In all of these source files, the userspace pointer size corresponds
with the kernelspace pointer size, meaning that casting directly works.
As I'm planning on making 32-bit execution on 64-bit systems work as
well, use TO_PTR() here as well, so that the changes between source
files remain minimal.
Use sbintime_t timeouts with precision control to get very accurate
timing. It costs little to always ask for about 1% accuracy, and the
not so new event timer implementation usual delivers that, and when
it can't it gets much closer than our previous coarse timeouts and
buggy simple countdown.
The 2 fastest atkbd repeat rates have periods 34 and 38 msec, and ukbd
pretended to support rates in between these. This requires
sub-microsecond precision and accuracy even to handle the 4 msec
difference very well, but ukbd asked the timeout subsystem for timeouts
of 25 msec and the buggy simple countdown of this gave a a wide range
of precisions and accuracies depending on HZ and other timer
configuration (sometimes better than 25 msec but usually more like 50
msec). We now ask for and usually get precision and accuracy of about
1% for each repeat and much better on average.
The 1% accuracy is overkill. Rounding of 30 cps to 34 msec instead of
33 already gives an error of +2% instead of -1%, and ut AT keyboards on
PS/2 interfaces have similar errors.
A timeout is now scheduled for every keypress and release. This allows
some simplifications that are not done. It allows removing the timeout
scheduling for exiting polled mode where it was unsafe in ddb mode. This
is done. Exiting polled mode had some problems with extra repeats. Now
exiting polled mode lets an extra timeout fire and the state is fudged
so that the timeout handler does very little.
The sc->time_ms variable is unsigned to avoid overflow. Differences of
it need to be signed. Signed comparisons were emulated by testing an
emulated sign bits. This only works easily for '<' comparisonss, but
we now need a '<=' comparison. Change the difference variable to
signed and use a signed comparison. Using unsigned types here didn't
prevent overflow bugs but just reduced them. Overflow occurs with
n repeats at the silly repeat period of [U]INT_MAX / n. The old countdown
had an off by 1 error, and the simplifications would simply count down
1 to 0 and not need to accumulate possibly-large repeat repeats.
And stringent input IC version negotiate message checks.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7614
RESET is not used by the hn(4) at all, and RESET_CMPLT does not even
have a rid to match with the pending requests. So, let's put it
onto an independent switch branch and log a warning about it.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7602
Summary:
Kernel maps only one page of FDT. When FDT is more than one page in size, data
TLB miss occurs on memmove() when FDT is moved to kernel storage
(sys/powerpc/booke/booke_machdep.c, booke_init())
This introduces a pmap_early_io_unmap() to complement pmap_early_io_map(), which
can be used for any early I/O mapping, but currently is only used when mapping
the fdt.
Submitted by: Ivan Krivonos <int0dster_gmail.com>
Differential Revision: https://reviews.freebsd.org/D7605
While I'm here, sort the RNDIS status in ascending order.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7594
The thermal sensor lives in the touch screen controller. Touch screen part
isn't done for now.
Temperature is read every ~2 seconds and exposed via sysctl.
kbdcontrol -r fast is documented to give a non-emulated atkbd's fastest
rate of 250.34, but is misimplemented to request this as 0.0. ukbd
supports many nonstandard rates, although it is currently too inaccurate
by a factor of several hundred for non-huge nonstandard rates to be
useful. It mapped 0.0 to 200.0. A repeat delay of 0 means a rate of
infinity which is quite fast, but physical constraints limit this to
a few MHz and the inaccuracies made it almost usable.
Convert 0.0 to the documented 250.34.
Also convert negative args and small args to the 250.34 minimal ones,
like atkbd does. This is for KDSETREPEAT -- the 2 versions of the
deprecated KDSETRAD have bounds checking. Keep not doing any bounds
checking or conversions for upper limits since nonstandard large
delays are useful for testing.
The inaccuracies are dependent on HZ and the timeout implementation.
With the old timeout implementation and HZ = 1000, 200.0 probably
worked better to emulate 250.34 than 250.34 itself. HZ = 100 gives
roundoff errors that accidentally reduce the inaaccuracies, and
event timers reduce the inaccuracies even more, so 200.0 was giving
more like itself (perhaps 215.15 on average but sometimes close to
10 msec repeat which is noticebly too fast). This commit makes 0.0
noticeably too slow, like 250.34 always was.
An optimization is in place to skip reading the .depend.* files with
'make install'. This was too strong and broke 'make all install' and
'make foo.o foo install'. Now only skip reading the dependency files
if all make targets ran are install targets.
The problem comes about because headers are only added in as a guessed
dependency if .depend.* files do not yet exist. If they do exist, even
if being skipped from being read, then the header dependencies are not
applied. This applies to all #included files, and not just headers.
Reported by: kib
MFC after: 1 day
Sponsored by: EMC / Isilon Storage Division
handling. This resulted in the window target being left uninitialized
when an underflow occured.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D7617
finding the vm_page_t in pmap_extract_and_hold. Previously it would return
the vm_page_t of the first page in a block. This would cause issues when,
for example, fsck reads from a device into the middle of a superpage. In
this case the read call would write to the start of the block, and not to
the buffer passed in.
Obtained from: ABT Systems Ltd
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Allow netbooting on efi without having to setup any NFS server by rebuilding the
loader with LOADER_TFTP_SUPPORT like for the i386 pxeloader
Sponsored by: Gandi.net
This code should be able to support later AMD chipsets as well, but that
hasn't been tested.
SB800 supports accessing several different SMBus buses using the same
set of constrol registeirs plus special PMIO registers that control which
bus is selected. This could be exposed to consumers as several smb devices
each talking to its bus. This feature is not implemented yet.
MFC after: 2 weeks
Summary:
There is no need to call tlb1_init() twice. Now it is called first time from
booke_init() and second time from powerpc_init() (where it is under BOOKE
switch). Although this does not cause immediate problems in the mainline kernel,
this can lead to undesirable side effects like two TLB entries with the same VA
in the TLB1. Presence of two TLB entries with the same VA can hang CPU.
Test Plan:
Add initial mapping for UART to the tlb1_init(), build and boot the kernel,
ensure that mapping presents only once (most convinient way - through Lauterbah
or similar hardware debugger)
Submitted by: Ivan Krivonos <int0dster_gmail.com>
Differential Revision: https://reviews.freebsd.org/D7607
Summary: Current booke/pmap code ignores mas7 and mas8 on e6500 CPU.
Submitted by: Ivan Krivonos <int0dster_gmail.com>
Differential Revision: https://reviews.freebsd.org/D7606
So that Hyper-V can leverage them instead of rolling its own definition.
Discussed with: hps
Reviewed by: hps
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7592
Move msix_disable_migration under #ifdef SMP since it doesn't make sense
for !SMP kernels.
PR: 212014
Reported by: Glyn Grinstead <glyn@grinstead.org>
MFC after: 3 days
its own job because this breaks the simplified QEMU XHCI TRB parser,
which expects the complete USB control transfer as a series of back to
back TRBs. The old behaviour is kept under #ifdef in case this change
breaks enumeration of any USB devices.
PR: 212021
MFC after: 1 week
Copy over amd64's cloudabi64_sysvec.c into i386 and tailor it to work.
Again, we use a system call convention similar to FreeBSD, except that
there is no support for indirect system calls (%eax == 0).
Where i386 differs from amd64 is that we have to store thread/process
entry arguments on the stack instead of using registers. We also have to
put an extra pointer on the stack for TLS (for GSBASE). Place that
pointer in the empty slot that is normally used to hold return
addresses. That seems to keep the code simple.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D7590
The previous fix was tested mainly on 3 AT keyboards with USB adaptors where
it works. 1 USB keyboard doesn't translate Alt-PrintScreen, so the software
has to do it.
Reorganize a little to share some code and to not translate the unusual usb
scan code0x8a unless an Alt modified is set. Remove redundant check of Alt
modifiers. Translation now more clearly filters out Alt-PrintScreen before
the check.
The table of errors fixed in the previous commit had many bugs. Correct
table:
K_RAW Ctl-PrintScreen: E0-2A-E0-37 -> E0-37
K_RAW Alt-PrintScreen (with 4 comb. of Ctl/Shift): 79 -> 54
K_RAW Pause/Break (with 4 comb. of Alt/Shift): E0-46 -> E1-1D-45
K_CODE PrintScreen (with 4 comb. of Ctl/Shift): 54 -> 5c
K_CODE Alt-PrintScreen (with 4 comb. of Ctl/Shift): 7e -> 54
K_CODE Pause/Break (with 8 comb. of Ctl/Alt/Shift): 6c -> 68
That is 25 of 32 shift combinations for 2 keys fixed. All 16 combinations
were broken for K_CODE and thus also for K_XLATE.
r304436 attempted to optimize the handling of incoming UDP packet by only
making an expensive call to in_broadcast() if the mbuf was marked as an
broadcast packet. Unfortunately, this cannot work in the case of point-to-
point L2 protocols like PPP, which have no notion of "broadcast".
Discussions on how to properly fix r304436 are ongoing, but in the meantime
disable the optimization to ensure that no existing network setups are broken.
Reported by: bms
pagetable is supported more will be added soon to support removing
superpages.
Obtained from: ABT Systems Ltd
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
is_completion_pending governs whether or not a callout will be scheduled
when new work is queued on the IOAT device. If true, a callout is
already scheduled, so we do not need a new one. If false, we schedule
one and set it true. Because resetting the hardware completed all
outstanding work but failed to clear is_completion_pending, no new
callout could be scheduled after a reset with pending work.
This resulted in a driver hang for polled-only work.
physical address. This is required when either mapping is writeable.
While here remove an unneeded call to pmap_pde, we already have the pde
from earlier in the function.
Obtained from: ABT Systems Ltd
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
configuring of EP0 and non-EP0 into xhci_cmd_evaluate_ctx() and
xhci_cmd_configure_ep() respectivly. This resolves some errors when
using XHCI under QEMU and gets is more in line with the XHCI
specification.
PR: 212021
MFC after: 1 week
And don't recreate chimney sending buffer for each primary channel
open, it is now created in device_attach DEVMETHOD and destroyed
in device_detach DEVMETHOD.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7574
