When ARC size is very small, aggsum_lower_bound(&arc_size) may return
negative values, that due to unsigned comparison caused delays, waiting
for arc_adjust() to "fix" it by calling aggsum_value(&arc_size). Use
of signed comparison there fixes the problem.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
While formally it is not necessary, but the sooner it start, the sooner it
finish, and supposedly less disturbing for workload it will be.
MFC after: 2 weeks
Differentiate between PCI Express Endpoint devices and Root Complex
Integrated Endpoints in the nda driver. The Link Status and Capability
registers are not valid for Integrated Endpoints and should not be
displayed. The bhyve emulated NVMe device will advertise as being an
Integrated Endpoint.
Reviewed by: imp
Approved byL imp (mentor)
Differential Revision: https://reviews.freebsd.org/D20282
These calls are not the same in general: the former will dequeue the
page if it is enqueued, while the latter will just leave it alone. But,
all existing uses of the former apply to unmanaged pages, which are
never enqueued in the first place. No functional change intended.
Reviewed by: kib
MFC after: 1 week
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20470
This set of changes make it possible to run FreeBSD for PowerPC64/pseries,
under QEMU/KVM, without requiring the host to make hugepages available to the
guest.
While there was already this possibility, by means of setting hw_direct_map to
0, on PowerPC64 there were a couple of issues/wrong assumptions that prevented
this from working, before this changelist.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D20522
The NVMe CAM driver reports the PCIe Link Capability and Status for
devices. For emulated bhyve NVMe devices, this looks like:
nda0: nvme version 1.3 x63 (max x63) lanes PCIe Gen15 (max Gen15) link
The driver outputs this because the emulated device doesn't include the
PCIe Capability structure. The NVMe specification requires these
registers, so the fix is to add this set of capability registers to the
emulated device.
Note that PCI Express devices that are integrated into the Root Complex
(i.e. Bus 0x0) do not have to support the Link Capability or Status
registers. Windows will fail to start (i.e. Code 10) devices that appear
to be part of the Root Complex but report being a PCI Express Endpoint.
So also add a check to pci_emul_add_pciecap() to check if the device is
integrated and change the device type.
Reviewed by: imp, ken, araujo, jhb, rgrimes
Approved by: imp (mentor), ken (mentor), jhb (maintainer)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D19904
This ensures that bhyve properly recognizes when decoding is disabled
for BARs on passthru devices. To properly handle writes to the
register, export a pci_emul_cmd_changed function from pci_emul.c that
the pass through device model invokes for config writes that change
PCIR_COMMAND.
Reviewed by: rgrimes
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20531
Rather than uncoditionally setting the MEMEN and PORTEN bits in
PCIR_COMMAND for PCI devices, set the respective bit when the first
BAR of a given type is added to the device. This more closely matches
what firmware does on bare metal.
BUSMASTEREN is still set unconditionally. Eventually this bit should
move into the device models as not all device models need this set.
Reviewed by: rgrimes
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20530
This gets reasonably close to the existing format in sys/kern but will
probably require some changes to upstream clang-format before it can be
used as the default formatting tool.
I tried formatting a few files in sys/kern and the result is pretty close to
the existing code. However, this configuration file is not ready to be used
without manually checking the output.
Reviewed By: emaste
Differential Revision: https://reviews.freebsd.org/D20533
- Add constants for OpenBSD wxneeded, bootdata and randomize to the
FreeBSD elf_common.h file. This is the file that gets used by the
elftoolchain library.
- Update readelf and elfdump utilities to decode these program headers
if they are encountered.
Note: FreeBSD has it's own version of elfdump(1), which will be updated
in a subsequent commit. I am adding it here anyway because this diff is
going to be submitted upstream.
Discussed with: emaste
Reviewed by: imp
MFC afer: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20548
M contrib/elftoolchain/elfdump/elfdump.c
M contrib/elftoolchain/readelf/readelf.c
M sys/sys/elf_common.h
Before r305323 (MFV r302991: 6950 ARC should cache compressed data)
arc_read() code did this for access to a ghost buffer:
arc_adapt() (from arc_get_data_buf())
arc_access(hdr, hash_lock)
I.e., we first checked access to the MFU ghost/MRU ghost buffer and
adapt MFU/MRU sizes (in arc_adapt()) and next move buffer from the ghost
state to regular.
After r305323 the sequence is different:
arc_access(hdr, hash_lock);
arc_hdr_alloc_pabd(hdr);
I.e., we first move the buffer from the ghost state in arc_access() and
then we check access to buffer in ghost state (in arc_hdr_alloc_pabd()
-> arc_get_data_abd() -> arc_get_data_impl() -> arc_adapt()). This is
incorrect: arc_adapt() never see access to the ghost buffer because
arc_access() already migrated the buffer from the ghost state to
regular.
So, the fix is to restore a call to arc_adapt() before arc_access() and
to suppress the call to arc_adapt() after arc_access().
Submitted by: Slawa Olhovchenkov <slw@zxy.spb.ru>
MFC after: 2 weeks
Sponsored by: Integros [integros.com]
Differential Revision: https://reviews.freebsd.org/D19094
Simplify the code a bit and rework how we report the results
of the probing.
Reviewed by: tsoome@
Differential Revision: https://reviews.freebsd.org/D20537
ZFS ABD allocates tons of 4KB chunks via UMA, requiring huge hash tables.
With initial hash table size of only 32 elements it takes ~20 expansions
or ~400 seconds to adapt to handling 220GB ZFS ARC. During that time not
only the hash table is highly inefficient, but also each of those expan-
sions takes significant time with the lock held, blocking operation.
On my test system with 256GB of RAM and ZFS pool of 28 HDDs this change
reduces time needed to first time read 240GB from ~300-400s, during which
system is quite busy and unresponsive, to only ~150s with light CPU load
and just 5 sub-second CPU spikes to expand the hash table.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Note llvm-ar is linked to llvm-ranlib since r311565. r348677 fixed
"make delete-old" issue with llvm-ar but missed it somehow.
Discussed with: emaste, jhb
BootServices AllocatePool/FreePool calls. They are simpler to use and
result in the same thing happening.
Reviewed by: tsoome@
Differential Revision: https://reviews.freebsd.org/D20540
This fixes a panic in Espressobin when gpioregulator fails to allocate the
GPIO pin (the GPIO controller is not there).
Sponsored by: Rubicon Communications, LLC (Netgate)
Provide the acpi handle path as the location string for the nvdimm
children of the nvdimm_root device.
Reviewed by: kib
Approved by: jhb (mentor)
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D20528
vm_reserv_break in r348484, and there was found to improve performance
minutely and reduce code size. This change applies a similar change to
vm_reserv_reclaim_config, expecting similar benefits. This change also
allows quick rejection of page ranges that are unsuitable on account
of alignment or boundary issues, where those issues are processed a
page at a time in the current implementation. For contrived test
cases, this can make finding a reservation satisfying a major
alignment requirement around 30 times faster.
Tested by: pho
Approved by: markj (mentor)
Differential Revision: https://reviews.freebsd.org/D20274
The D_PARTNONE is documented to make it possible to open raw MBR
partition, but the current disk_open() does not really implement this
statement.
The current code is checking partition against -1 (D_PARTNONE) but does
attempt to open partition table in case we do have FreeBSD MBR partition type.
Instead, we should check -2 (D_PARTWILD).
In case we do have MBR + BSD label, this code is only working because
by default, the first BSD partiton is created starting with relative sector
0, and we can still access the BSD table from that MBR slice.
Reviewed by: imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20501
Its result is only used to determine whether to perform further
INVARIANTS-only checks. Remove a stale comment while here.
Submitted by: Sebastian Huber <sebastian.huber@embedded-brains.de>
MFC after: 1 week
Previously it did this only on platforms without a direct map. This
also more closely matches Linux's semantics.
Since some DRM v5.0 code assumes the old behaviour, use a
LINUXKPI_VERSION guard to preserve that until the out-of-tree module
is updated.
Reviewed by: hselasky, kib (earlier versions), johalun
MFC after: 1 week
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20502
When disabling the last enabled userspace probe, fasttrap clears the
function pointers which hook in to the breakpoint handler. If a traced
thread hit a fasttrap breakpoint before it was removed, we must ensure
that it is able to call the hook; otherwise fasttrap will not consume
the trap and SIGTRAP will be delievered to the thread. Synchronize
with such threads by ensuring that they load the hook pointer with
interrupts disabled, and by completing an SMP rendezvous after removing
breakpoints and before clearing the pointers.
Reported by: Alexander Alexeev <Alexander.Alexeev@dell.com>
Tested by: Alexander Alexeev (earlier version)
Reviewed by: cem, kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20526
Add the debug.try_reclaim_vnode sysctl. When a pathname is written to it, it
will be reclaimed, as long as it isn't already or doomed. The purpose is to
gain test coverage for vnode reclamation, which is otherwise hard to
achieve.
Add the debug.ftry_reclaim_vnode sysctl. It does the same thing, except
that its argument is a file descriptor instead of a pathname.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20519
The corresponding changes for the RACK stack where missed and are added
by this commit.
Reviewed by: Richard Scheffenegger, rrs@
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D20372
The comment property was listed in the man page twice, once under the list
of read-only properties, and again (correctly), under the list of user
editable properties.
PR: 238355
Reported by: Michael Zuo <muh.muhten@gmail.com>
Sponsored by: Klara Systems
Coverity warned about gdb_write_mem sign extending the result of
parse_byte shifted left by 24 bits when generating a 32-bit memory
write value for MMIO. Simplify the code by using parse_integer
instead of unrolled parse_byte calls.
CID: 1401600
Reviewed by: cem
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D20508
Create two tests checking if we can read urgs registers and if the
rax register returns a correct number.
Reviewed by: markj
Discussed with: lwhsu
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20364
