buffer is greater than 1. This triggered panics in at least one spot in
the kernel (the MAC Framework) which passes non-negative, rather than >1
buffer sizes based on the size of a user buffer passed into a system
call. While 0-size buffers aren't particularly useful, they also aren't
strictly incorrect, so loosen the assertion.
Discussed with: phk (fears I might be EDOOFUS but willing to go along)
Spotted by: pho + stress2
Approved by: re (kib)
is no relevant difference for sbufs, and it increases portability of
the source code.
Split the actual initialization of the sbuf into a separate local
function, so that certain static code checkers can understand
what sbuf_new() does, thus eliminating on silly annoyance of
MISRA compliance testing.
Contributed by: An anonymous company in the last business I
expected sbufs to invade.
choice of default size in the first place)
Reverse the order of arguments to the internal static sbuf_put_byte()
function to match everything else in this file.
Move sbuf_putc_func() inside the kernel version of sbuf_vprintf
where it belongs.
sbuf_putc() incorrectly used sbuf_putc_func() which supress NUL
characters, it should use sbuf_put_byte().
Make sbuf_finish() return -1 on error.
Minor stylistic nits fixed.
Add a drain function for struct sysctl_req, and use it for a variety
of handlers, some of which had to do awkward things to get a large
enough SBUF_FIXEDLEN buffer.
Note that some sysctl handlers were explicitly outputting a trailing
NUL byte. This behaviour was preserved, though it should not be
necessary.
Reviewed by: phk (original patch)
unexpected things in copyout(9) and so wiring the user buffer is not
sufficient to perform a copyout(9) while holding a random mutex.
Requested by: nwhitehorn
code associated with overflow or with the drain function. While this
function is not expected to be used often, it produces more information
in the form of an errno that sbuf_overflowed() did.
handlers, some of which had to do awkward things to get a large enough
FIXEDLEN buffer.
Note that some sysctl handlers were explicitly outputting a trailing NUL
byte. This behaviour was preserved, though it should not be necessary.
Reviewed by: phk
called when the sbuf internal buffer is filled. For kernel sbufs with a
drain, the internal buffer will never be expanded. For userland sbufs
with a drain, the internal buffer may still be expanded by
sbuf_[v]printf(3).
Sbufs now have three basic uses:
1) static string manipulation. Overflow is marked.
2) dynamic string manipulation. Overflow triggers string growth.
3) drained string manipulation. Overflow triggers draining.
In all cases the manipulation is 'safe' in that overflow is detected and
managed.
Reviewed by: phk (the previous version)
because we could fail due to a small buffer and loop and rerun. If this
happens, then the vsnprintf() will have already taken the arguments off
the va_list. For i386 and others, this doesn't matter because the
va_list type is a passed as a copy. But on powerpc and amd64, this is
fatal because the va_list is a reference to an external structure that
keeps the vararg state due to the more complicated argument passing system.
On amd64, arguments can be passed as follows:
First 6 int/pointer type arguments go in registers, the rest go on
the memory stack.
Float and double are similar, except using SSE registers.
long double (80 bit precision) are similar except using the x87 stack.
Where the 'next argument' comes from depends on how many have been
processed so far and what type it is. For amd64, gcc keeps this state
somewhere that is referenced by the va_list.
I found a description that showed the va_copy was required here:
http://mirrors.ccs.neu.edu/cgi-bin/unixhelp/man-cgi?va_end+9
The single unix spec doesn't mention va_copy() at all.
Anyway, the problem was that the sysctl kern.geom.conf* nodes would panic
due to walking off the end of the va_arg lists in vsnprintf. A better fix
would be to have sbuf_vprintf() use a single pass and call kvprintf()
with a callback function that stored the results and grew the buffer
as needed.
Approved by: re (scottl)
automatically extended to prevent overflow.
* Added sbuf_vprintf(); sbuf_printf() is now just a wrapper around
sbuf_vprintf().
* Include <stdio.h> and <string.h> when building libsbuf to silence
WARNS=4 warnings.
Reviewed by: des
Some of the major changes include:
- The SCSI error handling portion of cam_periph_error() has
been broken out into a number of subfunctions to better
modularize the code that handles the hierarchy of SCSI errors.
As a result, the code is now much easier to read.
- String handling and error printing has been significantly
revamped. We now use sbufs to do string formatting instead
of using printfs (for the kernel) and snprintf/strncat (for
userland) as before.
There is a new catchall error printing routine,
cam_error_print() and its string-based counterpart,
cam_error_string() that allow the kernel and userland
applications to pass in a CCB and have errors printed out
properly, whether or not they're SCSI errors. Among other
things, this helped eliminate a fair amount of duplicate code
in camcontrol.
We now print out more information than before, including
the CAM status and SCSI status and the error recovery action
taken to remedy the problem.
- sbufs are now available in userland, via libsbuf. This
change was necessary since most of the error printing code
is shared between libcam and the kernel.
- A new transfer settings interface is included in this checkin.
This code is #ifdef'ed out, and is primarily intended to aid
discussion with HBA driver authors on the final form the
interface should take. There is example code in the ahc(4)
driver that implements the HBA driver side of the new
interface. The new transfer settings code won't be enabled
until we're ready to switch all HBA drivers over to the new
interface.
src/Makefile.inc1,
lib/Makefile: Add libsbuf. It must be built before libcam,
since libcam uses sbuf routines.
libcam/Makefile: libcam now depends on libsbuf.
libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the
sbuf sources from sys/kern.
bsd.libnames.mk: Add LIBSBUF.
camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically
linked, we can't depend on the dynamic linker
to pull in libsbuf.
camcontrol.c: Use cam_error_print() instead of checking for
CAM_SCSI_STATUS_ERROR on every failed CCB.
sbuf.9: Change the prototypes for sbuf_cat() and
sbuf_cpy() so that the source string is now a
const char *. This is more in line wth the
standard system string functions, and helps
eliminate warnings when dealing with a const
source buffer.
Fix a typo.
cam.c: Add description strings for the various CAM
error status values, as well as routines to
look up those strings.
Add new cam_error_string() and
cam_error_print() routines for userland and
the kernel.
cam.h: Add a new CAM flag, CAM_RETRY_SELTO.
Add enumerated types for the various options
available with cam_error_print() and
cam_error_string().
cam_ccb.h: Add new transfer negotiation structures/types.
Change inq_len in the ccb_getdev structure to
be "reserved". This field has never been
filled in, and will be removed when we next
bump the CAM version.
cam_debug.h: Fix typo.
cam_periph.c: Modularize cam_periph_error(). The SCSI error
handling part of cam_periph_error() is now
in camperiphscsistatuserror() and
camperiphscsisenseerror().
In cam_periph_lock(), increase the reference
count on the periph while we wait for our lock
attempt to succeed so that the periph won't go
away while we're sleeping.
cam_xpt.c: Add new transfer negotiation code. (ifdefed
out)
Add a new function, xpt_path_string(). This
is a string/sbuf analog to xpt_print_path().
scsi_all.c: Revamp string handing and error printing code.
We now use sbufs for much of the string
formatting code. More of that code is shared
between userland the kernel.
scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly
useful in the first place.
Add a new error action, SS_REQSENSE. (Send a
request sense and then retry the command.)
This is useful when the controller hasn't
performed autosense for some reason.
Change the default actions around a bit.
scsi_cd.c,
scsi_da.c,
scsi_pt.c,
scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection
timeouts shouldn't be covered by a sense flag.
scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO.
Get rid of the last vestiges of a read/write
interface.
libkern/bsearch.c,
sys/libkern.h,
conf/files: Add bsearch.c, which is needed for some of the
new table lookup routines.
aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if
CAM_NEW_TRAN_CODE is defined.
sbuf.h,
subr_sbuf.c: Add the appropriate #ifdefs so sbufs can
compile and run in userland.
Change sbuf_printf() to use vsnprintf()
instead of kvprintf(), which is only available
in the kernel.
Change the source string for sbuf_cpy() and
sbuf_cat() to be a const char *.
Add __BEGIN_DECLS and __END_DECLS around
function prototypes since they're now exported
to userland.
kdump/mkioctls: Include stdio.h before cam.h since cam.h now
includes a function with a FILE * argument.
Submitted by: gibbs (mostly)
Reviewed by: jdp, marcel (libsbuf makefile changes)
Reviewed by: des (sbuf changes)
Reviewed by: ken
