Imported BE, much like the activated BE, will not have an origin that we can
fetch/examine for destruction. be_destroy should not return BE_ERR_NOORIGIN
for failure to get the origin property for BE_DESTROY_AUTOORIGIN, because
we don't really know going into it that there's even an origin to be
destroyed.
BE_DESTROY_NEEDORIGIN has been renamed to BE_DESTROY_WANTORIGIN because only
a subset of it *needs* the origin, so 'need' is too strong of verbiage.
This was caught by jenkins and the bectl tests, but kevans failed to run the
bectl tests prior to commit.
Reported by: lwhsu
New BEs can be created from either an existing snapshot or an existing BE.
If an existing BE is chosen (either implicitly via 'bectl create' or
explicitly via 'bectl create -e foo bar', for instance), then bectl will
create a snapshot of the current BE or "foo" with be_snapshot, with a name
formatted like: strftime("%F-%T") and a serial added to it.
This commit adds the needed bits for libbe or consumers to determine if a
snapshot names matches one of these auto-created snapshots (with some light
validation of the date/time/serial), and also a be_destroy flag to specify
that the origin should be automatically destroyed if possible.
A future commit to bectl will specify BE_DESTROY_AUTOORIGIN by default so we
clean up the origin in the most common case, non-user-managed snapshots.
Summary:
This forces applications linked with lib CSU to have a .got, fixing binaries
linked with LLD9 after secure-plt was enabled on FreeBSD.
Submitted by: Alfredo Dal'Ava Junior (alfredo.junior_eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D21476
Compiling with clang gives a loss-of-alignment error due the cast to
uint8_t *. Since the TLS is always tcb aligned and TP_OFFSET is defined
as sizeof(struct tcb) we can guarantee there is no misalignment. Silence
the error by moving the offset into the inline assembly.
Reviewed by: br
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21926
Clang from trunk recently added a warning for when implicit int-to-float
conversions cause a loss of precision. The code in question is designed
to be able to handle that, so add explicit casts to silence this.
Submitted by: James Clarke <jrtc27@jrtc27.com>
Reviewed by: dim
Obtained from: CheriBSD
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D21913
This warning (comparing a pointer against a zero character literal
rather than NULL) has existed since GCC 7.1.0, and was recently added to
Clang trunk.
Almost all of these are harmless, except for fwcontrol's str2node, which
needs to both guard against dereferencing a NULL pointer (though in
practice it appears none of the callers will ever pass one in), as well
as ensure it doesn't parse the empty string as node 0 due to strtol's
awkward interface.
Submitted by: James Clarke <jtrc27@jrtc27.com>
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D21914
This provides a framework to define a template describing
a set of "variables of interest" and the intended way for
the framework to maintain them (for example the maximum, sum,
t-digest, or a combination thereof). Afterwards the user
code feeds in the raw data, and the framework maintains
these variables inside a user-provided, opaque stats blobs.
The framework also provides a way to selectively extract the
stats from the blobs. The stats(3) framework can be used in
both userspace and the kernel.
See the stats(3) manual page for details.
This will be used by the upcoming TCP statistics gathering code,
https://reviews.freebsd.org/D20655.
The stats(3) framework is disabled by default for now, except
in the NOTES kernel (for QA); it is expected to be enabled
in amd64 GENERIC after a cool down period.
Reviewed by: sef (earlier version)
Obtained from: Netflix
Relnotes: yes
Sponsored by: Klara Inc, Netflix
Differential Revision: https://reviews.freebsd.org/D20477
Diff partially stolen from CheriBSD; these bits need -Wl,-z,notext in order
to build in an LLVM world. They are needed for all flavors/sizes of MIPS.
This will eventually get fixed in LLVM, but it's unclear when.
Reported by: arichardson, emaste
Differential Revision: https://reviews.freebsd.org/D21696
The debug level generally just controls verbosity of libusb for debugging
libusb devices/usage. We allow the environment to set the debug level
independent of the application, but the application will always override
this if it explicitly sets the debug level.
Changing the environment is easy, but patching the software to change the
debug level isn't necessarily easy or possible. Further, there's this
write-only debug_fixed variable that would seem to imply that the debug
level should be fixed, but it isn't currently used. Change the logic to use
strtol() so we can detect real 0 vs. conversion failure, then honor
debug_fixed in libusb_set_debug.
Reviewed by: hselasky
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D21877
While FreeBSD's implementation of these expect an int inside of libc, that's an
implementation detail that we can hide from the user as it's the natural
promotion of the current mode_t type and before it is used in the kernel, it's
converted back to the narrower type that's the current definition of mode_t. As
such, documenting int is at best confusing and at worst misleading. Instead add
a note that these args are variadic and as such calling conventions may differ
from non-variadic arguments.
promoted to ints).
- `mode_t` is `uint16_t` (`sys/sys/_types.h`)
- `openat` takes variadic args
- variadic args cannot be 16-bit, and indeed the code uses int
- the manpage currently kinda implies the argument is 16-bit by saying `mode_t`
Prompted by Rust things: https://github.com/tailhook/openat/issues/21
Submitted by: Greg V at unrelenting
Differential Revision: https://reviews.freebsd.org/D21816
Summary: When powerpc64 switches to LLVM, use this patch to enable
OpenMP as well. OpenMP on PPC is only for 64-bits, so don't make a
32-bit libomp. A change to openmp files is necesssary (under review on
https://reviews.llvm.org/D67190), because it determines ELF format
version based on endianness, which is incorrect.
Reviewed by: alfredo.junior_eldorado.org.br, #manpages
Differential Revision: https://reviews.freebsd.org/D21532
Add an atomic shm rename operation, similar in spirit to a file
rename. Atomically unlink an shm from a source path and link it to a
destination path. If an existing shm is linked at the destination
path, unlink it as part of the same atomic operation. The caller needs
the same permissions as shm_unlink to the shm being renamed, and the
same permissions for the shm at the destination which is being
unlinked, if it exists. If those fail, EACCES is returned, as with the
other shm_* syscalls.
truss support is included; audit support will come later.
This commit includes only the implementation; the sysent-generated
bits will come in a follow-on commit.
Submitted by: Matthew Bryan <matthew.bryan@isilon.com>
Reviewed by: jilles (earlier revision)
Reviewed by: brueffer (manpages, earlier revision)
Relnotes: yes
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D21423
Described in [1], signal handlers running in a vfork child have
opportunities to corrupt the parent's state. Address this by adding a new
rfork(2) flag, RFSPAWN, that has vfork(2) semantics but also resets signal
handlers in the child during creation.
x86 uses rfork_thread(3) instead of a direct rfork(2) because rfork with
RFMEM/RFSPAWN cannot work when the return address is stored on the stack --
further information about this problem is described under RFMEM in the
rfork(2) man page.
Addressing this has been identified as a prerequisite to using posix_spawn
in subprocess on FreeBSD [2].
[1] https://ewontfix.com/7/
[2] https://bugs.python.org/issue35823
Reviewed by: jilles, kib
Differential Revision: https://reviews.freebsd.org/D19058
When RFSPAWN is passed, rfork exhibits vfork(2) semantics but also resets
signal handlers in the child during creation to avoid a point of corruption
of parent state from the child.
This flag will be used by posix_spawn(3) to handle potential signal issues.
Reviewed by: jilles, kib
Differential Revision: https://reviews.freebsd.org/D19058
C/C++) in exp(3), expf(3), expm1(3) and expm1f(3) during intermediate
computations that compute the IEEE-754 bit pattern for |2**k| for
integer |k|.
The implementations of exp(3), expf(3), expm1(3) and expm1f(3) need to
compute IEEE-754 bit patterns for 2**k in certain places. (k is an
integer and 2**k is exactly representable in IEEE-754.)
Currently they do things like 0x3FF0'0000+(k<<20), which is to say they
take the bit pattern representing 1 and then add directly to the
exponent field to get the desired power of two. This is fine when k is
non-negative.
But when k<0 (and certain classes of input trigger this), this
left-shifts a negative number -- an operation with undefined behavior in
C and C++.
The desired semantics can be achieved by instead adding the
possibly-negative k to the IEEE-754 exponent bias to get the desired
exponent field, _then_ shifting that into its proper overall position.
(Note that in case of s_expm1.c and s_expm1f.c, there are SET_HIGH_WORD
and SET_FLOAT_WORD uses further down in each of these files that perform
shift operations involving k, but by these points k's range has been
restricted to 2 < k <= 56, and the shift operations under those
circumstances can't do anything that would be UB.)
Submitted by: Jeff Walden, https://github.com/jswalden
Obtained from: https://github.com/freebsd/freebsd/pull/411
Obtained from: https://github.com/freebsd/freebsd/pull/412
MFC after: 3 days
memfd_create is effectively a SHM_ANON shm_open(2) mapping with optional
CLOEXEC and file sealing support. This is used by some mesa parts, some
linux libs, and qemu can also take advantage of it and uses the sealing to
prevent resizing the region.
This reimplements shm_open in terms of shm_open2(2) at the same time.
shm_open(2) will be moved to COMPAT12 shortly.
Reviewed by: markj, kib
Differential Revision: https://reviews.freebsd.org/D21393
bde reports (in a reply to r351700 commit mail):
This uses scasb, which was last optimal on the 8086, or perhaps the
original i386. On freefall, it is several times slower than the
naive translation of the naive C code.
Reported by: bde
Reviewed by: kib, markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21785
If robust mutex' owner terminated, causing kernel-assisted state
recovery, and then pthread_mutex_destroy() is executed as the next
action, assert is triggered about mutex still being on the list.
Ignore the mutex linkage in pthread_mutex_destroy() for shared robust
mutexes with dead owner, same as for enqueue_mutex().
Reported by: avg
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The two options are
* nocover/cover: Prevent/allow mounting over an existing root mountpoint.
E.g., "mount -t ufs -o nocover /dev/sd1a /usr/local" will fail if /usr/local
is already a mountpoint.
* emptydir/noemptydir: Prevent/allow mounting on a non-empty directory.
E.g., "mount -t ufs -o emptydir /dev/sd1a /usr" will fail.
Neither of these options is intended to be a default, for historical and
compatibility reasons.
Reviewed by: allanjude, kib
Differential Revision: https://reviews.freebsd.org/D21458
Add support for kernel threads in kvm_getprocs() and the underlying
kvm_proclist() in libkvm when fetching from a kernel core file. This
has been missing/needed for several releases, when kernel threads became
normal threads. The loop over the processes now contains a sub-loop for
threads, which iterates beyond the first thread only when threads are
requested. Also set some fields such as tid that were previously
uninitialized.
Reviewed by: vangyzen jhb(earlier revision)
MFC after: 4 days
Sponsored by: Forcepoint LLC
Differential Revision: https://reviews.freebsd.org/D21461
There is no trivial way to mark single libarchive test skip currently so just
add it to BROKEN_TESTS for now.
PR: 240683
Sponsored by: The FreeBSD Foundation
BERI stands for Bluespec Extensible RISC Implementation, based on MIPS.
BERI has not implemented standard MIPS perfomance monitoring counters,
instead it provides statistical counters.
BERI statcounters have a several limitations:
- They can't be written
- They don't support start/stop operation
- None of hardware interrupt is provided on a counter overflow.
So make it separate to hwpmc_mips module and support process/system
counting mode only.
Sponsored by: DARPA, AFRL
Note that old pkg will failed to build after this. A recent ports tree (one
providing pkg 1.12+) is required to build. Older already built pkg, should
continue working as expected
PR: 238797
Exp run by: antoine
Reviewed by: cem
Approved by: cem
Differential Revision: https://reviews.freebsd.org/D20752
has become very trigger-happy with libc++ 9.0.0.
It does not help that gcc's implementation of this warning is even more
trigger-happy, in the sense that it already warns on the declaration
itself, not when you are using it. This is very annoying with our use
of -Wsystem-headers. That should really be disabled for gcc.
calls to max allowed UDP datagram size.
Since max allowed size both for keys and values where increased, the
old sizes of around 1K cause ypmatch(3) failures, while plain maps
fetches work.
The buffers were reduced in r34146 from default UDP rpcclient values
to 1024/2304 due to the key and value size being 1K.
Reviewed by: slavash
Sponsored by: Mellanox Technologies
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D21586
std::auto_ptr in a whole bunch of individual Makefiles, make the warning
globally non-fatal instead. This is similar to what was done to many
more non-fatal warnings from newer gcc versions.
