Networking is broken if the driver configures its (virtual) hardware to
use a hash algorithm (or a key) different from the one that the network
stack (software RSS) uses. This can be seen with connections initiated
from the host. The PCB will be placed into the hash table based on the
hash value calculated by the software. The hardware-calculated hash
value in reponse packets will be different, so the PCB won't be found.
Tested with a kernel compiled with 'options RSS' on an instance with ena
driver.
Reviewed by: mw, adrian
MFC after: 2 weeks
Sponsored by: Panzura
Differential Revision: https://reviews.freebsd.org/D24733
When the PCI address != physical address we need to translate from the
former to the latter before passing to the parent to map into the kernels
virtual address space.
Sponsored by: Innovate UK
It's interesting that similar messages from gpiobus_acquire_pin never
had any prefix while gpiobus_release_pin messages were prefixed with
"gpiobus_acquire_pin".
Anyway, the prefix is not that useful and can be deduced from context.
MFC after: 2 weeks
fibX_lookup_nh_ext().
fibX_lookup_nh_ represents pre-epoch generation of fib kpi,
providing less guarantees over pointer validness and requiring
on-stack data copying.
Reviewed by: np
Differential Revision: https://reviews.freebsd.org/D24975
It turns out relocating the symbol table itself can cause issues, like fbt
crashing because it applies the offsets to the kernel twice.
This had been previously brought up in rS333447 when the stoffs hack was
added, but I had been unaware of this and reimplemented symtab relocation.
Instead of relocating the symbol table, keep track of the relocation base
in ddb, so the ddb symbols behave like the kernel linker-provided symbols.
This is intended to be NFC on platforms other than PowerPC, which do not
use fully relocatable kernels. (The relbase will always be 0)
* Remove the rest of the stoffs hack.
* Remove my half-baked displace_symbol_table() function.
* Extend ddb initialization to cope with having a relocation offset on the
kernel symbol table.
* Fix my kernel-as-initrd hack to work with booke64 by using a temporary
mapping to access the data.
* Fix another instance of __powerpc__ that is actually RELOCATABLE_KERNEL.
* Change the behavior or X_db_symbol_values to apply the relocation base
when updating valp, to match link_elf_symbol_values() behavior.
Reviewed by: jhibbits
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D25223
Once tx mbufs have been handed to hardware, nothing serializes the tx
path against completion and potential use-after-free of the outbound
mbuf. Perform accounting and BPF tap before queueing to hardware to
avoid this race.
Submitted by: Steve Wirtz <steve_wirtz AT dell.com>
Reviewed by: markj, rstone
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D25364
For the sake of the record, this is the last use of the words master and slave
in the FreeBSD's USB stack, drivers and subsystems.
MFC after: 1 week
Sponsored by: Mellanox Technologies
- refactorize packet receive path. Make sure that we don't leak mbufs
and/or that we don't create holes in RX descriptor ring
- slightly simplify handling with TX descriptors
MFC after: 4 weeks
By using DWC TRM terminology, normal descriptor format should be named
extended and alternate descriptor format should be named normal.
Should not been functional change.
MFC after: 4 weeks
Use naming nomenclature used in DesignWare TRM.
This driver was written by using Altera (now Intel) documentation for Arria
FPGA manual. Unfortunately this manual used very different (and in some cases
opposite naming) for registers and descriptor fields. Unfortunately,
this makes future expansion extremely hard.
Should not been functional change.
MFC after: 4 weeks
When the PCI and CPU physical addresses are identical it doesn't matter
which is used to create the resources, however on some systems, e.g.
qemu armv7 virt, they are different. This leads to a panic as we try to
map the wrong physical address into the kernel address space.
Reported by: Jenkins via trasz
Sponsored by: Innovate UK
- temporarily disable handling with phy, we don't have driver for it yet
- always clear cause for administartive interrupt.
While I'm in, fix style(9) (mainly whitespace).
MFC after: 4 weeks
- only normal memory window is mandatory, prefetchable memory and
I/O windows should be optional
- full PCIe configuration space is supported
- remove duplicated check from function for accessing configuration space.
It is already contained in pci_dw_check_dev()
MFC after: 2 weeks
This chip is used in the Rasperry Pi 4, and is supported by the if_genet
driver. Currently we use the ukphy mii driver, this patch switches over
to the brgphy mii driver instead. To support the rgmii-rxid phy mode,
which is now the default in the Linux dtb, we add support for clock
skewing.
These changes are taken from OpenBSD and NetBSD, except for the bailout
in brgphy_bcm54xx_clock_delay() in rgmii mode, which was found necessary
after testing.
Submitted by: Robert Crowston, crowston at protomail.com
Differential Revision: https://reviews.freebsd.org/D25251
Instead of panic after one second of polling, make the normal timeout
handler to activate, reset the controller and abort the outstanding
requests. If all of it won't happen within 10 seconds then something
in the driver is likely stuck bad and panic is the only way out.
In particular this fixed device hot unplug during execution of those
polled commands, allowing clean device detach instead of panic.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
It is plausible that the hardware interrupts a host only when GIS goes
from zero to one. GIS is formed by OR-ing multiple hardware statuses,
so it's possible that a previously cleared status gets set again while
another status has not been cleared yet. Thus, there will be no new
interrupt as GIS always stayed set. If we don't re-examine GIS then we
can leave it set and never get another interrupt again.
Without this change I frequently saw a problem where snd_hda would stop
working. Setting dev.hdac.1.polling=1 would bring it back to life and
afterwards I could set polling back to zero. Sometimes the problem
started right after a boot, sometimes it happened after resuming from
S3, frequently it would occur when sound output and input are active
concurrently (such as during conferencing). I looked at HDAC_INTSTS
while the sound was not working and I saw that both HDAC_INTSTS_GIS and
HDAC_INTSTS_CIS were set, but there were no interrupts.
I have collected some statistics over a period of several days about how
many loops (calls to hdac_one_intr) the new code did for a single
interrupt:
+--------+--------------+
|Loops |Times Happened|
+--------+--------------+
|0 |301 |
|1 |12857746 |
|2 |280 |
|3 |2 |
|4+ |0 |
+--------+--------------+
I believe that previously the sound would get stuck each time we had to loop
more than once.
The tested hardware is:
hdac1: <AMD (0x15e3) HDA Controller> mem 0xfe680000-0xfe687fff at device 0.6 on pci4
hdacc1: <Realtek ALC269 HDA CODEC> at cad 0 on hdac1
No objections: mav
MFC after: 5 weeks
Differential Revision: https://reviews.freebsd.org/D25128
- Support Prefetchable Memory.
- Use the correct rman when allocating memory and ioports.
- Translate PCI addresses in bus_alloc_resource to allow physical
addresses that are different than pci addresses.
Reviewed by: Robert Crowston <crowston_protonmail.com>
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D25121
Changes in the mbuf layout regarding HW TLS, resulted in wrong detection
of starting mbuf. Use a boolean variable to handle this and pass m_adj()
the top mbuf, so that the packet header is adjusted correctly.
MFC after: 1 week
Sponsored by: Mellanox Technologies
Make sure we disable the multicast filter in promiscious mode aswell as when
the all multicast flag is set.
MFC after: 1 week
Found by: Tycho Nightingale <tychon@freebsd.org>
Sponsored by: Mellanox Technologies
Since the two functions are similar, introduce a common function
(vtnet_rx_vq_process()) to share common code.
This also improves locking, by ensuring vrxs_rescheduled is accessed
under the RXQ lock, and taskqueue_enqueue() is not called under the
lock (therefore avoiding a spurious duplicate lock warning).
Reported by: jrtc27
MFC after: 2 weeks
Remove TSO from the toggle mask when automatically disabled by TXCKSUM* in
various NIC drivers.
Reviewed by: hselasky, np, gallatin, jpaetzel
Approved by: mav (mentor)
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D25120
For legacy devices that don't support MrgRxBuf (such as bhyve pre-r358180),
r361944 failed to update the receive handler to account for the additional
padding introduced by the unused num_buffers field that is now always present
in struct vtnet_rx_header. Thus, calculate the padding dynamically based on
vtnet_hdr_size.
PR: 247242
Reported by: thj
Tested by: thj
The nm_register callback needs to call nm_set_native_flags()
or nm_clear_native_flags() once the device has been stopped.
However, in the current implementation this is not true,
as the device is stopped by vtnet_init_locked(). This causes
race conditions where the driver crashes as soon as it
dequeues netmap buffers assuming they are mbufs (or the other
way around).
To fix the issue, we extend vtnet_init_locked() with a second
argument that, if not zero, will set/clear the netmap flags.
This results in a huge simplification of the nm_register
callback itself.
Also, use netmap_reset() to check if a ring is going to be
re-initialized in netmap mode.
MFC after: 1 week
Parts of the z8530 driver were still using the SUN channel spacing.
This was invalid on PowerMac and QEMU, where the attachment was to escc,
not escc-legacy. This means the driver has apparently NEVER worked properly
on Macintosh hardware.
Add documentation for the channel spacing details, and change to using
driver-specific initialization instead of hardcoded spacing so either
spacing can be used.
Fixes boot hang in QEMU when using the serial console, and fixes use on
Xserve serial (and presumably PowerMacs that have a Stealth Serial port
or similar)
Reviewed by: jhibbits
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D24661
Prepare support to be able to handle font data in loader, consolidate
data structures to sys/font.h and update vtfontcvt.
vtfontcvt update is about to output set of glyphs in form of C source,
the implementation does allow to output compressed or uncompressed font
bitmaps.
Reviewed by: bcr
Differential Revision: https://reviews.freebsd.org/D24189
This function returns NULL if the ring identified by
queue id and direction is in netmap mode. Otherwise
return the corresponding kring.
Use this function to replace vtnet_netmap_queue_on().
MFC after: 1 week
This partially reverts r361053 since there have been reports
by users that this breaks some functionality for em(4)
devices; it seems at first glance that some sort of interface
restart is required for those cards.
This isn't a proper fix; this unbreaks those users until a proper
fix is found for their issues.
PR: 240818
Reported by: Marek Zarychta <zarychtam@plan-b.pwste.edu.pl>
MFC after: 3 days
Allow the TCP header to reside in the mbuf following the IP header.
Else such packets will get dropped.
Backtrace:
mlx5e_sq_xmit()
mlx5e_xmit()
ether_output_frame()
ether_output()
ip_output_send()
ip_output()
rip_output()
sosend_generic()
sosend()
kern_sendit()
sendit()
sys_sendto()
amd64_syscall()
fast_syscall_common()
MFC after: 1 week
Sponsored by: Mellanox Technologies
Typically the TCP/IP headers fit within the first mbuf and should not
trigger any of the error cases. Use unlikely() for these cases.
No functional change.
MFC after: 1 week
Sponsored by: Mellanox Technologies
When parsing the TCP/IP header in the fast path, make it clear by using
the const keyword, no fields are to be modified inside the transmitted
packet.
No functional change.
MFC after: 1 week
Sponsored by: Mellanox Technologies
I2C_SET was quite inflexible, it used too long delays as well as some
unnecessary delays. The new building blocks are iicbb_clockin and
iicbb_clockout. The former sets SDA and starts the high period of SCL,
the latter executes the low period of SCL. What happens during the high
phase depends on the operation. For writes we just hold both lines, for
reads we poll SDA. S, Sr and P change SDA in the middle of the high
period.
Also, the calculation of udelay has been updated, so that the resulting
period more closely corresponds the requested bus frequency. There is a
new knob, io_delay, that allows to further adjust udelay based on the
estimated latency of pin toggling operations.
Finally, I slightly changed debug tracing and added error indicators to
it. The debug prints are compiled in but disabled by default. This can
be of use if there is any fallout from this change.
Some ideas for further improvements:
- add a function for sub-microsecond delays (e.g., in units of 1/10th of
a microsecond) and use it for more precise timing of short delays;
- account for the actual time spent in the pin I/O.
Some sample debug output with the new code follows.
Reading temperature and humidity from HTU21 in the bus hold mode:
<<w80+ we3+ <w81+ .....r6d+ rac+ r94- >>
<<w80+ we5+ <w81+ .............r47+ re2+ r84- >>
where '<<' is S, '<' is Sr, '>>' is P, '.' is one millisecond of clock
stretching by the slave.
Reading temperature and humidity in the no-hold mode:
<<w80+ wf3+ >>
<<w81- >>
<<w81+ r6d+ r54+ raf- >>
<<w80+ wf5+ >>
<<w81- >>
<<w81+ r48+ r4e+ r9c- >>
where '+' is Ack and '-' is NoAck.
We see that first read attempts are not acknowledged.
MFC after: 4 weeks
Differential Revision: https://reviews.freebsd.org/D22206
It seems that second call does not add any useful state change for all
implemented timecounters.
Discussed with: bde
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
Writing segment id to I2C device 0x30 only required if the segment is
non-zero. On the devices without E-DCC support writing to that address
fails and whole transaction then fails too. To avoid this do
not attempt write to the segment selection device unless required.
MFC after: 2 weeks
- crypto_apply() is only used for reading a buffer to compute a
digest, so change the data pointer to a const pointer.
- To better match m_apply(), change the data pointer type to void *
and the length from uint16_t to u_int. The length field in
particular matters as none of the apply logic was splitting requests
larger than UINT16_MAX.
- Adjust the auth_xform Update callback to match the function
prototype passed to crypto_apply() and crypto_apply_buf(). This
removes the needs for casts when using the Update callback.
- Change the Reinit and Setkey callbacks to also use a u_int length
instead of uint16_t.
- Update auth transforms for the changes. While here, use C99
initializers for auth_hash structures and avoid casts on callbacks.
Reviewed by: cem
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25171
The original PCIe hot-plug code required a couple of things which cause
PCI probing errors on the QEMU Q35 system and possibly physical systems
(Dell R6515).
Allocate the hot-plug interrupt as shared to support INTx interrupts.
The hot-plug interrupt mechanism should normally be MSI as PCIe mandates
MSI support, but QEMU's Q35 bridge only provides INTx interrupts.
Second, the code required the Electromechanical Interlock (Slot Status
EIS) to be engaged if present (Slot Capability EIP). Some platforms
including QEMU Q35 set EIP but not EIS. Fix by deleting the check.
Reviewed by: imp, mav, jhb
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24877
