for buffer allocation. If driver know we are out of Rx buffers let
controller stop. This should fix panic when interface is run even
if it had no configured Rx buffers.
and Rx DMA tag separately. Previously it used a common mbuf DMA tag
for both Tx and Rx path but Rx buffer(standard ring case) should
have a single DMA segment and maximum buffer size of the segment
should be less than or equal to MCLBYTES. This change also make it
possible to add TSO with minor changes.
bge_newbuf_std still has a bug for handling dma map load failure
under high network load. Just reusing mbuf is not enough as driver
already unloaded the dma map of the mbuf. Graceful recovery needs
more work.
Ideally we can just update dma address part of a Rx descriptor
because the controller never overwrite the Rx descriptor. This
requires some Rx initialization code changes and it would be done
later after fixing other incorrect bus_dma(9) usages.
- Remove CAM_PERIPH_POLLED flag. It is broken by design. Polling can't be
periph flag. May be SIM, may be CCB, but now it works fine just without it.
- Remove check unused for at least five years. If we will ever have non-BIO
devices in CAM, this check is smallest of what we will need.
- If several controllers complete requests same time, call swi_sched()
only once.
- Add support for sector size > 512 bytes and physical sector of several
logical sectors, introduced by ATA-7 specification.
- Remove some obsoleted code.
for the permission to create subdirectory (ACE4_ADD_SUBDIRECTORY)), it doesn't
really make sense for VOP_ACCESS(9). Also, many VOP_ACCESS(9) implementations
don't expect that. Make sure we don't confuse them.
ocassions, memory barriers semantic is not honoured by the hardware
itself. As a result, some random breakage can happen in uninvestigable
ways (for further explanation see at the content of the commit itself).
As long as just a specific familly is bugged of an entire architecture
is broken, a complete fix-up is impratical without harming to some
extents the other correct cases.
Considering that (and considering the frequency of the bug exposure)
just print out a warning message if the affected machine is identified.
Pointed out by: Samy Al Bahra <sbahra at repnop dot org>
Help on wordings by: jeff
MFC: 3 days
Normally msgbufp is locked using Giant. Switch it to use the
msgbuf_lock. Instead of changing the tsleep() calls to msleep(), just
convert it to condvar(9).
In my opinion the locking around msgbuf_peekbytes() still remains
questionable. It looks like locks are dropped while performing copies of
multiple blocks to userspace, which may cause the msgbuf to be reset in
the mean time. At least getting it underneath from Giant should make it
a little easier for us to figure out how to solve that.
Reminded by: rdivacky
- VBE 3.0 says palette format resets to 6-bit mode when video mode changes.
We simply set 8-bit mode when we switch modes if the adapter supports it.
- VBE 3.0 also says if the mode is not VGA compatible, we must use VBE
function to save/restore palette. Otherwise, VGA function may be used.
Thus, reinstate the save/load palette functions only for non-VGA compatible
modes regardless of its palette format.
- Let vesa(4) set VESA modes even if vga(4) claims to support it.
- Reset default palette if VESA pixel mode is set initially.
- Fix more style nits.
- Tear down the interrupt handler before killing the worker thread.
- Do geom withering as GEOM event to avoid acquiring the GEOM topology
lock under Giant.
PR: kern/104079
Reviewed by: joerg
Approved by: trasz (mentor)
This improvements aims for avoiding further cache-misses in scheduler
specific functions which need to keep track of average thread running
time and further locking in places setting for this flag.
Reported by: jeff (originally), kris (currently)
Reviewed by: jhb
Tested by: Giuseppe Cocomazzi <sbudella at email dot it>
prepared bytes and next portion of transfer, inner loop of kern_sendfile()
aborts, not preparing next mbuf for socket buffer, and not modifying
any outer loop invariants. The thread loops in the outer loop forever.
Instead of breaking from inner loop, prepare only bytes that fit into
the socket buffer space.
In collaboration with: pho
Reviewed by: bz
PR: kern/138999
MFC after: 2 weeks
- Rework timeout handling, to make it more graceful for devices sharing
controller port (with PMP). Wait for other commands completion/timeout
before initiating recovery.
- Handle timeouts and fatal errors with port hard-reset. The rest of
recovery will be done by XPT on receiving async event. More gracefull
per-device soft-reset recovery can be implemented later.
- Handle timeouts and fatal errors with port hard-reset. The rest of
recovery will be done by XPT on receiving async event. More gracefull
per-device soft-reset recovery can be implemented later.
- Add workaround for ATI SB600/SB700 PMP probe related bug, to speedup boot.
Right now sysctl just prints the major/minor numbers of a device.
Instead of rolling our own routine for this, we'd better just call
devname(3) to perform a translation to a device name for us.
disk is first probed. dagetcapacity is called whenever the disk is opened from
geom via d_open(), a zero sector size will cause geom to panic later on.
- New region: Asia/Novokuznetsk
- Kemerovo oblast' (Kemerovo region) in Russia will change current
time zone on 29 March 2010
- Add historical data for Hongkong 1941 - 1980
- Syria will go to winter time in the last weekend of October 2009.
MFC after: 2 days
- New region: Asia/Novokuznetsk
- Kemerovo oblast' (Kemerovo region) in Russia will change current
time zone on 29 March 2010
- Add historical data for Hongkong 1941 - 1980
- Syria will go to winter time in the last weekend of October 2009.
Obtained from: ftp://elsie.nci.nih.gov/pub/
Most of the pieces came from Marius- correct settings for channels
and resource management. The one piece missing was that you cannot
for SBus cards replace 32 bit operations with A64 operations- not
supported.
Submitted by: marius
MFC after: 3 days
