arguments as appropriate. This is necessary because setting OBJFORMAT=aout
in the makefile doesn't get exported to the environment. I wish our
make could do that!
Added PR kern/7177 for SECAM Video Highway Xtreme with single crystal
PLL configuration submitted by Vsevolod Lobko <seva@alex-ua.com>.
In kernel configuration file add
options OVERRIDE_CARD=2
options OVERRIDE_TUNER=11
options BKTR_USE_PLL
Submitted by: Roger Hardiman <roger@cs.strath.ac.uk>
Normally the full 640x480 (768x576 PAL) image is grabbed. This ioctl
allows a smaller area from anywhere within the video image to be
grabbed, eg a 400x300 image from (50,10).
See restrictions in BT848SCAPAREA.
Submitted by: Roger Hardiman <roger@cs.strath.ac.uk>
- moved definition of MACHINE_ARCH from cpu.h to parm.h as alpha.
- Added definitions of _MACHINE and _MACHINE_ARCH.
- Added hw.ispc98. The hw.ispc98 is 1 in PC98 kernel and is 0 in
IBM-PC kernel.
Discussed with: John Birrell <jb@FreeBSD.ORG>
XFree86 server, users need to create the following links in their
/compat/linux/dev directory (assuming kernel configured with 4 VTs).
lrwxrwxrwx 1 root wheel 7 Aug 30 22:59 tty0 -> console
lrwxrwxrwx 1 root wheel 5 Aug 30 22:45 tty1 -> ttyv0
lrwxrwxrwx 1 root wheel 5 Aug 30 22:45 tty2 -> ttyv1
lrwxrwxrwx 1 root wheel 5 Aug 30 22:45 tty3 -> ttyv2
lrwxrwxrwx 1 root wheel 5 Aug 30 22:45 tty4 -> ttyv3
VT switching is still not yet supported. Attempting to switch VT
currently will cause Xserver bus error.
Submitted by: Chain Lee <chain@110.net>
a kernel be built and installed at just the right time. If the system
were to be rebooted after installing the 3.0 binaries without the
new kernel, the system is hosed.
The addition of this config file reserves the name of the config file
that the upgrade procedure uses. If an upgrade is to be performed on
a 2.2.5/6/7 system system for which a GENERIC kernel is inadequate,
this config file must be replace with a suitable one before performing
the upgrade.
On systems which report 'uname -r' as 3.0-CURRENT, the kernel build
is not performed and this file is ignored.
Add a sysctl 'machdep.cs_recv_delay' to specify how long to wait after
receiving a packet in order to check for a subsequent (back-to-back)
packet. The cs8900 has a very small receive buffer, so this helps avoid
overflows at the cost of some extra CPU overhead.
Submitted by: Oleg Sharoiko <os@rsu.ru>, MIHIRA "Sanpei" Yoshiro <sanpei@sanpei.org>
Add some overflow checks to read/write (from bde).
Change all modifications to vm_page::flags, vm_page::busy, vm_object::flags
and vm_object::paging_in_progress to use operations which are not
interruptable.
Reviewed by: Bruce Evans <bde@zeta.org.au>
for the Lite2 fix for always returning EIO in dead_read().
Cleaned up the cdevswitch initializers for all tty drivers.
Removed explicit calls to ttsetwater() from all (tty) drivers. ttsetwater()
is now called centrally for opens, not just for parameter changes.
The check for dropping unicast packets not sent to our ethernet
address is after the bpf tap, but not conditioned on it. All packets
received should get handed to bpf, and unicast packets not to us (mac)
should get dropped whether or not there is a bpf listener. I believe
that the common optimization that the interface is in hw promisc mode
iff there is a bpf listener is in general wrong, but more frequently
so on wavelans.
I think Max's fix makes bpf listeners not see unicast packets sent to
others, but I'm not sure.
One can argue that checking on MOD_ENAL is wrong, but the code only
drops packets that shouldn't be received. The correctness condition
is that it be run whenever unicast packets without our mac address can
be received.
PR: kern/7144
Submitted by: Greg Troxel <gdt@ir.bbn.com>
for 1 second's worth of input) and larger tty output buffers. The
interrupt-level buffers are still too small for speeds above 115200
bps (only a little too small for 230400 bps if RTS flow control is
enabled).
Don't call ttsetwater() explicitly in open(). It is now called for
the TTYDISC l_open() and should be static.
Don't attempt to register the cdevsw more than once.
I don't have access to a real VT220 to verify this against.
However, I'm committing the patch in `good faith' because
(a) getting hold of a real VT220 is going to be increasingly difficult
the longer the PR sits around,
(b) some one was troubled enough to in a PR and
(c) the fix is minor and has no other implications.
PR: 7559
Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de>
in a SMP system. Unexpected things could happen if each cpu
has a different ldt setting and one cpu tries to use value
of currentldt set by another cpu.
The fix is to move currentldt to the per-cpu area. It includes
patches I filed in PR i386/6219 which are also user ldt related.
PR: i386/7591, i386/6219
Submitted by: Luoqi Chen <luoqi@watermarkgroup.com>
not the necessarily the same as the seconds part of getmicrotime()
yet, and anyway, we should have used `time_second' if we only wanted
a sloppy value for the seconds part. There is no point in making
ibcs2's time(2) more efficient than FreeBSD's time(3).
stability now. ALso modify /sys/conf/files, /sys/i386/conf/GENERIC
and /sys/i386/conf/LINT to add entries for the XL driver. Deactivate
support for the XL adapters in the vortex driver. LAstly, add a man
page.
(Also added an MLINKS entry for the ThunderLAN man page which I forgot
previously.)
