Something evidently got mangled in my git tree in between testing and
review, as an old and broken version of the patch was apparently submitted
to svn. Revert this while I work out what went wrong.
Reported by: tuexen
Pointy hat to: rstone
inet_ntoa() cannot be used safely in a multithreaded environment
because it uses a static local buffer. Remove it from the kernel.
Suggested by: glebius, emaste
Reviewed by: gnn
MFC after: never
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D9625
inet_ntoa() cannot be used safely in a multithreaded environment
because it uses a static local buffer. Instead, use inet_ntoa_r()
with a buffer on the caller's stack.
Suggested by: glebius, emaste
Reviewed by: gnn
MFC after: 2 weeks
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D9625
inet_ntoa() cannot be used safely in a multithreaded environment
because it uses a static local buffer. Instead, use inet_ntoa_r()
with a buffer on the caller's stack.
This code had an INET6 conditional before this commit, but opt_inet6.h
was not included, so INET6 was never defined. Apparently, pf's OS
fingerprinting hasn't worked with IPv6 for quite some time.
This commit might fix it, but I didn't test that.
Reviewed by: gnn, kp
MFC after: 2 weeks
Relnotes: yes (if I/someone can test pf OS fingerprinting with IPv6)
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D9625
Somehow in the late stages of testing my sched_ule patch, a character was
accidentally deleted from the file. Correct this.
While I'm committing anyway, the previous commit message requires some
clarification: in the normal case of unlending priority after releasing
a mutex, the thread that was doing the lending will be woken up and
immediately become the highest-priority thread, and in that case no
priority inversion would take place. However, if that thread is pinned
to a different CPU, then the currently running thread that just had its
priority lowered will not be preempted and then priority inversion can
occur.
Reported by: O. Hartmann (typo), jhb (scheduler clarification)
MFC after: 1 month
Pointy hat to: rstone
When a high-priority thread is waiting for a mutex held by a
low-priority thread, it temporarily lends its priority to the
low-priority thread to prevent priority inversion. When the mutex
is released, the lent priority is revoked and the low-priority
thread goes back to its original priority.
When the priority of that thread is lowered (through a call to
sched_priority()), the schedule was not checking whether
there is now a high-priority thread in the run queue. This can
cause threads with real-time priority to be starved in the run
queue while the low-priority thread finishes its quantum.
Fix this by explicitly checking whether preemption is necessary
when a thread's priority is lowered.
Sponsored by: Dell EMC Isilon
Obtained from: Sandvine Inc
Differential Revision: https://reviews.freebsd.org/D9518
Reviewed by: Jeff Roberson (ule)
MFC after: 1 month
7500 Simplify dbuf_free_range by removing dn_unlisted_l0_blkid
illumos/illumos-gate@653af1b809653af1b809https://www.illumos.org/issues/7500
With the integration of:
commit 0f6d88aded0d165f5954688a9b13bac76c38da84
Author: Alex Reece <alex@delphix.com>
Date: Sat Jul 26 13:40:04 2014 -0800
4873 zvol unmap calls can take a very long time for larger datasets
the dnode's dn_bufs field was changed from a list to a tree. As a result,
the dn_unlisted_l0_blkid field is no longer necessary.
Author: Stephen Blinick <stephen.blinick@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com>
but it allows to use 64 bit linux strace(1) on 64 bit linux binaries.
Reviewed by: dchagin (earlier version)
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D9406
Right now this is not critical, but will be after planned increase of
MNAMELEN from 88 to 1k.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
While a new bit was added and thread alignment got shifted to accomodate it,
RW_READERS_SHIFT was not modified accordingly and clashed with the new flag.
This was surprisingly harmless. If the lock was taken for writing, other flags
were tested. If the lock was taken for reading, it would correctly work for
readers > 1 and this was the only relevant test performed.
machines, only a few 486 machines that used it, and those haven't had
enough memory to run FreeBSD for quite some time (often limited to
16MB).
Not to be confused with the Machine Check Architecture, which is still
very much alive and used (and untouched by this commit).
No Objection From: arch@
I found that at least with Chelsio NICs TOE sockets quite often report
negative sbspace() values. Using unsigned variable to store it resulted
in attempts to aggregate too much data in one sosend() call, that caused
errors and following connection termination.
MFC after: 2 weeks
The {powerpc,powerpc64,sparc64} LINT kernel builds fail with this error:
sys/dev/vt/vt_buf.c:198: warning: 'vtbuf_htw' defined but not used
Move vtbuf_htw() inside the '#if SC_NO_CUTPASTE' block where it belongs, and
put it in the proper order.
This fixes the immedate issue w/ vt(4), but all three then fail on different
issues.
Reviewed by: emaste
It's not a proper fix, but should be better than what we have now.
Since it got broken some six months ago it results in an incredibly
annoying and trivially reproducible panic every time eg an USB disk
gets disconnected.
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
interrupt arrives in fork_trampoline after sp_el0 was written we may then
switch to a new thread, enter userland so change this stack pointer, then
return to this code with the wrong value. This fixes this case by moving
the load of sp_el0 until after interrupts have been disabled.
Reported by: Mark Millard (markmi@dsl-only.net)
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D9593
Current bxe probe function won't attach to devices with the NetXtreme II
BCM57840 2x20GbE chip, enable it by adding it's chip ID to the list of
supported chips.
Tested on: HP ProLiant WS460c Gen9
Reviewed by: gnn
MFC after: 1 week
Sponsored by: Citrix Systems R&D
Differential Revision: https://reviews.freebsd.org/D9609
we will import a newer version of the Linux code so the linuxkpi was not
used.
This is still missing 10G support, and multicast has not been tested.
Reviewed by: gnn
Obtained from: ABT Systems Ltd
Sponsored by: SoftIron Inc
Differential Revision: https://reviews.freebsd.org/D8549
On laptops like the ThinkPad X240, ClickPad buttons are located at the
top. The hw.psm.synaptics.softbuttons_y sysctl was supposed to allow this
by setting the value to a negative one (e.g. -1700). However, the
condition was wrong (double negative), and doing that placed the buttons
in an unreachable area.
PR: 216342
Submitted by: Greg V <greg@unrelenting.technology>
MFC after: 1 week
This effectively provides the same benefit as applying MADV_FREE inline
upon every execve, since the page daemon invokes lowmem handlers prior to
scanning the inactive queue. It also has less overhead; the cost of
applying MADV_FREE is very noticeable on many-CPU systems since it includes
that of a TLB shootdown of global PTEs. For instance, this change nearly
halves the system CPU usage during a buildkernel on a 128-vCPU EC2
instance (with some other patches applied).
Benchmarked by: cperciva (earlier version)
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D9586
This solves several problems.
First of all, cmc_throttle is specified in seconds and there was no
conversion between ticks and seconds when they were mixed together.
Second, we avoid potential problems with ticks wrapping around.
Resolution of time_uptime should be sufficient for the throttling
purposes.
Discussed with: jhb
MFC after: 12 days
Previously, if the threshold was changed, then MC_CTL2_CMCI_EN would get
cleared and the logic would switch to the polling only mode.
Discussed with: jhb
MFC after: 2 weeks
getdents64() with wrapper over kern_getdirentries().
The patch was originally written by emaste@ and then adapted by trasz@
and me.
Note:
1. I divided linux_getdents() and linux_readdir() as in case when the
getdents() called with count = 1 (readdir() case) it can overwrite
user stack (by writing to user buffer pointer more than 1 byte).
2. Linux returns EINVAL in case when user supplied buffer is not enough
to contain fetched dirent.
3. Linux returns ENOTDIR in case when fd points to not a directory.
Reviewed by: trasz@
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D2210
All this code is based on assumption that data will be stored in one piece,
and since buffer size if known and fixed, it is easier to hardcode it.
MFC after: 2 weeks
This patch adds a new function to the server krpc called
svcpool_close(). It is similar to svcpool_destroy(), but does not free
the data structures, so that the pool can be used again.
This function is then used instead of svcpool_destroy(),
svcpool_create() when the nfsd threads are killed.
PR: 204340
Reported by: Panzura
Approved by: rmacklem
Obtained from: rmacklem
MFC after: 1 week
Define them as RLIM_INFINITY. This is allowed by POSIX in case all
resource limits are representable in an object of type rlim_t. Since
we do not allow negative rlim_t, with some strength this definition is
conforming.
We are not conforming fully still because POSIX requires rlim_t to be
unsigned type. Fixing this without breaking ABI to redefine
RLIM_INFINITY is impossible.
PR: 209729
Submitted by: bltsrc@mail.ru
Exp-run done by: antoine
MFC after: 2 weeks
Since locks are dropped when a thread suspends, it's possible for another
thread to deliver a signal to the suspended thread. If the thread awakens from
suspension without checking for signals, it may go to sleep despite having
a pending signal that should wake it up. Therefore the suspension check is
done first, so any signals sent while suspended will be caught in the
subsequent signal check.
Reviewed by: kib
Approved by: kib (mentor)
MFC after: 2 weeks
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D9530
In general case m_pullup() does not really guarantee any data alignment.
Instead of depenting on side effects caused by data being always copied
out of mbuf cluster (which is probably a bug by itself), always allocate
aligned BHS buffer and read data there directly from socket.
While there, reuse new icl_conn_receive_buf() function to read digests.
The code could probably be even more optimized to aggregate those reads,
but until that done, this is still easier then the way it was before.
MFC after: 2 weeks
