td_ru. This removes the requirement for per-process synchronization in
statclock() and mi_switch(). This was previously supported by
sched_lock which is going away. All modifications to rusage are now
done in the context of the owning thread. reads proceed without locks.
- Aggregate exiting threads rusage in thread_exit() such that the exiting
thread's rusage is not lost.
- Provide a new routine, rufetch() to fetch an aggregate of all rusage
structures from all threads in a process. This routine must be used
in any place requiring a rusage from a process prior to it's exit. The
exited process's rusage is still available via p_ru.
- Aggregate tick statistics only on demand via rufetch() or when a thread
exits. Tick statistics are kept in the thread and protected by sched_lock
until it exits.
Initial patch by: attilio
Reviewed by: attilio, bde (some objections), arch (mostly silent)
Probabilly, a general approach is not the better solution here, so we should
solve the sched_lock protection problems separately.
Requested by: alc
Approved by: jeff (mentor)
Change the VOP_OPEN(), vn_open() vnode operation and d_fdopen() cdev operation
argument from being file descriptor index into the pointer to struct file.
Proposed and reviewed by: jhb
Reviewed by: daichi (unionfs)
Approved by: re (kensmith)
These functions are intended to do the same actions of sx_xlock() and
sx_slock() but with the difference to perform an interruptible sleep, so
that sleep can be interrupted by external events.
In order to support these new featueres, some code renstruction is needed,
but external API won't be affected at all.
Note: use "void" cast for "int" returning functions in order to avoid tools
like Coverity prevents to whine.
Requested by: rwatson
Tested by: rwatson
Reviewed by: jhb
Approved by: jeff (mentor)
vm_map_pmap_enter() unless the caller is madvise(MADV_WILLNEED). With
the exception of calls to vm_map_pmap_enter() from
madvise(MADV_WILLNEED), vm_fault_prefault() and vm_map_pmap_enter()
are both used to create speculative mappings. Thus, always
reactivating cached pages is a mistake. In principle, cached pages
should only be reactivated by an actual access. Otherwise, the
following misbehavior can occur. On a hard fault for a text page the
clustering algorithm fetches not only the required page but also
several of the adjacent pages. Now, suppose that one or more of the
adjacent pages are never accessed. Ultimately, these unused pages
become cached pages through the efforts of the page daemon. However,
the next activation of the executable reactivates and maps these
unused pages. Consequently, they are never replaced. In effect, they
become pinned in memory.
vmcnts. This can be used to abstract away pcpu details but also changes
to use atomics for all counters now. This means sched lock is no longer
responsible for protecting counts in the switch routines.
Contributed by: Attilio Rao <attilio@FreeBSD.org>
VM_PHYSSEG_SPARSE depending on whether the physical address space is
densely or sparsely populated with memory. The effect of this
definition is to determine which of two implementations of
vm_page_array and PHYS_TO_VM_PAGE() is used. The legacy
implementation is obtained by defining VM_PHYSSEG_DENSE, and a new
implementation that trades off time for space is obtained by defining
VM_PHYSSEG_SPARSE. For now, all architectures except for ia64 and
sparc64 define VM_PHYSSEG_DENSE. Defining VM_PHYSSEG_SPARSE on ia64
allows the entirety of my Itanium 2's memory to be used. Previously,
only the first 1 GB could be used. Defining VM_PHYSSEG_SPARSE on
sparc64 allows USIIIi-based systems to boot without crashing.
This change is a combination of Nathan Whitehorn's patch and my own
work in perforce.
Discussed with: kmacy, marius, Nathan Whitehorn
PR: 112194
contigmalloc2() was always testing the first physical page for PG_ZERO,
not the current page of interest.
Submitted by: Michael Plass
PR: 81301
MFC after: 1 week
The problem is this: vm_fault_additional_pages() calls vm_pager_has_page(),
which calls vnode_pager_haspage(). Now when VOP_BMAP() returns an error (eg.
EOPNOTSUPP), vnode_pager_haspage() returns TRUE without initializing 'before'
and 'after' arguments, so we have some accidental values there. This bascially
was causing this condition to be meet:
if ((rahead + rbehind) >
((cnt.v_free_count + cnt.v_cache_count) - cnt.v_free_reserved)) {
pagedaemon_wakeup();
[...]
}
(we have some random values in rahead and rbehind variables)
I'm not entirely sure this is the right fix, maybe we should just return FALSE
in vnode_pager_haspage() when VOP_BMAP() fails?
alc@ knows about this problem, maybe he will be able to come up with a better
fix if this is not the right one.
causing a crash.
Suppose that we have two objects, obj and backing_obj, where
backing_obj is obj's backing object. Further, suppose that
backing_obj has a reference count of two. One being the reference
held by obj and the other by a map entry. Now, suppose that the map
entry is deallocated and its reference removed by
vm_object_deallocate(). vm_object_deallocate() recognizes that the
only remaining reference is from a shadow object, obj, and calls
vm_object_collapse() on obj. vm_object_collapse() executes
if (backing_object->ref_count == 1) {
/*
* If there is exactly one reference to the backing
* object, we can collapse it into the parent.
*/
vm_object_backing_scan(object, OBSC_COLLAPSE_WAIT);
vm_object_backing_scan(OBSC_COLLAPSE_WAIT) executes
if (op & OBSC_COLLAPSE_WAIT) {
vm_object_set_flag(backing_object, OBJ_DEAD);
}
Finally, suppose that either vm_object_backing_scan() or
vm_object_collapse() sleeps releasing its locks. At this instant,
another thread executes vm_object_split(). It crashes in
vm_object_reference_locked() on the assertion that the object is not
dead. If, however, assertions are not enabled, it crashes much later,
after the object has been recycled, in vm_object_deallocate() because
the shadow count and shadow list are inconsistent.
Reviewed by: tegge
Reported by: jhb
MFC after: 1 week
1) Eliminate an unnecessary check for fictitious pages. Specifically,
only device-backed objects contain fictitious pages and the object is
not device-backed.
2) Change the types of "psize" and "tmpidx" to vm_pindex_t in order to
prevent possible wrap around with extremely large maps and objects,
respectively. Observed by: tegge (last summer)
immediately flag any page that is allocated to a OBJT_PHYS object as
unmanaged in vm_page_alloc() rather than waiting for a later call to
vm_page_unmanage(). This allows for the elimination of some uses of
the page queues lock.
Change the type of the kernel and kmem objects from OBJT_DEFAULT to
OBJT_PHYS. This allows us to take advantage of the above change to
simplify the allocation of unmanaged pages in kmem_alloc() and
kmem_malloc().
Remove vm_page_unmanage(). It is no longer used.
vm_page_free_toq() to account for recent changes that allow
vm_page_free_toq() to be called on some pages without the page queues lock
being held, specifically, pages that are not contained in a vm object and
not a member of a page queue. (Examples of such pages include page table
pages, pv entry pages, and uma small alloc pages.)
is actually being added to the hold queue, not the free queue. At the same
time, avoid unnecessary tests to wake up threads waiting for free memory
and the idle thread that zeroes free pages. (These tests will be performed
later when the page finally moves from the hold queue to the free queue.)
boot by MD code to indicated detected alignment preference. Rather than
cache alignment being encoded in UMA consumers by defining a global
alignment value of (16 - 1) in UMA_ALIGN_CACHE, UMA_ALIGN_CACHE is now
a special value (-1) that causes UMA to look at registered alignment. If
no preferred alignment has been selected by MD code, a default alignment
of (16 - 1) will be used.
Currently, no hardware platforms specify alignment; architecture
maintainers will need to modify MD startup code to specify an alignment
if desired. This must occur before initialization of UMA so that all UMA
zones pick up the requested alignment.
Reviewed by: jeff, alc
Submitted by: attilio
- Restore support for fetching swap information from crash dumps via
kvm_get_swapinfo(3) to fix pstat -T/-s on crash dumps.
Reviewed by: arch@, phk
MFC after: 1 week
zone. Cluster allocations fail when this happens. Also processes that may have
blocked on cluster allocations will never be woken up. Thanks to rwatson for
an overview of the issue and pointers to the mbuma paper and his tool to dump
out UMA zones.
Reviewed by: andre@
maxpages on a zone is woken up, with the rest never being woken up as
a result of the ZFLAG_FULL flag being cleared. Wakeup all such blocked
procsses instead. This change introduces a thundering herd, but since
this should be relatively infrequent, optimizing this (by introducing
a count of blocked processes, for example) may be premature.
Reviewd by: ups@
setrunqueue() was mostly empty. The few asserts and thread state
setting were moved to the individual schedulers. sched_add() was
chosen to displace it for naming consistency reasons.
- Remove adjustrunqueue, it was 4 lines of code that was ifdef'd to be
different on all three schedulers where it was only called in one place
each.
- Remove the long ifdef'd out remrunqueue code.
- Remove the now redundant ts_state. Inspect the thread state directly.
- Don't set TSF_* flags from kern_switch.c, we were only doing this to
support a feature in one scheduler.
- Change sched_choose() to return a thread rather than a td_sched. Also,
rely on the schedulers to return the idlethread. This simplifies the
logic in choosethread(). Aside from the run queue links kern_switch.c
mostly does not care about the contents of td_sched.
Discussed with: julian
- Move the idle thread loop into the per scheduler area. ULE wants to
do something different from the other schedulers.
Suggested by: jhb
Tested on: x86/amd64 sched_{4BSD, ULE, CORE}.
allocations were made using improper flags in interrupt context.
Replace with a simple WITNESS warning call. This restores the
invariant that M_WAITOK allocations will always succeed or die
horribly trying, which is relied on by many UMA consumers.
MFC after: 3 weeks
Discussed with: jhb
- Add a printf in swp_pager_meta_build() to warn if the swapzone becomes
exhausted so that there's at least a warning before a box that runs out
of swapzone space before running out of swap space deadlocks.
MFC after: 1 week
Reviwed by: alc
Make part of John Birrell's KSE patch permanent..
Specifically, remove:
Any reference of the ksegrp structure. This feature was
never fully utilised and made things overly complicated.
All code in the scheduler that tried to make threaded programs
fair to unthreaded programs. Libpthread processes will already
do this to some extent and libthr processes already disable it.
Also:
Since this makes such a big change to the scheduler(s), take the opportunity
to rename some structures and elements that had to be moved anyhow.
This makes the code a lot more readable.
The ULE scheduler compiles again but I have no idea if it works.
The 4bsd scheduler still reqires a little cleaning and some functions that now do
ALMOST nothing will go away, but I thought I'd do that as a separate commit.
Tested by David Xu, and Dan Eischen using libthr and libpthread.
