Justin T. Gibbs
c587405860
Have the aic7xxx build rules point at the sequencer's new location.
1995-04-16 01:20:00 +00:00
Peter Dufault
8909a72b5d
Add "sctarg" and document new SCSI_REPORT_GEOMETRY option for ache
1995-04-14 15:12:24 +00:00
Poul-Henning Kamp
e5f2c8f67e
Add "BREAK_TO_DEBUGGER" option.
1995-04-12 22:02:51 +00:00
Poul-Henning Kamp
8d89e37c73
I got that wrong,
...
lnc0 @ 0x280
lnc1 @ 0x300
moved le0 into sorted sequence.
1995-04-10 19:13:51 +00:00
Poul-Henning Kamp
1f9e6f1901
lnc0 is @ 0x300
...
lnc1 is @ 0x280
1995-04-10 19:12:29 +00:00
Jordan K. Hubbard
08d5844ce1
This is the new submission of the matcd driver. In addition to the
...
new driver code, there are diffs to several other existing files
on the system and a man page.
This version of matcd implements the rest of the key ioctls related to
playing audio CDs and reading table of contents information from any
type of disc.
This update also corrects several problems detected since the original
version 1(10) was released. These include:
1. Jordons report on the kernel -c string problem.
2. A problem with the driver being confused by other types of
devices located at addresses it probes.
3. An old CD TOC wouldn't always be cleared after a disc change.
4. Cleaned up code so -Wall yields no warnings on 2.0 and later.
5. A problem with drive getting out of sync with the driver when
changing between CD-Data and CD-DA.
There have only been two reports from the field relating to problems
so either the first release isn't really being used or doesn't have
many problems.
If there are any problems with this submission, please let me know.
Submitted by: Frank Durda IV <uhclem%nemesis@fw.ast.com>
1995-04-09 15:50:27 +00:00
Poul-Henning Kamp
63373752ea
Move default address of lnc0 to 0x300. Luigi Rizzo said that his card
...
cannot even go below 0x300...
1995-04-08 21:41:52 +00:00
Andrey A. Chernov
017e602c0c
pca: change IO_PPI to IO_TIMER1 due to syscons conflict
1995-04-08 16:08:35 +00:00
Joerg Wunsch
fe696eb64c
Update pcvt to 3.20 b24
1995-04-08 15:49:25 +00:00
Poul-Henning Kamp
12cfa43650
Added the "eg0" interface driver for the 3Com "3c505" or "etherlink/+"
...
card. This is the braindamaged card with the 80186 CPU on it. It is
slow, probably not very good after all, but hey, if you have one lying
around doing nothing anyway...
Added the "zp0" driver to GENERIC.
1995-04-08 09:36:04 +00:00
Andrey A. Chernov
e64ae15d3a
Add port IO_PPI for pca per Bruce suggestion
1995-04-06 14:01:20 +00:00
Jordan K. Hubbard
0264a8a9c6
0x330 is the default address for SB Midi, not 0x300
...
Submitted by: Doug Rabson <dfr@render.com>
1995-04-06 03:22:12 +00:00
Nate Williams
070e3ec139
Modify behavior of INCLUDES to never look in /usr/include unless we
...
can't find the src/include directory.
Reviewed by: "Rodney W. Grimes" <rgrimes@gndrsh.aac.dev.com>
Submitted by: Mike Pritchard <pritc003@maroon.tc.umn.edu>
1995-04-05 04:10:58 +00:00
Nate Williams
146e71662f
Added -I/usrinclude to the tail end of the INCLUDES line. This hack
...
will cause kernel compiles to work even if the src/includes directory
doesn't exist but still do the 'Right Thing' and pull files from the
source tree if it does exist.
Reviewed by: Bruce Evans
1995-04-03 01:13:50 +00:00
Stefan Eßer
7685716d64
Do not try to negotiate synchronous SCSI transfers in the Boot Kernel.
1995-03-30 15:41:33 +00:00
Rodney W. Grimes
ad0c439a34
Submitted by: Mahesh Neelakanta <mahesh@gcomm.com>
...
Change I/O address of Intel EtherExpress driver (ix0) from 0x280 to
0x300.
1995-03-30 00:20:08 +00:00
David Greenman
e5e6090541
Added NQNFS option and a comment warning about it's overhead.
1995-03-29 05:14:22 +00:00
Jordan K. Hubbard
9829c3ed2e
Change ahc driver comment to note that it's not just the 274x controller
...
it supports.
1995-03-28 08:14:55 +00:00
Bruce Evans
ce7c8b00ff
CVS:
...
Enable -Wimplicit again.
bash: /src/z1: No such file or directory
1995-03-28 08:02:37 +00:00
Andrey A. Chernov
18dbbebe5a
Add hooks for upcoming riscom/8 driver
1995-03-27 19:39:58 +00:00
Bruce Evans
8e4150e95a
Reviewed by:
...
Submitted by:
Obtained from:
Disable previous change. I missed a lot of implicit declarations.
1995-03-25 23:21:36 +00:00
Bruce Evans
feae7fb7d3
Add -Wimplicit to ${CWARNFLAGS} so that implicitly declared functions
...
don't come back. There are still a few for unsupported network protocols.
1995-03-25 17:50:19 +00:00
Jordan K. Hubbard
d9d537017f
scd driver now lives in non-GPL land.
1995-03-24 18:30:11 +00:00
Rodney W. Grimes
f8e028be26
Add Intel EtherExpress16 (ix0) driver.
...
Reviewed by:
Submitted by:
Obtained from:
1995-03-18 08:12:48 +00:00
Bruce Evans
3bf0c362ad
Remove isa/prof_machdep.c. It doesn't exist yet.
1995-03-16 17:18:49 +00:00
Peter Dufault
de6a307ec7
Document scsi options
1995-03-15 14:27:01 +00:00
David Greenman
d41f24e742
Added support for generic FDDI and the DEC DEFEA and DEFPA FDDI adapters.
...
Submitted by: Matt Thomas
1995-03-14 09:16:07 +00:00
Steven Wallace
a91ccb55cf
Change device entry examples to reflect the following:
...
Remove PAS-only entry for OPL as ache pointed out.
Update OPL comment to show OPL-2 or OPL-3 support as it is auto-detected.
1995-03-13 18:49:37 +00:00
Steven Wallace
12fd08535f
Remove old snd file configuration list and add new file list
...
for the snd controller and the different sound devices.
Update LINT to include all sound device drivers using new format.
Reviewed by: wollman
1995-03-12 23:43:15 +00:00
Bruce Evans
133d0cef4e
Fix config-time syntax errors in sound options.
1995-03-12 12:18:43 +00:00
Atsushi Murai
9cfb8f7ee9
Adding tunnel pseudo-device for Network Installation with User process PPP.
...
Reviewed by: amruai@spec.co.jp
1995-03-12 12:10:35 +00:00
Søren Schmidt
edf16d1564
Added ata.c device driver file.
...
Just so I don't have to repatch files.i386 again & again...
1995-03-07 21:15:30 +00:00
Ugen J.S. Antsilevich
7332d95a98
Restore IPACCT out there..
1995-03-06 10:33:34 +00:00
Joerg Wunsch
68cfe626f7
pcvt is still using the XSERVER option; document this.
1995-03-05 22:23:35 +00:00
Jordan K. Hubbard
ca83dc2de1
Upgrade the sound drivers to VoxWare pre-3.0 and fix a number of bugs.
...
Make the sound configuration a little neater
(see /sys/i386/isa/sound/Readme.freebsd)
Add support for the Microsoft Sound Source.
Document the sound options again.
Submitted by: Sujal Patel <smpatel@wam.umd.edu>
Obtained from: Voxware
1995-03-04 21:11:21 +00:00
David Greenman
403ef252fa
Removed obsolete vtrace() remnants.
1995-03-04 03:24:45 +00:00
Jordan K. Hubbard
3c034efc04
Finish the matcd import. My face is red.
1995-03-02 07:34:38 +00:00
Jordan K. Hubbard
05e1d9d455
Changes to incorporate the Matsushita CDROM driver (otherwise known as
...
the "Sound blaster CDROM").
Submitted by: Frank Durda IV <bsdmail@nemesis.lonestar.org>
1995-03-02 04:07:03 +00:00
Peter Dufault
ebc1a0e2f8
Added a little documentation on the fixed SCSI config and
...
fixed a few quirks that snuck in.
1995-03-01 22:27:45 +00:00
Justin T. Gibbs
0bf316f5ac
Fix "dependency" spelling error. Implement "clean" entries for device
...
config entries. Add clean rules to aic7xxx and aic7xxx_seq.h.
Submitted by: Pointed out by Bruce Evans <bde@zeta.org.au>
1995-03-01 10:08:07 +00:00
Bruce Evans
c5489d9047
Use relative include path and -nostdinc avoid getting anything from
...
/usr/include.
1995-02-26 05:05:53 +00:00
Bruce Evans
226d4c89da
Make diskslice files standard and remove option DISKSLICE. ufs_disksubr.c
...
needed a diskslice function yesterday and all disk drivers will need it.
The diskslice initialization routine should be configurable (but isn't).
1995-02-23 17:19:54 +00:00
Jordan K. Hubbard
9016a6c149
Remove FAT_CURSOR - it's deprecated.
...
Submitted by: "Philippe Charnier" <charnier@lirmm.fr>
1995-02-21 13:42:57 +00:00
Jordan K. Hubbard
f1f0a0bf8b
Remove the SCSI idsn line - it's permanantly dead.
1995-02-19 14:07:28 +00:00
Jordan K. Hubbard
f1f041888e
Remove the ISDN dialer from LINT until it's working.
1995-02-17 09:33:29 +00:00
Bruce Evans
94a7cbb03e
Restore alphabetical order (except gnu is last).
1995-02-17 08:45:59 +00:00
Poul-Henning Kamp
648c711bb4
This is the latest version of the APM stuff from HOSOKAWA, I have looked
...
briefly over it, and see some serious architectural issues in this stuff.
On the other hand, I doubt that we will have any solution to these issues
before 2.1, so we might as well leave this in.
Most of the stuff is bracketed by #ifdef's so it shouldn't matter too much
in the normal case.
Reviewed by: phk
Submitted by: HOSOKAWA, Tatsumi <hosokawa@mt.cs.keio.ac.jp>
1995-02-17 02:22:57 +00:00
Joerg Wunsch
c851c2f0ea
Include three lines about the pcvt console driver, so we don't ever need
...
a different config file for it.
1995-02-15 20:38:36 +00:00
Jordan K. Hubbard
f2eea8100f
We can enable pcd0 when we actually have one.
1995-02-15 06:18:15 +00:00
Jordan K. Hubbard
a46a6df7e5
Comment out snic0 until it gets updated to the newer scsi code.
1995-02-15 04:49:18 +00:00