the syntax
ubenv import ldvarname=ubvarname
Without the varname= prefix it uses the historical behavior of importing
to the name uboot.ubvarname.
When we are detecting a partition table and didn't find PMBR, try to
read backup GPT header from the last sector and if it is correct,
assume that we have GPT.
Reviewed by: rpokala
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D4282
This is not properly respecting WITHOUT or ARCH dependencies in target/.
Doing so requires a massive effort to rework targets/ to do so. A
better approach will be to either include the SUBDIR Makefiles directly
and map to DIRDEPS or just dynamically lookup the SUBDIR. These lose
the benefit of having a userland/lib, userland/libexec, etc, though and
results in a massive package. The current implementation of targets/ is
very unmaintainable.
Currently rescue/rescue and sys/modules are still not connected.
Sponsored by: EMC / Isilon Storage Division
Previous value was not enough on Arndale platform.
Reviewed by: hselasky
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: Juniper Networks Inc.
Differential Revision: https://reviews.freebsd.org/D4145
During cv_wait we may be waiting for an event triggered by callout.
Run callbacks here to avoid code blocking.
Reviewed by: hselasky
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: Juniper Networks Inc.
Differential Revision: https://reviews.freebsd.org/D4144
The initial IOCTL implementation supports reading disk physical
geometry.
Two additional functions were added. They allow reading/writing raw
data to the disk (default partition).
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: Juniper Networks Inc.
Differential Revision: https://reviews.freebsd.org/D4143
The detach function is called very often, for example from
get_capacity function. We don't want to loose any pointers
here, so disable detaching for umass driver.
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: Juniper Networks Inc.
Differential Revision: https://reviews.freebsd.org/D4141
The PA adress must be gathered from an aligned VA,
not the RAW pointer to the memory space.
Reviewed by: hselasky
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: Juniper Networks Inc.
Differential Revision: https://reviews.freebsd.org/D4140
Tracking these leads to situations where meta mode will consider the
file to be out of date if /bin/sh or /bin/ln are newer than the source
file. There's no reason for meta mode to do this as make is already
handling the rebuild dependency fine.
Sponsored by: EMC / Isilon Storage Division
No behavioral changes, just cosmetics.
A partition number of zero is not a wildcard, it's the 'a' partition in
a BSD slice, so don't print it as "<auto>". (Only slices are 1-based,
unit and partition numbers are 0-based and -1 is their wildcard marker.)
Also, after doing all the probing and choosing, print the final result as
"Booting from <disk spec>" where disk spec has all the wildcards resolved
and looks like familiar BSD slice-and-partition notation (disk0s3a, etc).
This was [re-]added in r127458 (apparently with disconnected history as well)
and never connected to the build.
It is no longer relevant for modern systems from the past 20 years.
Discussed with: jhb
Sponsored by: EMC / Isilon Storage Division
Zybo needs its own DTB and has a different PHY, so add it to
the base kernel. Details on building bootable SD images at
http://www.thomasskibo.com/zedbsd/
Submitted By: Thomas Skibo
the temporary file to vers.c at the end of the script
The previous logic wrote out to vers.c multiple times, so the file
could be incorrectly interpreted as being completely written out
after one of the echo calls with recursive make, when in reality it
was only partially written.
Also, in the event the build was interrupted when creating vers.c
(small race window), it would have a leftover file that needed to
be cleaned up before resuming the build.
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
bytes of boot2. Since we're in 16-bit mode, we can't copy all 128kB at
once; instead we loop four times and copy 32 kB each time.
This change was made necessary by an upcoming increase in the size of the
boot2 binary; should it increase further, the COPY_BLKS value can be
adjusted without anyone needing to remember 8086 assembly language again.
Requested by: allanjude
Tested by: allanjude
MFC after: 1 week
hold the kernel, modules, and any other loaded data. This memory block
is relocated to the kernel's expected location during the transfer of
control from the loader to the kernel.
The GENERIC kernel on amd64 has recently grown such that a kernel + zfs.ko
no longer fits in the default staging size. Bump the default size from
32MB to 48MB to provide more breathing room.
PR: 201679
Reviewed by: imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D3666
no option but to use the smbios information to fill in the blanks.
It's a good thing UGA is a protocol of the past and GOP has all the
info we need.
Anyway, the logic has been tweaked a little to get the easier bits
of information up front. This includes the resolution and the frame
buffer address. Then we look at the smbios information and define
expected values as well as the missing bits (frame buffer offset and
stride). If the values obtained match the expect values, we fill in
the blanks and return. Otherwise we use the existing detection logic
to figure it out.
Rename the environment variables from uga_framebuffer abd uga_stride
to hw.efifb.address and hw.efifb.stride. The latter names are more
in line with other variable names.
We currently have hardcoded settings for:
1. Mid-2007 iMac (iMac7,1)
2. Late-2007 MacBook (MacBook3,1)
striking a delicate balance between exhaustive searching and
banking on assumptions. The environment variables can be used
as a fall-back anyway. With this change, all known and tested
Macs with only UGA should have a working console out of the
box... for now...
in the frame buffer when we flip pixels. Allow the detection
to be bypassed by setting the uga_framebuffer and uga_stride
variables. The kernel console works fine even when we can't
detect pixel changes in the frame buffer, which indicates
that the problem could be with reading from the frame buffer
and not writing to it.
PCI BARs does not necessarily correspond to the upper-left
most pixel. Scan the frame buffer for which byte changed
when changing the pixel at (0,0).
Use the same technique to determine the stride. Except for
changing the pixel at (0,0), we change the pixel at (0,1).
PR: 202730
Tested by: hartzell (at) alerce.com
so they were disabled during DTS transition. Though there are
no standard devices/drivers on them people might use iic(4) userland
interface to access these buses.
command called 'uga' to show whether UGA is implemented by the
firmware and what the settings are. It also includes filling
the efi_fb structure from the UGA information when GOP isn't
implemented by the firmware.
Since UGA does not provide information about the stride, we
set the stride to the horizontal resolution. This is likely
not correct and we should determine the stride by trial and
error. For now, this should show something on the console
rather than nothing.
Refactor this file to maximize code reuse.
PR: 202730
command has the following sub-commands:
list - list all possible modes (paged)
get - return the current mode
set <mode> - set the current mode to <mode>
Go ahead and defined -D_STANDALONE for all targets (only strictly
needed for some architecture, but harmless on those it isn't required
for). Also add -msoft-float to all architectures uniformly rather
that higgley piggley like it is today.
Differential Revision: https://reviews.freebsd.org/D3496
"fdt_file" and "fdtfile" U-Boot variables. Add one more check for
"fdt_file" loader(8) variable.
loader(8) variable takes precedence over u-boot env one
like RPI-B and RPI-2.
Description of problem:
USB transfers can process data in their callbacks sometimes causing
unacceptable latency for other USB transfers. Separate BULK completion
callbacks from CONTROL, INTERRUPT and ISOCHRONOUS callbacks, and give
BULK completion callbacks lesser execution priority than the
others. This way USB audio won't be interfered by heavy USB ethernet
usage for example.
Further serve USB transfer completion in a round robin fashion,
instead of only serving the most CPU hungry. This has been done by
adding a third flag to USB transfer queue structure which keeps track
of looping callbacks. The "command" callback function then decides
what to do when looping.
MFC after: 2 weeks
There have been .local version of each for user modifications for some time
This allows users to receive future updates to these files
PR: 183765
Submitted by: Bertram Scharpf, Nikolai Lifanov (patch)
Reviewed by: dteske, loos, eadler
Approved by: bapt (mentor)
MFC after: 1 month
Relnotes: yes
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D3176
For example, without this patch, the following three lines
in /boot/loader.conf would result in /boot/root.img being preloaded
twice, and two md(4) devices - md0 and md1 - being created.
initmd_load="YES"
initmd_type="md_image"
initmd_name="/boot/root.img"
Reviewed by: marcel@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3204
but it's hard to find and easy to miss.
Reviewed by: wblock@
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3183
The UEFI loader on the 10.1 release install disk (disc1) modifies an
existing EFI_DEVICE_PATH_PROTOCOL instance in an apparent attempt to
truncate the device path. In doing so it creates an invalid device
path.
Perform the equivalent action without modification of structures
allocated by firmware.
PR: 197641
MFC After: 1 week
Submitted by: Chris Ruffin <chris.ruffin@intel.com>
The Allwinner SoC has an AHCI device on its internal main bus rather
than the PCI bus. This SoC is somewhat underdocumented, and its SATA
controller is no exception. The methods to support this chip were
harvested from the Linux Allwinner SDK, and then constants invented to
describe what's going on based on low-level constants contained in the
SATA standard and guess work.
This SoC requires a specific AHCI channel setup in order to start the
operations on the channel properly.
Clock setup and AHCI channel setup idea came from NetBSD.
Tested on Cubieboard 2 and Banana pi (and attachment on Cubieboard by
Pratik Singhal).
Differential Revision: https://reviews.freebsd.org/D737
Submitted by: imp
Reviewed by: imp, ganbold, mav, andrew
- Add prototype for boot2 main()
- Don't make assignment within if statement, split it into two.
No functional or binary change -- verified with sha256(1).
MFC after: 2 weeks
function, which is expected to set returned env to NULL upon reaching the end
of the environment list but fails to do so in certain cases. The respective
u-boot code looks like the following (HEAD at the time of this commit):
--- api.c ---
496 static int API_env_enum(va_list ap)
...
510 *next = last;
511
512 for (i = 0; env_get_char(i) != '\0'; i = n + 1) {
513 for (n = i; env_get_char(n) != '\0'; ++n) {
514 if (n >= CONFIG_ENV_SIZE) {
515 /* XXX shouldn't we set *next = NULL?? */
516 return 0;
517 }
518 }
-------------
The net result is that any unfortunate user of the loader's ub_env_enum()
function hitting this condition would be trapped in the infinite loop, as
the main use pattern of ub_env_enum() is basically the following:
while ((env = ub_env_enum(env)) != NULL) { DO STUFF }
Which would stuck forever with the last element.
fails to properly consider memory regions when the loader is
located below of those regions or engulfs their lower limit. This
results in "not enough RAM to load kernel" panic, which is totally
bogus. On top of that, there are some variables that can be left
unitialized in those cases, which might cause it fail with memory
access violation instead of panic while trying to load kernel to
a wrong or non-existing address of memory.
Augment the code to properly deal with the loader being below or
at the lower bound of the memory region in question. Also, don't
leave ununitialized variables behind.
Reviewed by: ian
- Add driver for TDA19988 HDMI framer
- Add simple interface to communicate with HDMI sink: read EDID and set videomode
- Add event-based API to notify LCD controller when HDMI sink is available
- Add HDMI framer node and add refernce to it to lcdc node. This part of
DTS tree is custom and does not match Linux DTS because Linux uses
combination of pseudo-node in DTS and hardcoded driver information
that does not map to our model.
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
A hole block pointer can be encountered at any level and the hole
can cover multiple data blocks, but we are reading the data blocks
one by one, so we care only about the current one.
PR: 199804
Reported by: Toomas Soome <tsoome@me.com>
Submitted by: Toomas Soome <tsoome@me.com> (earlier version)
Tested by: Toomas Soome <tsoome@me.com>
MFC after: 11 days
Additionally, sort all real filesystems before the virtual ones.
Differential Revision: https://reviews.freebsd.org/D2709
Reviewed by: grehan
MFC after: 5 days
based device.
Following u-boot commands allow FreeBSD boot on
Yiyate Android TV Box (aml8726-m3):
tv open 480p
mmc rescan 0
fatload mmc 0 0x80100000 kernel.bin
go 0x80100000
The current FreeBSD driver doesn't program the video
clocks so the u-boot tv command is necessary in order
for the frame buffer to be useful (otherwise it can
be skipped).
The SD card for the Yiyate Android TV Box doesn't need
anything special beyond creating a FAT16 and a UFS
filesystem.
Differential Revision: https://reviews.freebsd.org/D2636
Submitted by: John Wehle
files to vendor-provided ones. It should make easier to adopt platform
code to new revisions of hardware and to use DTS overlays for various
Beaglebone extensions (shields/capes).
Original dts filenames were not changed, they're now wrappers over dts
files provided by TI. So make sure you update .dtb files on your
devices as part of kernel update
GPIO addressing was changed: instead of one global /dev/gpioc0 there
are per-bank instances of /dev/gpiocX. Each bank has 32 pins so for
instance pin 121 on /dev/gpioc0 in old addressing scheme is now pin 25
on /dev/gpioc3
On Pandaboard serial console devices was changed from /dev/ttyu0 to
/dev/ttyu2 so you'll have to update /etc/ttys to get login prompt
on serial port in multiuser mode. Single user mode serial console
should work as-is
Differential Revision: https://reviews.freebsd.org/D2146
Reviewed by: rpaulo, ian, Michal Meloun, Svatopluk Kraus
This is based on the patch sent by Alexander Fedorov with the following
fixes/improvements:
- Better error handling;
- Clock is derived from PLL6 (obtained from netbsd);
- No more unnecessary busy loops on interrupt handler;
- style(9) fixes and code cleanup.
I also want to thanks Martin Galvan who has sent an alternative
implementation with some interesting fixes.
Tested on CubieBoard2, Banana-Pi (thanks to netgate!) and Cubieboard1
(Pratik Singhal).
This is intended to pave the way for the upcoming GSoC work (and make
easier the build of images for the supported boards).
PR: 196081
Submitted by: Alexander Fedorov <alexander.fedorov@rtlservice.com>
determined at runtime so there's no need to set the values in
each DTS.
Tested on YYHD18 (aml8726-m3), VSATV102 (aml8726-m6), and
ODROIDC1 (aml8726-m8b).
Differential Revision: https://reviews.freebsd.org/D2588
Submitted by: John Wehle
interface open continuously instead of closing it after each filesystem
access and reopening it before the next (causing it to re-obtain network
params each time). This vastly speeds up netbooting.
it from the uboot net_init() implementation. The routine uses the standard
U-Boot env vars plus a freebsd-specific variable named "rootpath" (the
corresponding u-boot variable for that would be "bootfile" except that it
refers to ubldr, so a new name was needed to communicate the path to ubldr).
This allows ubldr to load a kernel from nfs without requiring a dhcp or
bootp server to provide the server ip and rootpath parameters.
than bootp and rarp.
The code which splits a serverip:/rootpath string into rootip and a plain
pathname is now a separate net_parse_rootpath() function that can be
called by others. The code that sets the kernel env vars needed for
nfs_diskless is moved into net_open() so that the variables get set no
matter where the params came from.
There was already code in net_open() that allowed for the possibility that
some other entity has set up the network-related global variables. It uses
the rootip variable as the key, assuming that if it is set all the other
required variables are set too. These changes don't alter the existing
behavior, they just make it easier to actually write some new code to get
the params from another source (such as the U-Boot environment).
Previously, ubldr would use the virtual addresses in the elf headers by
masking off the high bits and assuming the result was a physical address
where the kernel should be loaded. That would sometimes discard
significant bits of the physical address, but the effects of that were
undone by archsw copy code that would find a large block of memory and
apply an offset to the source/dest copy addresses. The result was that
things were loaded at a different physical address than requested by the
higher code layers, but that worked because other adjustments were applied
later (such as when jumping to the entry point). Very confusing, and
somewhat fragile.
Now the archsw copy routines are just simple copies, and instead
archsw.arch_loadaddr is implemented to choose a load address. The new
routine uses some of the code from the old offset-translation routine to
find the largest block of ram, but it excludes ubldr itself from that
range, and also excludes If ubldr splits the largest block of ram in
two, the kernel is loaded into the bottom of whichever resulting block is
larger.
As part of eliminating ubldr itself from the ram ranges, export the heap
start/end addresses in a pair of new global variables.
This change means that the virtual addresses in the arm kernel elf headers
now have no meaning at all, except for the entry point address. There is
an implicit assumption that the entry point is in the first text page, and
that the address in the the header can be turned into an offset by masking
it with PAGE_MASK. In the future we can link all arm kernels at a virtual
address of 0xC0000000 with no need to use any low-order part of the
address to influence where in ram the kernel gets loaded.
The Alpine Platform-On-Chip offers multicore processing
(quad ARM Cortex-A15), 1/10Gb Ethernet, SATA 3, PCI-E 3,
DMA engines, Virtualization, Advanced Power Management and other.
This code drop involves basic platform support including:
SMP, IRQs, SerDes, SATA. As of now it is missing the PCIe support.
Part of the functionality is provided by the low-level code (HAL)
delivered by the chip vendor (Annapurna Labs) and is a subject to
change in the future (is planned to be moved to sys/contrib directory).
The review log for this commit is available here:
https://reviews.freebsd.org/D2340
Reviewed by: andrew, ian, imp
Obtained from: Semihalf
Sponsored by: Annapurna Labs
static-linked to run at a fixed position, is still installed to maintain
compatibility with existing configurations. The makefile now also creates
and installs ubldr.bin, a stripped binary (no elf headers) with an entry
point offset of 0 that can be loaded by u-boot at any address and launched
with "go ${loadaddr}".
To use ubldr.bin, U-Boot must still be built with the CONFIG_API option,
but no longer needs the CONFIG_ELF option.
return a value.
Despite what I said in my prior commit, it turns out this one platform
was checking the return value from the old self-reloc code (which returned
a hard-coded 0).
The function was defined as taking 4 parameters and returning EFI_STATUS,
but all existing callers (in asm code) passed only two parameters and don't
use the return value. The function signature now matches that usage, and
doesn't refer to efi-specific types.
Parameters and variables now use the cannonical typenames set up by elf.h
(Elf_Word, Elf_Addr, etc) instead of raw C types. Hopefully this will
prevent suprises as new platforms come along and use this code.
The function was renamed from _reloc() to self_reloc() to emphasize its
difference from the other elf relocation code found in boot/common.
Differential Revision: https://reviews.freebsd.org/D2490
The commit from r279799 missed the adaptation of md_load in
sparc64/loader/main.c. This resulted in Memory Address Align issues at the
early boot stage.
Tested on a netbooted Fire 120.
a text file with a list of physical memory addresses to exclude, and have it
loaded at boot time via the provided example in loader.conf. The tunable
'vm.blacklist' remains, but using an external file means that there's no
practical limit to the size of the list. This change also improves the
scanning algorithm for processing the list, scanning the list only once
instead of scanning it for every page in the system. Both the sysctl and
the file can be unsorted and contain duplicates so long as each entry is
numeric (decimal or hex) and is separated by a space, comma, or newline
character. The sysctl 'vm.page_blacklist' is now provided to report what
memory locations were successfully excluded.
Reviewed by: imp, emax
Obtained from: Netflix, Inc.
MFC after: 3 days
The 'pwr' LED is connected to GPIO pin 35 (active high) and the 'act' LED
is connected to GPIO pin 47 (active high).
Remove the GPIO pin 47 from reserved pins list, previously it was used to
signaling the SD Card presence and now it is used by act LED.
This should be a non-functional change. A future change should
address the functional differences between these three and converge
on a single source.
Differential Revision: https://reviews.freebsd.org/D2058
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
A new loader.conf(5) option of geom_eli_passphrase_prompt="YES" will now
allow you to enter your geli(8) root-mount credentials prior to invoking
the kernel.
See check-password.4th(8) for details.
Differential Revision: https://reviews.freebsd.org/D2105
Reviewed by: imp, kmoore
Discussed on: -current
MFC after: 3 days
X-MFC-to: stable/10
Relnotes: yes
x86 symlink on i386 and amd64. Before this incorrect symlinks were being
created on armi and i386.
Differential Revision: https://reviews.freebsd.org/D2283
Reviewed by: emaste, imp
Sponsored by: The FreeBSD Foundation
