Commit Graph

1334 Commits

Author SHA1 Message Date
Maksim Yevmenkin
444e5d09b5 avoid holding PCB mutex during copyin/copyout()
Reported by:	imp, mms dot vanbreukelingen at gmail dot com
Reviewed by:	imp
2019-08-30 16:35:31 +00:00
Xin LI
34ff55b662 Convert ng_deflate to use new zlib.
This removes the last consumer of the modified zlib originally
bundled with Paul's PPP implementation, which will be removed
in a follow up commit.

PR:			229763
Differential Revision:	https://reviews.freebsd.org/D21186
2019-08-23 07:24:36 +00:00
Xin LI
443127c517 Use MTX_NEW instead of bzero().
Submitted by:	cem
2019-08-21 08:15:30 +00:00
Xin LI
ee318606ce Fix a panic in ubt_do_hci_request.
The 'mtx' is on stack and can contain garbages that would cause mtx_init
(and in turn lock_init) to think that the mutex was already initialized.
2019-08-21 07:45:39 +00:00
Vladimir Kondratyev
3544d43bb1 ng_ubt(4): do not attach Intel Wireless 8260/8265 in bootloader mode.
Add helper function for synchronous execution of HCI commands at probe
stage and use this function to check firmware state of Intel Wireless
8260/8265 bluetooth devices found in many post 2016 year laptops.

Attempt to initialize FreeBSD bluetooth stack while such a device is in
bootloader mode locks the adapter hardly so it requires power on/off
cycle to restore.

This change blocks ng_ubt attachment unless operational firmware is
loaded thus preventing the lock up.

PR:			237083
Reviewed by:		hps, emax
MFC after:		2 weeks
Differential Revision:	https://reviews.freebsd.org/D21071
2019-08-18 22:11:42 +00:00
Gleb Smirnoff
cef9f220cd Remove 'dir' argument in ng_ipfw_input, since ip_fw_args now has this info.
While here make 'tee' boolean.
2019-03-14 22:30:05 +00:00
Gleb Smirnoff
7d3df83cfa Remove remnants of byte order manipulation, back when FreeBSD stack
stored packets in host byte order.
2019-02-09 03:00:00 +00:00
Gleb Smirnoff
938864b71b Allow some nesting of ng_iface(4) interfaces and add a configuration knob.
PR:		235500
MFC after:	1 week
2019-02-08 06:19:28 +00:00
Maxim Sobolev
b7841ae650 Allow ng_nat to be attached to a ethernet interface directly via ng_ether(4)
or the likes. Add new control message types: setdlt and getdlt to switch
from default DLT_RAW (no encapsulation) to DLT_EN10MB (ethernet).

Approved by:	glebius
MFC after:	1 month
Differential Revision:	https://reviews.freebsd.org/D18535
2018-12-17 16:00:35 +00:00
Eugene Grosbein
f8edc37316 ng_source(4): correction after the change r340617
tv_usec has "long" type for all architecture in FreeBSD
and follows __LP64__. However, this is not true for tv_sec
that has "time_t" type.

Since r320347 that changed time_t from 32 to 64 bit integer
for 32 bit version of powerpc architecture, we have only single
i386 architecture having 32 bit time_t type.

Submitted by:	jhb
MFC after:	1 week.
2018-11-27 04:05:38 +00:00
Eugene Grosbein
d642b94209 Unbreak ng_source(4) for 64-bit platforms including amd64. 2018-11-19 07:27:50 +00:00
Eugene Grosbein
a594f9453b Make ng_pptpgre(8) netgraph node be able to restore order for packets
reordered in transit instead of dropping them altogether.
It uses sequence numbers of PPtPGRE packets.

A set of new sysctl(8) added to control this ability or disable it:

net.graph.pptpgre.reorder_max (1) defines maximum length of node's
private reorder queue used to keep data waiting for late packets.
Zero value disables reordering. Default value 1 allows the node to restore
the order for two packets swapped in transit. Greater values allow the node
to deliver packets being late after more packets in sequence
at cost of increased kernel memory usage.

net.graph.pptpgre.reorder_timeout (1) defines time value in miliseconds
used to wait for late packets. It may be useful to increase this
if reordering spot is distant.

MFC after:	1 month
2018-11-04 19:10:44 +00:00
Mark Murray
19fa89e938 Remove the Yarrow PRNG algorithm option in accordance with due notice
given in random(4).

This includes updating of the relevant man pages, and no-longer-used
harvesting parameters.

Ensure that the pseudo-unit-test still does something useful, now also
with the "other" algorithm instead of Yarrow.

PR:		230870
Reviewed by:	cem
Approved by:	so(delphij,gtetlow)
Approved by:	re(marius)
Differential Revision:	https://reviews.freebsd.org/D16898
2018-08-26 12:51:46 +00:00
Alexander Motin
8805f3d7be Remove extra M_ZERO from NG_MKRESPONSE() argument.
NG_MKRESPONSE() sets M_ZERO by itself.

Submitted by:	Dmitry Luhtionov <dmitryluhtionov@gmail.com>
MFC after:	1 week
2018-08-20 14:35:54 +00:00
Luiz Otavio O Souza
02fd7b50a0 The interface name must be sanitized before the search to match the existing
netgraph node.

Fixes the search (and use) of VLANs with dot notation.

Obtained from:	pfSense
Sponsored by:	Rubicon Communications, LLC (Netgate)
2018-08-15 13:42:22 +00:00
Gleb Smirnoff
86b4ad7dd5 Use if_tunnel_check_nesting() for ng_iface(4). 2018-08-03 22:55:58 +00:00
Andrew Turner
5f901c92a8 Use the new VNET_DEFINE_STATIC macro when we are defining static VNET
variables.

Reviewed by:	bz
Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D16147
2018-07-24 16:35:52 +00:00
John Baldwin
4560b78de2 Catch up two more places to the V_ifnet change to a CK_STAILQ. 2018-05-24 00:06:55 +00:00
Matt Macy
d7c5a620e2 ifnet: Replace if_addr_lock rwlock with epoch + mutex
Run on LLNW canaries and tested by pho@

gallatin:
Using a 14-core, 28-HTT single socket E5-2697 v3 with a 40GbE MLX5
based ConnectX 4-LX NIC, I see an almost 12% improvement in received
packet rate, and a larger improvement in bytes delivered all the way
to userspace.

When the host receiving 64 streams of netperf -H $DUT -t UDP_STREAM -- -m 1,
I see, using nstat -I mce0 1 before the patch:

InMpps OMpps  InGbs  OGbs err TCP Est %CPU syscalls csw     irq GBfree
4.98   0.00   4.42   0.00 4235592     33   83.80 4720653 2149771   1235 247.32
4.73   0.00   4.20   0.00 4025260     33   82.99 4724900 2139833   1204 247.32
4.72   0.00   4.20   0.00 4035252     33   82.14 4719162 2132023   1264 247.32
4.71   0.00   4.21   0.00 4073206     33   83.68 4744973 2123317   1347 247.32
4.72   0.00   4.21   0.00 4061118     33   80.82 4713615 2188091   1490 247.32
4.72   0.00   4.21   0.00 4051675     33   85.29 4727399 2109011   1205 247.32
4.73   0.00   4.21   0.00 4039056     33   84.65 4724735 2102603   1053 247.32

After the patch

InMpps OMpps  InGbs  OGbs err TCP Est %CPU syscalls csw     irq GBfree
5.43   0.00   4.20   0.00 3313143     33   84.96 5434214 1900162   2656 245.51
5.43   0.00   4.20   0.00 3308527     33   85.24 5439695 1809382   2521 245.51
5.42   0.00   4.19   0.00 3316778     33   87.54 5416028 1805835   2256 245.51
5.42   0.00   4.19   0.00 3317673     33   90.44 5426044 1763056   2332 245.51
5.42   0.00   4.19   0.00 3314839     33   88.11 5435732 1792218   2499 245.52
5.44   0.00   4.19   0.00 3293228     33   91.84 5426301 1668597   2121 245.52

Similarly, netperf reports 230Mb/s before the patch, and 270Mb/s after the patch

Reviewed by:	gallatin
Sponsored by:	Limelight Networks
Differential Revision:	https://reviews.freebsd.org/D15366
2018-05-18 20:13:34 +00:00
Ed Maste
315fbaeca2 Correct pseudo misspelling in sys/ comments
contrib code and #define in intel_ata.h unchanged.
2018-02-23 18:15:50 +00:00
Eugene Grosbein
8be8c75688 ng_pppoe(8): add support for user-supplied Host-Uniq tag.
A few ISP filter PADI requests based on such tag,
to force the use of their own routers.
The custom Host-Uniq tag is passed in the NGM_PPPOE_CONNECT
control message, so it can be used with FreeBSD ppp(8)
and mpd without any other change.

Add support to send and receive PADM messages,
HURL and MOTM, often used by service providers to provide
ACS information and other configuration settings
to the user CPE.

Submitted by:	ale
Approved by:	mav (mentor)
MFC after:	1 month
Differential Revision:	https://reviews.freebsd.org/D9270
2018-02-14 21:17:44 +00:00
Pedro F. Giffuni
ac2fffa4b7 Revert r327828, r327949, r327953, r328016-r328026, r328041:
Uses of mallocarray(9).

The use of mallocarray(9) has rocketed the required swap to build FreeBSD.
This is likely caused by the allocation size attributes which put extra pressure
on the compiler.

Given that most of these checks are superfluous we have to choose better
where to use mallocarray(9). We still have more uses of mallocarray(9) but
hopefully this is enough to bring swap usage to a reasonable level.

Reported by:	wosch
PR:		225197
2018-01-21 15:42:36 +00:00
Pedro F. Giffuni
3b0a4e40a0 netgraph: make some use of mallocarray(9).
Focus on code where we are doing multiplications within malloc(9). None of
these ire likely to overflow, however the change is still useful as some
static checkers can benefit from the allocation attributes we use for
mallocarray.

This initial sweep only covers malloc(9) calls with M_NOWAIT. No good
reason but I started doing the changes before r327796 and at that time it
was convenient to make sure the sorrounding code could handle NULL values.

X-Differential revision: https://reviews.freebsd.org/D13837
2018-01-15 21:19:21 +00:00
Pedro F. Giffuni
fe267a5590 sys: general adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

No functional change intended.
2017-11-27 15:23:17 +00:00
Eugene Grosbein
ab070eb18b Correction after r323873: #include <sys/lock.h> in addition to <sys/rmlock.h>
PR:		220076
Approved by:	mav (mentor)
MFC after:	3 days
2017-09-28 11:26:37 +00:00
Eugene Grosbein
10633c7e5a Unprotected modification of ng_iface(4) private data leads to kernel panic.
Fix a race with per-node read-mostly lock and refcounting for a hook.

PR:			220076
Tested by:		peixoto.cassiano
Approved by:		avg (mentor), mav (mentor)
MFC after:		1 week
Relnotes:		yes
Differential Revision:	https://reviews.freebsd.org/D12435
2017-09-21 20:16:10 +00:00
Gleb Smirnoff
7737de9515 Check return value from soaccept().
Coverity:	1376209
2017-06-14 16:13:20 +00:00
Gleb Smirnoff
779f106aa1 Listening sockets improvements.
o Separate fields of struct socket that belong to listening from
  fields that belong to normal dataflow, and unionize them.  This
  shrinks the structure a bit.
  - Take out selinfo's from the socket buffers into the socket. The
    first reason is to support braindamaged scenario when a socket is
    added to kevent(2) and then listen(2) is cast on it. The second
    reason is that there is future plan to make socket buffers pluggable,
    so that for a dataflow socket a socket buffer can be changed, and
    in this case we also want to keep same selinfos through the lifetime
    of a socket.
  - Remove struct struct so_accf. Since now listening stuff no longer
    affects struct socket size, just move its fields into listening part
    of the union.
  - Provide sol_upcall field and enforce that so_upcall_set() may be called
    only on a dataflow socket, which has buffers, and for listening sockets
    provide solisten_upcall_set().

o Remove ACCEPT_LOCK() global.
  - Add a mutex to socket, to be used instead of socket buffer lock to lock
    fields of struct socket that don't belong to a socket buffer.
  - Allow to acquire two socket locks, but the first one must belong to a
    listening socket.
  - Make soref()/sorele() to use atomic(9).  This allows in some situations
    to do soref() without owning socket lock.  There is place for improvement
    here, it is possible to make sorele() also to lock optionally.
  - Most protocols aren't touched by this change, except UNIX local sockets.
    See below for more information.

o Reduce copy-and-paste in kernel modules that accept connections from
  listening sockets: provide function solisten_dequeue(), and use it in
  the following modules: ctl(4), iscsi(4), ng_btsocket(4), ng_ksocket(4),
  infiniband, rpc.

o UNIX local sockets.
  - Removal of ACCEPT_LOCK() global uncovered several races in the UNIX
    local sockets.  Most races exist around spawning a new socket, when we
    are connecting to a local listening socket.  To cover them, we need to
    hold locks on both PCBs when spawning a third one.  This means holding
    them across sonewconn().  This creates a LOR between pcb locks and
    unp_list_lock.
  - To fix the new LOR, abandon the global unp_list_lock in favor of global
    unp_link_lock.  Indeed, separating these two locks didn't provide us any
    extra parralelism in the UNIX sockets.
  - Now call into uipc_attach() may happen with unp_link_lock hold if, we
    are accepting, or without unp_link_lock in case if we are just creating
    a socket.
  - Another problem in UNIX sockets is that uipc_close() basicly did nothing
    for a listening socket.  The vnode remained opened for connections.  This
    is fixed by removing vnode in uipc_close().  Maybe the right way would be
    to do it for all sockets (not only listening), simply move the vnode
    teardown from uipc_detach() to uipc_close()?

Sponsored by:		Netflix
Differential Revision:	https://reviews.freebsd.org/D9770
2017-06-08 21:30:34 +00:00
Takanori Watanabe
4aa92fe2f3 Make cached Bluetooth LE host advertise information visible from userland.
Differential Revision:	https://reviews.freebsd.org/D10362
2017-04-27 15:03:24 +00:00
Brooks Davis
a7dc31283a Remove the NATM framework including the en(4), fatm(4), hatm(4), and
patm(4) devices.

Maintaining an address family and framework has real costs when we make
infrastructure improvements.  In the case of NATM we support no devices
manufactured in the last 20 years and some will not even work in modern
motherboards (some newer devices that patm(4) could be updated to
support apparently exist, but we do not currently have support).

With this change, support remains for some netgraph modules that don't
require NATM support code. It is unclear if all these should remain,
though ng_atmllc certainly stands alone.

Note well: FreeBSD 11 supports NATM and will continue to do so until at
least September 30, 2021.  Improvements to the code in FreeBSD 11 are
certainly welcome.

Reviewed by:	philip
Approved by:	harti
2017-04-24 21:21:49 +00:00
Pedro F. Giffuni
ec5753e0eb mppc - Finish pluging NETGRAPH_MPPC_COMPRESSION.
There were several places where reference to compression were left
unfinished. Furthermore, KASSERTs contained references to MPPC_INVALID
which is not defined in the tree and therefore were sure to break with
INVARIANTS: comment them out.

Reported by:	Eugene Grosbein
PR:		216265
MFC after:	3 days
2017-01-20 00:02:11 +00:00
Julian Elischer
426b3d047a Changes to allow the patching of packets with an offset (and other changes.. see man page)
PR:	206185
Submitted by:	Dmitry Vagin <daemon-hammer@ya.ru>
MFC after:	 1 week
Relnotes:	yes (also ng_checksum node)
2016-12-02 10:47:10 +00:00
Hans Petter Selasky
0e493ed3a5 Fix return value from ng_uncallout().
callout_stop() recently started returning -1 when the callout is already
stopped, which is not handled by the netgraph code. Properly filter
the return value. Netgraph callers only want to know if the callout
was cancelled and not draining or already stopped.

Discussed with:		julian, glebius
MFC after:		2 weeks
2016-12-02 09:29:22 +00:00
Bjoern A. Zeeb
310dc5a403 Writing out the L2TP control packet requires 12 bytes of
contiguous memory but in one path we did not always guarantee this,
thus do a m_pullup() there.

PR:			214385
Submitted by:		Joe Jones (joeknockando googlemail.com)
MFC after:		3 days
2016-11-17 14:03:44 +00:00
Bryan Drewery
28323add09 Fix improper use of "its".
Sponsored by:	Dell EMC Isilon
2016-11-08 23:59:41 +00:00
Sean Bruno
2f632dbb0b Avoid panic from ng_uncallout when unpluggin ethernet cable with active
PPTP VPN connection.

Submitted by:	Michael Zhilin <mizhka@gmail.com>
Reviewed by:	ngie
MFC after:	3 days
Differential Revision:	https://reviews.freebsd.org/D7209
2016-08-08 19:31:01 +00:00
Julian Elischer
d7373c820e netgraph module for reconstructing checksums
PR:		206108
Submitted by:	Dmitry Vagin  daemon.hammer@ya.ru
MFC after:	1 month
2016-08-01 12:09:04 +00:00
Julian Elischer
bf909fc9a4 slite style changes. There is an incoming patch that rewrites a
lot of this module and I want to get the style and whitespace changes in
a separate commit (or maybe more).

PR: 206185
Submitted by:	Dmitry Vagin
MFC after:	1 month
2016-08-01 11:34:12 +00:00
Bjoern A. Zeeb
89856f7e2d Get closer to a VIMAGE network stack teardown from top to bottom rather
than removing the network interfaces first. This change is rather larger
and convoluted as the ordering requirements cannot be separated.

Move the pfil(9) framework to SI_SUB_PROTO_PFIL, move Firewalls and
related modules to their own SI_SUB_PROTO_FIREWALL.
Move initialization of "physical" interfaces to SI_SUB_DRIVERS,
move virtual (cloned) interfaces to SI_SUB_PSEUDO.
Move Multicast to SI_SUB_PROTO_MC.

Re-work parts of multicast initialisation and teardown, not taking the
huge amount of memory into account if used as a module yet.

For interface teardown we try to do as many of them as we can on
SI_SUB_INIT_IF, but for some this makes no sense, e.g., when tunnelling
over a higher layer protocol such as IP. In that case the interface
has to go along (or before) the higher layer protocol is shutdown.

Kernel hhooks need to go last on teardown as they may be used at various
higher layers and we cannot remove them before we cleaned up the higher
layers.

For interface teardown there are multiple paths:
(a) a cloned interface is destroyed (inside a VIMAGE or in the base system),
(b) any interface is moved from a virtual network stack to a different
network stack ("vmove"), or (c) a virtual network stack is being shut down.
All code paths go through if_detach_internal() where we, depending on the
vmove flag or the vnet state, make a decision on how much to shut down;
in case we are destroying a VNET the individual protocol layers will
cleanup their own parts thus we cannot do so again for each interface as
we end up with, e.g., double-frees, destroying locks twice or acquiring
already destroyed locks.
When calling into protocol cleanups we equally have to tell them
whether they need to detach upper layer protocols ("ulp") or not
(e.g., in6_ifdetach()).

Provide or enahnce helper functions to do proper cleanup at a protocol
rather than at an interface level.

Approved by:		re (hrs)
Obtained from:		projects/vnet
Reviewed by:		gnn, jhb
Sponsored by:		The FreeBSD Foundation
MFC after:		2 weeks
Differential Revision:	https://reviews.freebsd.org/D6747
2016-06-21 13:48:49 +00:00
Takanori Watanabe
b32073c458 Disconnect LE socket when the HCI connection associated is disconnected. 2016-06-07 16:57:13 +00:00
Jung-uk Kim
ccabe8433f Fix style(9). 2016-05-26 19:17:51 +00:00
Jung-uk Kim
a42aa5facd Use bit_count(3) instead of four bitcount32() calls.
Reviewed by:	asomers, ngie
Differential Revision:	https://reviews.freebsd.org/D6543
2016-05-26 18:57:26 +00:00
Pedro F. Giffuni
053359b7f4 sys/netgraph: spelling fixes in comments.
No functional change.
2016-04-29 21:25:05 +00:00
Pedro F. Giffuni
55e0987aea sys: extend use of the howmany() macro when available.
We have a howmany() macro in the <sys/param.h> header that is
convenient to re-use as it makes things easier to read.
2016-04-26 15:38:17 +00:00
Pedro F. Giffuni
323b076e9c sys: use our nitems() macro when param.h is available.
This should cover all the remaining cases in the kernel.

Discussed in:	freebsd-current
2016-04-21 19:40:10 +00:00
Pedro F. Giffuni
8dfea46460 Remove slightly used const values that can be replaced with nitems().
Suggested by:	jhb
2016-04-21 15:38:28 +00:00
Pedro F. Giffuni
155d72c498 sys/net* : for pointers replace 0 with NULL.
Mostly cosmetical, no functional change.

Found with devel/coccinelle.
2016-04-15 17:30:33 +00:00
Pedro F. Giffuni
74b8d63dcc Cleanup unnecessary semicolons from the kernel.
Found with devel/coccinelle.
2016-04-10 23:07:00 +00:00
Justin Hibbits
c47476d7e6 Migrate many bus_alloc_resource() calls to bus_alloc_resource_anywhere().
Most calls to bus_alloc_resource() use "anywhere" as the range, with a given
count.  Migrate these to use the new bus_alloc_resource_anywhere() API.

Reviewed by:	jhb
Differential Revision:	https://reviews.freebsd.org/D5370
2016-02-27 03:38:01 +00:00
Gleb Smirnoff
8ec07310fa These files were getting sys/malloc.h and vm/uma.h with header pollution
via sys/mbuf.h
2016-02-01 17:41:21 +00:00