and exclusion patterns [1]
- Some improvements on the exiting code, like replacing memcpy with
strlcpy/strcpy
Approved by: delphij (mentor)
Pointed out by: bf [1], des [1]
or if forced mode is specified [1]
- While here, add some alternative names for the options and make then
case-insensitive
- Fix -q and -l behaviour [2]
- Some small changes to make the code easier to review
Submitted by: swell.k@gmail.com [1],
dougb [2]
Approved by: delphij (mentor)
- Explicitly pre-zero memory for fts_open parameters.
- Don't test against directory patterns when we are testing direct
leaf of current directory.
While I'm there plug a few of memory leaks.
- Fix two minor nits in manpage [2]
- style.Makefile(5)
Submitted by: pluknet <pluknet at gmail.com> [1],
Alex Kozlov <spam@rm-rf.kiev.ua> [2]
Reviewed by: delphij
Deliverables: Small and clean code (1,4 KSLOC vs GNU's 8,5 KSLOC),
lower memory usage than GNU grep, GNU compatibility,
BSD license.
TODO: Performance is somewhat behind GNU grep but it is only
significant for bigger searches. The reason is complex, the
most important factor is that GNU grep uses lots of
optimizations to improve the speed of the regex library.
First, we need a modern regex library (practically by adopting
TRE), add support for GNU-style non-standard regexes and then
reevalute the performance issues and look for bottlenecks. In
the meantime, for those, who need better performance, it is
possible to build GNU grep by setting WITH_GNU_GREP.
Approved by: delphij (mentor)
Obtained from: OpenBSD (http://www.openbsd.org/cgi-bin/cvsweb/src/usr.bin/grep/),
freegrep (http://github.com/howardjp/freegrep)
Sponsored by: Google SoC 2008
Portbuild tests run by: kris, pav, erwin
Acknowledgements to: fjoe (as SoC 2008 mentor),
everyone who helped in reviewing and testing
-fno-rtti. The clang libaries that really use exceptions and virtual
functions can enable LLVM_REQUIRES_EH and LLVM_REQUIRES_RTTI
respectively. This saves space on the resulting binaries and follows
what's being done upstream.
Submitted by: Dimitry Andric <dimitry at andric.com>
This commit merges the latest LLVM sources from the vendor space. It
also updates the build glue to match the new sources. Clang's version
number is changed to match LLVM's, which means /usr/include/clang/2.0
has been renamed to /usr/include/clang/2.8.
Obtained from: projects/clangbsd
default invokation):
- Right now if segments are not writable are not included. Remove this.
- Right now if a segment is mapped with NOCORE the check is not honoured.
Change this by checking the newly added flag, from libutil,
KVME_FLAG_NOCOREDUMP.
Besides that, add a new flag (-f) that forces a 'full' dump of all the
segments excluding just the malformed ones. This might be used very
carefully as, among the reported segments, there could be memory
mapped areas that could be vital to program execution.
Sponsored by: Sandvine Incorporated
Discussed with: kib
Reviewed by: emaste
Tested by: Sandvine Incorporated
MFC after: 2 weeks
the same fix present in NetBSD.
Note: the getopt man page contains more antique information like this.
An overhaul of the man page and/or sync with NetBSD would be the right
thing to do. But since this is out of the scope of the PR, I'll leave
it as it is for now.
PR: docs/133118
Submitted by: Oleg A. Mamontov (oleg at mamontov dot net)
Discussed with: jilles@
MFC after: 2 weeks
is still one issue on FreeBSD/arm (signed vs unsigned char) which prevents
actually bumping this to WARNS=6 - I'm still considering the correct
solution to this issue.
Tested by: make universe
to print the stats were using an uninitialised variable. [1]
Fix trasnfer statistics in the "receive file" case - the statistics struct
was being cleared both before and after the initial connect to the remote
server. As a result, the printed time and calculated bandwidth covers
the time to connect ad well as the time to transfer the file. This may
not be ideal, but now at least matches the "send file" case.
Found by: clang static analyser [1]
Reviewed by: imp
This switch makes it a lot easier to locate problem areas when a process
is threatening to consume all of your disk space.
PR: 144192
Submitted by: gk
MFC after: 3 weeks
of times the system was forced to sleep when requesting a new allocation.
Expand the debugger hook, db_show_uma, to display these results as well.
This has proven to be very useful in out of memory situations when
it is not known why systems have become sluggish or fail in odd ways.
Reviewed by: rwatson alc
Approved by: scottl (mentor) peter
Obtained from: Yahoo Inc.
report the compression ratio as 0% instead of displaying
nonsense triggered by numeric overflow. This is common
when dealing with uncompressed files when the I/O blocking
causes there to be small transient differences in the
accounting.
Thanks to: Boris Samorodov
This avoids errors or __DECONST() from places with higher WARNS levels.
Adjust a local cache variable in ipcs to const as well
to compile in the new world order.
Suggested by: jhb
Reviewed by: jhb, kib, brueffer (man)
There's a parsing error for fields where addresses are not separated by
space. This is often produced by MS Outlook, eg.:
Cc: <foo@bar.com>,"Mr Foo" <foo@baz.com>
The following line now splits into the right tokens:
Cc: f@b.com,z@y.de, <a@a.de>,<c@c.de>, "foo" <foo>,"bar" <bar>
PR: bin/131861
Submitted by: Pete French <petefrench at ticketswitch.com>
Tested by: Pete French
Reviewed by: mikeh
MFC after: 2 weeks
utilities and related support files for manual pages, which were previously
controlled by MAN. For POLA, the default depends on MAN, i.e., WITHOUT_MAN
implies WITHOUT_MAN_UTILS and WITH_MAN implies WITH_MAN_UTILS. This patch
is slightly improved by me from:
PR: misc/145212
ar(1)'s dependencies on compressor libraries -lz, -lbz2 and -llzma and
fixes building HEAD on some versions of FreeBSD[78]. Option -j and -z
is now accepted but ignored.
Compressed ar(1) archives are not useful without a ld(1) that can read
them. Also, the current ar(1) compression scheme prevents random
access of archive members and needs to be redesigned anyway.
Submitted by: kientzle (original patch)
Reviewed by: delphij
Discussed on: -current mailing list
bottom of the manpages and order them consistently.
GNU groff doesn't care about the ordering, and doesn't even mention
CAVEATS and SECURITY CONSIDERATIONS as common sections and where to put
them.
Found by: mdocml lint run
Reviewed by: ru
- Upper case the first character of an description
- Section headings do not need to be quoted. From OpenBSD's make.1, revision 1.81
- Plural of suffix is suffixes. From OpenBSD's make.1, revision 1.61
- s/seperating/separating/
PR: 135165
Submitted by: Alan R. S. Bueno <alan.bsd@gmail.com>
MFC after: 1 week
Adjust dependencies for programs using libarchive
Add xz and linkage against liblzma to rescue system
Approved by: kientzle, delphij (mentor)
MFC after: 2 weeks
This joint work of Dag-Erling Smørgrav and myself updates the
FFS quota system to support both traditional 32-bit and new 64-bit
quotas (for those of you who want to put 2+Tb quotas on your users).
By default quotas are not compiled into the kernel. To include them
in your kernel configuration you need to specify:
options QUOTA # Enable FFS quotas
If you are already running with the current 32-bit quotas, they
should continue to work just as they have in the past. If you
wish to convert to using 64-bit quotas, use `quotacheck -c 64';
if you wish to revert from 64-bit quotas back to 32-bit quotas,
use `quotacheck -c 32'.
There is a new library of functions to simplify the use of the
quota system, do `man quotafile' for details. If your application
is currently using the quotactl(2), it is highly recommended that
you convert your application to use the quotafile interface.
Note that existing binaries will continue to work.
Special thanks to John Kozubik of rsync.net for getting me
interested in pursuing 64-bit quota support and for funding
part of my development time on this project.
sigvec(2) references have been updated to sigaction(2), sigsetmask(2) and
sigblock(2) to sigprocmask(2), sigpause(2) to sigsuspend(2).
Some legacy man pages still refer to them, that is OK.
lot better than what's in the tree now. Edwin tested it at a prior
employer, but can't test it today. I've found that it works a lot
better with the various uboot versions that I've used in my embedded
work. Here's the pkg-descr from the port that describes the changes:
It all started when we got some new routers, which told me the
following when trying to upload configuration or download images
from it: The TFTP server doesn't support the blocksize option.
My curiousity was triggered, it took me some reading of RFCs and
other documentation to find out what was possible and what could
be done. Was plain TFTP very simple in its handshake, TFTP with
options was kind of messy because of its backwards capability: The
first packet returned could either be an acknowledgement of options,
or the first data packet.
Going through the source code of src/libexec/tftpd and going through
the code of src/usr.bin/tftp showed that there was a lot of duplicate
code, and the addition of options would only increase the amount
of duplicate code. After all, both the client and the server can
act as a sender and receiver.
At the end, it ended up with a nearly complete rewrite of the tftp
client and server. It has been tested against the following TFTP
clients and servers:
- Itself (yay!)
- The standard FreeBSD tftp client and server
- The Fedora Core 6 tftp client and server
- Cisco router tftp client
- Extreme Networks tftp client
It supports the following RFCs:
RFC1350 - THE TFTP PROTOCOL (REVISION 2)
RFC2347 - TFTP Option Extension
RFC2348 - TFTP Blocksize Option
RFC2349 - TFTP Timeout Interval and Transfer Size Options
RFC3617 - Uniform Resource Identifier (URI) Scheme and Applicability
Statement for the Trivial File Transfer Protocol (TFTP)
It supports the following unofficial TFTP Options as described at
http://www.compuphase.com/tftp.htm:
blksize2 - Block size restricted to powers of 2, excluding protocol headers
rollover - Block counter roll-over (roll back to zero or to one)
From the tftp program point of view the following things are changed:
- New commands: "blocksize", "blocksize2", "rollover" and "options"
- Development features: "debug" and "packetdrop"
If you try this tftp/tftpd implementation, please let me know if
it works (or doesn't work) and against which implementaion so I can
get a list of confirmed working systems.
Author: Edwin Groothuis <edwin@FreeBSD.org>
Spaces and various other characters in pathnames are not passed through
literally by xargs in its default mode. Instead, use find . -exec ... {} +
Although the -- argument is not strictly required here, add it anyway to
avoid surprises when modifying the code to find -f -somedir ...
MFC after: 1 week
This option checks for empty pathnames and components starting with '-'.
Our -p option also checks for the latter, which remains the case.
MFC after: 1 week
Because script(1) now reliably terminates when the TTY is closed, it may
be the case that the call to wait3() occurs just before the child
process exits. This causes error codes to be ignored.
Just change script(1) to use waitpid() instead of wait3(). This makes it
more portable and prevents the need for a loop, since waitpid() only
returns a specified process.
PR: bin/146189
Tested by: amdmi3@, older version
MFC after: 2 weeks
handler, as the latter is not guaranteed to be signal safe, and we
do not really care about flushing the stream during SIGINT.
Suggested by: Maxim Konovalov <maxim.konovalov gmail com>
MFC after: 13 days
These are specified by POSIX but are not special builtins, and therefore
need to be available via execve() and utilities like time, nohup, xargs.
(Note that hash was moved from the XSI option to the base in the 2008
standard.)
Like most of the POSIX "regular builtin commands", these need to be executed
in a shell environment for full functionality, although they may still be of
some use outside one.
Unlike the POSIX special and regular builtin commands, POSIX does not
require these to be found before a PATH search, although that could be an
oversight.
Like some of the utilities already provided by usr.bin/alias, these may lead
to confusing results when invoked from csh(1).
It seems that identifier "_t" is sometimes used as a variable name,
even in our tree. Not that I endorse that, but still it's better
to require at least one character before _t suffix to consider
an identifier to be a type name.
Reported by: Alex Vasylenko <lxv@omut.org>
MFC after: 1 week
Although groff_mdoc(7) gives another impression, this is the ordering
most widely used and also required by mdocml/mandoc.
Reviewed by: ru
Approved by: philip, ed (mentors)
* It is not extracted (because it is excluded)
* If it's not present in the archive, then an error is
reported (because the file was requested and not found)
* If it is present in the archive, no error is reported.
Previously, this would always report an error because the
exclusion prevented the entry from matching the inclusion.
Also, tar is now more reluctant to report unmatched inclusions.
Previously, "tar x file1 'file*'" against an archive that contained a
single entry "file1" would match file1 and then report an error for
the second pattern because it wasn't matched. It now considers both
inclusions to be matched and reports no error.
Bump the alignment to 16bytes because lint1 memory allocator is used for
objects that require 16bytes alignment on amd64 (ie. val_t). This makes
lint1 work when compiled with compiler(s) that use SSE for memcpy on amd64.
(e.g. clang).
Approved by: ed (mentor)
addresses (most of them apart from ::1): put a whitespace
between local and remote address:port pairs.
PR: bin/145194
Submitted by: Fedor Dikarev
MFC after: 2 weeks
- Remove the 3rd clause of the UC Berkeley copyrighted files.
- For the files added copyrighted by me, move the "All rights
reserved" to the next line.
- Repeating events which span multiple years (because of -A, -B or
just the three days before the end of the year).
- Support for lunar events (full moon, new moon) and solar events
(equinox and solstice, chinese new year). Because of this, the
options -U (UTC offset) and -l (longitude) are available to
compensate if reality doesn't match the calculated values.
MFC after: 1 month
Note that this is actually a no-op for most users, as this GNU
cpio was broken on -HEAD and 8-STABLE since last March until
the recent fix.
FreeBSD 8.0+ uses BSD cpio by default and the code is being
actively maintained.
Blessed by: kientzle
With hat: secteam
MFC after: 3 days
Using 'sysctl vfs' is not only ugly, but is also not reliable - not all
file system types create entries in vfs sysctl tree.
Reviewed by: imp
MFC after: 1 week
starting from netgraph import in 1999.
netstat(8) used pointer to node as node address, oops. That didn't
work, we need the node ID in brackets to successfully address a node.
We can't look into ng_node, due to inability to include netgraph/netgraph.h
in userland code. So let the node make a hint for a userland, storing
the node ID in its private data.
MFC after: 2 weeks
arguments makes sense anymore. For example, what would a combination
of -3 (show three months) and -y (show the whole year) do?
We will abort on these cases.
- Move the debug option -d to -H (from highlight), while -d is now
used for setting the day of "today" so that -y and friends can
be tested.
Close the file descriptor to the TTY. There is no reason why the parent
process should keep track of the descriptor. This ensures that the
application inside properly drains the TTY during exit(2).
Reported by: alfred
MFC after: 2 weeks
in the input data but fallback to "binary comparison" instead.
POSIX says: "The input files shall be text files", nothing more,
so the text file with illegal sequence is valid input.
BTW, GNU sort does not fails on EILSEQ too.
