After an MC reboot, a VF driver may reset before the PF driver has
finished bringing everything back up. This includes the VFs EVB port.
MC_CMD_VADAPTOR_ALLOC is the first MCDI call after an MC reboot to
require the EVB port, so if it fails with MC_CMD_ERR_NO_EVB_PORT,
retry the command a few times after waiting a while.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4333
Make link control privilege visible to OS driver to guard updates to
flow control and PHY advertised capabilities.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4330
It allows manftest to program them.
Submitted by: Paul Fox <pfox at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4329
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4328
Common code should infer other privileges from Admin privilege to
support firmware that pre-dates introduction of specific privilege
flags.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4327
unwound through. For this we need the frame pointer (x29) to point to the
location on the stack where we stored the previous frame pointer, and link
register. To simplify this the stack pointer is only adjusted by addition
and subtraction, and not through the use of post increment on loads and
stores.
The updated frame layout is:
+------------+
| lr -- x30 |
+------------+
| fp -- x29 | <-- x29 points at this
+------------+
| Trap frame |
| ... |
| | <-- sp points at this
+------------+
The only difference is the first two items, and setting of x29.
Sponsored by: ABT Systems Ltd
atomic functions where they are almost identical, or have acquire/release
semantics.
While here clean these function up. The cbnz instruction doesn't change
the condition flags so drop cc, however they should have memory added to the
clobber list.
Reviewed by: kib
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D4318
In case when router has a lot of multicast groups, the reply can take
several packets due to MTU limitation.
Also we have a limit IGMP_MAX_RESPONSE_BURST == 4, that limits the number
of packets we send in one shot. Then we recalculate the timer value and
schedule the remaining packets for sending.
The problem is that when we call igmp_v3_dispatch_general_query() to send
remaining packets, we queue new reply in the same mbuf queue. And when
number of packets is bigger than IGMP_MAX_RESPONSE_BURST, we get endless
reply of IGMPv3 reports.
To fix this, add the check for remaining packets in the queue.
MFC after: 1 week
Sponsored by: Yandex LLC
a reply to the MLDv2 General Query. In case when router has a lot of
multicast groups, the reply can take several packets due to MTU limitation.
Also we have a limit MLD_MAX_RESPONSE_BURST == 4, that limits the number
of packets we send in one shot. Then we recalculate the timer value and
schedule the remaining packets for sending.
The problem is that when we call mld_v2_dispatch_general_query() to send
remaining packets, we queue new reply in the same mbuf queue. And when
number of packets is bigger than MLD_MAX_RESPONSE_BURST, we get endless
reply of MLDv2 reports.
To fix this, add the check for remaining packets in the queue.
PR: 204831
MFC after: 1 week
Sponsored by: Yandex LLC
prints the trap frame, along with the exception syndrome and fault address
registers. Even though esr is 64-bits here it is only 32-bits in hardware
so only print the valid 32-bits.
While here also print esr and far when appropriate after printing the trap
frame.
Sponsored by: ABT Systems Ltd
invalid (busy) page supposedly inserted by the vm_fault(), in the
OBSC_COLLAPSE_NOWAIT case. As a continuation to r221714, fix a case
when invalid page is found by the object scan in OBSC_COLLAPSE_WAIT
case as well. But, since this is waitable scan, we should wait for
the termination of the busy state and restart from the beginning of
the backing object' page queue. [*]
Do not free the shadow page swap space when the parent page is
invalid, otherwise this action potentially corrupts user data.
Combine all instances of the collapse scan sleep code fragments into
the new helper vm_object_backing_scan_wait().
Improve style compliance and comments. Change the return type of
vm_object_backing_scan() to bool.
Initial submission by: cem, https://reviews.freebsd.org/D4103 [*]
Reviewed by: alc, cem
Tested by: cem
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D4146
Submitted by: Artem V. Andreev <Artem.Andreev at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4308
It is really observed in the case of VLAN over sfxge interface.
Also this change makes total value equal to 35 which is default assumed
by the kernel for if_hw_tsomaxsegcount.
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4319
This is not properly respecting WITHOUT or ARCH dependencies in target/.
Doing so requires a massive effort to rework targets/ to do so. A
better approach will be to either include the SUBDIR Makefiles directly
and map to DIRDEPS or just dynamically lookup the SUBDIR. These lose
the benefit of having a userland/lib, userland/libexec, etc, though and
results in a massive package. The current implementation of targets/ is
very unmaintainable.
Currently rescue/rescue and sys/modules are still not connected.
Sponsored by: EMC / Isilon Storage Division
IPv4/IPv6 checksum offloading and VLAN tag insertion/stripping.
Since uether doesn't provide a way to announce driver specific offload
capabilities to upper stack, checksum offloading support needs more work
and will be done in the future.
Special thanks to Hayes Wang from RealTek who gave input.
tunable via sysctl or kernel tunables.
Illumos allows this parameters to be changed via the fasttrap.conf configuration
file, but FreeBSD code hardcoded the parameters. Expose them under
the kern.dtrace.fasttrap sysctl tree.
MFC after: 2 weeks
option that will be added to the nfsuserd daemon in a future
commit. It modifies the cache used by NFSv4 for name<-->id
translation (both username/uid and group/gid) to support this.
When "-manage-gids" is set, the server looks up each uid
for the RPC and uses the list of groups cached in the server
instead of the list of groups provided in the RPC request.
The cached group list is acquired for the cache by the nfsuserd
daemon via getgrouplist(3).
This avoids the 16 groups limit for the list in the RPC request.
Since the cache is now used for every RPC when "-manage-gids"
is enabled, the code also modifies the cache to use a separate
mutex for each hash list instead of a single global mutex.
Suggested by: jpaetzel
Tested by: jpaetzel
MFC after: 2 weeks
tested on the Broadwell-Xeon with a hacked up version of pmcstudy -T. I still need
to circle back and add in to pmcstudy all the new tests from the Broadwell Vtune
guide (for the hacked up version I just made it so I could run the -T option). The
Skylake CPU is not yet available (even though Intel is advertising it .. imagine that).
The Skylake PMC's will need to be tested once we can get a sample skylake CPU :-)
Sponsored by: Netflix Inc.
This change will fix kernel panic with uninitialized (zeroed)
RXON structure.
Tested with Intel 3945BG, IBSS mode.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D4304
- add new TEX class for WT cacheable memory
- export new TEX class to kernel as VM_MEMATTR_WT attribute
- add new aliases VM_MEMATTR_WRITE_COMBINING and
VM_MEMATTR_WRITE_BACK, it's used in DRM code
Note:
Only Cortex A8 supports WT caching in HW. On rest of Cortex CPUs,
WT requests is treated as uncacheable.
Approved by: kib (mentor)
The synth programming here requires the real centre frequency,
which for HT20 channels is the normal channel, but HT40 is
/not/ the primary channel. Everything else was using 'freq',
which is the correct centre frequency, but the hornet config
was using 'ichan' to do the lookup which was also the primary
channel.
So, modify the HAL call that does the mapping to take a frequency
in MHz and return the channel number.
Tested:
* Carambola 2, AR9331, tested both HT/20 and HT/40 operation.
by filter function instead of picking into routing table details in
each consumer.
Remove now-unused rt_expunge() (eliminating last external RTF_RNH_LOCKED
user).
This simplifies future nexthops/mulitipath changes and rtrequest1_fib()
locking refactoring.
Actual changes:
Add "rt_chain" field to permit rte grouping while doing batched delete
from routing table (thus growing rte 200->208 on amd64).
Add "rti_filter" / "rti_filterdata" / "rti_spare" fields to rt_addrinfo
to pass filter function to various routing subsystems in standard way.
Convert all rt_expunge() customers to new rt_addinfo-based api and eliminate
rt_expunge().
on every allocation and fully releases them on every free. These
are not trivial costs: it starts by zeroing a large structure then
initializes a mutex, a lock manager lock, an rw lock, four lists,
and six pointers. And looking at vfs.vnodes_created, these operations
are being done millions of times an hour on a busy machine.
As a performance optimization, this code update uses the uma_init
and uma_fini routines to do these initializations and cleanups only
as the vnodes enter and leave the vnode_zone. With this change the
initializations are only done kern.maxvnodes times at system startup
and then only rarely again. The frees are done only if the vnode_zone
shrinks which never happens in practice. For those curious about the
avoided work, look at the vnode_init() and vnode_fini() functions in
kern/vfs_subr.c to see the code that has been removed from the main
vnode allocation/free path.
Reviewed by: kib
Tested by: Peter Holm
the name of a filesystem when setting it as the first parameter to the
getnewvnode() function. Most filesystems call getnewvnode from just one
place so can use a literal string as the first parameter. However, NFS
calls getnewvnode from two places, so we create a global constant string
that can be used by the two instances. This change also collapses two
instances of getnewvnode() in the UFS filesystem to a single call.
Reviewed by: kib
Tested by: Peter Holm
Systematically use ANSI C functions definitions.
Correct type of the flags argument to the dev_pager_putpages() function.
Use vm_pager_free_nonreq().
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
On ARM, we must ensure proper interdevice write ordering.
The AHCI interrupt status register must be updated in HW before
registers in interrupt controller.
Unfortunately, only way how we can do it is readback.
Discussed with: mav
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D4240
This is a 2x2 2GHz 802.11n part. It works enough at the moment to
bring up, scan and associate. I haven't started using this as
a day to day AP.
The specifics:
* add honeybee initvals
* add in changes; a mix from the QCA HAL and ath9k;
* fix a bug in AR_SREV_AR9580_10_OR_LATER(), which is only used
for one capability check and we don't even implement it - so it's
a big no-op.
Shady things:
* ath9k has the "platform data" define the 25/40MHz clock.
This HAL .. doesn't. Honeybee gets hard-coded to 25MHz which
it likely shouldn't be. I'll have to go and identify/fix those.
Tested:
* Qualcomm Atheros AP143 reference design board.
Obtained from: Qualcomm Atheros; Linux ath9k
Using a typedef for common code return types (rather than "int")
allows the Prefast static analyser to understand when a function
has been successful (and thus when its postconditions must hold).
This greatly reduces then number of false positives reported by
prefast for error paths in common code functions.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
