the firmware status register on the card to see if the firmware is still
running. There is no way to recover from this, but at least it can give
a hint as whether the car has crashed (which happens all too often).
MFC after: 3 days
errors for the attachment process for the floppy controller. This is
a band-aide because it doesn't try any of the fallback methods when
_FDE isn't long enough, but should be sufficient for people
experiencing the dreaded mutex not initialized panic.
not sure yet about 5.x... MFC if needed.
Also fixes small problems with examining some registers and
some specific gdb transfer problems.
As the patch says:
This is not a pretty patch and only meant as a temporary
fix until a better solution is committed.
PR: i386/71715
Submitted by: Stephan Uphoff <ups@tree.com>
MFC after: 1 week
it travels through the IP stack. This wasn't much of a problem because IP
source routing is disabled by default but when enabled together with SMP and
preemption it would have very likely cross-corrupted the IP options in transit.
The IP source route options of a packet are now stored in a mtag instead of the
global variable.
and which takes a M_WAITOK/M_NOWAIT flag argument.
Add compatibility isa_dmainit() macro which whines loudly if
isa_dma_init() fails.
Problem uncovered by: tegge
problems:
1) Add locking for SMP, code provided by Alan Cox
2) While testing Alan's patches, I observed serious problems with
the jumbo buffer allocation code (machine crashed twice), so I gutted
it and rewrote the receive handler to use multiple chained descriptors.
Each RX descriptor gets a single 2K cluster, and the chip will fill in
as many as it needs to hold the complete packet.
User reports that this corrects the data corruption issues previously
observed and discussed on -current.
Note that this driver still needs to be hit with the busdma stick.
I intend to inflict said beating in the near future.
MFC after: 1 week
careful with the skip condition this time. Addresses are only not taken into
account if:
- The interface is POINTTOPOINT
- There is no route installed for the address
- The user specified noalias (:0)
and - We are looking at an IPv4 address.
This should be enough paranoia to not cause any false positives.
PR: misc/69954
Discussed with: yongari
MFC after: 4 days
o Allow for up to 3 resource I/O ranges to be given for the floppy
controller, rather than just two that are allowed for now.
o Make sure that we can work with either a base address of 0x3f0 or 0x3f2.
o Create new inline functions to access the YE DATA's unique BDCR register.
o Update pccard attachment to add the fd device.
o Do some minor style(9) polishing.
# I'm guessing that the fdc pccard attachment broke some time ago, since
# there are a number of issues with it still.
save to call if_attachdomain from if_attach() (as done for if_loop.c). We
will now end up with a properly initialized if_afdata array and the nd6
callout will no longer try to deref a NULL pointer.
Still this is a temp workaround and the locking for if_afdata should be
revisited at a later point.
Requested by: rwatson
Discussed with and tested by: yongari (a while ago)
PR: kern/70393
MFC after: 5 days
filters). After the ipfw to pfil move ip_input() expects M_FASTFWD_OURS
tagged packets to have ip_len and ip_off in host byte order instead of
network byte order.
PR: kern/71652
Submitted by: mlaier (patch)
and sent to the DIVERT socket while the original packet continues with the
next rule. Unlike a normally diverted packet no IP reassembly attemts are
made on tee'd packets and they are passed upwards totally unmodified.
Note: This will not be MFC'd to 4.x because of major infrastucture changes.
PR: kern/64240 (and many others collapsed into that one)
doesn't do this is beyond me, but that will be investigated later. This
results in programming the chip with the correct frequency, which in turn
allows devices to negotiate up to the full 20MB/s.
and the previously malloc'ed snapshot lock.
Malloc struct snapdata instead of just the lock.
Replace snapshot fields in cdev with pointer to snapdata (saves 16 bytes).
While here, give the private readblock() function a vnode argument
in preparation for moving UFS to access GEOM directly.
