- Annotate FreeBSD sysctls with CTLFLAG_MPSAFE
- Reduce stack usage of Lua
- Don't save user FPU context in kernel threads
- Add support for procfs_list
- Code cleanup in zio_crypt
- Add DB_RF_NOPREFETCH to dbuf_read()s in dnode.c
- Drop references when skipping dmu_send due to EXDEV
- Eliminate gratuitous bzeroing in dbuf_stats_hash_table_data
- Fix legacy compat for platform IOCs
The assembly implementation incorrectly used logical AND instead of
bitwise AND. Fix, and re-enable in libmd.
Submitted by: Yang Zhong <yzhong@freebsdfoundation.org>
Reviewed by: cem (earlier)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26614
Per the Intel manuals, CPUID is supposed to unconditionally zero the
upper 32 bits of the involved (rax/rbx/rcx/rdx) registers.
Previously, the emulation would cast pointers to the 64-bit register
values down to `uint32_t`, which while properly manipulating the lower
bits, would leave any garbage in the upper bits uncleared. While no
existing guest OSes seem to stumble over this in practice, the bhyve
emulation should match x86 expectations.
This was discovered through alignment warnings emitted by gcc9, while
testing it against SmartOS/bhyve.
SmartOS bug: https://smartos.org/bugview/OS-8168
Submitted by: Patrick Mooney
Reviewed by: rgrimes
Differential Revision: https://reviews.freebsd.org/D24727
Repeating the default WARNS here makes it slightly more difficult to
experiment with default WARNS changes, e.g. if we did something absolutely
bananas and introduced a WARNS=7 and wanted to try lifting the default to
that.
Drop most of them; there is one in the blake2 kernel module, but I suspect
it should be dropped -- the default WARNS in the rest of the build doesn't
currently apply to kernel modules, and I haven't put too much thought into
whether it makes sense to make it so.
successful RPC.
Without this patch, the NFSv4.2 VOP_COPY_FILE_RANGE() client call would
loop until the copy "len" was completed. The problem with doing this is
that it might take a considerable time to complete for a large "len".
By returning after a single successful Copy RPC that copied some of the
data, the application that did the copy_file_range(2) syscall will be
more responsive to signal delivery for large "len" copies.
hole size boundary.
By clipping the len argument of vn_generic_copy_file_range() to end at
an exact multiple of hole size, holes are more likely to be maintained
during the copy.
A hole can still straddle the boundary at the end of the
copy range, resulting in a block being allocated in the
output file as it is being grown in size, but this will reduce the
likelyhood of this happening.
While here, also modify setting of blksize to better handle the
case where _PC_MIN_HOLE_SIZE is returned as 1.
Reviewed by: asomers
Differential Revision: https://reviews.freebsd.org/D26570
A user pointer is not a suitable value for bio_data and the next block
of code always overwrites bio_data anyway. Just use cb->aio_buf
directly in the call to vm_fault_quick_hold_pages().
Reviewed by: kib
Obtained from: CheriBSD
MFC after: 1 month
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D26595
Some DSDT entries have multiple interrupts for one device.
Add support for it.
This fixes ahci on NXP LS2160 and genet on RPi4
Submitted by: Greg V <greg@unrelenting.technology>
Reviewed by: jhb
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25145
In r351368, we introduced this XML- and GDB-encoded data. The protocol
'offset' should reflex the logical XML data offset, but unfortunately we
counted the GDB escapes as well.
In fact, we cannot safely do GDB character escaping at this layer at
all, because we don't know what will be flushed in a packet. It is
bogus to send only the first character of a two-character escape
sequence.
This patch "corrects" the problem by squashing these characters in the
transmitted XML document. It would be nice to transmit the characters
faithfully, but that is a more complicated change. Thread names are a
nice convenience feature for the GDB client, but one can always inspect
td_name or p_comm directly to find the true name.
Reported by: Ka Ho Ng <khng300 AT gmail.com>
Tested by: Ka Ho Ng
Reviewed by: emaste, markj, rlibby
Differential Revision: https://reviews.freebsd.org/D26599
Load/store/fetch access exceptions always indicate a violation of a PMP
rule. We can't treat those as page faults, because updating the page
table and trying again will only result in exactly the same access
exception recurring. This leaves us in an endless exception loop.
We cannot recover from these exceptions, so panic instead.
Reviewed by: jhb
Sponsored by: Axiado
Differential Revision: https://reviews.freebsd.org/D26544
Every other architecture defines this and this is required for
interrupts to work when using QEMU's PCI VirtIO devices (which all
report an interrupt line of 0) for two reasons.
Firstly, interrupt line 0 is wrong; they use one of 0x20-0x23 with the
lines being cycled across devices like normal. Moreover, RISC-V uses
INTRNG, whose IRQs are virtual as indices into its irq_map, so even if
we have the right interrupt line we still need to try and route the
interrupt in order to ultimately call into intr_map_irq and get back a
unique index into the map for the given line, otherwise we will use
whatever happens to be in irq_map[line] (which for QEMU where the line
is initialised to 0 results in using the first allocated interrupt,
namely the RTC on IRQ 11 at time of commit).
Note that pci_assign_interrupt will still do the wrong thing for INTRNG
when using a tunable, as it will bypass INTRNG entirely and use the
tunable's value as the index into irq_map, when it should instead
(indirectly) call intr_map_irq to allocate a new entry for the given
IRQ and treat the tunable as stating the physical line in use, which is
what one would expect. This, however, is a problem shared by all INTRNG
architectures, and not exclusive to RISC-V.
Reviewed by: kib
Approved by: kib
Differential Revision: https://reviews.freebsd.org/D26564
Without this patch, if a call to copy_file_range(2) specifies an input file
offset + len that would wrap around, EINVAL is returned.
I thought that was the Linux behaviour, but recent testing showed that
Linux accepts this case and does the copy_file_range() to EOF.
This patch changes the FreeBSD code to exhibit the same behaviour as
Linux for this case.
Reviewed by: asomers, kib
Differential Revision: https://reviews.freebsd.org/D26569
This appears to be a typo. The AdvSIMD field encodes support for
half-precision floating point SIMD instructions, which corresponds to
HWCAP_ASIMDHP, not HWCAP_ASIMDDP.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
ccr(4) uses software to handle GCM and CCM requests not supported by
the crypto engine (e.g. with only AAD and no payload). This change
adds a fallback for a few more requests such as those with more SGL
entries than can fit in a work request (this can happen for GCM when
decrypting a TLS record split across 15 or more packets).
Reported by: Chelsio QA
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D26582
Rather than placing the epoch around the entire receive loop which
might call into rtwn_rx_frame() and USB and sleep, split the loop
into two[1] and leave us with one unlock/lock cycle as well.
PR: 249925
Reported by: thj, (rkoberman gmail.com)
Tested by: thj
Suggested by: adrian [1]
Reviewed by: adrian
MFC after: 3 days
Sponsored by: The FreeBSD Foundation (initially, paniced my iwl lab host)
Differential Revision: https://reviews.freebsd.org/D26554
This is mostly needed for a common arm64/amd64 iommu code.
Reviewed by: kib
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D26587
This function isn't ACPI dependent and we may use it on FDT systems
as well.
o Don't repeat the function declaration, include iommu.h instead.
Reviewed by: andrew, kib
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D26584
This was introduced when I merged r361287 to OpenZFS and has been fixed
there already, commit 3f6bb6e43fd68e.
Reported by: swills
Reviewed by: allanjude, freqlabs, mmacy
LLVM 11 changed the meaning of '-O' from '-O2' to '-O1', which resulted
in debug kernels (with 'makeoptions DEBUG=-g') being built with inlining
disabled, causing severe performance hit.
The -O2 was already being used for building amd64, powerpc, and powerpcspe.
Discussed with: jrtc27, arichardson, bdragon, jhibbits
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D26471
This avoids setting the association in an inconsistent
state, which could result in a use-after-free situation.
This can be triggered by a malicious peer, if the peer
can modify the cookie without the local endpoint recognizing
it.
Thanks to Ned Williamson for reporting the issue.
MFC after: 3 days
Bind the netmap tx queues to a special '0xff' scheduling class which
makes the firmware skip some processing related to rate limiting on the
outgoing traffic. Future firmwares will do this automatically.
MFC after: 1 week
Sponsored by: Chelsio Communications
- Only active netmap receive queues should be in the RSS lookup table.
- The RSS table should be restored for NIC operation when the last
active netmap queue is switched off, not the first one.
- Support repeated netmap ON/OFF on a subset of the queues. This works
whether the the queues being enabled and disabled are the only ones
active or not. Some kring indexes have to be reset in the driver for
the second case.
MFC after: 1 week
Sponsored by: Chelsio Communications
For interfaces that do not support SIOCGIFMEDIA (for which there are
quite a few) the only fallback is to query the interface for
if_data->ifi_link_state. While it's possible to get at if_data for an
interface via getifaddrs(3) or sysctl, both are heavy weight mechanisms.
SIOCGIFDATA is a simple ioctl to retrieve this fast with very little
resource use in comparison. This implementation mirrors that of other
similar ioctls in FreeBSD.
Submitted by: Roy Marples <roy@marples.name>
Reviewed by: markj
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D26538
Until we can do proper /etc/rc output on both consoles in multicons
boot (or all of them if we ever generalize), report when we are
booting multicons. Also report the primary console. This will be a big
hint why output stops after this line (though some slow USB discovery
still happens after mountroot / init starts).
Reviewed by: scottl@, tsoome@
Differential Revision: https://reviews.freebsd.org/D26574
Use address of the pointer passed to kernel to determine whether the pointer
is a FDT block (physical address) or a module pointer (virtual kernel address).
This fragment was supposed to be committed before r366196, but I accidentally
skipped it in a patch series.
Reported by: bz
from 32 to 28) by shrinking some entries and reordering them.
Reviewed by: kib
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D26508
