this is a low-functionality change that changes the kernel to access the main
thread of a process via the linked list of threads rather than
assuming that it is embedded in the process. It IS still embeded there
but remove all teh code that assumes that in preparation for the next commit
which will actually move it out.
Reviewed by: peter@freebsd.org, gallatin@cs.duke.edu, benno rice,
some time. _All_ packets, regardless of destination, were accepted by
the machine as if addressed to it.
Jump back to 'pass' processing for a teed packet instead of falling
through as if it was ours.
PR: kern/31130
Reviewed by: -net, luigi
MFC after: 2 weeks
- Clear the cached destination before getting another cached route.
Otherwise, garbage in the padding space (which might be filled in if it was
used for IPv4) could annoy rtalloc.
Obtained from: KAME
(We should be able to handle locally originated IP packets, and
these do not have m_pkthdr.rcvif set.)
PR: kern/32806, kern/33766
Reviewed by: luigi
Fix tested by: Maxim Konovalov <maxim@macomnet.ru>,
Erwin Lansing <erwin@lansing.dk>
The following steps are involved:
a) the IP options related to routing (LSRR and SSRR) are processed
as though the router were a host,
b) the other IP options are processed as usual only if the packet
is destined for the router; otherwise they are ignored.
PR: kern/23123
Discussed in: freebsd-hackers
An old route will be NULL at that point if a packet were initially
routed to an interface (using the IP_ROUTETOIF flag.)
Submitted by: Igor Timkin <ivt@gamma.ru>
All TCP ISNs that are sent out are valid cookies, which allows entries
in the syncache to be dropped and still have the ACK accepted later.
As all entries pass through the syncache, there is no sudden switchover
from cache -> cookies when the cache is full; instead, syncache entries
simply have a reduced lifetime. More details may be found in the
"Resisting DoS attacks with a SYN cache" paper in the Usenix BSDCon 2002
conference proceedings.
Sponsored by: DARPA, NAI Labs
Now that we've increased the size of our send / receive buffers, bursting
an entire window onto the network may cause congestion. As a result,
we will slow start beginning with a flightsize of 4 packets.
Problem reported by: Thomas Zenker <thz@Lennartz-electronic.de>
MFC after: 3 days
Easily exploitable by flood pinging the target
host over an interface with the IFF_NOARP flag
set (all you need to know is the target host's
MAC address).
MFC after: 0 days
mutable contents of struct prison (hostname, securelevel, refcount,
pr_linux, ...)
o Generally introduce mtx_lock()/mtx_unlock() calls throughout kern/
so as to enforce these protections, in particular, in kern_mib.c
protection sysctl access to the hostname and securelevel, as well as
kern_prot.c access to the securelevel for access control purposes.
o Rewrite linux emulator abstractions for accessing per-jail linux
mib entries (osname, osrelease, osversion) so that they don't return
a pointer to the text in the struct linux_prison, rather, a copy
to an array passed into the calls. Likewise, update linprocfs to
use these primitives.
o Update in_pcb.c to always use prison_getip() rather than directly
accessing struct prison.
Reviewed by: jhb
receiver was not sending an immediate ack with delayed acks turned on
when the input buffer is drained, preventing the transmitter from
restarting immediately.
Propogate the TCP_NODELAY option to accept()ed sockets. (Helps tbench and
is a good idea anyway).
Some cleanup. Identify additonal issues in comments.
MFC after: 1 day
o Hide nonstandard functions and types in <netinet/in.h> when
_POSIX_SOURCE is defined.
o Add some missing types (required by POSIX.1-200x) to <netinet/in.h>.
o Restore vendor ID from Rev 1.1 in <netinet/in.h> and make use of new
__FBSDID() macro.
o Fix some miscellaneous issues in <arpa/inet.h>.
o Correct final argument for the inet_ntop() function (POSIX.1-200x).
o Get rid of the namespace pollution from <sys/types.h> in
<arpa/inet.h>.
Reviewed by: fenner
Partially submitted by: bde
interface address, blow the address away again before returning the
error.
In in_ifinit(), if we get an error from rtinit() and we've also got
a destination address, return the error rather than masking EEXISTS.
Failing to create a host route when configuring an interface should
be treated as an error.
received on an interface without an IP address, try to find a
non-loopback AF_INET address to use. If that fails, drop it.
Previously, we used the address at the top of the in_ifaddrhead list,
which didn't make much sense, and would cause a panic if there were no
AF_INET addresses configured on the system.
PR: 29337, 30524
Reviewed by: ru, jlemon
Obtained from: NetBSD
for passive mode data connections (PASV/EPSV -> 227/229). Well,
the actual punching happens a bit later, when the aliasing link
becomes fully specified.
Prodded by: Danny Carroll <dannycarroll@hotmail.com>
MFC after: 1 week
to be followed by nfsnodehashtbl, so bzeroing callouts beyond the end of
tcp_syncache soon caused a null pointer panic when nfsnodehashtbl was
accessed.
vnodes. This will hopefully serve as a base from which we can
expand the MP code. We currently do not attempt to obtain any
mutex or SX locks, but the door is open to add them when we nail
down exactly how that part of it is going to work.
sysctl_req', which describes in-progress sysctl requests. This permits
sysctl handlers to have access to the current thread, permitting work
on implementing td->td_ucred, migration of suser() to using struct
thread to derive the appropriate ucred, and allowing struct thread to be
passed down to other code, such as network code where td is not currently
available (and curproc is used).
o Note: netncp and netsmb are not updated to reflect this change, as they
are not currently KSE-adapted.
Reviewed by: julian
Obtained from: TrustedBSD Project
"[...] and removes the hostcache code from standard kernels---the
code that depends on it is not going to happen any time soon,
I'm afraid."
Time to clean up.
called and ip_output() encounters an error and bails (i.e. host
unreachable), we will leak an mbuf. This is because the code calls
m_freem(m0) after jumping to the bad: label at the end of the function,
when it should be calling m_freem(m). (m0 is the original mbuf list
_without_ the options mbuf prepended.)
Obtained from: NetBSD
ifconfig, which expects the address returned by the SIOCGIFNETMASK ioctl
to have a valid sa_family. Similar changes may be necessary for IPv6.
While we're here, get rid of an unnecessary temp variable.
MFC after: 2 weeks
is calculated. this caused some trouble in the code which the ip header
is not modified. for example, inbound policy lookup failed.
Obtained from: KAME
MFC after: 1 week
Have sys/net/route.c:rtrequest1(), which takes ``rt_addrinfo *''
as the argument. Pass rt_addrinfo all the way down to rtrequest1
and ifa->ifa_rtrequest. 3rd argument of ifa->ifa_rtrequest is now
``rt_addrinfo *'' instead of ``sockaddr *'' (almost noone is
using it anyways).
Benefit: the following command now works. Previously we needed
two route(8) invocations, "add" then "change".
# route add -inet6 default ::1 -ifp gif0
Remove unsafe typecast in rtrequest(), from ``rtentry *'' to
``sockaddr *''. It was introduced by 4.3BSD-Reno and never
corrected.
Obtained from: BSD/OS, NetBSD
MFC after: 1 month
PR: kern/28360
a single kern.security.seeotheruids_permitted, describes as:
"Unprivileged processes may see subjects/objects with different real uid"
NOTE: kern.ps_showallprocs exists in -STABLE, and therefore there is
an API change. kern.ipc.showallsockets does not.
- Check kern.security.seeotheruids_permitted in cr_cansee().
- Replace visibility calls to socheckuid() with cr_cansee() (retain
the change to socheckuid() in ipfw, where it is used for rule-matching).
- Remove prison_unpcb() and make use of cr_cansee() against the UNIX
domain socket credential instead of comparing root vnodes for the
UDS and the process. This allows multiple jails to share the same
chroot() and not see each others UNIX domain sockets.
- Remove unused socheckproc().
Now that cr_cansee() is used universally for socket visibility, a variety
of policies are more consistently enforced, including uid-based
restrictions and jail-based restrictions. This also better-supports
the introduction of additional MAC models.
Reviewed by: ps, billf
Obtained from: TrustedBSD Project
to send all its data, especially when the data is less than one MSS.
This fixes an issue where the stack was delaying the sending
of data, eventhough there was enough window to send all the data and
the sending of data was emptying the socket buffer.
Problem found by Yoshihiro Tsuchiya (tsuchiya@flab.fujitsu.co.jp)
Submitted by: Jayanth Vijayaraghavan
kern.ipc.showallsockets is set to 0.
Submitted by: billf (with modifications by me)
Inspired by: Dave McKay (aka pm aka Packet Magnet)
Reviewed by: peter
MFC after: 2 weeks
+ implement "limit" rules, which permit to limit the number of sessions
between certain host pairs (according to masks). These are a special
type of stateful rules, which might be of interest in some cases.
See the ipfw manpage for details.
+ merge the list pointers and ipfw rule descriptors in the kernel, so
the code is smaller, faster and more readable. This patch basically
consists in replacing "foo->rule->bar" with "rule->bar" all over
the place.
I have been willing to do this for ages!
MFC after: 1 week
not referenced in Stevens, and does not compile with g++.
There is an equivalent structure, struct ipoption in ip_var.h
which is actually used in various parts of the kernel, and also referenced
in Stevens.
Bill Fenner also says:
... if you want the trivia, struct ip_opts was introduced
in in.h SCCS revision 7.9, on 6/28/1990, by Mike Karels.
struct ipoption was introduced in ip_var.h SCCS revision 6.5,
on 9/16/1985, by... Mike Karels.
MFC-after: 3 days
NAT in extended passive mode if the server's public IP address was
different from the main NAT address. This caused a wrong aliasing
link to be created that did not route the incoming packets back to
the original IP address of the server.
natd -v -n pub0 -redirect_address localFTP publicFTP
Note that even if localFTP == publicFTP, one still needs to supply
the -redirect_address directive. It is needed as a helper because
extended passive mode's 229 reply does not contain the IP address.
MFC after: 1 week
and speed. No new functionality added (yet) apart from a bugfix.
MFC will occur in due time and probably in stages.
BUGFIX: fix a problem in old code which prevented reallocation of
the hash table for dynamic rules (there is a PR on this).
OTHER CHANGES: minor changes to the internal struct for static and dynamic rules.
Requires rebuild of ipfw binary.
Add comments to show how data structures are linked together.
(It probably makes no sense to keep the chain pointers separate
from actual rule descriptors. They will be hopefully merged soon.
keep a (sysctl-readable) counter for the number of static rules,
to speed up IP_FW_GET operations
initial support for a "grace time" for expired connections, so we
can set timeouts for closing connections to much shorter times.
merge zero_entry() and resetlog_entry(), they use basically the
same code.
clean up and reduce replication of code for removing rules,
both for readability and code size.
introduce a separate lifetime for dynamic UDP rules.
fix a problem in old code which prevented reallocation of
the hash table for dynamic rules (PR ...)
restructure dynamic rule descriptors
introduce some local variables to avoid multiple dereferencing of
pointer chains (reduces code size and hopefully increases speed).
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.
Sorry john! (your next MFC will be a doosie!)
Reviewed by: peter@freebsd.org, dillon@freebsd.org
X-MFC after: ha ha ha ha
new data is acknowledged, reset the dupacks to 0.
The problem was spotted when a connection had its send buffer full
because the congestion window was only 1 MSS and was not being incremented
because dupacks was not reset to 0.
Obtained from: Yahoo!
to the application as a RST would, this way we're compatible with the most
applications.
MFC candidate.
Submitted by: Scott Renfro <scott@renfro.org>
Reviewed by: Mike Silbersack <silby@silby.com>
about rules and dynamic rules. it later fills this buffer with these
rules.
it also takes the opporunity to compare the expiration of the dynamic
rules with the current time and either marks them for deletion or simply
charges the countdown.
unfortunatly it does this all (the sizing, the buffer copying, and the
expiration GC) with no spl protection whatsoever. it was possible for
the dynamic rule(s) to be ripped out from under the request before it
had completed, resulting in corrupt memory dereferencing.
Reviewed by: ps
MFC before: 4.4-RELEASE, hopefully.
In order to ensure security and functionality, RFC 1948 style
initial sequence number generation has been implemented. Barring
any major crypographic breakthroughs, this algorithm should be
unbreakable. In addition, the problems with TIME_WAIT recycling
which affect our currently used algorithm are not present.
Reviewed by: jesper
cdevsw entries have been for a long time.
Discover that we now have two version sof the same structure.
I will shoot one of them shortly when I figure out why someone thinks
they need it. (And I can prove they don't)
(netinet/ipprotosw.h should GO AWAY)
Avoid using parenthesis enclosure macros (.Pq and .Po/.Pc) with plain text.
Not only this slows down the mdoc(7) processing significantly, but it also
has an undesired (in this case) effect of disabling hyphenation within the
entire enclosed block.
making pcbs available to the outside world. otherwise, we will see
inpcb without ipsec security policy attached (-> panic() in ipsec.c).
Obtained from: KAME
MFC after: 3 days
- Use sysctl to export stats
- Use ip_encap.c's encapsulation support
- Update lkm to kld (is 6 years a record for a broken module?)
- Remove some unused cruft
This macro was supposed to only match local IP addresses of
interfaces, and all consumers of this macro assume this as
well. (See IP_MULTICAST_IF and IP_ADD_MEMBERSHIP socket
options in the ip(4) manpage.)
This fixes a major security breach in IPFW-based firewalls
where the `me' keyword would match the other end of a P2P
link.
PR: kern/28567
This should help us in nieve benchmark "tests".
It seems a wide number of people think 32k buffers would not cause major
issues, and is in fact in use by many other OS's at this time. The
receive buffers can be bumped higher as buffers are hardly used and several
research papers indicate that receive buffers rarely use much space at all.
Submitted by: Leo Bicknell <bicknell@ufp.org>
<20010713101107.B9559@ussenterprise.ufp.org>
Agreed to in principle by: dillon (at the 32k level)
generation scheme. Users may now select between the currently used
OpenBSD algorithm and the older random positive increment method.
While the OpenBSD algorithm is more secure, it also breaks TIME_WAIT
handling; this is causing trouble for an increasing number of folks.
To switch between generation schemes, one sets the sysctl
net.inet.tcp.tcp_seq_genscheme. 0 = random positive increments,
1 = the OpenBSD algorithm. 1 is still the default.
Once a secure _and_ compatible algorithm is implemented, this sysctl
will be removed.
Reviewed by: jlemon
Tested by: numerous subscribers of -net
RTF_DYNAMIC route, it got freed twice). I am not sure what was
the actual problem in 1992, but the current behavior is memory
leak if PCB holds a reference to a dynamically created/modified
routing table entry. (rt_refcnt>0 and we don't call rtfree().)
My test bed was:
1. Set net.inet.tcp.msl to a low value (for test purposes), e.g.,
5 seconds, to speed up the transition of TCP connection to a
"closed" state.
2. Add a network route which causes ICMP redirect from the gateway.
3. ping(8) host H that matches this route; this creates RTF_DYNAMIC
RTF_HOST route to H. (I was forced to use ICMP to cause gateway
to generate ICMP host redirect, because gateway in question is a
4.2-STABLE system vulnerable to a problem that was fixed later in
ip_icmp.c,v 1.39.2.6, and TCP packets with DF bit set were
triggering this bug.)
4. telnet(1) to H
5. Block access to H with ipfw(8)
6. Send something in telnet(1) session; this causes EPERM, followed
by an in_losing() call in a few seconds.
7. Delete ipfw(8) rule blocking access to H, and wait for TCP
connection moving to a CLOSED state; PCB is freed.
8. Delete host route to H.
9. Watch with netstat(1) that `rttrash' increased.
10. Repeat steps 3-9, and watch `rttrash' increases.
PR: kern/25421
MFC after: 2 weeks
only do getcred calls for sockets which were created in the same jail.
This should allow the ident to work in a reasonable way within jails.
PR: 28107
Approved by: des, rwatson
connection. The information contained in a tcptemp can be
reconstructed from a tcpcb when needed.
Previously, tcp templates required the allocation of one
mbuf per connection. On large systems, this change should
free up a large number of mbufs.
Reviewed by: bmilekic, jlemon, ru
MFC after: 2 weeks
are duplicated by newly defined types/options in RFC3121
- We have no backward compatibility issue. There is no apps in our
distribution which use the above types/options.
Obtained from: KAME
MFC after: 2 weeks
sizeof(ro_dst) is not necessarily the correct one.
this change would also fix the recent path MTU discovery problem for the
destination of an incoming TCP connection.
Submitted by: JINMEI Tatuya <jinmei@kame.net>
Obtained from: KAME
MFC after: 2 weeks
This work was based on kame-20010528-freebsd43-snap.tgz and some
critical problem after the snap was out were fixed.
There are many many changes since last KAME merge.
TODO:
- The definitions of SADB_* in sys/net/pfkeyv2.h are still different
from RFC2407/IANA assignment because of binary compatibility
issue. It should be fixed under 5-CURRENT.
- ip6po_m member of struct ip6_pktopts is no longer used. But, it
is still there because of binary compatibility issue. It should
be removed under 5-CURRENT.
Reviewed by: itojun
Obtained from: KAME
MFC after: 3 weeks
around, use a common function for looking up and extracting the tunables
from the kernel environment. This saves duplicating the same function
over and over again. This way typically has an overhead of 8 bytes + the
path string, versus about 26 bytes + the path string.
One way we can reduce the amount of traffic we send in response to a SYN
flood is to eliminate the RST we send when removing a connection from
the listen queue. Since we are being flooded, we can assume that the
majority of connections in the queue are bogus. Our RST is unwanted
by these hosts, just as our SYN-ACK was. Genuine connection attempts
will result in hosts responding to our SYN-ACK with an ACK packet. We
will automatically return a RST response to their ACK when it gets to us
if the connection has been dropped, so the early RST doesn't serve the
genuine class of connections much. In summary, we can reduce the number
of packets we send by a factor of two without any loss in functionality
by ensuring that RST packets are not sent when dropping a connection
from the listen queue.
Submitted by: Mike Silbersack <silby@silby.com>
Reviewed by: jesper
MFC after: 2 weeks
A attacker sending a lot of bogus fragmented packets to the target
(with different IPv4 identification field - ip_id), may be able
to put the target machine into mbuf starvation state.
By setting a upper limit on the number of reassembly queues we
prevent this situation.
This upper limit is controlled by the new sysctl
net.inet.ip.maxfragpackets which defaults to 200,
as the IPv6 case, this should be sufficient for most
systmes, but you might want to increase it if you have
lots of TCP sessions.
I'm working on making the default value dependent on
nmbclusters.
If you want old behaviour (no upper limit) set this sysctl
to a negative value.
If you don't want to accept any fragments (not recommended)
set the sysctl to 0 (zero).
Obtained from: NetBSD
MFC after: 1 week
This closes a minor information leak which allows a remote observer to
determine the rate at which the machine is generating packets, since the
default behaviour is to increment a counter for each packet sent.
Reviewed by: -net
Obtained from: OpenBSD
A attacker sending a lot of bogus fragmented packets to the target
(with different IPv4 identification field - ip_id), may be able
to put the target machine into mbuf starvation state.
By setting a upper limit on the number of reassembly queues we
prevent this situation.
This upper limit is controlled by the new sysctl
net.inet.ip.maxfragpackets which defaults to NMBCLUSTERS/4
If you want old behaviour (no upper limit) set this sysctl
to a negative value.
If you don't want to accept any fragments (not recommended)
set the sysctl to 0 (zero)
Obtained from: NetBSD (partially)
MFC after: 1 week
any response to our third SYN to work-around some broken
terminal servers (most of which have hopefully been retired)
that have bad VJ header compression code which trashes TCP
segments containing unknown-to-them TCP options.
PR: kern/1689
Submitted by: jesper
Reviewed by: wollman
MFC after: 2 weeks
For FTP control connection, keep the CRLF end-of-line termination
status in there.
Fixed the bug when the first FTP command in a session was ignored.
PR: 24048
MFC after: 1 week
other "system" header files.
Also help the deprecation of lockmgr.h by making it a sub-include of
sys/lock.h and removing sys/lockmgr.h form kernel .c files.
Sort sys/*.h includes where possible in affected files.
OK'ed by: bde (with reservations)
Change code from PRC_UNREACH_ADMIN_PROHIB to PRC_UNREACH_PORT for
ICMP_UNREACH_PROTOCOL and ICMP_UNREACH_PORT
And let TCP treat PRC_UNREACH_PORT like PRC_UNREACH_ADMIN_PROHIB
This should fix the case where port unreachables for udp returned
ENETRESET instead of ECONNREFUSED
Problem found by: Bill Fenner <fenner@research.att.com>
Reviewed by: jlemon
sysctl, net.inet.ip.fw.permanent_rules.
This allows you to install rules that are persistent across flushes,
which is very useful if you want a default set of rules that
maintains your access to remote machines while you're reconfiguring
the other rules.
Reviewed by: Mark Murray <markm@FreeBSD.org>
very specific scenarios, and now that we have had net.inet.tcp.blackhole for
quite some time there is really no reason to use it any more.
(last of three commits)
using it. Not checking this may have caused the wrong IP address to be
used when processing certain IP options (see example below). This also
caused the wrong route to be passed to ip_output() when forwarding, but
fortunately ip_output() is smart enough to detect this.
This example demonstrates the wrong behavior of the Record Route option
observed with this bug. Host ``freebsd'' is acting as the gateway for
the ``sysv''.
1. On the gateway, we add the route to the destination. The new route
will use the primary address of the loopback interface, 127.0.0.1:
: freebsd# route add 10.0.0.66 -iface lo0 -reject
: add host 10.0.0.66: gateway lo0
2. From the client, we ping the destination. We see the correct replies.
Please note that this also causes the relevant route on the ``freebsd''
gateway to be cached in ipforward_rt variable:
: sysv# ping -snv 10.0.0.66
: PING 10.0.0.66: 56 data bytes
: ICMP Host Unreachable from gateway 192.168.0.115
: ICMP Host Unreachable from gateway 192.168.0.115
: ICMP Host Unreachable from gateway 192.168.0.115
:
: ----10.0.0.66 PING Statistics----
: 3 packets transmitted, 0 packets received, 100% packet loss
3. On the gateway, we delete the route to the destination, thus making
the destination reachable through the `default' route:
: freebsd# route delete 10.0.0.66
: delete host 10.0.0.66
4. From the client, we ping destination again, now with the RR option
turned on. The surprise here is the 127.0.0.1 in the first reply.
This is caused by the bug in ip_rtaddr() not checking the cached
route is still up befor use. The debug code also shows that the
wrong (down) route is further passed to ip_output(). The latter
detects that the route is down, and replaces the bogus route with
the valid one, so we see the correct replies (192.168.0.115) on
further probes:
: sysv# ping -snRv 10.0.0.66
: PING 10.0.0.66: 56 data bytes
: 64 bytes from 10.0.0.66: icmp_seq=0. time=10. ms
: IP options: <record route> 127.0.0.1, 10.0.0.65, 10.0.0.66,
: 192.168.0.65, 192.168.0.115, 192.168.0.120,
: 0.0.0.0(Current), 0.0.0.0, 0.0.0.0
: 64 bytes from 10.0.0.66: icmp_seq=1. time=0. ms
: IP options: <record route> 192.168.0.115, 10.0.0.65, 10.0.0.66,
: 192.168.0.65, 192.168.0.115, 192.168.0.120,
: 0.0.0.0(Current), 0.0.0.0, 0.0.0.0
: 64 bytes from 10.0.0.66: icmp_seq=2. time=0. ms
: IP options: <record route> 192.168.0.115, 10.0.0.65, 10.0.0.66,
: 192.168.0.65, 192.168.0.115, 192.168.0.120,
: 0.0.0.0(Current), 0.0.0.0, 0.0.0.0
:
: ----10.0.0.66 PING Statistics----
: 3 packets transmitted, 3 packets received, 0% packet loss
: round-trip (ms) min/avg/max = 0/3/10
A route generated from an RTF_CLONING route had the RTF_WASCLONED flag
set but did not have a reference to the parent route, as documented in
the rtentry(9) manpage. This prevented such routes from being deleted
when their parent route is deleted.
Now, for example, if you delete an IP address from a network interface,
all ARP entries that were cloned from this interface route are flushed.
This also has an impact on netstat(1) output. Previously, dynamically
created ARP cache entries (RTF_STATIC flag is unset) were displayed as
part of the routing table display (-r). Now, they are only printed if
the -a option is given.
netinet/in.c, netinet/in_rmx.c:
When address is removed from an interface, also delete all routes that
point to this interface and address. Previously, for example, if you
changed the address on an interface, outgoing IP datagrams might still
use the old address. The only solution was to delete and re-add some
routes. (The problem is easily observed with the route(8) command.)
Note, that if the socket was already bound to the local address before
this address is removed, new datagrams generated from this socket will
still be sent from the old address.
PR: kern/20785, kern/21914
Reviewed by: wollman (the idea)
is transmitted as all ones". This got broken after introduction
of delayed checksums as follows. Some guys (including Jonathan)
think that it is allowed to transmit all ones in place of a zero
checksum for TCP the same way as for UDP. (The discussion still
takes place on -net.) Thus, the 0 -> 0xffff checksum fixup was
first moved from udp_output() (see udp_usrreq.c, 1.64 -> 1.65)
to in_cksum_skip() (see sys/i386/i386/in_cksum.c, 1.17 -> 1.18,
INVERT expression). Besides that I disagree that it is valid for
TCP, there was no real problem until in_cksum.c,v 1.20, where the
in_cksum() was made just a special version of in_cksum_skip().
The side effect was that now every incoming IP datagram failed to
pass the checksum test (in_cksum() returned 0xffff when it should
actually return zero). It was fixed next day in revision 1.21,
by removing the INVERT expression. The latter also broke the
0 -> 0xffff fixup for UDP checksums.
Before this change:
: tcpdump: listening on lo0
: 127.0.0.1.33005 > 127.0.0.1.33006: udp 0 (ttl 64, id 1)
: 4500 001c 0001 0000 4011 7cce 7f00 0001
: 7f00 0001 80ed 80ee 0008 0000
After this change:
: tcpdump: listening on lo0
: 127.0.0.1.33005 > 127.0.0.1.33006: udp 0 (ttl 64, id 1)
: 4500 001c 0001 0000 4011 7cce 7f00 0001
: 7f00 0001 80ed 80ee 0008 ffff
come from a dummynet pipe. Without this, the code which increments
the per-ifaddr stats can dereference an uninitialised pointer. This
should make dummynet usable again.
Reported by: "Dmitry A. Yanko" <fm@astral.ntu-kpi.kiev.ua>
Reviewed by: luigi, joe
on certain types of SOCK_RAW sockets. Also, use the ip.ttl MIB
variable instead of MAXTTL constant as the default time-to-live
value for outgoing IP packets all over the place, as we already
do this for TCP and UDP.
Reviewed by: wollman
an IP header with ip_len in network byte order. For certain
values of ip_len, this could cause icmp_error() to write
beyond the end of an mbuf, causing mbuf free-list corruption.
This problem was observed during generation of ICMP redirects.
We now make quite sure that the copy of the IP header kept
for icmp_error() is stored in a non-shared mbuf header so
that it will not be modified by ip_output().
Also:
- Calculate the correct number of bytes that need to be
retained for icmp_error(), instead of assuming that 64
is enough (it's not).
- In icmp_error(), use m_copydata instead of bcopy() to
copy from the supplied mbuf chain, in case the first 8
bytes of IP payload are not stored directly after the IP
header.
- Sanity-check ip_len in icmp_error(), and panic if it is
less than sizeof(struct ip). Incoming packets with bad
ip_len values are discarded in ip_input(), so this should
only be triggered by bugs in the code, not by bad packets.
This patch results from code and suggestions from Ruslan, Bosko,
Jonathan Lemon and Matt Dillon, with important testing by Mike
Tancsa, who could reproduce this problem at will.
Reported by: Mike Tancsa <mike@sentex.net>
Reviewed by: ru, bmilekic, jlemon, dillon
it doesn't block packets whose destination address has been translated to
the loopback net by ipnat.
Add warning comments about the ip_checkinterface feature.
However, if the RTF_DELCLONE and RTF_WASCLONED condition passes, but the ref
count is > 1, we won't decrement the count at all. This could lead to
route entries never being deleted.
Here, we call rtfree() not only if the initial two conditions fail, but
also if the ref count is > 1 (and we therefore don't immediately delete
the route, but let rtfree() handle it).
This is an urgent MFC candidate. Thanks go to Mike Silbersack for the
fix, once again. :-)
Submitted by: Mike Silbersack <silby@silby.com>
addressed to the interface on the other side of the box follow their
historical path.
Explicitly block packets sent to the loopback network sent from the outside,
which is consistent with the behavior of the forwarding path between
interfaces as implemented in in_canforward().
Always check the arrival interface when matching the packet destination
against the interface broadcast addresses. This bug allowed TCP
connections to be made to the broadcast address of an interface on the
far side of the system because the M_BCAST flag was not set because the
packet was unicast to the interface on the near side. This was broken
when the directed broadcast code was removed from revision 1.32. If
the directed broadcast code was stil present, the destination would not
have been recognized as local until the packet was forwarded to the output
interface and ether_output() looped a copy back to ip_input() with
M_BCAST set and the receive interface set to the output interface.
Optimize the order of the tests.
Reviewed by: jlemon
if an arriving packet belongs to us, also check that the packet arrived
through the correct interface. Skip this check if the packet was locally
generated.
When we recieve a fragmented TCP packet (other than the first) we can't
extract header information (we don't have state to reference). In a rather
unelegant fashion we just move on and assume a non-match.
Recent additions to the TCP header-specific section of the code neglected
to add the logic to the fragment code so in those cases the match was
assumed to be positive and those parts of the rule (which should have
resulted in a non-match/continue) were instead skipped (which means
the processing of the rule continued even though it had already not
matched).
Fault can be spread out over Rich Steenbergen (tcpoptions) and myself
(tcp{seq,ack,win}).
rwatson sent me a patch that got me thinking about this whole situation
(but what I'm committing / this description is mine so don't blame him).
For TCP, verify that the sequence number in the ICMP packet falls within
the tcp receive window before performing any actions indicated by the
icmp packet.
Clean up some layering violations (access to tcp internals from in_pcb)
This piece of code has not been referenced since it was put there
in 1995. Also done a codebased search on popular networking libraries
and third-party applications. This is an orphan.
Reviewed by: jesper
connection, but send it immediately. Prior to this change, it was possible
to delay a delayed-ack for multiple times, resulting in degraded TCP
behavior in certain corner cases.
error will be passed up to the user, who will close the connection, so
it does not appear to make a sense to leave the connection open.
This also fixes a bug with kqueue, where the filter does not set EOF
on the connection, because the connection is still open.
Also remove calls to so{rw}wakeup, as we aren't doing anything with
them at the moment anyway.
Reviewed by: alfred, jesper
reset TCP connections which are in the SYN_SENT state, if the sequence
number in the echoed ICMP reply is correct. This behavior can be
controlled by the sysctl net.inet.tcp.icmp_may_rst.
Currently, only subtypes 2,3,10,11,12 are treated as such
(port, protocol and administrative unreachables).
Assocaiate an error code with these resets which is reported to the
user application: ENETRESET.
Disallow resetting TCP sessions which are not in a SYN_SENT state.
Reviewed by: jesper, -net
and 1.84 of src/sys/netinet/udp_usrreq.c
The changes broken down:
- remove 0 as a wildcard for addresses and port numbers in
src/sys/netinet/in_pcb.c:in_pcbnotify()
- add src/sys/netinet/in_pcb.c:in_pcbnotifyall() used to notify
all sessions with the specific remote address.
- change
- src/sys/netinet/udp_usrreq.c:udp_ctlinput()
- src/sys/netinet/tcp_subr.c:tcp_ctlinput()
to use in_pcbnotifyall() to notify multiple sessions, instead of
using in_pcbnotify() with 0 as src address and as port numbers.
- remove check for src port == 0 in
- src/sys/netinet/tcp_subr.c:tcp_ctlinput()
- src/sys/netinet/udp_usrreq.c:udp_ctlinput()
as they are no longer needed.
- move handling of redirects and host dead from in_pcbnotify() to
udp_ctlinput() and tcp_ctlinput(), so they will call
in_pcbnotifyall() to notify all sessions with the specific
remote address.
Approved by: jlemon
Inspired by: NetBSD
credential structure, ucred (cr->cr_prison).
o Allow jail inheritence to be a function of credential inheritence.
o Abstract prison structure reference counting behind pr_hold() and
pr_free(), invoked by the similarly named credential reference
management functions, removing this code from per-ABI fork/exit code.
o Modify various jail() functions to use struct ucred arguments instead
of struct proc arguments.
o Introduce jailed() function to determine if a credential is jailed,
rather than directly checking pointers all over the place.
o Convert PRISON_CHECK() macro to prison_check() function.
o Move jail() function prototypes to jail.h.
o Emulate the P_JAILED flag in fill_kinfo_proc() and no longer set the
flag in the process flags field itself.
o Eliminate that "const" qualifier from suser/p_can/etc to reflect
mutex use.
Notes:
o Some further cleanup of the linux/jail code is still required.
o It's now possible to consider resolving some of the process vs
credential based permission checking confusion in the socket code.
o Mutex protection of struct prison is still not present, and is
required to protect the reference count plus some fields in the
structure.
Reviewed by: freebsd-arch
Obtained from: TrustedBSD Project
treat 0 as a wildcard in src/sys/in_pbc.c:in_pcbnotify()
It's sufficient to check for src|local port, as we'll have no
sessions with src|local port == 0
Without this a attacker sending ICMP messages, where the attached
IP header (+ 8 bytes) has the address and port numbers == 0, would
have the ICMP message applied to all sessions.
PR: kern/25195
Submitted by: originally by jesper, reimplimented by jlemon's advice
Reviewed by: jlemon
Approved by: jlemon
actually in the kernel. This structure is a different size than
what is currently in -CURRENT, but should hopefully be the last time
any application breakage is caused there. As soon as any major
inconveniences are removed, the definition of the in-kernel struct
ucred should be conditionalized upon defined(_KERNEL).
This also changes struct export_args to remove dependency on the
constantly-changing struct ucred, as well as limiting the bounds
of the size fields to the correct size. This means: a) mountd and
friends won't break all the time, b) mountd and friends won't crash
the kernel all the time if they don't know what they're doing wrt
actual struct export_args layout.
Reviewed by: bde
Add new PRC_UNREACH_ADMIN_PROHIB in sys/sys/protosw.h
Remove condition on TCP in src/sys/netinet/ip_icmp.c:icmp_input
In src/sys/netinet/ip_icmp.c:icmp_input set code = PRC_UNREACH_ADMIN_PROHIB
or PRC_UNREACH_HOST for all unreachables except ICMP_UNREACH_NEEDFRAG
Rename sysctl icmp_admin_prohib_like_rst to icmp_unreach_like_rst
to reflect the fact that we also react on ICMP unreachables that
are not administrative prohibited. Also update the comments to
reflect this.
In sys/netinet/tcp_subr.c:tcp_ctlinput add code to treat
PRC_UNREACH_ADMIN_PROHIB and PRC_UNREACH_HOST different.
PR: 23986
Submitted by: Jesper Skriver <jesper@skriver.dk>
address is configured on a interface. This is useful for routers with
dynamic interfaces. It is now possible to say:
0100 allow tcp from any to any established
0200 skipto 1000 tcp from any to any
0300 allow ip from any to any
1000 allow tcp from 1.2.3.4 to me 22
1010 deny tcp from any to me 22
1020 allow tcp from any to any
and not have to worry about the behaviour if dynamic interfaces configure
new IP numbers later on.
The check is semi expensive (traverses the interface address list)
so it should be protected as in the above example if high performance
is a requirement.
were performed to determine if the received packet should be reset. This
created erroneous ratelimiting and false alarms in some cases. The code
has now been reorganized so that the checks for validity come before
the call to badport_bandlim. Additionally, a few changes in the symbolic
names of the bandlim types have been made, as well as a clarification of
exactly which type each RST case falls under.
Submitted by: Mike Silbersack <silby@silby.com>
turned on, and the case of it not being defined at all.
i.e. Disabling bridging re-enables some of the checks it disables.
Submitted by: "Rogier R. Mulhuijzen" <drwilco@drwilco.net>
available, the error return should be EADDRNOTAVAIL rather than
EAGAIN.
PR: 14181
Submitted by: Dima Dorfman <dima@unixfreak.org>
Reviewed by: Garrett Wollman <wollman@khavrinen.lcs.mit.edu>
splimp() -- we need it because dummynet can be invoked by the
bridging code at splimp().
This should cure the pipe "stalls" that several people have been
reporting on -stable while using bridging+dummynet (the problem
would not affect routers using dummynet).
