r333175 (multicast changes) exposed a bug where
mxge was not checking to see if the driver was being
unloaded while handing ioctls that touch hardware.
As a result, now that in6m_disconnect() is run from
an async gtaskq, it was busy-waiting in mxge_send_cmd()
while the mcast list was destroyed.
Also replace numbered list with - bulleted so the list entries do not
need to be renumbered as tasks are completed.
Sponsored by: The FreeBSD Foundation
It's likely that the header was needed in the past for swi(9).
But now that code does not use swi(9) or any other interfaces defined
in sys/interrupt.h.
MFC after: 1 week
On FDT-enabled platforms check if DTB blob has MAC address configured by
a boot loader. This information passed as a "local-mac-address" or
"mac-address" property of the device node. For USB NICs node
can be found by looking for compatibility string "usbVVV,PPP" where
VVV - vendor id (hex) and PPP - product id (hex)
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D16117
- Add tracker argument to preemptible epochs
- Inline epoch read path in kernel and tied modules
- Change in_epoch to take an epoch as argument
- Simplify tfb_tcp_do_segment to not take a ti_locked argument,
there's no longer any benefit to dropping the pcbinfo lock
and trying to do so just adds an error prone branchfest to
these functions
- Remove cases of same function recursion on the epoch as
recursing is no longer free.
- Remove the the TAILQ_ENTRY and epoch_section from struct
thread as the tracker field is now stack or heap allocated
as appropriate.
Tested by: pho and Limelight Networks
Reviewed by: kbowling at llnw dot com
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D16066
this function and that we aren't supposed to be controlled by the first
if() conditional. Found with gcc.
No functional change is intended with this commit.
Found with gcc.
sys/dev/ata/chipsets/ata-siliconimage.c: In function 'ata_cmd_ch_attach':
sys/dev/ata/chipsets/ata-siliconimage.c:187:5:
warning: this 'if' clause does not guard... [-Wmisleading-indentation]
if (ctlr->chip->cfg2 & SII_INTR)
^~
sys/dev/ata/chipsets/ata-siliconimage.c:190:2:
note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'if'
ch->flags |= ATA_NO_ATAPI_DMA;
work when called by members of the 'operator' group. They are already
allowed to eg power off the system (via suid shutdown(8)), so they
might as well be permitted to suspend it.
Tested by: xmj@
Reviewed by: delphij@
MFC after: 2 weeks
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D16062
lock order reversal: (sleepable after non-sleepable)
1st 0xfffffe00357ff538 xnb_softc (xen netback softc lock) @ /usr/src/sys/dev/xen/netback/netback.c:1069
2nd 0xffffffff81fdccb0 intrsrc (intrsrc) @ /usr/src/sys/x86/x86/intr_machdep.c:224
There's no need to hold the lock since the cleaning of the interrupt
cannot happen in parallel due to the XNBF_IN_SHUTDOWN flag being set.
Note that the locking in netback needs some improvement or
clarification.
While there also remove a double newline.
Sponsored by: Citrix Systems R&D
To workaround buggy firmware that sets this flag when there's actually
a VGA present.
Reported and tested by: Yasuhiro KIMURA <yasu@utahime.org>
Sponsored by: Citrix Systems R&D
Reviewed by: kib
Differential revision: https://reviews.freebsd.org/D16003
than assigning spigen device names in order of creation, this uses a device
name that corresponds to the owning spibus and chip-select index.
Example: /dev/spigen0.1 would be a child of spibus0, and use cs = 1
The intent is for systems like Raspberry Pi to have a consistent way of
using an SPI interface with a specific cs value from a user application.
Otherwise, there is no consistent way of knowing which cs pin will be
assigned to a particular spigen device. The alternative is to specify
everything in "the right order" in an overlay file, which is less than
ideal. Additionally, this duplicates (to some extent) the way Linux handles
a similar situation with their 'spidev' device, so it would be somewhat
familiar to those who also use Linux.
A new kernel config option, SPIGEN_LEGACY_CDEVNAME, causes the driver to
also create /dev/spigenN device name aliases, with N incrementing in the
order of device instantiation. This is provided to ease the transition
for existing systems using the original naming convention (particularly
when these changes are MFC'd to stable branches).
Differential Revision: https://reviews.freebsd.org/D15301
Without a call to check_free_callbacks() clients waiting for grant
references would not be woken up even when there are sufficient grant
references available.
The check was likely left out as a mistake when the function was first
added.
Note that other functions used to free grant references already call
check_free_callbacks.
Submitted by: pratyush
Reviewed by: royger
Differential review: https://reviews.freebsd.org/D15899
Summary: In order to use cpufreq(4), a dev.cpu attachment must be created. If
the IBM property is found denoting SMT, attach only to the first thread setup,
so that a cpufreq device can bind.
Reviewed by: nwhitehorn
Differential Revision: https://reviews.freebsd.org/D15921
The veriexec device features the following ioctl commands:
VERIEXEC_ACTIVE
Activate veriexec functionality
VERIEXEC_DEBUG_ON
Enable debugging mode and increment or set the debug level
VERIEXEC_DEBUG_OFF
Disable debugging mode
VERIEXEC_ENFORCE
Enforce veriexec fingerprinting (and acitvate if not already)
VERIEXEC_GETSTATE
Get current veriexec state
VERIEXEC_LOCK
Lock changes to veriexec meta-data store
VERIEXEC_LOAD
Load veriexec fingerprint if secure level is not raised (and passes the
checks for VERIEXEC_SIGNED_LOAD)
VERIEXEC_SIGNED_LOAD
Load veriexec fingerprints from loader that supports signed manifest
(and thus we can be more lenient about secure level being raised.)
Fingerprints can be loaded if the meta-data store is not locked. Also
securelevel must not have been raised or some fingerprints must have
already been loaded, otherwise it would be dangerous to allow loading.
(Note: this assumes that the fingerprints in the meta-data store at
least cover the fingerprint loader.)
Reviewed by: jtl
Obtained from: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D8561
can time out if it's backed up due to a non-stop deluge of PAUSE frames
from a misbehaving peer. Detect this situation and toggle MPS TxEn
to allow forward progress.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Add macros for R12A_RXDMA_PRO register (descriptions were seen in the
RTL8822B vendor driver) and merge 2 r21au_init_burstlen() copies.
No functional change intended.
Update the driver to use iflib in order to bring performance,
maintainability, and (hopefully) stability benefits to the driver.
The driver currently isn't completely ported; features that are missing:
- VF driver (ixlv)
- SR-IOV host support
- RDMA support
The plan is to have these re-added to the driver before the next FreeBSD release.
Reviewed by: gallatin@
Contributions by: gallatin@, mmacy@, krzysztof.galazka@intel.com
Tested by: jeffrey.e.pieper@intel.com
MFC after: 1 month
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D15577
Add a few intermediate casts to intptr_t to suppress "cast to pointer
from integer of different size" warnings from gcc. In this case, the
'arg2' part of SYSCTL_HANDLER_ARGS is used to pass in a pointer, via an
intermediate intmax_t, so no information is lost.
Reviewed by: avg
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D15725
For most regulators, the regulator_stop() method can be transformed to
regulator disable. But, in some cases, we needs to maintain shared data
across multiple regulators (e.g. single GPIO pin which works as enable
for multiple regulates). In this case, the implementation of regulator
should perform his own enable counting therefore it is necessary to
distinguish between the regulator enable/disable method (which
increments/decrements enable counter for shared resource) and regulator
stop method (which don't affect it).
So:
- add regnode_stop() method to regulator framework and default it to
regnode_enable(..., false, ...)
- implement it in regulator_fixed with proper enable counting.
While I'm in, also fix handling of always_on property. If any of regulators
sharing same GPIO pin have it enabled, then none of them can disable regulator.
Tested by: kevans
MFC after: 3 weeks
of descriptors processed. Add the ability to gather a certain maximum
number of frames in the driver's rx before waking up netmap rx. If
there aren't enough frames then netmap rx will be woken up as usual.
hw.cxgbe.nm_rx_nframes
Sponsored by: Chelsio Communications
Summary:
Newer OPAL device trees, such as those on POWER9 systems, use 'pciex' for
device_type, not 'pci'. Rather than enumerating all possible variants, just
check for a 'pci' prefix.
Reviewed by: nwhitehorn, breno.leitao_gmail.com
Differential Revision: https://reviews.freebsd.org/D15817
The driver assumes the list can change (even though it does't right now)
and queries it every time the sysctl runs.
sysctl dev.<nexus>.<inst>.local_cpus
sysctl dev.<nexus>.<inst>.intr_cpus
sysctl dev.t6nex.0.local_cpus
sysctl dev.t6nex.0.intr_cpus
Sponsored by: Chelsio Communications
These are represented as booleans on the kernel-side, but were being exposed
as int. This was causing some funky things to happen when read later with
sysctl(8), e.g. randomly reading super-high when the value was actually
'0'/false.
Reviewed by: manu
original initialization, so we don't miss few registers to
configure.
This fixes vtnet(4) operation with QEMU's virtio-net-device.
Tested in QEMU with FreeBSD/RISC-V.
Reviewed by: bryanv
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15821
This was the wrong solution to the problem; regulator_shutdown invokes
regnode_stop. regulator_stop is not a refcounting method, but it invokes
regnode_enable, which is.
mmel@ has a proposed patch/solution to instead provide regnode_fixed_stop
behavior that properly takes shared GPIO pins into account.
Only the first device will print
coretemp0: <CPU On-Die Thermal Sensors> numa-domain 0 on cpu0
instead of all hyper threads
Submitted by: kbowling
Reviewed by: imp, sbruno
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15727
regnode::enable_cnt is generally used to refcount regulator nodes. For
GPIOs, the refcount was done on the gpio_entry since more than one regulator
can share a GPIO.
GPIO regulators were not taking part in the node refcount, since they had
their own mechanism. This caused some fallout after manu started disabling
everybody's unused regulators in r331989.
Refcount it.
Glanced over by: manu
