The various protocol implementations are not very consistent about
freeing mbufs in error paths. In general, all protocols must free both
"m" and "control" upon an error, except if PRUS_NOTREADY is specified
(this is only implemented by TCP and unix(4) and requires further work
not handled in this diff), in which case "control" still must be freed.
This diff plugs various leaks in the pru_send implementations.
Reviewed by: tuexen
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D30151
Commit 81728a538 ("Split rtinit() into multiple functions.") removed
the initialization of sa6, but not one of its uses. This meant that we
were passing an uninitialized sockaddr as the address to
lltable_prefix_free(). Remove the variable outright to fix the problem.
The caller is expected to hold a reference on pr.
Fixes: 81728a538 ("Split rtinit() into multiple functions.")
Reported by: KMSAN
Reviewed by: donner
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D30166
A successful copyinstr() call guarantees that the returned string is
nul-terminated. Furthermore, the removed check would harmlessly compare
an uninitialized byte with '\0' if the new name is shorter than
IFNAMESIZ - 1.
Reported by: KMSAN
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
There is no need to call it evert 10ms when we need 1s granularity.
Update to update the time every second.
Reviewed by: imp, manu, tsoome
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D30227
When the TCP is in the front states, don't take the slop variable
into account. This improves consistency with the base stack.
Reviewed by: rrs@
Differential Revision: https://reviews.freebsd.org/D30230
MFC after: 1 week
Sponsored by: Netflix, Inc.
Merge commit '2858419a0ee2b8f5827de72c00618bcd69ebc5fc'
This update fixes the initialization of "scale" to 20 if started with
-l and the initial statement leads to an error (e.g. contains a syntax
error). Scale was initialized to 0 in that case.
Another change is the support of job control in interactive mode with
line editing enabled. The control characters have been interpreted as
editing commands only, prior to this version.
MFC after: 3 days
Make rc.d/routing read defaultrouter_fibN and ipv6_defaultrouter_fibN, and
set it as the default gateway for FIB N, where N is from 1 to (net.fibs - 1)
This allows adding gateways for multiple FIBs in the same format as the main
gateway. (FIB 0)
Reviewed by: olivier, rgrimes, bcr (man page)
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D22706
In commit 6bb140e3ca, vm_destroy() was replaced with free() to
preserve errno. However, it's possible that free() may change the errno
as well. Keep the free() call, but explicitly save and restore errno.
Noted by: jhb
Fixes: 6bb140e3ca
While refactoring an earlier series of changes during review, the
'saved_data' variable stopped being used at the bottom of if_ioctl().
Suggested by: brooks
Reviewed by: brooks, imp, kib
Fixes: d17e0940f7 Rework compat shims in ifioctl().
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D30197
UFS does not allow files to end with a hole; it requires that the
last block of a file be allocated. As fsck_ffs(8) initially scans
each allocated inode, it tracks the last allocated block in the
inode. It then checks that the inode's size falls in the last
allocated block. If the last allocated block falls before the size,
a `file size beyond end of allocated file' warning is issued and
the file is shortened to reference the last allocated block (to avoid
having it reference a hole at its end). If the last allocated block
falls after the size, a `partially truncated file' warning is issued
and all blocks following the block referenced by the size are freed.
Because of an incorrect unsigned comparison, this test was failing
to handle files with no allocated blocks but non-zero size (which
should have had their size reset to zero). Once that was fixed the
test started incorrectly complaining about short symbolic links
that place the link path in the inode rather than in a disk block.
Because these symbolic links have a non-zero size, but no allocated
blocks, fsck_ffs wanted to zero out their size. This patch has to
detect and avoid changing the size of such symbolic links.
Reported by: Chuck Silvers
Tested by: Chuck Silvers
MFC after: 1 week
Sponsored by: Netflix
Fix some erronous lines in the example section.
PR: 248943
Submitted by: Jose Luis Duran
MFC after: 2 weeks
Reviewers: ae, manpages (gbe)
Differential Revision: https://reviews.freebsd.org/D30191
Python 3.8 warns about line 112:
'SyntaxWarning: "is" with a literal. Did you mean "=="?'
Use '==' as Python suggests.
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
The hotplug script will be executed only once for each backend,
regardless of the frontend triggering reconnections. Fix blkback to
deal with the hotplug script being executed only once, so that
reconnections don't stall waiting for a hotplug script execution
that will never happen.
As a result of the fix move the initialization of dev_mode, dev_type
and dev_name to the watch callback, as they should be set only once
the first time the backend connects.
This fix is specially relevant for guests wanting to use UEFI OVMF
firmware, because OVMF will use Xen PV block devices and disconnect
afterwards, thus allowing them to be used by the guest OS. Without
this change the guest OS will stall waiting for the block backed to
attach.
Fixes: de0bad0001 ('blkback: add support for hotplug scripts')
MFC after: 1 week
Sponsored by: Citrix Systems R&D
Rack now after the previous commit is very careful to translate any
value in the hostcache for srtt/rttvar into its proper format. However
there is a snafu here in that if tp->srtt is 0 is the only time that
the HC will actually restore the srtt. We need to then only convert
the srtt restored when it is actually restored. We do this by making
sure it was zero before the call to cc_conn_init and it is non-zero
afterwards.
Reviewed by: Michael Tuexen
Sponsored by: Netflix Inc
Differential Revision: https://reviews.freebsd.org/D30213
Looping back router multicast traffic signifficantly
stresses network stack. Add possibility to disable or enable
loopbacked based on sysctl value.
Reported by: Daniel Deville
Reviewed by: mw
Differential Revision: https://reviews.freebsd.org/D29947
There is a race condition between V_ip_mrouter de-init
and ip_mforward handling. It might happen that mrouted
is cleaned up after V_ip_mrouter check and before
processing packet in ip_mforward.
Use epoch call aproach, similar to IPSec which also handles
such case.
Reported by: Damien Deville
Obtained from: Stormshield
Reviewed by: mw
Differential Revision: https://reviews.freebsd.org/D29946
I accidentally dropped this in the final version of D27625, so it didn't
actually work as intended. I found this while testing the MFC to stable/13.
MFC after: immediately
Fixes: 7daca4e204 ("truss: improved support for decoding compat32 arguments")
Hostnames starting with "tablearg" are considered as a functional
argument instead of a literal.
Reported by: ae
Reviewers: ae
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D30208
There are two module declarations in the nfscl.ko module for "nfscl"
and "nfs". Both of these declarations had MODULE_DEPEND() calls.
This patch deletes the MODULE_DEPEND() calls for "nfs" to avoid
confusion with respect to what modules this module is dependent upon.
The patch also adds comments explaining why there are two module
declarations within the module.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D30102
vn_fullpath_any_smr() will return a positive error number if the
caller-supplied buffer isn't big enough. In this case the error must be
propagated up, otherwise we may copy out uninitialized bytes.
Reported by: syzkaller+KMSAN
Reviewed by: mjg, kib
MFC aftr: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D30198
rtld preserves its current error message around calls to user init/fini
lists, to not override original error with potential secondary errors
caused by user code recursing into rtld. After 4d9128da54,
the preservation of the string itself is not enough, the 'seen'
indicator must be preserved as well. Otherwise, since new code does not
clear string (it cannot), call to _rtld_error() from errmsg_restore()
revived whatever message was consumed last.
Change errmsg_save() to return structure recording both 'seen' indicator
and the message, if any.
PR: 255698
Reported by: Eugene M. Kim <astralblue@gmail.com>
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
It reopens the passed file descriptor, checking the file backing vnode'
current access rights against open mode. In particular, this flag allows
to convert file descriptor opened with O_PATH, into operable file
descriptor, assuming permissions allow that.
Reviewed by: markj
Tested by: Andrew Walker <awalker@ixsystems.com>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D30148
Recover from excessive losses without reverting to a
retransmission timeout (RTO). Disabled by default, enable
with sysctl net.inet.tcp.do_lrd=1
Reviewed By: #transport, rrs, tuexen, #manpages
Sponsored by: Netapp, Inc.
Differential Revision: https://reviews.freebsd.org/D28931
Implement persistent history storage:
the strategy is simple at start: loads the existing .sh_history file
at exit dump it.
The implementation respects the HISTFILE variable and its POSIX
definition: ~/.sh_history is used if HISTFILE is not set.
to avoid sh to create the history file, set HISTSIZE to 0 or HISTFILE to
en empty value
Co-authored-by: pstef
Reviewed by: jilles
Differential Revision: https://reviews.freebsd.org/D29493
The hostcache up to now as been updated in the discard callback
but without checking if we are all done (the race where there are
more than one calls and the counter has not yet reached zero). This
means that when the race occurs, we end up calling the hc_upate
more than once. Also alternate stacks can keep there srtt/rttvar
in different formats (example rack keeps its values in microseconds).
Since we call the hc_update *before* the stack fini() then the
values will be in the wrong format.
Rack on the other hand, needs to convert items pulled from the
hostcache into its internal format else it may end up with
very much incorrect values from the hostcache. In the process
lets commonize the update mechanism for srtt/rttvar since we
now have more than one place that needs to call it.
Reviewed by: Michael Tuexen
Sponsored by: Netflix Inc
Differential Revision: https://reviews.freebsd.org/D30172
Distinguish between truly invalid requests and those that fail because
we've already joined the group. Both cases fail, but differentiating
them allows userspace to make more informed decisions about what the
error means.
For example. radvd tries to join the all-routers group on every SIGHUP.
This fails, because it's already joined it, but this failure should be
ignored (rather than treated as a sign that the interface's multicast is
broken).
This puts us in line with OpenBSD, NetBSD and Linux.
Reviewed by: donner
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D30111
