In such a case the second argument to lock_delay_arg_init was NULL which was
immediately causing a null pointer deref.
Since the sructure is only used for spin count, provide a dedicate routine
initializing it.
Reported by: andrew
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718
_sleep(9), wakeup(9), sleepqueue(9), et al do not dereference or modify the
channel pointers provided in any way; they are merely used as intptrs into a
dictionary structure to match waiters with wakers. Correctly annotate this
such that _sleep() and wakeup() may be used on const pointers without
invoking ugly patterns like __DECONST(). Plumb const through all of the
underlying sleepqueue bits.
No functional change.
Reviewed by: rlibby
Discussed with: kib, markj
Differential Revision: https://reviews.freebsd.org/D22914
First, this removes a spurious difference compared to rw locks.
More importantly though this avoids a trip through sleepq code if the lock
happens to be caught in this state.
The flag is not used by anything for years and supporting it requires an
explicit read from the lock when entering slow path.
Flag value is left unused on purpose.
Sponsored by: The FreeBSD Foundation
Change the assert paths in rm, rw, and sx locks to match the lock
and unlock paths. I did this for mutexes in r306346.
Reported by: Travis Lane <tlane@isilon.com>
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
If a thread waiting on sx dropped Giant it would not be properly
reacquired on exit from the routine, later resulting in panics
indicating Giant is not held (when it should be).
The bug was not present in the original patch sent to pho, I wittingly
added it just prior to the commit and only smoke-tested it.
Reported by: pho
A constant stream of readers could completely starve writers and this is not
a hypothetical scenario.
The 'poll2_threads' test from the will-it-scale suite reliably starves writers
even with concurrency < 10 threads.
The problem was run into and diagnosed by dillon@backplane.com
There was next to no change in lock contention profile during -j 128 pkg build,
despite an sx lock being at the top.
Tested by: pho
Now that 10 years have passed since the original limit of 10000 was
committed, bump it a little bit.
Spinning waiting for writers is semi-informed in the sense that we always
know if the owner is running and base the decision to spin on that.
However, no such information is provided for read-locking. In particular
this means that it is possible for a write-spinner to completely waste cpu
time waiting for the lock to be released, while the reader holding it was
preempted and is now waiting for the spinner to go off cpu.
Nonetheless, in majority of cases it is an improvement to spin instead of
instantly giving up and going to sleep.
The current approach is pretty simple: snatch the number of current readers
and performs that many pauses before checking again. The total number of
pauses to execute is limited to 10k. If the lock is still not free by
that time, go to sleep.
Given the previously noted problem of not knowing whether spinning makes
any sense to begin with the new limit has to remain rather conservative.
But at the very least it should also be related to the machine. Waiting
for writers uses parameters selected based on the number of activated
hardware threads. The upper limit of pause instructions to be executed
in-between re-reads of the lock is typically 16384 or 32678. It was
selected as the limit of total spins. The lower bound is set to
already present 10000 as to not change it for smaller machines.
Bumping the limit reduces system time by few % during benchmarks like
buildworld, buildkernel and others. Tested on 2 and 4 socket machines
(Broadwell, Skylake).
Figuring out how to make a more informed decision while not pessimizing
the fast path is left as an exercise for the reader.
The slow path is always taken when lockstat is enabled. This induces
rdtsc (or other) calls to get the cycle count even when there was no
contention.
Still go to the slow path to not mess with the fast path, but avoid
the heavy lifting unless necessary.
This reduces sys and real time during -j 80 buildkernel:
before: 3651.84s user 1105.59s system 5394% cpu 1:28.18 total
after: 3685.99s user 975.74s system 5450% cpu 1:25.53 total
disabled: 3697.96s user 411.13s system 5261% cpu 1:18.10 total
So note this is still a significant hit.
LOCK_PROFILING results are not affected.
The code already pays the cost of reading the lock to obtain the waiters
flag. Checking whether there is more than one reader is not a problem and
avoids dirtying the line.
This also fixes a small corner case: if waiters were to show up between
reading the flag and upgrading the lock, the operation would fail even
though it should not. No correctness change here though.
If there were exactly rowner_retries/asx_retries (by default: 10) transitions
between read and write state and the waiters still did not get the lock, the
next owner -> reader transition would result in the code correctly falling
back to turnstile/sleepq where it would incorrectly think it was waiting
for a writer and decide to leave turnstile/sleepq to loop back. From this
point it would take ts/sq trips until the lock gets released.
The bug sometimes manifested itself in stalls during -j 128 package builds.
Refactor the code to fix the bug, while here remove some of the gratituous
differences between rw and sx locks.
With the option used to compile the kernel both sx and rw shared ops would
always go to the slow path which added avoidable overhead even when the
facility is disabled.
Furthermore the increased time spent doing uncontested shared lock acquire
would be bogusly added to total wait time, somewhat skewing the results.
Restore old behaviour of going there only when profiling is enabled.
This change is a no-op for kernels without LOCK_PROFILING (which is the
default).
In both rw and sx locks we always go to sleep if the lock owner is not
running.
We do spin for some time if the lock is read-locked.
However, if we decide to go to sleep due to the lock owner being off cpu
and after sleepq/turnstile gets acquired the lock is read-locked, we should
fallback to the aforementioned wait.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
sleepq is only locked if the curhtread is the last reader. By the time
the lock gets acquired new ones could have arrived. The previous code
would unlock and loop back. This results spurious relocking of sleepq.
This is a step towards xadd-based unlock routine.
In order to go to sleep threads set waiter flags, but that can spuriously
fail e.g. when a new reader arrives. Instead of unlocking everything and
looping back, re-evaluate the new state while still holding the lock necessary
to go to sleep.
An assertion was modified to use the found value, but it was not updated to
handle a race where blocked threads appear after the entrance to the func.
Move the assertion down to the area protected with sleepq lock where the
lock is read anyway. This does not affect coverage of the assertion and
is consistent with what rw locks are doing.
Reported by: Shawn Webb
The pair is of use only in debug or LOCKPROF kernels, but was passed (zeroed)
for many locks even in production kernels.
While here whack the tid argument from wlock hard and xlock hard.
There is no kbi change of any sort - "external" primitives still accept the
pair.
Previous code would always spin once before checking the lock. But a lock
with e.g. 6 readers is not going to become free in the duration of once spin
even if they start draining immediately.
Conservatively perform one for each reader.
Note that the total number of allowed spins is still extremely small and is
subject to change later.
MFC after: 1 week
spin first instant of instantly re-readoing and don't re-read after
spinning is finished - the state is already known.
Note the code is subject to significant changes later.
MFC after: 1 week
Most of the lock slowpaths assert that the calling thread isn't an idle
thread. However, this may not be true if the system has panicked, and in
some cases the assertion appears before a SCHEDULER_STOPPED() check.
MFC after: 3 days
Sponsored by: Dell EMC Isilon
Unclear how, but the locking routine for mutexes was using the *release*
barrier instead of acquire. This must have been either a copy-pasto or bad
completion.
Going through other uses of atomics shows no barriers in:
- upgrade routines (addressed in this patch)
- sections protected with turnstile locks - this should be fine as necessary
barriers are in the worst case provided by turnstile unlock
I would like to thank Mark Millard and andreast@ for reporting the problem and
testing previous patches before the issue got identified.
ps.
.-'---`-.
,' `.
| \
| \
\ _ \
,\ _ ,'-,/-)\
( * \ \,' ,' ,'-)
`._,) -',-')
\/ ''/
) / /
/ ,'-'
Hardware provided by: IBM LTC
Since fcmpset can fail without lock contention e.g. on arm, it was possible
to get spurious failures when the caller was expecting the primitive to succeed.
Reported by: mmel
sx primitives use inlines as opposed to macros. Change the tested condition
to LOCK_DEBUG which covers the case, but is slightly overzelaous.
Reported by: kib
It is only needed if the LOCK_PROFILING is enabled. It has to always check if
the lock is about to be released which requires an avoidable read if the option
is not specified..
They all fallback to the slow path if necessary and the check is there.
This means a panicked kernel executing code from modules will be able to
succeed doing actual lock/unlock, but this was already the case for core code
which has said primitives inlined.
Update comments to note these functions are reachable if lockstat is
enabled.
Check if the lock has any bits set before attempting unlock, which saves
an unnecessary atomic operation.
Previous implementation would use a random factor to spread readers and
reduce chances of starvation. This visibly reduces effectiveness of the
mechanism.
Switch to the more traditional exponential variant. Try to limit starvation
by imposing an upper limit of spins after which spinning is half of what
other threads get. Note the mechanism is turned off by default.
Reviewed by: kib (previous version)
When a relevant lockstat probe is enabled the fallback primitive is called with
a constant signifying a free lock. This works fine for typical cases but breaks
with recursion, since it checks if the passed value is that of the executing
thread.
Read the value if necessary.
