Commit Graph

448 Commits

Author SHA1 Message Date
imp
a18b0830c4 Remove trailing white space in advance of other changes. 2018-11-14 23:15:50 +00:00
imp
9225311061 Only assert locked for many async events.
Many async events that we see are called for this specific path. When
calling an async callback for a targetted device, XTP will lock that
specific device's path lock (same as what cam_periph_lock does). For
those AC_ events, assert we have the lock rather than trying to
recusrively take it (which causes panics since it's not recursive).

Add annotations about this and about the fact that AC_SCSI_AEN events
are generated now only in the ata stack (which cannot have a scsi_da
attachment). Leave it in place in case I've overlooked something as
the code is harmless.

This is fallout from my attempts to "fix" locking for softc->flags in
r330796 that's not been triggered often enough to get my attention
until now.

Sponsored by: Netflix
MFC After: 3 days
Differential Revision: https://reviews.freebsd.org/D17837
2018-11-05 18:47:29 +00:00
imp
8af15e0bcc Add comments explaining what hold/unhold do
They act as a simple one-deep semaphore to keep open/close/probe from
running at the same time to avoid races that creates.
2018-11-01 21:51:41 +00:00
imp
2e9fda2a00 Add statistics for TRIM comands
Add a counter for the LBAs, Ranges and hardware commands so that we
can provide additional color to the statistics we provide to vendors.

Sponsored by: Netflix, Inc
2018-10-26 16:23:51 +00:00
ken
b90df93520 Fix a da(4) driver memory leak for SCSI SMR devices.
In the probe case for SCSI SMR Host Aware or Most Managed drives, be sure
to free allocated memory.

sys/cam/scsi/scsi_da.c:
	In dadone_probezone(), free the data pointer before returning.

MFC after:	3 days
Sponsored by:	Spectra Logic
Approved by:	re (kib)
2018-10-01 19:00:46 +00:00
cem
f760da50b5 Walk back r337554 while discussion continues
The idea was to get the uncontroversial mechanical change out of the way,
then get the meatier functional changes reviewed subsequently.  I had not
realized that the immediately adjacent issue was addressed in a different
direction in r334506 (see Warner's guidance in D15592).

Discussion continues, trying to determine if there is a secondary issue
still[1] and how best to fix it.  With 12-related activities coming up,
while that is ongoing, just take this back for now.

[1]: Shutdown-time eventhandler events fire normally during panic's reboot
path.  Driver callbacks that attempt to issue and wait on interrupt-
completed IO may never complete, hanging the system.  This is particularly
obnoxious in the shutdown/panic path, as the debugger cannot be entered
anymore and the hang prevents reboot restoring availability.

(There's nothing CAM-specific about this problem -- any shutdown
event-triggered driver could do something like this during panic.  But most
NICs, etc.  don't try to send spin-down commands at shutdown. ;-))

Discussed with:	imp, markj
2018-08-10 19:19:07 +00:00
cem
5f3e2ff1af cam(4): Add an xpt-neutral flag indicating a valid panic CCB
No functional change.

Note that this change is careful to set the CCB header xflags after
foo_fill_bar() routines, which generally zero existing flags.  An earlier
version of this patch mistakenly set the flag before the fill routines.

Submitted by:	Scott Ferris <sferris AT isilon.com>, jhibbits@
Reviewed by:	bdrewery@, markj@, and non-committer FreeBSD contributor Anton Rang
Sponsored by:	Dell EMC Isilon
2018-08-09 21:53:32 +00:00
ken
896df23a52 Fix da(4) locking when probing SMR drives.
Probing host aware and host managed SMR drives got broken in revision
330796.

The added cam_periph_lock() calls were in areas in dadone() where
the peripheral lock was already held.

Since then, dadone() has been split into separate functions that are
dedicated to each probe state.

The result is that when probing a host aware drive, I ran into a recursive
lock acquisition in dadone_probeatalogdir(). I would have run into the
same problem in dadone_probeataiddir(), and in dadone_probeatasup() and
dadone_probeatazone() in the error paths had the probe continued.

The solution is to take out all of the extra cam_periph_lock() calls. I
also added cam_periph_assert(periph, MA_OWNED) near the top of each of
the dadone_* calls. These make it clear to anyone coming along in the
the future that the lock is held in the probe done functions.

Also add a locking assert in daprobedone(), to make it clear that it must
be called with the periph lock held.

Sponsored by:	Spectra Logic
Differential Revision:	https://reviews.freebsd.org/D15764
2018-06-14 17:08:44 +00:00
imp
b2910ffe25 Hold the reference count until the CCB is released
When a disk disappears and the periph is invalidated, any I/Os that
are pending with the controller can cause a crash when they
complete. Move to holding the softc reference count taken in dastart()
until the I/O is complete rather than only until xpt_action()
returns. (This approach was suggested by Ken Merry.)

Sponsored by: Netflix
Submitted by: Chuck Silvers
Differential Revision: https://reviews.freebsd.org/D15435
2018-05-15 21:25:35 +00:00
scottl
88f39fc72c Refactor dadone(). There was no useful code sharing in it; it was just
a 1500 line switch statement.  Callers now specify a discrete completion
handler, though they're still welcome to track state via ccb_state.

Sponsored by:	Netflix
2018-05-01 21:42:27 +00:00
scottl
2452912a61 cam_periph_runccb() changed several years ago to overwrite the ccb callback
pointer.  It's now unhelpful and misleading for callers to continue to set
it, so bring all callers into conformance.  There's no real functional change,
but it makes reading the code a lot less confusing.

Sponsored by:	Netflix
2018-05-01 20:09:29 +00:00
imp
3b84c0b927 Just assert that the lock is held here, rather than taking it out and
dropping it.

Sponsored by: Netflix
2018-04-13 16:45:35 +00:00
mav
e84a142670 Do not fail devices just for errors in descriptor format.
MFC after:	1 week
Sponsored by:	iXsystems, Inc.
2018-04-06 19:47:44 +00:00
imp
685a9276f2 Flag when we have a pending TUR. Don't schedule another one when we
have one pending. Otherwise, we can race and send two, which is
wasteful in close proximity. It can also cause the acaquire/release
count for TUR to be > 1, which is undexpected.

PR: 226510
Differential Review: https://reviews.freebsd.org/D14792
2018-03-23 16:23:15 +00:00
imp
20eb8298f5 Revert r331273: "Release the "TUR" reference when clearing the TUR work flag. We mostly"
It exposes other issues, so revert to the pervious state of known issues.
2018-03-21 12:55:59 +00:00
imp
c2ed5522d0 Release the "TUR" reference when clearing the TUR work flag. We mostly
do this right, except when there's no BP and we do a TUR by request.
In that case, we clear the flag, but don't release the reference,
leaking the reference on rare occasion.

PR: 226510
Sponsored by: Netflix
2018-03-20 22:07:45 +00:00
imp
bf523f13ef Only take out the periph lock when we're modifying the flags of the
softc for an async unit attention. CAM locks, sometimes, the periph
lock and other times does not. We were taking the lock always and
running into lock recursion issues on a non-recursive lock. Now we
take it selectively. It's not clear why xpt takes the lock selectively
before calling us, though, and that's still under investigation.

Reported by:	avg
PR:		226510 (same panic, differnt circumstances)
Sponsored by:	Netflix
2018-03-17 16:04:06 +00:00
imp
67b935fa34 Create a sysctl kern.cam.{,a,n}da.X.invalidate
kern.cam.{,a,n}da.X.invalidate=1 forces *daX to detach by calling
cam_periph_invalidate on the underlying periph. This is for testing
purposes only. Include only with options CAM_TEST_FAILURE and rename
the former [AN]DA_TEST_FAILURE, and fix nda to compile with it set.
We're using it at work to harden geom and the buffer cache to be
resilient in the face of drive failure. Today, it far too often
results in a panic. While much work was done on SIM initiated removal
for the USB thumnb drive removal work, little has been done for periph
initiated removal. This simulates what *daerror() does for some errors
nicely: we get the same panics with it that we do with failing drives.

Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D14581
2018-03-14 17:53:37 +00:00
imp
02d268dd26 Tighten up periph lock to avoid some races
Make sure the periph lock is held around rmw access to softc data,
espeically flags, including work flags in iosched.
Add asserts for the periph lock where it should be held.

PR: 226510
Sponsored by: Netflix
Differential Review: https://reviews.freebsd.org/D14456
2018-03-12 15:17:16 +00:00
imp
56151d954c Backout r329818, r329816 and r329815.
These aren't the commits I thought I was testing prior to
commit. Revert until I can sort out what happened and fix it.
2018-02-22 11:18:33 +00:00
imp
f92b0f08d7 Introduce capacity flags for periphs
Introduce flags word to describe the capacities of the peripheral.
First bit will describe if the periph driver allows multiple
outstanding TRIMS to be active in a device.

Modify the I/O scheduler so that the nda driver can queue trims
for a while after the first one arrives. We'll queue until we see
a I/O scheduler tick, then we'll schedule as many TRIMs as allowed
by other factors (currently this is slocts in the NVMe controller).
This mariginally helps the read latency issues we see with reads,
but sets the stage for the nda driver to do TRIM collapsing like the
da and ada drivers do today.

Sponsored by: Netflix
2018-02-22 05:43:55 +00:00
scottl
e437fbd6d8 Return a C errno for cam_periph_acquire().
There's no compelling reason to return a cam_status type for this
function and doing so only creates confusion with normal C
coding practices. It's technically an API change, but the periph API
isn't widely used. No efffective change to operation.

Reviewed by:	imp, mav, ken
Sponsored by:	Netflix
Differential Revision:	D14063
2018-02-06 06:42:25 +00:00
imp
5f0b41aafe Do the book-keeping on release before we release the reference. The
periph was going away on final release, and then returning and we
started dancing in free memory.

Sponsored by: Netflix
2018-01-29 18:07:14 +00:00
scottl
a6b028ff98 Finish the incomplete move of CAM_PERIPH_PRINT().
Reported by:	kevans
2018-01-27 07:18:02 +00:00
scottl
09a5d34c51 Move CAM_PERIPH_PRINT() to cam_periph.h 2018-01-26 23:56:07 +00:00
scottl
f405c9ee09 Fix a cut-and-paste error in a panic message 2018-01-26 18:42:28 +00:00
imp
03a94857f9 Track Ref / DeRef and Hold / Unhold that da is doing to track down
leaks. We assume each source can be taken / dropped only once and
don't recurse. These are only enabled via DA_TRACK_REFS or
INVARIANTS. There appreas to be a reference leak under extreme load,
and these should help us colaberatively work it out. It also documents
better the reference / holding protocol better.

Reviewed by: ken@, scottl@
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D14040
2018-01-25 21:38:30 +00:00
imp
f1c12a8a9e Minor whitespace cleanup to remove leading space before tab. No
functional changes.
2018-01-25 02:52:44 +00:00
imp
f300c8e371 This comment is bogus. This is a legit release.
Reviewed by: scottl@, ken@
Sponsored by: Netflix
2018-01-22 17:47:49 +00:00
avg
e3bb7b0fbf geom_disk / scsi_da: deny opening write-protected disks for writing
Ths change consists of two parts.

geom_disk: deny opening a disk for writing if it's marked as
write-protected.  A new disk(9) flag is added to mark write protected
disks.  A possible alternative could be to add another parameter to d_open,
so that the open mode could be passed to it and the disk drivers could
make the decision internally, but the flag required less churn.

scsi_da: add a new phase of disk probing to query the all pages mode
sense page.  We can determine if the disk is write protected using bit 7
of the device specific field in the mode parameter header returned by
MODE SENSE.

PR:		224037
Reviewed by:	mav
MFC after:	4 weeks
Differential Revision: https://reviews.freebsd.org/D13360
2018-01-15 11:20:00 +00:00
scottl
8ac0065bb8 Don't hold the periph lock when calling into cam_periph_runccb()
from the ada and da dump routines.  This avoids difficult locking
problems from needing to be handled.  While it might seem like this
would leave the periphs unprotected during dump, they were aleady
at risk of unexpected removal due to the dump functions not
keeping refcount state across the many calls that come in during
a dump.  This is an exercise for future work.

Obtained from:	Netflix
2018-01-09 00:10:59 +00:00
kan
c8da6fae2c Do pass removing some write-only variables from the kernel.
This reduces noise when kernel is compiled by newer GCC versions,
such as one used by external toolchain ports.

Reviewed by: kib, andrew(sys/arm and sys/arm64), emaste(partial), erj(partial)
Reviewed by: jhb (sys/dev/pci/* sys/kern/vfs_aio.c and sys/kern/kern_synch.c)
Differential Revision: https://reviews.freebsd.org/D10385
2017-12-25 04:48:39 +00:00
mav
abfdbcdb00 Reduce size of several on-stack string buffers.
Submitted by:	Dmitry Luhtionov <dmitryluhtionov@gmail.com>
MFC after:	2 weeks
2017-12-13 21:17:00 +00:00
imp
e3a601760b Define xpt_path_inq.
This provides a nice wrarpper around the XPT_PATH_INQ ccb creation and
calling.

Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D13387
2017-12-06 23:05:22 +00:00
imp
2e3bc4a610 Now that cam_periph_runccb() can be called from situations where the
kernel scheduler is stopped, replace the by hand calling of
xpt_polled_action() with it.

Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D13388
2017-12-06 23:05:15 +00:00
imp
e461367ac8 Remove unused 4th argument to match the standard error routines.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D13386
2017-12-06 00:29:50 +00:00
imp
aa29814434 Remove stray cam_periph_async call. It's called twice this way. While
currently harmless for AC_UNIT_ATTENTION event (cam_periph_async does
nothing with them), it's still in error because if it were to start in
the future, it would be done twice.

Sponsored by: Netflix
2017-12-05 23:02:31 +00:00
pfg
39ac7c1b27 sys/cam: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
2017-11-27 15:12:43 +00:00
asomers
f679d6b816 Quirk Seagate ST8000AS0003-2HH
Like its predecessor ST8000AS0002, this is a drive-managed SMR drive, but
doesn't declare that in its ATA identify data.

MFC after:	3 weeks
Sponsored by:	Spectra Logic Corp
2017-11-20 23:45:42 +00:00
asomers
307c4b1997 da(4): Short-circuit unnecessary BIO_FLUSH commands
sys/cam/scsi/scsi_da.c
	Complete BIO_FLUSH commands immediately if the da(4) device hasn't
	been written to since the last flush. If we haven't written to the
	device, there is no reason to send a flush.

Submitted by:	gibbs
Reviewed by:	imp
MFC after:	3 weeks
Sponsored by:	Spectra Logic Corp
Differential Revision:	https://reviews.freebsd.org/D13106
2017-11-20 22:27:33 +00:00
bapt
4960ea1acc Add some 4k quirks for Samsung pm863a SSDs
Submitted by:	Nikita Kozlov <nikita.kozlov at blade-group.com>
MFC after:	3 days
Sponsored by:	blade
Differential Revision:	https://reviews.freebsd.org/D13093
2017-11-16 10:15:17 +00:00
imp
7e23517415 Zero out the ccb's alloated on the stack for the dump routines to more
closely match a ccb returned from xpt_get_ccb().

Sponsored by: Netflix
2017-10-15 23:54:04 +00:00
imp
51fd064bd8 Add comment about where we need to place this routine, and why.
Sponsored by: Netflix
2017-08-28 19:25:49 +00:00
sbruno
e063f40b57 Add 4k and NCQ_TRIM_BROKEN quirks for Samsung 845 SSDs.
Submitted by:	 hannula@gmail.com
Differential Revision:	https://reviews.freebsd.org/D7967
2017-07-13 16:56:26 +00:00
sbruno
8558e34ec9 Add 4K quirks for Samsung 750 EVO SSD
Submitted by:	lev
Reviewed by:	mav
Differential Revision:	https://reviews.freebsd.org/D9478
2017-07-13 15:33:08 +00:00
ken
7092f4f7ec In scsi_zbc_in(), fill in the length in the ZBC IN CDB.
Without the allocation length set, the target will either reject
the command or complete it without transferring any data.

This fixes the REPORT ZONES command for SCSI ZBC protocol devices,
as well as ATA ZAC protocol devices that are behind a SCSI to ATA
translation layer.  (LSI/Broadcom's 12Gb SAS adapters translate ZBC
commands to ZAC commands.)  Those are Host Aware and Host Managed SMR
drives.

This will fix REPORT ZONE commands sent to the da(4) driver via the
GEOM bio interface and zonectl, and REPORT ZONE commands sent from
camcontrol(8).

Note that in the case of camcontrol(8), we currently only send
SCSI ZBC commands to native SCSI protocol devices, not ATA devices
behind a SAT layer.

sys/cam/scsi/scsi_da.c:
	Fill in the length field in scsi_zbc_in().

MFC after:	3 days
Sponsored by:	Spectra Logic
2017-06-27 17:55:25 +00:00
wma
21a27c0257 Introduce Genesys GL3224 quirks
The Genesys chip is failing when issueing READ_CAP(16) command.
Force a quirk to disable it and use READ_CAP(10) instead.

Also, depending on used firmware, GL3224 can be recognized
either as 'storage device' or 'mass storage class' -
enable both variants in scsi_quirk_table.

Submitted by:    Wojciech Macek <wma@semihalf.com>
                 Konrad Adamczyk <ka@semihalf.com>
Obtained from:   Semihalf
Sponsored by:    Stormshield
Reviewed by:     mav
Differential revision: https://reviews.freebsd.org/D10902
2017-05-29 09:22:53 +00:00
scottl
3c68a83eac Reorder the minimum_cmd_size code to make it a little smaller and
easier to read.
2017-04-20 20:46:34 +00:00
scottl
f9a9b98362 Add infrastructure to the ATA and SCSI transports that supports
using a driver-supplied sbuf for printing device discovery
announcements. This helps ensure that messages to the console
will be properly serialized (through sbuf_putbuf) and not be
truncated and interleaved with other messages. The
infrastructure mirrors the existing xpt_announce_periph()
entry point and is opt-in for now. No content or formatting
changes are visible to the operator other than the new coherency.

While here, eliminate the stack usage of the temporary
announcement buffer in some of the drivers. It's moved to the
softc for now, but future work will eliminate it entirely by
making the code flow more linear. Future work will also address
locking so that the sbufs can be dynamically sized.

The scsi_da, scs_cd, scsi_ses, and ata_da drivers are converted
at this point, other drivers can be converted at a later date.
A tunable+sysctl, kern.cam.announce_nosbuf, exists for testing
purposes but will be removed later.

TODO:
Eliminate all of the code duplication and temporary buffers.  The
old printf-based methods will be retired, and xpt_announce_periph()
will just be a wrapper that uses a dynamically sized sbuf.  This
requires that the register and deregister paths be made malloc-safe,
which they aren't currently.

Sponsored by:	Netflix
2017-04-19 15:04:52 +00:00
cem
4087477929 da(4): Fix a TRIM regression introduced in r308155
According to Warner, multiple TRIM BIOs are collapsed into a single CCB with
NULL bp.  It is invalid to biotrack() NULL, and results in a fault.  So,
don't do that.

Reported by:	asomers@
Sponsored by:	Dell EMC Isilon
2017-04-18 21:05:05 +00:00