Erwin ran an exp-run with libcompat and <regexp.h> removed. It turns out
the regexp library is almost entirely unused. In fact, it looks like it
is sometimes used by accident. Because these function names clash with
libc's <regex.h>, some application use both <regex.h> and libcompat,
which means they link against the wrong regex library.
This commit removes the regexp library and reimplements re_comp() and
re_exec() using <regex.h>. It seems the grammar of the regular
expressions accepted by these functions is similar to POSIX EREs.
After this commit, 1 low-profile port will be broken, but the maintainer
already has a patch for it sitting in his mailbox.
These header files only provide functionality that can be used in
combination with libcompat. In order to prevent people from including
them without any actual use (which happens a lot with <sys/timeb.h>),
put a warning here to make people more aware.
This means we have to lower WARNS for libcompat, which is no big deal.
Note that due to e.g. write throttling ('wdrain'), it can stall all the disk
I/O instead of just the device it's configured for. Using it for removable
media is therefore not a good idea.
Reviewed by: pjd (earlier version)
The ttyslot() function was originally part for SUSv1, marked LEGACY in
SUSv2 and removed later on. This function only makes sense when using
utmp(5), because it was used to determine the offset of the record for
the controlling TTY. It makes little sense to keep it here, because the
new utmpx file format doesn't index based on TTY slots.
The utmpx interface is the standardized interface of the user accounting
database. The standard only defines a subset of the functions that were
present in System V-like systems.
I'd like to highlight some of the traits my implementation has:
- The standard allows the on-disk format to be different than the
in-memory representation (struct utmpx). Most operating systems don't
do this, but we do. This allows us to keep our ABI more stable, while
giving us the opportunity to modify the on-disk format. It also allows
us to use a common file format across different architectures (i.e.
byte ordering).
- Our implementation of pututxline() also updates wtmp and lastlog (now
called utx.log and utx.lastlogin). This means the databases are more
likely to be in sync.
- Care must be taken that our implementation discard any fields that are
not applicable. For example, our DEAD_PROCESS records do not hold a
TTY name. Just a time stamp, a record identifier and a process
identifier. It also guarantees that strings (ut_host, ut_line and
ut_user) are null terminated. ut_id is obviously not null terminated,
because it's not a string.
- The API and its behaviour should be conformant to POSIX, but there may
be things that slightly deviate from the standard. This implementation
uses separate file descriptors when writing to the log files. It also
doesn't use getutxid() to search for a field to overwrite. It uses an
allocation strategy similar to getutxid(), but prevents DEAD_PROCESS
records from accumulating.
Make sure libulog doesn't overwrite the manpages shipped with our C
library. Also keep the symbol list in Symbol.map sorted.
I'll bump __FreeBSD_version later this evening. I first want to convert
everything to <utmpx.h> and get rid of <utmp.h>.
now type sema_t is a structure which can be put in a shared memory area,
and multiple processes can operate it concurrently.
User can either use mmap(MAP_SHARED) + sem_init(pshared=1) or use sem_open()
to initialize a shared semaphore.
Named semaphore uses file system and is located in /tmp directory, and its
file name is prefixed with 'SEMD', so now it is chroot or jail friendly.
In simplist cases, both for named and un-named semaphore, userland code
does not have to enter kernel to reduce/increase semaphore's count.
The semaphore is designed to be crash-safe, it means even if an application
is crashed in the middle of operating semaphore, the semaphore state is
still safely recovered by later use, there is no waiter counter maintained
by userland code.
The main semaphore code is in libc and libthr only has some necessary stubs,
this makes it possible that a non-threaded application can use semaphore
without linking to thread library.
Old semaphore implementation is kept libc to maintain binary compatibility.
The kernel ksem API is no longer used in the new implemenation.
Discussed on: threads@
Std 1003.1-2008. Both Linux and Solaris conforms to the new definitions,
so we better follow too (older glibc used old BSDish alphasort prototype
and corresponding type of the comparision function for scandir). While
there, change the definitions of the functions to ANSI C and fix several
style issues nearby.
Remove requirement for "sys/types.h" include for functions from manpage.
POSIX also requires that alphasort(3) sorts as if strcoll(3) was used,
but leave the strcmp(3) call in the function for now.
Adapt in-tree callers of scandir(3) to new declaration. The fact that
select_sections() from catman(1) could modify supplied struct dirent is
a bug.
PR: standards/142255
MFC after: 2 weeks
The <sys/termios.h> header file is hardlinked to <termios.h>. It
contains both the structures and the flag definitions, but also the C
library interface that's implemented by the C library.
This header file has the typical problem of including too many random
things and being badly ordered. Instead of trying to fix this, decompose
it into two header files:
- <sys/_termios.h>, which contains struct termios and the flags.
- <termios.h>, which includes <sys/_termios.h> and contains the C
library interface.
This means userspace has to include <termios.h> for struct termios,
while kernelspace code has to include <sys/tty.h>. Also add a
<sys/termios.h>, which prints a warning message before including
<termios.h>. I am aware that there are some applications that use this
header file as well.
from SUSv4 XSI. Note that the functions are obsoleted, and only
provided to ease porting from System V-like systems. Since sigpause
already exists in compat with different interface, XSI sigpause is
named xsi_sigpause.
Reviewed by: davidxu
MFC after: 3 weeks
controllers. Controller, array, and drive status can be checked, basic
attributes can be changed, and arrays and spares can be created and deleted.
Controller firmware can also be flashed.
This does not replace MegaCLI, found in ports, as that is officially sanctioned
and supported by LSI and includes vastly more functionality. However, mfiutil
is open source and guaranteed to provide basic functionality, which can be
especially useful if you have a problem and can't get MegaCLI to work.
Approved by: re
Obtained from: Yahoo! Inc.
modularize it so that new transports can be created.
Add a transport for SATA
Add a periph+protocol layer for ATA
Add a driver for AHCI-compliant hardware.
Add a maxio field to CAM so that drivers can advertise their max
I/O capability. Modify various drivers so that they are insulated
from the value of MAXPHYS.
The new ATA/SATA code supports AHCI-compliant hardware, and will override
the classic ATA driver if it is loaded as a module at boot time or compiled
into the kernel. The stack now support NCQ (tagged queueing) for increased
performance on modern SATA drives. It also supports port multipliers.
ATA drives are accessed via 'ada' device nodes. ATAPI drives are
accessed via 'cd' device nodes. They can all be enumerated and manipulated
via camcontrol, just like SCSI drives. SCSI commands are not translated to
their ATA equivalents; ATA native commands are used throughout the entire
stack, including camcontrol. See the camcontrol manpage for further
details. Testing this code may require that you update your fstab, and
possibly modify your BIOS to enable AHCI functionality, if available.
This code is very experimental at the moment. The userland ABI/API has
changed, so applications will need to be recompiled. It may change
further in the near future. The 'ada' device name may also change as
more infrastructure is completed in this project. The goal is to
eventually put all CAM busses and devices until newbus, allowing for
interesting topology and management options.
Few functional changes will be seen with existing SCSI/SAS/FC drivers,
though the userland ABI has still changed. In the future, transports
specific modules for SAS and FC may appear in order to better support
the topologies and capabilities of these technologies.
The modularization of CAM and the addition of the ATA/SATA modules is
meant to break CAM out of the mold of being specific to SCSI, letting it
grow to be a framework for arbitrary transports and protocols. It also
allows drivers to be written to support discrete hardware without
jeopardizing the stability of non-related hardware. While only an AHCI
driver is provided now, a Silicon Image driver is also in the works.
Drivers for ICH1-4, ICH5-6, PIIX, classic IDE, and any other hardware
is possible and encouraged. Help with new transports is also encouraged.
Submitted by: scottl, mav
Approved by: re
if the new file mode is the same as it was before; however, this
optimization must be disabled for filesystems that support NFSv4 ACLs.
Chmod uses pathconf(2) to determine whether this is the case - however,
pathconf(2) always follows symbolic links, while the 'chmod -h' doesn't.
This change adds lpathconf(3) to make it possible to solve that problem
in a clean way.
Reviewed by: rwatson (earlier version)
Approved by: re (kib)
dace for UPDv4 sockets bound to INADDR_ANY. Move the code to set
IP_RECVDSTADDR/IP_SENDSRCADDR into svc_dg.c, so that both TLI and non-TLI
users will be using it.
Back out my previous commit to mountd. Turns out the problem was affecting
more than one binary so it needs to me addressed in generic rpc code in
libc in order to fix them all.
Reported by: lstewart
Tested by: lstewart
any open file descriptors >= 'lowfd'. It is largely identical to the same
function on other operating systems such as Solaris, DFly, NetBSD, and
OpenBSD. One difference from other *BSD is that this closefrom() does not
fail with any errors. In practice, while the manpages for NetBSD and
OpenBSD claim that they return EINTR, they ignore internal errors from
close() and never return EINTR. DFly does return EINTR, but for the common
use case (closing fd's prior to execve()), the caller really wants all
fd's closed and returning EINTR just forces callers to call closefrom() in
a loop until it stops failing.
Note that this implementation of closefrom(2) does not make any effort to
resolve userland races with open(2) in other threads. As such, it is not
multithread safe.
Submitted by: rwatson (initial version)
Reviewed by: rwatson
MFC after: 2 weeks
so that the .h files in src/sys/fs/nfs will be installed under
/usr/include/fs/nfs. This will allow the following utilities to
build, once additions and changes for the experimental nfs subsystem
are committed:
usr.sbin/mountd - Once modified to add support for the
experimental nfs subsystem.
ur.sbin/nfsstat - Once modified to add support for the
experimental nfs subsystem.
usr.sbin/nfscbd - The client side callback daemon for NFSv4.
usr.sbin/nfsuserd - The NFSv4 user/group name<->uid/gid mapping daemon.
usr.sbin/nfsdumpstate - The NFSv4 utility for dumping open/lock state.
usr.sbin/nfsrevoke - The sysadmin command for revoking NFSv4 state.
Approved by: kib (mentor)
I've discussed this with the Pth maintainer and no clear solution
has emerged on the ports side of things, so for now, hack around
the issue in signal.h.
This does not include the new hash routines since they will cause problems
when reading old hash files.
Since mpool(3) has been changed, provide a compatibility shim for older
binaries.
Obtained from: OpenBSD
pthread_sigmask() to signal.h. In principle, this shouldn't break anything,
since they're already in signal.h on other systems, and the FreeBSD
manpage says that both pthread.h and signal.h need to be included to
get these functions.
Add a hack to declare pthread_t in the P1003.1-2008 namespace
in signal.h.
in the POSIX namespace, and hiding eaccess() and setproctitle().
Also move mknodat() from unistd.h to sys/stat.h where it belongs.
The *at() syscalls are only in CURRENT, so this shouldn't cause
problems.
__XOPEN_SOURCE >= 700, since mktemp() was withdrawn
from the standard. However, __XSI_VISIBLE is set to
700 in the default BSD envrionment, where mktemp()
should still exist; hence, check for this.
