There is no reason to keep the two knobs separate: if tests are
enabled, the ATF libraries are required; and if tests are disabled,
the ATF libraries are not necessary. Keeping the two just serves
to complicate the build.
Reviewed by: freebsd-testing
Approved by: rpaulo (mentor)
used by auditing tools to determine the userland patch level when it
differs from what `uname -r` reports. This can happen when the system
is kept up-to-date using freebsd-update and the last SA did not touch
the kernel, or when a new kernel has been installed but the system has
not yet rebooted.
Approved by: re (glebius)
On MIPS the .dynamic section is read-only, so the pointer to rtld
information for debuggers cannot be stored there (in DT_DEBUG).
Instead, a special section .rld_map is used.
Sponsored by: DARPA, AFRL
Approved by: re (delphij)
available in 32-bit compatibility mode, unconditional.
Overhaul the man page, which had evolved more by accretion than by design.
Approved by: re (gjb)
MFC after: 3 weeks
PATH_MAX after the token substitution. This is wrong, because
origin_subst_one() performs the substitution on the whole rpath and
similar strings, which contain several pathes separated by colon. As
result, long (but correct) rpath consisting of many path elements is
rejected by the function.
Correct the problem by rewriting the origin_subst_one() to perform two
passes, first pass to calculate the number of substitutions to be
performed, and second pass to generate the resulting string. Second
pass allocates the memory for the result based on the count from the
first pass, without enforcing a limit.
Reported and tested by: pgj
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Normal libraries have base address 0 and are unaffected by this change.
PR: 176216
Submitted by: Damjan Jovanovic <damjan.jov@gmail.com>
Reviewed by: kib
MFC after: 1 week
Since ARP and routing are separated, "proxy only" entries
don't have any meaning, thus we don't need additional field
in sockaddr to pass SIN_PROXY flag.
New kernel is binary compatible with old tools, since sizes
of sockaddr_inarp and sockaddr_in match, and sa_family are
filled with same value.
The structure declaration is left for compatibility with
third party software, but in tree code no longer use it.
Reviewed by: ru, andre, net@
instead of /libexec/ld-elf.so.1. Below in the Makefile we execute
'chflags noschg ${DESTDIR}/usr/libexec/ld-elf.so.1', which follows
symlink and removes 'schg' flag from system's /libexec/ld-elf.so.1
instead of the one in DESTDIR. It is also more friendly to use
replative paths in symlink in case of jail/chroot environments.
Obtained from: WHEEL Systems
MFC after: 2 weeks
Rtld did not set FD_CLOEXEC on its internal file descriptors; therefore,
such a file descriptor may be passed to a process created by another thread
running in parallel to dlopen() or fdlopen().
No other threads are expected to be running during parsing of the hints
and libmap files but the file descriptors need not be passed to child
processes so add O_CLOEXEC there as well.
This change will break fdlopen() (as used by OpenPAM) on kernels without
F_DUPFD_CLOEXEC (added in July). Note that running new userland on old
kernels is not supported.
Reviewed by: kib
Previously atrun refused to run jobs if load average was not below fixed limit of 1.5.
PR: 173175
Reviewed by: peterj
Approved by: trasz (mentor)
MFC after: 2 weeks
current version of FreeBSD, this isn't guarenteed by the API.
Custom security modules, or future implementations of the setuid and
setgid may fail.
Submitted by: Erik Cederstrand
Approved by: cperciva
MFC after: 3 days
but committing it helps to get everyone on the same page and makes
sure we make progress.
Tinderbox breakages that are the result of this commit are entirely
the committer's fault -- in other words: buildworld testing on amd64
only.
Credits follow:
Submitted by: Garrett Cooper <yanegomi@gmail.com>
Sponsored by: Isilon Systems
Based on work by: keramida@
Thanks to: gnn@, mdf@, mlaier@, sjg@
Special thanks to: keramida@
In addition to adding missing `static' keywords:
- bin/dd: Pull in `extern.h' to guarantee consistency with source file.
- libexec/rpc.rusersd: Move shared globals into an extern.h.
- libexec/talkd: Move `debug' and `hostname' into extern.h.
- usr.bin/cksum: Put counters in extern.h, as they are used by ckdist/mtree.
- usr.bin/m4: Move `end_result' into extern.h.
- usr.sbin/services_mkdb: Move shared globals into an extern.h.
In addition to adding `static' where possible:
- bin/date: Move `retval' into extern.h to make it visible to date.c.
- bin/ed: Move globally used variables into ed.h.
- sbin/camcontrol: Move `verbose' into camcontrol.h and fix shadow warnings.
- usr.bin/calendar: Remove unneeded variables.
- usr.bin/chat: Make `line' local instead of global.
- usr.bin/elfdump: Comment out unneeded function.
- usr.bin/rlogin: Use _Noreturn instead of __dead2.
- usr.bin/tset: Pull `Ospeed' into extern.h.
- usr.sbin/mfiutil: Put global variables in mfiutil.h.
- usr.sbin/pkg: Remove unused `os_corres'.
- usr.sbin/quotaon, usr.sbin/repquota: Remove unused `qfname'.
This self-written compiler warning, which is hopefully going to be
committed into LLVM sources soon, warns about potentially missing
`static' keywords, similar to -Wmissing-prototypes.
- bin/pax: Move external declaration of chdname and s_mask into extern.h.
- bin/setfacl: Move setfacl.c-specific stuff out of setfacl.h.
- sbin/mount_fusefs: Remove char *progname; use getprogname().
- others: add `static' where possible.
The reserved space for fmt was exactly sufficient for a two-digit value of
MAXLOGNAME - 1.
PR: bin/171815
Submitted by: Jeremy Huddleston Sequoia
MFC after: 1 week
all in one command, with no permissions race.
2. Simplify the rotation logic by cd'ing into the directory, with a test
to make sure that it succeeds.
3. Remove any files numbered higher than entropy_save_num. This helps when
the user reduces the number, and may be useful for other purposes down
the road.
4. Simplify the rotation logic by first testing the common case (it's a
regular file) then testing if something else exists with the same name
using elif. Also switch from using jot to simpler countdown format.
5. Fix logger lines and error messages to be more consistent, and wrap the
code more consistently in the 80 column range. The "not a regular file"
error message was mistakenly wrapped entirely in "quotes" which caused
logger to include line-wrapping whitespace. Change that to wrap only
the variables in quotes, which is both consistent and works better.
6. Update copyright to reflect the fact that changes were made this year.
Parts of 2-4 were taken from etc/periodic/daily/310.accounting
This structure is not part of POSIX. According to POSIX, gettimeofday()
has the following prototype:
int gettimeofday(struct timeval *restrict tp, void *restrict tzp);
Also, POSIX states that gettimeofday() shall return 0 (as long as tzp is
not used). Remove dead error handling code. Also use NULL for a
nul-pointer instead of integer 0.
While there, change all pieces of code that only use tv_sec to use
time(3), as this provides less overhead.
The place where the function is called can be reached if object loading
and relocation fails too, in which case obj pointer will be NULL. Do not
call process_nodelete then, or crash will follow.
Pointy hat to: kan
Trying to up the reference from the load loop risks missing dependencies
that have not been loaded yet.
MFC afer: 1 week
Reported by: nox
Reviewd by: kib
This is not strictly required with the current ABI but will be when we
switch to the ARM EABI. The aapcs requires the stack to be 4 byte aligned
at all times and 8 byte aligned when calling a public subroutine where the
current ABI only requires sp to be a multiple of 4.
by John Marino <draco@marino.st>, with the following (edited) commit
message
Date: Sat, 24 Mar 2012 06:40:50 +0100
Subject: [PATCH 1/1] rtld: Implement DT_RUNPATH and -z nodefaultlib
DT_RUNPATH is incorrectly being considered as an alias of DT_RPATH. The
purpose of DT_RUNPATH is to have two different types of rpath: one that
can be overridden by the environment variable LD_LIBRARY_PATH and one that
can't. With the currently implementation, LD_LIBRARY_PATH will always
trump any embedded rpath or runpath tags.
Current path search order by rtld:
==================================
LD_LIBRARY_PATH
DT_RPATH / DT_RUNPATH (always the same)
ldconfig hints file (default: /var/run/ld-elf.so.hints)
/usr/lib
New path search order by rtld:
==============================
DT_RPATH of the calling object if no DT_RUNPATH
DT_RPATH of the main binary if no DT_RUNPATH and binary isn't calling obj
LD_LIBRARY_PATH
DT_RUNPATH
ldconfig hints file
/usr/lib
The new path search matches how the linux runtime loader works. The other
major added feature is support for linker flag "-z nodefaultlib". When
this flag is passed to the linker, rtld will skip all references to the
standard library search path ("/usr/lib" in this case but it could handle
more color delimited paths) except in DT_RPATH and DT_RUNPATH.
New path search order by rtld with -z nodefaultlib flag set:
============================================================
DT_RPATH of the calling object if no DT_RUNPATH
DT_RPATH of the main binary if no DT_RUNPATH and binary isn't calling obj
LD_LIBRARY_PATH
DT_RUNPATH
ldconfig hints file (skips all references to /usr/lib)
FreeBSD notes:
- we fixed some bugs which were submitted to DragonFly and merged there
as commit 1ff8a2bd3eb6e5587174c6a983303ea3a79e0002;
- we added LD_LIBRARY_PATH_RPATH environment variable to switch to
the previous behaviour of considering DT_RPATH a synonym for DT_RUNPATH;
- the FreeBSD default search path is /lib:/usr/lib and not /usr/lib.
Reviewed by: kan
MFC after: 1 month
MFC note: flip the ld_library_path_rpath default value for stable/9
relocations are performed before the object's initializer is called.
When dlopen()ing an object, relocate the whole DAG rooted in the
object instead of only relocating the object itself and list of newly
loaded dependencies.
Reversed sequence currently can occur if the same object is a
dependency for both filtee and filter, since filtees are loaded
typically during the relocation processing, when some filter
dependencies might be already loaded but not relocated yet.
Reported and tested by: swills
Reviewed by: kan
MFC after: 1 week
object, and eliminate the pread(2) call as well [1]. Mmap the first
page of the object temporaly, and unmap it on error or last use.
Potentially, this leaves one-page gap between succeeding dlopen(3),
but there are other mmap(2) consumers as well.
Fix several cases were the whole mapping of the object leaked on error.
Use MAP_PREFAULT_READ for mmap(2) calls which map real object pages [2].
Insipired by the patch by: Ian Lepore <freebsd damnhippie dyndns org> [1]
Suggested by: alc [2]
MFC after: 2 weeks
