Commit Graph

3288 Commits

Author SHA1 Message Date
Brooks Davis
c5d2d5a1ef Make setting mips endian and ABI less verbose.
Allow ABI to be over ridden to allow (with other changes) programs to be
built targeting ABIs other than the default.  This is used in CheriBSD.

Reviewed by:	imp
Obtained from:	CheriBSD
MFC after:	1 week
Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D21001
2019-07-19 23:39:21 +00:00
Emmanuel Vadot
5c5ed48a03 bsd.confs.mk: Test the correct value for the destination package
Reviewed by:	bapt, gjb
Differential Revision:	https://reviews.freebsd.org/D20961
2019-07-19 15:11:32 +00:00
Bryan Drewery
000a2e7040 Rework some multi-output target dependency handling.
This reworks my last commit in r301285 to more closely match what was in
r241298 (but reverted in r294878).

This is addressing "missing .meta file" rebuilds but also ensuring that
files are always generated when needed in each case.

Note that this is not a complete rework of the problem areas identified
in r301285 as most are "good enough" right now as the new pattern
is too verbose. It's only worth making this current change where headers
may be generated in the INCS list; where missing .meta file rebuilds are
spotted.

--- Technical details follow ---

Several attempts to deal with this problem of multi-output targets, with and
without META MODE, were explained in r241298, r294878, and r301285.

The general problem is with multi-output targets such as:
        foo.c foo.h:
                touch foo.c foo.h
        foo.c foo.h:
                touch foo.c
                touch foo.h
        foo.c foo.h: foo.in
                ./generator ${.ALLSRC}

This pattern is problematic in jobs mode as both files end up being
built concurrently and leads to races. With META MODE it is worse
as both targets end up rebuilding if they lack a .meta file. So the
generator is force built twice even though it is only needed once.
There are also problems in that 'make foo.h' may be ran before 'make foo.c';
The order of make generating the targets is not guaranteed.

An older attempted workaround to this (discussed in r294878) was:
        foo.h: foo.c
        foo.c: foo.in
                ./generator ${.ALLSRC}
This appears fine except that if foo.h is missing and foo.c exists then
foo.h will never be regenerated. This pattern is close to the solution
in this commit though:

        foo.h: foo.c .NOMETA
        .if !exists(foo.h)
        foo.c: .PHONY .META
        .endif
        foo.c: foo.in
                ./generator ${.ALLSRC}

There's 2 differences here:
1. foo.h will never expect to have a .meta file since the foo.c target
   will generate both and own the .meta file.
2. If foo.h does not exist then it needs to force foo.c to be rebuilt
   with .PHONY. That normally disables META MODE though so .META is
   given to tell bmake we do really expect a .meta file.

This pattern cannot work with implicit suffix rules since the .c and .h files
may be generated at different times (buildincludes vs depend/all).

Sponsored by:	Dell EMC
MFC after:	2 weeks
2019-07-19 00:15:25 +00:00
Bryan Drewery
3b53f994ea Consider *clean targets as non-build targets as well.
MFC after:	2 weeks
Sponsored by:	DellEMC
2019-07-04 14:51:44 +00:00
Leandro Lupori
0a0163ebde Fix missing powerpc64 in _LLVM_TARGET_FILT
This change was originally in D20378. Making it in a new diff since it's a
bugfix.

Submitted by:	alfredo.junior_eldorado.org.br
Reviewed by:	emaste, luporl
Differential Revision:	https://reviews.freebsd.org/D20756
2019-06-28 15:49:14 +00:00
Warner Losh
f5a95d9a07 Remove NAND and NANDFS support
NANDFS has been broken for years. Remove it. The NAND drivers that
remain are for ancient parts that are no longer relevant. They are
polled, have terrible performance and just for ancient arm
hardware. NAND parts have evolved significantly from this early work
and little to none of it would be relevant should someone need to
update to support raw nand. This code has been off by default for
years and has violated the vnode protocol leading to panics since it
was committed.

Numerous posts to arch@ and other locations have found no actual users
for this software.

Relnotes:	Yes
No Objection From: arch@
Differential Revision: https://reviews.freebsd.org/D20745
2019-06-25 04:50:09 +00:00
Justin Hibbits
e861dab451 powerpc: Transition to Secure-PLT, like most other OSs (Toolchain part)
Summary:
Toolchain follow-up to r349350.  LLVM patches will be submitted upstream for
9.0 as well.

The bsd.cpu.mk change is required because GNU ld assumes BSS-PLT if it
cannot determine for certain that it needs Secure-PLT, and some binaries do
not compile in such a way to make it know to use Secure-PLT.

Reviewed By: nwhitehorn, bdragon, pfg
Differential Revision: https://reviews.freebsd.org/D20598
2019-06-25 02:35:22 +00:00
Bryan Drewery
8e0c373903 Follow-up r349065: Fix .TARGET flag ambiguity with PROGS which broke MK_TESTS.
X-MFC-With:	r349065
Sponsored by:	DellEMC
2019-06-19 19:19:37 +00:00
Bryan Drewery
46dea205c6 Rework r349061: Don't apply guessed dependencies if there is a custom target.
This is still targeting bin/sh cyclic dependency issues.  Only apply
guessed dependencies that are explicitly set for an object (which
gnu/lib/cc/cc_tools needs) and if no custom target exists with its
own dependencies.

This was manifesting as a missing yacc.h in usr.bin/mkesdb_static when
built without -j (or -B). No actual yacc.h dependency ordering was
defined but with -j it got lucky and built fine.

Before r349061 the behavior was different for META_MODE but that logic
difference isn't needed.

X-MFC-With:	r349061
Sponsored by:	DellEMC
2019-06-18 22:00:38 +00:00
Bryan Drewery
ee4eeb3213 Allow DEPENDOBJS/DEPENDSRCS to work with only OBJS set and no SRCS.
Default to tracking .depend.* for OBJS rather than SRCS.

This helps cover some special case builds like gnu/lib/csu which
do more of a PROGS-like thing with bsd.prog.mk.

It is possible this causes out-of-tree Makefiles to have problems if they use
this pattern:
	foo.o: foo.c
		${CC} -o ${.TARGET} ${.ALLSRC}
This may cause multiple source files to be compiled due to finding the
'foo.o: foo.c' dependency both in the Makefile at the .depend file. Or
it may try compiling headers. This can be worked around by either of these:
	foo.o: foo.c
		${CC} -o ${.TARGET} ${.ALLSRC:N*.h:[1]}
Or
	foo.o: foo.c
		${CC} -o ${.TARGET} ${.CURDIR}/foo.c
In the latter case the ${.CURDIR} may need to be a different path. The
first case covers automatically using .PATH.

Sponsored by:	DellEMC
2019-06-15 17:08:35 +00:00
Bryan Drewery
9e0a1e78e5 META_MODE: Delete build targets that fail.
If a meta mode change is triggered but then the build fails then the
next build will not retrigger meta mode. This only prevented by
removing the target on rebuild or on the failure to rebuild.

Sponsored by:	DellEMC
2019-06-15 17:08:28 +00:00
Bryan Drewery
48da57b47f Add various CFLAGS/LDADD overrides for the output target file.
Sponsored by:	DellEMC
2019-06-15 17:08:24 +00:00
Bryan Drewery
3d04f5a9c4 Avoid generating DEPENDFILES='.depend.' when there's no DEPENDOBJS.
MFC after:	2 weeks
Sponsored by:	DellEMC
2019-06-15 17:08:21 +00:00
Bryan Drewery
05f8fb1fab Similar to r335710 avoid ccache when linking a .cc file directly.
Sponsored by:	DellEMC
2019-06-15 17:08:18 +00:00
Bryan Drewery
f39f6a562e Don't force OBJS_DEPEND_GUESS headers onto all objects.
This is in the case of not having any .depend.foo.o yet.  Don't force add *.h
as a dependency for those. They are built in beforebuild already when in
SRCS/DPSRCS.

This change allows custom rules, like in bin/sh/Makefile for mksyntax, to not
have cyclic dependency problems when connected to the .depend.* handling.

This is purposely not copied to sys/conf/kern.post.mk as it handles
generating headers slightly differently.

MFC after:	2 weeks
Sponsored by:	DellEMC
2019-06-15 17:08:02 +00:00
Bryan Drewery
4fc7bd0519 DPSRCS need to be built before recursing.
MFC after:	2 weeks
Sponsored by:	DellEMC
2019-06-10 19:38:35 +00:00
Enji Cooper
db933d76bb Fix up CXXSTD support originally added in r345708
r345708 worked for the base system, but unfortunately, caused a lot of
disruption for third-party packages that relied on C++, since bsd.sys.mk is
used by applications outside the base system. The defaults picked didn't match
the compiler's defaults and broke some builds that didn't specify a standard,
as well as some that overrode the value by setting `-std=gnu++14` (for
example) manually.

This change takes a more relaxed approach to appending `-std=${CXXSTD}` to
CXXFLAGS, by only doing so when the value is specified, as opposed to
overriding the standard set by an end-user. This avoids the need for having
to bake NOP default into bsd.sys.mk for supported compiler-toolchain
versions.

In order to make this change possible, add CXXSTD to Makefile snippets which
relied on the default value (c++11) added in r345708.

MFC after:      2 weeks
MFC with:       r345708, r346574
Reviewed by:    emaste
Reported by:    jbeich
Differential Revision: https://reviews.freebsd.org/D19895 (as part of a larger change)
2019-04-22 18:40:46 +00:00
Mitchell Horne
b2689b12b1 Add option to build LLVM RISC-V target
Reviewed by:	emaste, dim
Approved by:	markj (mentor)
MFC after:	3 weeks
Differential Revision:	https://reviews.freebsd.org/D19759
2019-04-07 18:24:26 +00:00
Marcin Wojtas
b0fefb25c5 Create kernel module to parse Veriexec manifest based on envs
The current approach of injecting manifest into mac_veriexec is to
verify the integrity of it in userspace (veriexec (8)) and pass its
entries into kernel using a char device (/dev/veriexec).
This requires verifying root partition integrity in loader,
for example by using memory disk and checking its hash.
Otherwise if rootfs is compromised an attacker could inject their own data.

This patch introduces an option to parse manifest in kernel based on envs.
The loader sets manifest path and digest.
EVENTHANDLER is used to launch the module right after the rootfs is mounted.
It has to be done this way, since one might want to verify integrity of the init file.
This means that manifest is required to be present on the root partition.
Note that the envs have to be set right before boot to make sure that no one can spoof them.

Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: sjg
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D19281
2019-04-03 03:57:37 +00:00
Enji Cooper
1c50bec8ef Allow programs to set NO_SHARED on a per-PROG basis
This is particularly useful when installing programs for tests that need to be
linked statically, e.g., mini-me from capsicum-test, which is linked statically
to avoid the dynamic library lookup in the upstream project.

Reviewed by:	emaste
Approved by:	emaste (mentor)
MFC after:	1 month
Differential Revision:	https://reviews.freebsd.org/D19756
2019-03-30 17:23:15 +00:00
Enji Cooper
b89cf12cc6 PROG_OVERRIDE_VARS should override default values if specified
The behavior prior to this change would not override default values if set in
`bsd.own.mk`, or (in the more general case) globally before `bsd.progs.mk` was
included. This affected `bsd.test.mk` as well, since it consumes
`bsd.progs.mk`.

Some examples of this failing behavior are as follows:

* `BINMODE` defaults to 0555 per `bsd.own.mk`. If someone wanted to set the
  `BINMODE` to `NOBINMODE` (0444) for `prog`, for example, like
  `BINMODE.prog= ${NOBINMODE}`, `bsd.progs.mk` would not honor the per-PROG
  setting.
* An application, `prog`, does not build at `WARNS?= 6`. Before this change,
  setting to a lower `WARNS` value, e.g., `WARNS.prog= 3`, would have been
  impossible, requiring that `prog` be built from another directory,
  the global `WARNS` be lowered, or a per-PROG value needing to be set
  across the board. None of the above workarounds is desirable.

This change unbreaks variables defined in `PROG_OVERRIDE_VARS` which have
defaults set before `bsd.progs.mk` is included, by setting them to their
defined values if set on a per-PROG basis.

Reviewed by:	asomers
Approved by:	emaste (mentor)
MFC after:	1 month
Differential Revision: https://reviews.freebsd.org/D19755
2019-03-30 00:57:33 +00:00
Enji Cooper
0eb97cca9f Allow users to override CSTD/CXXSTD on a per-prog basis
The current logic for CSTD/CXXSTD requires homogenity as far as the
supported C/C++ standards, which is a sensible default. However, when
dealing with differing versions of C++, some code may compile with C++11, but
not C++17 (for instance). So in order to avoid having people convert over their
code to the new standard, give the users the ability to specify the standard on
a per-program basis.

This will allow a user to override the supporting standard for a set of
programs, mixing C++11 with C++14 (for instance).

Reviewed by:	asomers
Apprved by:	emaste (mentor)
MFC after:	1 month
MFC with:	r345708
Differential Revision: https://reviews.freebsd.org/D19738
2019-03-29 18:49:08 +00:00
Enji Cooper
e8067928ff Standardize -std=c++* as CXXSTD`
CXXSTD was added as the C++ analogue to CSTD.

CXXSTD defaults to `-std=c++11` with supporting compilers; `-std=gnu++98`,
otherwise for older versions of g++.

This change standardizes the CXXSTD variable, originally added to
googletest.test.inc.mk as part of r345203.

As part of this effort, convert all `CXXFLAGS+= -std=*` calls to use `CXXSTD`.

Notes:

This value is not sanity checked in bsd.sys.mk, however, given the two
most used C++ compilers on FreeBSD (clang++ and g++) support both modes, it is
likely to work with both toolchains. This method will be refined in the future
to support more variants of C++, as not all versions of clang++ and g++ (for
instance) support C++14, C++17, etc.

Any manual appending of `-std=*` to `CXXFLAGS` should be replaced with CXXSTD.
Example:

Before this commit:
```
CXXFLAGS+=	-std=c++14
```

After this commit:
```
CXXSTD=	c++14
```

Reviewed by:	asomers
Approved by:	emaste (mentor)
MFC after:	1 month
MFC with:	r345203, r345704, r345705
Relnotes:	yes
Tested with:	make tinderbox
Differential Revision:	https://reviews.freebsd.org/D19732
2019-03-29 18:45:27 +00:00
Enji Cooper
bdbf3440ce Revert r345706: the third time will be the charm
When a review is closed via Phabricator it updates the patch attached to the
review. I downloaded the raw patch from Phabricator, applied it, and repeated
my mistake from r345704 by accident mixing content from D19732 and D19738.

For my own personal sanity, I will try not to mix reviews like this in the
future.

MFC after:	1 month
MFC with:	r345706
Approved by:	emaste (mentor, implicit)
2019-03-29 18:43:46 +00:00
Enji Cooper
760b1a815b Standardize -std=c++* as CXXSTD`
CXXSTD was added as the C++ analogue to CSTD.

CXXSTD defaults to `-std=c++11` with supporting compilers; `-std=gnu++98`,
otherwise for older versions of g++.

This change standardizes the CXXSTD variable, originally added to
googletest.test.inc.mk as part of r345203.

As part of this effort, convert all `CXXFLAGS+= -std=*` calls to use `CXXSTD`.

Notes:

This value is not sanity checked in bsd.sys.mk, however, given the two
most used C++ compilers on FreeBSD (clang++ and g++) support both modes, it is
likely to work with both toolchains. This method will be refined in the future
to support more variants of C++, as not all versions of clang++ and g++ (for
instance) support C++14, C++17, etc.

Any manual appending of `-std=*` to `CXXFLAGS` should be replaced with CXXSTD.
Example:

Before this commit:
```
CXXFLAGS+=	-std=c++14
```

After this commit:
```
CXXSTD=	c++14
```

Reviewed by:	asomers
Approved by:	emaste (mentor)
MFC after:	1 month
MFC with:	r345203, r345704, r345705
Relnotes:	yes
Tested with:	make tinderbox
Differential Revision:	https://reviews.freebsd.org/D19732
2019-03-29 18:31:48 +00:00
Enji Cooper
752cabaa1c Revert r345704
I accidentally committed code from two reviews. I will reintroduce the code to
bsd.progs.mk as part of a separate commit from r345704.

Approved by:	emaste (mentor, implicit)
MFC after:	2 months
MFC with:	r345704
2019-03-29 18:16:33 +00:00
Enji Cooper
9a41926bfb CXXSTD is the C++ analogue to CSTD.
CXXSTD defaults to `-std=c++11` with supporting compilers; `-std=gnu++98`,
otherwise for older versions of g++.

This change standardizes the CXXSTD variable, originally added to
googletest.test.inc.mk as part of r345203.

As part of this effort, convert all `CXXFLAGS+= -std=*` calls to use `CXXSTD`.

Notes:

This value is not sanity checked in bsd.sys.mk, however, given the two
most used C++ compilers on FreeBSD (clang++ and g++) support both modes, it is
likely to work with both toolchains. This method will be refined in the future
to support more variants of C++, as not all versions of clang++ and g++ (for
instance) support C++14, C++17, etc.

Any manual appending of `-std=*` to `CXXFLAGS` should be replaced with CXXSTD.
Example:

Before this commit:
```
CXXFLAGS+=	-std=c++14
```

After this commit:
```
CXXSTD=	c++14
```

Reviewed by:	asomers
Approved by:	emaste (mentor)
MFC after:	1 month
Relnotes:	yes
Differential Revision:	https://reviews.freebsd.org/D19732
2019-03-29 18:13:44 +00:00
Enji Cooper
fb72cf61ac Spam CXXFLAGS with -I${DESTDIR}/usr/include/private, instead of GTEST_CXXFLAGS
This makes it easier for googletest users to leverage googletest, instead of
forcing them to plug GTEST_CXXFLAGS into CXXFLAGS manually (resulting in
unnecessary duplication).

I will be following this up with a more proper fix in src.libnames.mk, as
src.libnames.mk should be automatically adding this directory to
CFLAGS/CXXFLAGS when private libraries are referenced. Not doing so can result
in mismatches between base-provided private library's and ports-provided
library's headers.

While here, tweak the comment to clarify what the intent is behind spamming
CXXFLAGS.

MFC after:	5 weeks
MFC with:	r345203
Reported by:	asomers
Reviewed by:	asomers
Approved by:	emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D19731
2019-03-28 17:22:31 +00:00
John Baldwin
ffad9893e7 Remove the TIMED src option from the list of options.
This was missed in r342139 when timed(8) was removed and fixes a
warning when running makeman to regenerate src.conf.5.

Differential Revision:	https://reviews.freebsd.org/D19486
2019-03-26 20:44:02 +00:00
Jung-uk Kim
0fa5ee1f53 Catch up with Clang 8.0. 2019-03-21 21:45:02 +00:00
Jung-uk Kim
f4590b8c3a Catch up with Clang 7.0.
MFC after:	3 days
2019-03-21 21:43:23 +00:00
Dimitry Andric
07302582b6 Turn on MK_OPENMP for i386 by default, now that it can build.
Noticed by:	jbeich
PR:		236062, 236582
MFC after:	1 month
X-MFC-With:	r344779
2019-03-19 06:58:28 +00:00
Dimitry Andric
b0840a28f6 Connect lib/libomp to the build.
* Set MK_OPENMP to yes by default only on amd64, for now.
* Bump __FreeBSD_version to signal this addition.
* Ensure gcc's conflicting omp.h is not installed if MK_OPENMP is yes.
* Update OptionalObsoleteFiles.inc to cope with the conflicting omp.h.
* Regenerate src.conf(5) with new WITH/WITHOUT fragments.

Relnotes:	yes
PR:		236062
MFC after:	1 month
X-MFC-With:	r344779
2019-03-16 15:45:15 +00:00
Enji Cooper
5193fcde8d Initial googlemock/googletest integration into the build/FreeBSD test suite
This initial integration takes googlemock/googletest release 1.8.1, integrates
the library, tests, and sample unit tests into the build.

googlemock/googletest's inclusion is optionally available via `MK_GOOGLETEST`.
`MK_GOOGLETEST` is dependent on `MK_TESTS` and is enabled by default when
built with a C++11 capable toolchain.

Google tests can be specified via the `GTESTS` variable, which, in comparison
with the other test drivers, is more simplified/streamlined, as Googletest only
supports C++ tests; not raw C or shell tests (C tests can be written in C++
using the standard embedding methods).

No dependent libraries are assumed for the tests. One must specify `gmock`,
`gmock_main`, `gtest`, or `gtest_main`, via `LIBADD` for the program.

More information about googlemock and googletest can be found on the
Googletest [project page](https://github.com/google/googletest), and the
[GoogleMock](https://github.com/google/googletest/blob/v1.8.x/googlemock/docs/Documentation.md)
and
[GoogleTest](https://github.com/google/googletest/tree/v1.8.x/googletest/docs)
docs.

These tests are originally integrated into the build as plain driver tests, but
will be natively integrated into Kyua in a later version.

Known issues/Errata:
* [WhenDynamicCastToTest.AmbiguousCast fails on FreeBSD](https://github.com/google/googletest/issues/2172)

Reviewed by:	asomers
Approved by:	emaste (mentor)
MFC after:	2 months
Differential Revision: https://reviews.freebsd.org/D19551
2019-03-15 21:43:52 +00:00
Enji Cooper
ff511f1f39 MFhead@r344996 2019-03-11 03:02:58 +00:00
John Baldwin
e91609a771 Divorce MK_GDB from MK_BINUTILS.
This permits legacy GDB to still be built and installed if
WITHOUT_BINUTILS is set (e.g. if base/binutils is installed).

Reviewed by:	emaste
MFC after:	2 weeks
Differential Revision:	https://reviews.freebsd.org/D19480
2019-03-06 20:13:02 +00:00
Marcin Wojtas
13ea0450a9 Extend libsecureboot(old libve) to obtain trusted certificates from UEFI and implement revocation
UEFI related headers were copied from edk2.

A new build option "MK_LOADER_EFI_SECUREBOOT" was added to allow
loading of trusted anchors from UEFI.

Certificate revocation support is also introduced.
The forbidden certificates are loaded from dbx variable.
Verification fails in two cases:

There is a direct match between cert in dbx and the one in the chain.
The CA used to sign the chain is found in dbx.
One can also insert a hash of TBS section of a certificate into dbx.
In this case verifications fails only if a direct match with a
certificate in chain is found.

Submitted by: Kornel Duleba <mindal@semihalf.com>
Reviewed by: sjg
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision:	https://reviews.freebsd.org/D19093
2019-03-06 06:39:42 +00:00
Enji Cooper
b18a4ccab9 MFhead@r344786 2019-03-05 01:00:38 +00:00
Simon J. Gerraty
a92958df34 Enable build of libbearssl
Reviewed by:	emaste
Sponsored by:	Juniper Networks
Differential Revision:	D16337
2019-02-26 06:11:01 +00:00
Ed Maste
e1157dcec4 Make libifconfig INTERNALLIB
Instead of PRIVATELIB + NO_PIC.  This avoids the need for the wlandebug
PIE special case added in r344211, and provides a stronger guarantee
against 3rd party software coming to depend on the API or ABI.

If / when we declare the API/ABI to be stable we can make it a normal
library.

Discussed with:	bapt
Sponsored by:	The FreeBSD Foundation
2019-02-25 18:22:20 +00:00
Enji Cooper
7b1136bd59 Remove redundant CXXFLAGS and fix constant names
- Specifying -std=c++11 and -frtti tweaks those flags with clang/gcc.
- The constants are prefixed with `GTEST_`, not `GTESTS_`.
2019-02-22 04:52:12 +00:00
Enji Cooper
1d4fb286a0 Move NO_WTHREAD_SAFETY to googletest.test.inc.mk
This variable is necessary to compile with googletest at a global level. Move
it there.
2019-02-21 06:49:20 +00:00
Enji Cooper
c1bcc48b3c Use gmock/gtest headers when PRIVATELIB is defined
The move to /usr/include/private prefixed paths seems to require a bit more
effort in order to compile programs.

Install the headers to /usr/include/private/g{mock,test}/... and automatically
include /usr/include/private in GTESTS_CXXFLAGS to make compilation seamless. I
will work on the more global problem later with @bdrewery.
2019-02-21 04:47:44 +00:00
Enji Cooper
900e7b9404 Fix a typo
A previous iteration referenced/used googletest.test.flags.mk, not
googletest.test.inc.mk. The latter name is what I settled on as this
Makefile snippet can include more logic than flags.
2019-02-21 03:36:09 +00:00
Enji Cooper
833018816d Correct gmock/gtest expectations w.r.t. C++11/RTTI
Long story short, some of the tests were failing because they expected either
dynamic_cast or RTTI to be functional and it wasn't.

Move all common CXXFLAGS out to googletest.test.inc.mk and reference it from
googletest.test.mk and .../googletest/Makefile.inc
2019-02-20 20:09:59 +00:00
Enji Cooper
d0527c3f06 Document GTESTS variable in googletest.test.mk 2019-02-20 01:12:59 +00:00
Enji Cooper
bd71398d1e Add googletest.test.mk and integrate into bsd.test.mk
googletest.test.mk is a rudimentary wrapper around the plain test interface
(for now), which only supports C++ programs, specified by the `GTESTS`
variable.

In the future, kyua will support gtests in a more native manner.
2019-02-20 01:09:03 +00:00
Enji Cooper
06beea0e7e MK_GOOGLETEST should be enabled/disabled based on MK_TESTS_SUPPORT
Making MK_GOOGLETEST rely on MK_TESTS makes it impossible to rely on in
buildworld, which is not desirable for items like `cddl/usr.sbin/zfsd/tests`.
2019-02-20 00:12:24 +00:00
Enji Cooper
4309e4b5b4 Fix typos
LIBGMOCK_MAIN and LIBGTEST_MAIN were missing corresponding underscores in the
variable names.
2019-02-20 00:10:56 +00:00
Enji Cooper
43e25f47a7 Add MK_GOOGLETEST option for building/installing gmock/gtest
These libraries don't compile on non-C++-11 capable compilers, e.g., g++ 4.2.1
and its corresponding implementation of the c++ library, i.e., libstdc++.

Blacklist compilation on all non-C++-11 capable compilers and give others the
option of opting out of building/installing gmock/gtest via MK_GOOGLETEST.

This option is controlled by MK_CXX and MK_TESTS, as ATF compilation is.
2019-02-19 22:40:32 +00:00