* In mesh_recv_indiv_data_to_fwd update route entry for both meshDA and meshSA;
* In mesh_recv_indiv_data_to_me update route entry for meshSA;
* in ieee80211_mesh_rt_update put code so that a proxy entry that is gated
by us (number of hops == 0) is never invalidated;
* Fixed so that we always call ieee80211_mesh_rt_update with lifetime in ms;
Approved by: adrian
* Modified HWMP PREP/PREQ to contain a proxy entry and also changed PREP
frame processing according to amendment as following:
o Fixed PREP to always update/create if acceptance criteria is meet;
o PREQ processing to reply if request is for a proxy entry that is
proxied by us;
o Removed hwmp_discover call from PREQ, because sending a PREP will
build the forward path, and by receving and accepting a PREQ we
have already built the reverse path (non-proactive code);
* Disabled code for pro-active in PREP for now (will make a separate patch for
pro-active HWMP routing later)
* Added proxy information for a Mesh route, mesh gate to use and proxy seqno;
* Modified ieee80211_encap according to amendment;
* Introduced Mesh control address extension enum and removed unused struct,
also rename some structure element names.
* Modified mesh_input and added mesh_recv_* that should verify and process mesh
data frames according to 9.32 Mesh forwarding framework in amendment;
* Modified mesh_decap accordingly to changes done in mesh control AE struct;
Approved by: adrian
* Introduced ieee80211_mesh_rt_update that updates a route with the
maximum(lifetime left, new lifetime);
* Modified ieee80211_mesh_route struct by adding a lock that will be used
by both ieee80211_mesh_rt_update and precursor code (added in future commit);
* Modified in ieee80211_hwmp.c HWMP code to use new ieee80211_mesh_rt_update;
* Modified mesh_rt_flush_invalid to use new ieee80211_mesh_rt_update;
* mesh_rt_flush also checks that lifetime == 0, this gives route discovery
a change to complete;
* Modified mesh_recv_mgmt case IEEE80211_FC0_SUBTYPE_BEACON:
when ever we received a beacon from a neighbor we update route lifetime;
Approved by: adrian
* Added IEEE80211_MESH_MAX_NEIGHBORS and it is set to 15, same as before;
* Modified mesh_parse_meshpeering_action to verify MPM frame and send
correct reason code for when a frame is rejected according to standard spec;
* Modified mesh_recv_action_meshpeering_* according to the standard spec;
* Modified mesh_peer_timeout_cb to always send CLOSE frame when in CONFIRMRCV
state according to the standard spec;
Approved by: adrian
* Old struct ieee80211_meshpeer_ie had wrong peer_proto field size;
* Added IEEE80211_MPM_* size macros;
* Created an enum for the Mesh Peering Protocol Identifier field according
to the standard spec and removed old defines;
* Abbreviated Handshake Protocol is not used by the standard anymore;
* Modified mesh_verify_meshpeer to use IEEE80211_MPM_* macros for verification;
* Modified mesh_parse_meshpeering_action to parse complete frame, also to parse
it according to the standard spec;
* Modified ieee80211_add_meshpeer to construct correct MPM frames according to
the standard spec;
Approved by: adrian
* Added new action category IEEE80211_ACTION_CAT_SELF_PROT which is used by 11s
for Mesh Peering Management;
* Updated Self protected enum Action codes to start from 1 instead of 0
according to the standard spec;
* Removed old and wrong action categories IEEE80211_ACTION_CAT_MESHPEERING;
* Modified ieee80211_mesh.c and ieee80211_action.c to use the new action
category code;
* Added earlier verification code in ieee80211_input;
Approved by: adrian
- fixed an incorrect lock status issue.
- fixed an incorrect lock issue of unionfs root vnode removed.
(pointed out by keith)
- fixed an infinity loop issue.
(pointed out by dumbbell)
- changed to do LK_RELEASE expressly when unlocked.
Submitted by: ozawa@ongs.co.jp
arge1 still works (it's the standalone PHY) but arge0 and the other switch
ports don't work. They're enumerated though, demonstrating that the
mdiobus abstraction is correctly working.
This is only done if the ARGE_MDIO option is included.
* Shuffle the arge MDIO bus into a separate device, that needs to be
probed early (use hint.argemdio.X.order=0)
* hint.arge.X.mdio now specifies which miiproxy to rendezvous with.
* Call MAC/MDIO bus init during MDIO attach, not arge attach.
This is done regardless:
* Shift the arge MAC and MDIO bus reset code into separate functions
and call it early during MDIO bus attach. It's required for
correct MDIO bus IO to occur on AR71xx/AR91xx devices.
* Remove the AR71xx/AR91xx centric assumption that there's only one
MDIO bus. The initial code mapped miibus0(arge0) and miibus1(arge1)
MII register operations to the MII0 (arge0) register space. The
AR724x (and later, upcoming chipsets) have two MDIO busses and
the second is very much in use.
TODO:
* since the multiphy behaviour has changed (where now a phymask of >1
PHY will still be enumerated), multiphy setups may be quite wrong.
I'll go and fix these so they still have a chance of working, at least.
until the switch PHY support appears in -HEAD.
Submitted by: Stefan Bethke <stb@lassitu.de>
MDIO/MII rendezvous proxy.
* Add an 'mdio' bus, which is the "IO" side of an MII bus (but by design
can be anything which implements the underlying register access API.)
* Add 'miiproxy' and 'mdioproxy', which provides a rendezvous mechanism
for MII busses to appear hanging off arbitrary busses (ie, that aren't
necessarily a traditional looking MII bus.)
MII busses can now hang off anything that implements an mdiobus.
For the AR71xx SoC, there's one MDIO bus but two MII busses. So to
properly support two or more real PHYs, this can be done:
# arge0 MDIO bus - there's no arge1 MDIO bus for AR71xx
hint.argemdio.0.at="nexus0"
hint.argemdio.0.maddr=0x19000000
hint.argemdio.0.msize=0x1000
hint.argemdio.0.order=0
# Create two mdioproxy instances
hint.mdioproxy.0.at="mdio0"
hint.mdioproxy.1.at="mdio0"
# .. and with a follow-up patch
hint.arge.0.mdio=mdioproxy0
hint.arge.1.mdio=mdioproxy0
TODO:
* Do a sweep or two and add appropriate locking in mdio/mdioproxy/miiproxy.
Submitted by: Stefan Bethke <stb@lassitu.de>
Reviewed by: ray
defined by the SNIA Common RAID Disk Data Format Specification v2.0.
Supports multiple volumes per array and multiple partitions per disk.
Supports standard big-endian and Adaptec's little-endian byte ordering.
Supports all single-layer RAID levels. Dual-layer RAID levels except
RAID10 are not supported now because of GEOM RAID design limitations.
Some work is still to be done, but the present code already manages basic
interoperation with RAID BIOS of the Adaptec 1430SA SATA RAID controller.
MFC after: 1 month
Sponsored by: iXsystems, Inc.
Olympus FE-210 camera
LG UP3S MP3 player
Laser MP3-2GA13 MP3
PR: usb/119201
Submitted by: Peter Jeremy <peterjeremy@optushome.com.au>
Approved by: cperciva
MFC after: 1 week
This will give you more bandwidth for isochronous
FULL speed applications connected through a
High Speed HUB.
This patch has been tested with XHCI and EHCI.
MFC after: 1 week
in the HAL. That's very memory hungry (32k just for channel statistics)
which would be better served by keeping a summary in the ANI state.
Or, later, keep a survey history in net80211.
So:
* Migrate the ah_chansurvey array to be a single entry, for the current
channel.
* Change the ioctl interface and ANI code to just reference that.
* Clear the ah_chansurvey array during channel reset, both in the AR5212
and AR5416 reset path.
* Always call ar5416GetListenTime()
* Modify ar5416GetListenTime() to:
+ don't update the ANI state if there isn't any ANI state;
+ don't update the channel survey state if there's no active
channel - just to be paranoid
+ copy the channel survey results into the current sample slot
based on the current channel; then increment the sample counter
and sample history counter.
* Modify ar5416GetMIBCyclesPct() to simply return a HAL_SURVEY_SAMPLE,
rather than a set of percentages. The ANI code wasn't using the
percentages anyway.
TODO:
* Create a new function which fetches the survey results periodically
* .. then modify the ANI code to use the pre-fetched values rather than
fetching them again
* Roll the 11n ext busy function from ar5416_misc.c to update all the
counters, then do the result calculation
* .. then, modify the MIB counter routine to correctly fetch a snapshot -
freeze the counters, fetch the values, then reset the counters.
The reference driver has a 3ms delay for the AR9130 but I'm not as yet
sure why. From what I can gather, it's likely waiting for some FIFO
flush to occur.
At some point in the future it may be worthwhile adding a WMAC
FIFO flush here, but that'd require some side-call through to the SoC
DDR flush routines.
Obtained from: Atheros
guarantees on acquire for the tlbie mutex. Conversely, the TLB invalidation
sequence provides guarantees that do not need to be redundantly applied on
release. Roll a small custom lock that is just right. Simultaneously,
convert the SLB tree changes back to lwsync, as changing them to sync
was a misdiagnosis of the tlbie barrier problem this commit actually fixes.
do not include file attributes in the reply to an NFS create RPC
under certain circumstances.
This resulted in a vnode of type VNON that was not usable.
This patch adds an NFS getattr RPC to nfs_create() for this case,
to fix the problem. It was tested by the person that reported
the problem and confirmed to fix this case for their server.
Tested by: Steven Haber (steven.haber at isilon.com)
MFC after: 2 weeks
ZFS volume is exported via the new NFS server. The leak occurred
because the new NFS server code didn't handle the case where
a file system sets the SAVENAME flag in its VOP_LOOKUP() and
ZFS does this for the DELETE case.
Tested by: Oliver Brandmueller (ob at gruft.de), hrs
PR: kern/167266
MFC after: 1 month
discrepancy between modules and kernel, but deal with SMP differences
within the functions themselves.
As an added bonus this also helps in terms of code readability.
Requested by: gibbs
Reviewed by: jhb, marius
MFC after: 1 week
to follow the example of OpenSolaris and its descendants, which implemented
cpu as an inline that took a value out of curthread. At certain points in
the FreeBSD scheduler curthread->td_oncpu will no longer be valid (in
particukar, just before the thread gets descheduled) so instead I have
implemented this as its own built-in variable.
Sponsored by: Sandvine Inc.
MFC after: 1 week
and voltage sensor, TWSI is used to get sensor data. msk(4) does
not monitor these sensors and interrupt for TWSI completion is
disabled by default.
However, due to unknown reason, the TWSI completion interrupt fires
and it resulted in interrupt storm. To fix it, acknowledges the
TWSI completion interrupt if driver see the event. Given that not
all Yukon II controllers show the issue it could be a silicon bug
which does not honor interrupt masking.
Probably the right way to address the issue is disabling automatic
TWSI cycle initiation against these sensors. It would be even
better to implement reading voltage/temperature from the NIC but it
requires access to National LM80 through TWSI and documentation to
do that is not available yet(probably will never happen).
Reported by: jhb
Tested by: jhb
MFC after: 2 weeks
